1CONFIG_ARM=y 2CONFIG_ARCH_AT91=y 3CONFIG_SYS_TEXT_BASE=0x21f00000 4CONFIG_TARGET_AT91SAM9261EK=y 5CONFIG_SYS_MALLOC_F_LEN=0x2000 6CONFIG_DEBUG_UART_BOARD_INIT=y 7CONFIG_DEBUG_UART_BASE=0xfffff200 8CONFIG_DEBUG_UART_CLOCK=100000000 9CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek" 10CONFIG_DEBUG_UART=y 11CONFIG_NR_DRAM_BANKS=1 12CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_NANDFLASH" 13CONFIG_BOOTDELAY=3 14CONFIG_USE_BOOTARGS=y 15CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" 16# CONFIG_CONSOLE_MUX is not set 17CONFIG_SYS_CONSOLE_IS_IN_ENV=y 18# CONFIG_DISPLAY_BOARDINFO is not set 19CONFIG_SYS_PROMPT="U-Boot> " 20# CONFIG_CMD_BDI is not set 21# CONFIG_CMD_IMI is not set 22# CONFIG_CMD_LOADS is not set 23CONFIG_CMD_NAND=y 24CONFIG_CMD_SF=y 25CONFIG_CMD_USB=y 26# CONFIG_CMD_SOURCE is not set 27# CONFIG_CMD_SETEXPR is not set 28CONFIG_CMD_DHCP=y 29CONFIG_CMD_PING=y 30CONFIG_CMD_FAT=y 31CONFIG_OF_CONTROL=y 32CONFIG_ENV_IS_IN_NAND=y 33CONFIG_DM=y 34CONFIG_CLK=y 35CONFIG_CLK_AT91=y 36CONFIG_DM_GPIO=y 37CONFIG_AT91_GPIO=y 38# CONFIG_MMC is not set 39CONFIG_NAND=y 40CONFIG_NAND_ATMEL=y 41CONFIG_DM_SPI_FLASH=y 42CONFIG_SPI_FLASH=y 43CONFIG_SPI_FLASH_ATMEL=y 44CONFIG_SPI_FLASH_DATAFLASH=y 45CONFIG_PINCTRL=y 46CONFIG_PINCTRL_AT91=y 47CONFIG_DM_SERIAL=y 48CONFIG_DEBUG_UART_ATMEL=y 49CONFIG_DEBUG_UART_ANNOUNCE=y 50CONFIG_ATMEL_USART=y 51CONFIG_SPI=y 52CONFIG_DM_SPI=y 53CONFIG_TIMER=y 54CONFIG_ATMEL_PIT_TIMER=y 55CONFIG_USB=y 56CONFIG_USB_STORAGE=y 57CONFIG_LCD=y 58