1CONFIG_ARM=y 2CONFIG_ARCH_SUNXI=y 3CONFIG_MACH_SUN6I=y 4CONFIG_DRAM_CLK=240 5CONFIG_DRAM_ZQ=251 6CONFIG_USB1_VBUS_PIN="" 7CONFIG_I2C0_ENABLE=y 8CONFIG_AXP_GPIO=y 9CONFIG_VIDEO_LCD_MODE="x:2048,y:1536,depth:24,pclk_khz:208000,le:5,ri:150,up:9,lo:24,hs:5,vs:1,sync:3,vmode:0" 10CONFIG_VIDEO_LCD_DCLK_PHASE=0 11CONFIG_VIDEO_LCD_POWER="PH27" 12CONFIG_VIDEO_LCD_BL_EN="PM1" 13CONFIG_VIDEO_LCD_BL_PWM="PH13" 14CONFIG_VIDEO_LCD_PANEL_I2C_SDA="PA23" 15CONFIG_VIDEO_LCD_PANEL_I2C_SCL="PA24" 16CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y 17CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus" 18# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set 19CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII" 20CONFIG_SPL=y 21# CONFIG_CMD_IMLS is not set 22# CONFIG_CMD_FLASH is not set 23# CONFIG_CMD_FPGA is not set 24# CONFIG_SPL_DOS_PARTITION is not set 25# CONFIG_SPL_ISO_PARTITION is not set 26# CONFIG_SPL_EFI_PARTITION is not set 27CONFIG_ETH_DESIGNWARE=y 28CONFIG_AXP_ALDO1_VOLT=3300 29CONFIG_USB_EHCI_HCD=y 30