xref: /openbmc/u-boot/configs/axm_defconfig (revision c66f5620)
1CONFIG_ARM=y
2CONFIG_SPL_SYS_THUMB_BUILD=y
3# CONFIG_SPL_USE_ARCH_MEMCPY is not set
4# CONFIG_SPL_USE_ARCH_MEMSET is not set
5CONFIG_ARCH_AT91=y
6CONFIG_SYS_TEXT_BASE=0x21000000
7CONFIG_TARGET_TAURUS=y
8CONFIG_SPL_GPIO_SUPPORT=y
9CONFIG_SPL_LIBCOMMON_SUPPORT=y
10CONFIG_SPL_LIBGENERIC_SUPPORT=y
11CONFIG_SPL_SERIAL_SUPPORT=y
12CONFIG_SPL_NAND_SUPPORT=y
13CONFIG_SPL_SPI_FLASH_SUPPORT=y
14CONFIG_SPL_SPI_SUPPORT=y
15CONFIG_SPL=y
16CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus"
17CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2068,BOARD_AXM"
18CONFIG_BOOTDELAY=3
19CONFIG_USE_BOOTARGS=y
20CONFIG_BOOTARGS="\0addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}::off\0addtest=setenv bootargs ${bootargs} loglevel=4 test\0baudrate=115200\0boot_file=setenv bootfile /${project_dir}/kernel/uImage\0boot_retries=0\0bootcmd=run flash_self\0bootdelay=3\0ethact=macb0\0flash_nfs=run nand_kernel;run nfsargs;run addip;upgrade_available;bootm ${kernel_ram};reset\0flash_self=run nand_kernel;run setbootargs;upgrade_available;bootm ${kernel_ram};reset\0flash_self_test=run nand_kernel;run setbootargs addtest; upgrade_available;bootm ${kernel_ram};reset\0hostname=systemone\0kernel_Off=0x00200000\0kernel_Off_fallback=0x03800000\0kernel_ram=0x21500000\0kernel_size=0x00400000\0kernel_size_fallback=0x00400000\0loads_echo=1\0nand_kernel=nand read.e ${kernel_ram} ${kernel_Off} ${kernel_size}\0net_nfs=run boot_file;tftp ${kernel_ram} ${bootfile};run nfsargs;run addip;upgrade_available;bootm ${kernel_ram};reset\0netdev=eth0\0nfsargs=run root_path;setenv bootargs ${bootargs} root=/dev/nfs rw nfsroot=${serverip}:${rootpath} at91sam9_wdt.wdt_timeout=16\0partitionset_active=A\0preboot=echo;echo Type 'run flash_self' to use kernel and root filesystem on memory;echo Type 'run flash_nfs' to use kernel from memory and root filesystem over NFS;echo Type 'run net_nfs' to get Kernel over TFTP and mount root filesystem over NFS;echo\0project_dir=systemone\0root_path=setenv rootpath /home/projects/${project_dir}/rootfs\0rootfs=/dev/mtdblock5\0rootfs_fallback=/dev/mtdblock7\0setbootargs=setenv bootargs ${bootargs} console=ttyMTD,mtdoops root=${rootfs} rootfstype=jffs2 panic=7 at91sam9_wdt.wdt_timeout=16\0stderr=serial\0stdin=serial\0stdout=serial\0upgrade_available=0\0"
21# CONFIG_DISPLAY_BOARDINFO is not set
22CONFIG_BOARD_EARLY_INIT_F=y
23CONFIG_SPL_SPI_LOAD=y
24CONFIG_HUSH_PARSER=y
25# CONFIG_CMD_BDI is not set
26CONFIG_CMD_BOOTZ=y
27# CONFIG_CMD_IMI is not set
28# CONFIG_CMD_LOADS is not set
29CONFIG_CMD_NAND=y
30CONFIG_CMD_SF=y
31CONFIG_CMD_SPI=y
32# CONFIG_CMD_SOURCE is not set
33# CONFIG_CMD_SETEXPR is not set
34CONFIG_CMD_DHCP=y
35CONFIG_CMD_PING=y
36CONFIG_OF_CONTROL=y
37CONFIG_OF_EMBED=y
38CONFIG_ENV_IS_IN_NAND=y
39# CONFIG_MMC is not set
40CONFIG_SPI_FLASH=y
41CONFIG_SPI_FLASH_STMICRO=y
42CONFIG_PHYLIB=y
43CONFIG_USE_TINY_PRINTF=y
44