xref: /openbmc/u-boot/configs/display5_defconfig (revision a3b36c84)
1CONFIG_ARM=y
2CONFIG_ARCH_MX6=y
3CONFIG_SPL_GPIO_SUPPORT=y
4CONFIG_SPL_LIBCOMMON_SUPPORT=y
5CONFIG_SPL_LIBGENERIC_SUPPORT=y
6CONFIG_TARGET_DISPLAY5=y
7CONFIG_SPL_MMC_SUPPORT=y
8CONFIG_SPL_SERIAL_SUPPORT=y
9CONFIG_SPL_SPI_FLASH_SUPPORT=y
10CONFIG_SPL_SPI_SUPPORT=y
11CONFIG_DEFAULT_DEVICE_TREE="imx6q-display5"
12CONFIG_FIT=y
13CONFIG_SPL_LOAD_FIT=y
14CONFIG_OF_BOARD_SETUP=y
15CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q"
16CONFIG_SPL=y
17# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
18CONFIG_SPL_DMA_SUPPORT=y
19CONFIG_SPL_ENV_SUPPORT=y
20CONFIG_SPL_SAVEENV=y
21CONFIG_SPL_I2C_SUPPORT=y
22CONFIG_SPL_OS_BOOT=y
23CONFIG_HUSH_PARSER=y
24CONFIG_SYS_PROMPT="display5 > "
25CONFIG_CMD_BOOTZ=y
26# CONFIG_CMD_ELF is not set
27CONFIG_CMD_ASKENV=y
28CONFIG_CRC32_VERIFY=y
29CONFIG_CMD_EEPROM=y
30# CONFIG_CMD_FPGA is not set
31CONFIG_CMD_GPIO=y
32CONFIG_CMD_I2C=y
33CONFIG_CMD_MMC=y
34CONFIG_CMD_PART=y
35CONFIG_CMD_SF=y
36CONFIG_CMD_SPI=y
37CONFIG_CMD_DHCP=y
38CONFIG_CMD_MII=y
39CONFIG_CMD_PING=y
40CONFIG_CMD_CACHE=y
41CONFIG_CMD_TIME=y
42CONFIG_CMD_EXT2=y
43CONFIG_CMD_EXT4=y
44CONFIG_CMD_FAT=y
45CONFIG_CMD_FS_GENERIC=y
46CONFIG_CMD_MTDPARTS=y
47CONFIG_MTDIDS_DEFAULT="nor0=02008000.spi.1"
48CONFIG_MTDPARTS_DEFAULT="mtdparts=02008000.spi.1:128k(SPL),1m(u-boot),64k(env1),64k(env2),8m(lin-recovery),4m(swu-kernel),8m(swu-initramfs),-(reserved)"
49CONFIG_EFI_PARTITION=y
50# CONFIG_SPL_EFI_PARTITION is not set
51CONFIG_OF_CONTROL=y
52CONFIG_ENV_IS_IN_SPI_FLASH=y
53CONFIG_SPI_FLASH=y
54CONFIG_SPI_FLASH_BAR=y
55CONFIG_SPI_FLASH_SPANSION=y
56CONFIG_SPI_FLASH_STMICRO=y
57CONFIG_PHYLIB=y
58CONFIG_PHY_MARVELL=y
59CONFIG_NETDEVICES=y
60CONFIG_FEC_MXC=y
61# CONFIG_SPL_DM_SERIAL is not set
62CONFIG_MXC_UART=y
63