1CONFIG_ARM=y
2CONFIG_ARCH_AT91=y
3CONFIG_TARGET_AT91SAM9M10G45EK=y
4CONFIG_SYS_MALLOC_F_LEN=0x2000
5CONFIG_DEFAULT_DEVICE_TREE="at91sam9m10g45ek"
6CONFIG_DEBUG_UART=y
7CONFIG_NAND_BOOT=y
8CONFIG_BOOTDELAY=3
9CONFIG_USE_BOOTARGS=y
10CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
11# CONFIG_CONSOLE_MUX is not set
12CONFIG_SYS_CONSOLE_IS_IN_ENV=y
13# CONFIG_DISPLAY_BOARDINFO is not set
14CONFIG_HUSH_PARSER=y
15CONFIG_SYS_PROMPT="U-Boot> "
16# CONFIG_CMD_BDI is not set
17CONFIG_CMD_BOOTZ=y
18# CONFIG_CMD_IMI is not set
19# CONFIG_CMD_FLASH is not set
20# CONFIG_CMD_FPGA is not set
21# CONFIG_CMD_LOADS is not set
22CONFIG_CMD_MMC=y
23CONFIG_CMD_NAND=y
24CONFIG_CMD_USB=y
25# CONFIG_CMD_SETEXPR is not set
26CONFIG_CMD_DHCP=y
27CONFIG_CMD_PING=y
28CONFIG_CMD_FAT=y
29CONFIG_OF_CONTROL=y
30CONFIG_ENV_IS_IN_NAND=y
31CONFIG_DM=y
32CONFIG_CLK=y
33CONFIG_CLK_AT91=y
34CONFIG_DM_GPIO=y
35CONFIG_AT91_GPIO=y
36CONFIG_DM_MMC=y
37CONFIG_GENERIC_ATMEL_MCI=y
38CONFIG_DM_ETH=y
39CONFIG_MACB=y
40CONFIG_PINCTRL=y
41CONFIG_PINCTRL_AT91=y
42CONFIG_DM_SERIAL=y
43CONFIG_DEBUG_UART_ATMEL=y
44CONFIG_DEBUG_UART_BASE=0xffffee00
45CONFIG_DEBUG_UART_CLOCK=132000000
46CONFIG_DEBUG_UART_BOARD_INIT=y
47CONFIG_DEBUG_UART_ANNOUNCE=y
48CONFIG_ATMEL_USART=y
49CONFIG_TIMER=y
50CONFIG_ATMEL_PIT_TIMER=y
51CONFIG_USB=y
52CONFIG_DM_USB=y
53CONFIG_USB_EHCI_HCD=y
54CONFIG_USB_STORAGE=y
55CONFIG_LCD=y
56