1CONFIG_ARM=y
2CONFIG_ARCH_AT91=y
3CONFIG_SYS_TEXT_BASE=0x21f00000
4CONFIG_TARGET_AT91SAM9260EK=y
5CONFIG_SYS_MALLOC_F_LEN=0x2000
6CONFIG_DEBUG_UART_BOARD_INIT=y
7CONFIG_DEBUG_UART_BASE=0xfffff200
8CONFIG_DEBUG_UART_CLOCK=132000000
9CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20ek_2mmc"
10CONFIG_DEBUG_UART=y
11CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_NANDFLASH"
12CONFIG_BOOTDELAY=3
13CONFIG_USE_BOOTARGS=y
14CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
15# CONFIG_DISPLAY_BOARDINFO is not set
16CONFIG_SYS_PROMPT="U-Boot> "
17# CONFIG_CMD_BDI is not set
18CONFIG_CMD_BOOTZ=y
19# CONFIG_CMD_IMI is not set
20# CONFIG_CMD_LOADS is not set
21CONFIG_CMD_MMC=y
22CONFIG_CMD_NAND=y
23CONFIG_CMD_SF=y
24CONFIG_CMD_USB=y
25# CONFIG_CMD_SOURCE is not set
26# CONFIG_CMD_SETEXPR is not set
27CONFIG_CMD_DHCP=y
28CONFIG_CMD_PING=y
29CONFIG_CMD_FAT=y
30CONFIG_OF_CONTROL=y
31CONFIG_ENV_IS_IN_NAND=y
32CONFIG_DM=y
33CONFIG_CLK=y
34CONFIG_CLK_AT91=y
35CONFIG_DM_GPIO=y
36CONFIG_AT91_GPIO=y
37CONFIG_DM_MMC=y
38CONFIG_GENERIC_ATMEL_MCI=y
39CONFIG_DM_SPI_FLASH=y
40CONFIG_SPI_FLASH=y
41CONFIG_SPI_FLASH_ATMEL=y
42CONFIG_SPI_FLASH_DATAFLASH=y
43CONFIG_DM_ETH=y
44CONFIG_MACB=y
45CONFIG_PINCTRL=y
46CONFIG_PINCTRL_AT91=y
47CONFIG_DM_SERIAL=y
48CONFIG_DEBUG_UART_ATMEL=y
49CONFIG_DEBUG_UART_ANNOUNCE=y
50CONFIG_ATMEL_USART=y
51CONFIG_SPI=y
52CONFIG_DM_SPI=y
53CONFIG_TIMER=y
54CONFIG_ATMEL_PIT_TIMER=y
55CONFIG_USB=y
56CONFIG_DM_USB=y
57CONFIG_USB_STORAGE=y
58