xref: /openbmc/u-boot/configs/corvus_defconfig (revision 8eef803a)
1CONFIG_ARM=y
2CONFIG_SYS_THUMB_BUILD=y
3# CONFIG_SPL_USE_ARCH_MEMCPY is not set
4# CONFIG_SPL_USE_ARCH_MEMSET is not set
5CONFIG_ARCH_AT91=y
6CONFIG_SYS_TEXT_BASE=0x72000000
7CONFIG_TARGET_CORVUS=y
8CONFIG_SPL_GPIO_SUPPORT=y
9CONFIG_SPL_LIBCOMMON_SUPPORT=y
10CONFIG_SPL_LIBGENERIC_SUPPORT=y
11CONFIG_SYS_MALLOC_F_LEN=0x800
12CONFIG_SPL_SERIAL_SUPPORT=y
13CONFIG_SPL=y
14CONFIG_NR_DRAM_BANKS=1
15CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH"
16CONFIG_BOOTDELAY=3
17CONFIG_USE_BOOTARGS=y
18CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
19# CONFIG_DISPLAY_BOARDINFO is not set
20CONFIG_BOARD_EARLY_INIT_F=y
21CONFIG_SPL_NAND_SUPPORT=y
22CONFIG_HUSH_PARSER=y
23CONFIG_SYS_PROMPT="U-Boot> "
24# CONFIG_CMD_BDI is not set
25CONFIG_CMD_BOOTZ=y
26# CONFIG_CMD_IMI is not set
27CONFIG_CMD_DFU=y
28CONFIG_CMD_GPIO=y
29# CONFIG_CMD_LOADS is not set
30CONFIG_CMD_NAND=y
31CONFIG_CMD_USB=y
32# CONFIG_CMD_SOURCE is not set
33# CONFIG_CMD_SETEXPR is not set
34CONFIG_CMD_DHCP=y
35CONFIG_CMD_PING=y
36CONFIG_CMD_MTDPARTS=y
37CONFIG_OF_CONTROL=y
38CONFIG_OF_EMBED=y
39CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus"
40CONFIG_ENV_IS_IN_NAND=y
41CONFIG_CLK=y
42CONFIG_CLK_AT91=y
43CONFIG_DFU_NAND=y
44# CONFIG_MMC is not set
45CONFIG_NAND=y
46CONFIG_NAND_ATMEL=y
47CONFIG_PHYLIB=y
48CONFIG_ATMEL_USART=y
49CONFIG_USB=y
50CONFIG_USB_EHCI_HCD=y
51CONFIG_USB_STORAGE=y
52CONFIG_USB_GADGET=y
53CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
54CONFIG_USB_GADGET_VENDOR_NUM=0x0908
55CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
56CONFIG_USB_GADGET_ATMEL_USBA=y
57CONFIG_USB_GADGET_DOWNLOAD=y
58# CONFIG_EFI_LOADER is not set
59