1CONFIG_ARM=y 2CONFIG_SYS_THUMB_BUILD=y 3# CONFIG_SPL_USE_ARCH_MEMCPY is not set 4# CONFIG_SPL_USE_ARCH_MEMSET is not set 5CONFIG_ARCH_AT91=y 6CONFIG_SYS_TEXT_BASE=0x72000000 7CONFIG_TARGET_CORVUS=y 8CONFIG_SPL_GPIO_SUPPORT=y 9CONFIG_SPL_LIBCOMMON_SUPPORT=y 10CONFIG_SPL_LIBGENERIC_SUPPORT=y 11CONFIG_SYS_MALLOC_F_LEN=0x800 12CONFIG_SPL_SERIAL_SUPPORT=y 13CONFIG_SPL=y 14CONFIG_NR_DRAM_BANKS=1 15CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH" 16CONFIG_BOOTDELAY=3 17CONFIG_USE_BOOTARGS=y 18CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" 19# CONFIG_DISPLAY_BOARDINFO is not set 20CONFIG_BOARD_EARLY_INIT_F=y 21CONFIG_SPL_NAND_SUPPORT=y 22CONFIG_HUSH_PARSER=y 23CONFIG_SYS_PROMPT="U-Boot> " 24# CONFIG_CMD_BDI is not set 25CONFIG_CMD_BOOTZ=y 26# CONFIG_CMD_IMI is not set 27CONFIG_CMD_DFU=y 28CONFIG_CMD_GPIO=y 29# CONFIG_CMD_LOADS is not set 30CONFIG_CMD_NAND=y 31CONFIG_CMD_USB=y 32# CONFIG_CMD_SOURCE is not set 33# CONFIG_CMD_SETEXPR is not set 34CONFIG_CMD_DHCP=y 35CONFIG_CMD_PING=y 36CONFIG_CMD_MTDPARTS=y 37CONFIG_OF_CONTROL=y 38CONFIG_OF_EMBED=y 39CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus" 40CONFIG_ENV_IS_IN_NAND=y 41CONFIG_CLK=y 42CONFIG_CLK_AT91=y 43CONFIG_DFU_NAND=y 44# CONFIG_MMC is not set 45CONFIG_NAND=y 46CONFIG_NAND_ATMEL=y 47CONFIG_PHYLIB=y 48CONFIG_ATMEL_USART=y 49CONFIG_USB=y 50CONFIG_USB_EHCI_HCD=y 51CONFIG_USB_STORAGE=y 52CONFIG_USB_GADGET=y 53CONFIG_USB_GADGET_MANUFACTURER="Siemens AG" 54CONFIG_USB_GADGET_VENDOR_NUM=0x0908 55CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2 56CONFIG_USB_GADGET_ATMEL_USBA=y 57CONFIG_USB_GADGET_DOWNLOAD=y 58# CONFIG_EFI_LOADER is not set 59