xref: /openbmc/u-boot/configs/corvus_defconfig (revision bb737ced)
1CONFIG_ARM=y
2# CONFIG_SPL_USE_ARCH_MEMCPY is not set
3# CONFIG_SPL_USE_ARCH_MEMSET is not set
4CONFIG_ARCH_AT91=y
5CONFIG_TARGET_CORVUS=y
6CONFIG_SPL_GPIO_SUPPORT=y
7CONFIG_SPL_LIBCOMMON_SUPPORT=y
8CONFIG_SPL_LIBGENERIC_SUPPORT=y
9CONFIG_SYS_MALLOC_F_LEN=0x800
10CONFIG_SPL_SERIAL_SUPPORT=y
11CONFIG_SPL_NAND_SUPPORT=y
12CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus"
13CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH"
14CONFIG_BOOTDELAY=3
15CONFIG_USE_BOOTARGS=y
16CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
17# CONFIG_DISPLAY_BOARDINFO is not set
18CONFIG_BOARD_EARLY_INIT_F=y
19CONFIG_SPL=y
20CONFIG_HUSH_PARSER=y
21CONFIG_SYS_PROMPT="U-Boot> "
22# CONFIG_CMD_BDI is not set
23CONFIG_CMD_BOOTZ=y
24# CONFIG_CMD_IMI is not set
25# CONFIG_CMD_IMLS is not set
26CONFIG_CMD_DFU=y
27# CONFIG_CMD_FPGA is not set
28CONFIG_CMD_GPIO=y
29# CONFIG_CMD_LOADS is not set
30CONFIG_CMD_NAND=y
31CONFIG_CMD_USB=y
32# CONFIG_CMD_SOURCE is not set
33# CONFIG_CMD_SETEXPR is not set
34CONFIG_CMD_DHCP=y
35CONFIG_CMD_PING=y
36CONFIG_CMD_MTDPARTS=y
37CONFIG_OF_CONTROL=y
38CONFIG_OF_EMBED=y
39CONFIG_ENV_IS_IN_NAND=y
40CONFIG_CLK=y
41CONFIG_CLK_AT91=y
42CONFIG_AT91_UTMI=y
43CONFIG_DFU_NAND=y
44# CONFIG_MMC is not set
45CONFIG_PHYLIB=y
46# CONFIG_SPL_DM_SERIAL is not set
47CONFIG_ATMEL_USART=y
48CONFIG_USB=y
49CONFIG_USB_EHCI_HCD=y
50CONFIG_USB_STORAGE=y
51CONFIG_USB_GADGET=y
52CONFIG_USB_GADGET_ATMEL_USBA=y
53CONFIG_USB_GADGET_DOWNLOAD=y
54CONFIG_G_DNL_MANUFACTURER="Siemens AG"
55CONFIG_G_DNL_VENDOR_NUM=0x0908
56CONFIG_G_DNL_PRODUCT_NUM=0x02d2
57# CONFIG_EFI_LOADER is not set
58