1CONFIG_ARM=y 2# CONFIG_SPL_USE_ARCH_MEMCPY is not set 3# CONFIG_SPL_USE_ARCH_MEMSET is not set 4CONFIG_ARCH_AT91=y 5CONFIG_TARGET_CORVUS=y 6CONFIG_SPL_GPIO_SUPPORT=y 7CONFIG_SPL_LIBCOMMON_SUPPORT=y 8CONFIG_SPL_LIBGENERIC_SUPPORT=y 9CONFIG_SYS_MALLOC_F_LEN=0x800 10CONFIG_SPL_SERIAL_SUPPORT=y 11CONFIG_SPL_NAND_SUPPORT=y 12CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus" 13CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH" 14CONFIG_BOOTDELAY=3 15CONFIG_USE_BOOTARGS=y 16CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" 17# CONFIG_DISPLAY_BOARDINFO is not set 18CONFIG_BOARD_EARLY_INIT_F=y 19CONFIG_SPL=y 20CONFIG_HUSH_PARSER=y 21CONFIG_SYS_PROMPT="U-Boot> " 22# CONFIG_CMD_BDI is not set 23CONFIG_CMD_BOOTZ=y 24# CONFIG_CMD_IMI is not set 25# CONFIG_CMD_IMLS is not set 26CONFIG_CMD_DFU=y 27# CONFIG_CMD_FPGA is not set 28CONFIG_CMD_GPIO=y 29# CONFIG_CMD_LOADS is not set 30CONFIG_CMD_NAND=y 31CONFIG_CMD_USB=y 32# CONFIG_CMD_SOURCE is not set 33# CONFIG_CMD_SETEXPR is not set 34CONFIG_CMD_DHCP=y 35CONFIG_CMD_PING=y 36CONFIG_CMD_MTDPARTS=y 37CONFIG_OF_CONTROL=y 38CONFIG_OF_EMBED=y 39CONFIG_ENV_IS_IN_NAND=y 40CONFIG_CLK=y 41CONFIG_CLK_AT91=y 42CONFIG_AT91_UTMI=y 43CONFIG_DFU_NAND=y 44# CONFIG_MMC is not set 45CONFIG_PHYLIB=y 46# CONFIG_SPL_DM_SERIAL is not set 47CONFIG_ATMEL_USART=y 48CONFIG_USB=y 49CONFIG_USB_EHCI_HCD=y 50CONFIG_USB_STORAGE=y 51CONFIG_USB_GADGET=y 52CONFIG_USB_GADGET_ATMEL_USBA=y 53CONFIG_USB_GADGET_DOWNLOAD=y 54CONFIG_G_DNL_MANUFACTURER="Siemens AG" 55CONFIG_G_DNL_VENDOR_NUM=0x0908 56CONFIG_G_DNL_PRODUCT_NUM=0x02d2 57# CONFIG_EFI_LOADER is not set 58