1CONFIG_ARM=y
2CONFIG_ARCH_SUNXI=y
3CONFIG_MACH_SUN6I=y
4CONFIG_DRAM_CLK=360
5CONFIG_DRAM_ZQ=122
6CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
7CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
8CONFIG_AXP_GPIO=y
9CONFIG_VIDEO_LCD_MODE="x:768,y:1024,depth:18,pclk_khz:66000,le:56,ri:60,up:30,lo:36,hs:64,vs:50,sync:3,vmode:0"
10CONFIG_VIDEO_LCD_BL_EN="PA25"
11CONFIG_VIDEO_LCD_BL_PWM="PH13"
12CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y
13CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-primo81"
14# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
15CONFIG_SPL=y
16# CONFIG_CMD_IMLS is not set
17# CONFIG_CMD_FLASH is not set
18# CONFIG_CMD_FPGA is not set
19# CONFIG_SPL_DOS_PARTITION is not set
20# CONFIG_SPL_ISO_PARTITION is not set
21# CONFIG_SPL_EFI_PARTITION is not set
22CONFIG_AXP_DLDO1_VOLT=3300
23# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
24CONFIG_USB_MUSB_HOST=y
25CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
26CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27
27CONFIG_VIDEO_LCD_SSD2828_RESET="PA26"
28CONFIG_VIDEO_LCD_SPI_CS="PH9"
29CONFIG_VIDEO_LCD_SPI_SCLK="PH10"
30CONFIG_VIDEO_LCD_SPI_MOSI="PH11"
31CONFIG_VIDEO_LCD_SPI_MISO="PH12"
32