1CONFIG_ARM=y
2CONFIG_ARCH_AT91=y
3CONFIG_SYS_TEXT_BASE=0x73f00000
4CONFIG_TARGET_AT91SAM9M10G45EK=y
5CONFIG_SYS_MALLOC_F_LEN=0x2000
6CONFIG_DEBUG_UART_BOARD_INIT=y
7CONFIG_DEBUG_UART_BASE=0xffffee00
8CONFIG_DEBUG_UART_CLOCK=132000000
9CONFIG_DEFAULT_DEVICE_TREE="at91sam9m10g45ek"
10CONFIG_DEBUG_UART=y
11CONFIG_NAND_BOOT=y
12CONFIG_BOOTDELAY=3
13CONFIG_USE_BOOTARGS=y
14CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
15# CONFIG_CONSOLE_MUX is not set
16CONFIG_SYS_CONSOLE_IS_IN_ENV=y
17# CONFIG_DISPLAY_BOARDINFO is not set
18CONFIG_HUSH_PARSER=y
19CONFIG_SYS_PROMPT="U-Boot> "
20# CONFIG_CMD_BDI is not set
21CONFIG_CMD_BOOTZ=y
22# CONFIG_CMD_IMI is not set
23# CONFIG_CMD_FLASH is not set
24# CONFIG_CMD_LOADS is not set
25CONFIG_CMD_MMC=y
26CONFIG_CMD_NAND=y
27CONFIG_CMD_USB=y
28# CONFIG_CMD_SETEXPR is not set
29CONFIG_CMD_DHCP=y
30CONFIG_CMD_PING=y
31CONFIG_CMD_FAT=y
32CONFIG_OF_CONTROL=y
33CONFIG_ENV_IS_IN_NAND=y
34CONFIG_DM=y
35CONFIG_CLK=y
36CONFIG_CLK_AT91=y
37CONFIG_DM_GPIO=y
38CONFIG_AT91_GPIO=y
39CONFIG_DM_MMC=y
40CONFIG_GENERIC_ATMEL_MCI=y
41CONFIG_NAND_ATMEL=y
42CONFIG_DM_ETH=y
43CONFIG_MACB=y
44CONFIG_PINCTRL=y
45CONFIG_PINCTRL_AT91=y
46CONFIG_DM_SERIAL=y
47CONFIG_DEBUG_UART_ATMEL=y
48CONFIG_DEBUG_UART_ANNOUNCE=y
49CONFIG_ATMEL_USART=y
50CONFIG_TIMER=y
51CONFIG_ATMEL_PIT_TIMER=y
52CONFIG_USB=y
53CONFIG_DM_USB=y
54CONFIG_USB_EHCI_HCD=y
55CONFIG_USB_STORAGE=y
56CONFIG_LCD=y
57