1 /* 2 * Most of this source has been derived from the Linux USB 3 * project: 4 * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) 5 * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org) 6 * (c) 1999 Michael Gee (michael@linuxspecific.com) 7 * (c) 2000 Yggdrasil Computing, Inc. 8 * 9 * 10 * Adapted for U-Boot: 11 * (C) Copyright 2001 Denis Peter, MPL AG Switzerland 12 * 13 * For BBB support (C) Copyright 2003 14 * Gary Jennejohn, DENX Software Engineering <gj@denx.de> 15 * 16 * BBB support based on /sys/dev/usb/umass.c from 17 * FreeBSD. 18 * 19 * See file CREDITS for list of people who contributed to this 20 * project. 21 * 22 * This program is free software; you can redistribute it and/or 23 * modify it under the terms of the GNU General Public License as 24 * published by the Free Software Foundation; either version 2 of 25 * the License, or (at your option) any later version. 26 * 27 * This program is distributed in the hope that it will be useful, 28 * but WITHOUT ANY WARRANTY; without even the implied warranty of 29 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 30 * GNU General Public License for more details. 31 * 32 * You should have received a copy of the GNU General Public License 33 * along with this program; if not, write to the Free Software 34 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 35 * MA 02111-1307 USA 36 * 37 */ 38 39 /* Note: 40 * Currently only the CBI transport protocoll has been implemented, and it 41 * is only tested with a TEAC USB Floppy. Other Massstorages with CBI or CB 42 * transport protocoll may work as well. 43 */ 44 /* 45 * New Note: 46 * Support for USB Mass Storage Devices (BBB) has been added. It has 47 * only been tested with USB memory sticks. 48 * Nota bene: if you are using the BBB support with a little-endian 49 * CPU then you MUST define LITTLEENDIAN in the configuration file! 50 */ 51 52 53 #include <common.h> 54 #include <command.h> 55 #include <asm/byteorder.h> 56 #include <asm/processor.h> 57 58 #include <part.h> 59 #include <usb.h> 60 61 #undef USB_STOR_DEBUG 62 #undef BBB_COMDAT_TRACE 63 #undef BBB_XPORT_TRACE 64 65 #ifdef USB_STOR_DEBUG 66 #define USB_STOR_PRINTF(fmt,args...) printf (fmt ,##args) 67 #else 68 #define USB_STOR_PRINTF(fmt,args...) 69 #endif 70 71 #include <scsi.h> 72 /* direction table -- this indicates the direction of the data 73 * transfer for each command code -- a 1 indicates input 74 */ 75 unsigned char us_direction[256/8] = { 76 0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77, 77 0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 78 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, 79 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 80 }; 81 #define US_DIRECTION(x) ((us_direction[x>>3] >> (x & 7)) & 1) 82 83 static unsigned char usb_stor_buf[512]; 84 static ccb usb_ccb; 85 86 /* 87 * CBI style 88 */ 89 90 #define US_CBI_ADSC 0 91 92 /* 93 * BULK only 94 */ 95 #define US_BBB_RESET 0xff 96 #define US_BBB_GET_MAX_LUN 0xfe 97 98 /* Command Block Wrapper */ 99 typedef struct { 100 __u32 dCBWSignature; 101 # define CBWSIGNATURE 0x43425355 102 __u32 dCBWTag; 103 __u32 dCBWDataTransferLength; 104 __u8 bCBWFlags; 105 # define CBWFLAGS_OUT 0x00 106 # define CBWFLAGS_IN 0x80 107 __u8 bCBWLUN; 108 __u8 bCDBLength; 109 # define CBWCDBLENGTH 16 110 __u8 CBWCDB[CBWCDBLENGTH]; 111 } umass_bbb_cbw_t; 112 #define UMASS_BBB_CBW_SIZE 31 113 static __u32 CBWTag = 0; 114 115 /* Command Status Wrapper */ 116 typedef struct { 117 __u32 dCSWSignature; 118 # define CSWSIGNATURE 0x53425355 119 __u32 dCSWTag; 120 __u32 dCSWDataResidue; 121 __u8 bCSWStatus; 122 # define CSWSTATUS_GOOD 0x0 123 # define CSWSTATUS_FAILED 0x1 124 # define CSWSTATUS_PHASE 0x2 125 } umass_bbb_csw_t; 126 #define UMASS_BBB_CSW_SIZE 13 127 128 #define USB_MAX_STOR_DEV 5 129 static int usb_max_devs = 0; /* number of highest available usb device */ 130 131 static block_dev_desc_t usb_dev_desc[USB_MAX_STOR_DEV]; 132 133 struct us_data; 134 typedef int (*trans_cmnd)(ccb*, struct us_data*); 135 typedef int (*trans_reset)(struct us_data*); 136 137 struct us_data { 138 struct usb_device *pusb_dev; /* this usb_device */ 139 unsigned int flags; /* from filter initially */ 140 unsigned char ifnum; /* interface number */ 141 unsigned char ep_in; /* in endpoint */ 142 unsigned char ep_out; /* out ....... */ 143 unsigned char ep_int; /* interrupt . */ 144 unsigned char subclass; /* as in overview */ 145 unsigned char protocol; /* .............. */ 146 unsigned char attention_done; /* force attn on first cmd */ 147 unsigned short ip_data; /* interrupt data */ 148 int action; /* what to do */ 149 int ip_wanted; /* needed */ 150 int *irq_handle; /* for USB int requests */ 151 unsigned int irqpipe; /* pipe for release_irq */ 152 unsigned char irqmaxp; /* max packed for irq Pipe */ 153 unsigned char irqinterval; /* Intervall for IRQ Pipe */ 154 ccb *srb; /* current srb */ 155 trans_reset transport_reset; /* reset routine */ 156 trans_cmnd transport; /* transport routine */ 157 }; 158 159 static struct us_data usb_stor[USB_MAX_STOR_DEV]; 160 161 162 #define USB_STOR_TRANSPORT_GOOD 0 163 #define USB_STOR_TRANSPORT_FAILED -1 164 #define USB_STOR_TRANSPORT_ERROR -2 165 166 167 int usb_stor_get_info(struct usb_device *dev, struct us_data *us, block_dev_desc_t *dev_desc); 168 int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,struct us_data *ss); 169 unsigned long usb_stor_read(int device, unsigned long blknr, unsigned long blkcnt, void *buffer); 170 struct usb_device * usb_get_dev_index(int index); 171 void uhci_show_temp_int_td(void); 172 173 block_dev_desc_t *usb_stor_get_dev(int index) 174 { 175 return (index < USB_MAX_STOR_DEV) ? &usb_dev_desc[index] : NULL; 176 } 177 178 179 void usb_show_progress(void) 180 { 181 printf("."); 182 } 183 184 /********************************************************************************* 185 * show info on storage devices; 'usb start/init' must be invoked earlier 186 * as we only retrieve structures populated during devices initialization 187 */ 188 int usb_stor_info(void) 189 { 190 int i; 191 192 if (usb_max_devs > 0) { 193 for (i = 0; i < usb_max_devs; i++) { 194 printf (" Device %d: ", i); 195 dev_print(&usb_dev_desc[i]); 196 } 197 return 0; 198 } 199 200 printf("No storage devices, perhaps not 'usb start'ed..?\n"); 201 return 1; 202 } 203 204 /********************************************************************************* 205 * scan the usb and reports device info 206 * to the user if mode = 1 207 * returns current device or -1 if no 208 */ 209 int usb_stor_scan(int mode) 210 { 211 unsigned char i; 212 struct usb_device *dev; 213 214 /* GJ */ 215 memset(usb_stor_buf, 0, sizeof(usb_stor_buf)); 216 217 if(mode==1) { 218 printf(" scanning bus for storage devices... "); 219 } 220 usb_disable_asynch(1); /* asynch transfer not allowed */ 221 222 for(i=0;i<USB_MAX_STOR_DEV;i++) { 223 memset(&usb_dev_desc[i],0,sizeof(block_dev_desc_t)); 224 usb_dev_desc[i].target=0xff; 225 usb_dev_desc[i].if_type=IF_TYPE_USB; 226 usb_dev_desc[i].dev=i; 227 usb_dev_desc[i].part_type=PART_TYPE_UNKNOWN; 228 usb_dev_desc[i].block_read=usb_stor_read; 229 } 230 231 usb_max_devs=0; 232 for(i=0;i<USB_MAX_DEVICE;i++) { 233 dev=usb_get_dev_index(i); /* get device */ 234 USB_STOR_PRINTF("i=%d\n",i); 235 if(dev==NULL) { 236 break; /* no more devices avaiable */ 237 } 238 if(usb_storage_probe(dev,0,&usb_stor[usb_max_devs])) { /* ok, it is a storage devices */ 239 /* get info and fill it in */ 240 if(usb_stor_get_info(dev, &usb_stor[usb_max_devs], &usb_dev_desc[usb_max_devs])) 241 usb_max_devs++; 242 } /* if storage device */ 243 if(usb_max_devs==USB_MAX_STOR_DEV) { 244 printf("max USB Storage Device reached: %d stopping\n",usb_max_devs); 245 break; 246 } 247 } /* for */ 248 249 usb_disable_asynch(0); /* asynch transfer allowed */ 250 printf("%d Storage Device(s) found\n", usb_max_devs); 251 if(usb_max_devs>0) 252 return 0; 253 else 254 return-1; 255 } 256 257 static int usb_stor_irq(struct usb_device *dev) 258 { 259 struct us_data *us; 260 us=(struct us_data *)dev->privptr; 261 262 if(us->ip_wanted) { 263 us->ip_wanted=0; 264 } 265 return 0; 266 } 267 268 269 #ifdef USB_STOR_DEBUG 270 271 static void usb_show_srb(ccb * pccb) 272 { 273 int i; 274 printf("SRB: len %d datalen 0x%lX\n ",pccb->cmdlen,pccb->datalen); 275 for(i=0;i<12;i++) { 276 printf("%02X ",pccb->cmd[i]); 277 } 278 printf("\n"); 279 } 280 281 static void display_int_status(unsigned long tmp) 282 { 283 printf("Status: %s %s %s %s %s %s %s\n", 284 (tmp & USB_ST_ACTIVE) ? "Active" : "", 285 (tmp & USB_ST_STALLED) ? "Stalled" : "", 286 (tmp & USB_ST_BUF_ERR) ? "Buffer Error" : "", 287 (tmp & USB_ST_BABBLE_DET) ? "Babble Det" : "", 288 (tmp & USB_ST_NAK_REC) ? "NAKed" : "", 289 (tmp & USB_ST_CRC_ERR) ? "CRC Error" : "", 290 (tmp & USB_ST_BIT_ERR) ? "Bitstuff Error" : ""); 291 } 292 #endif 293 /*********************************************************************** 294 * Data transfer routines 295 ***********************************************************************/ 296 297 static int us_one_transfer(struct us_data *us, int pipe, char *buf, int length) 298 { 299 int max_size; 300 int this_xfer; 301 int result; 302 int partial; 303 int maxtry; 304 int stat; 305 306 /* determine the maximum packet size for these transfers */ 307 max_size = usb_maxpacket(us->pusb_dev, pipe) * 16; 308 309 /* while we have data left to transfer */ 310 while (length) { 311 312 /* calculate how long this will be -- maximum or a remainder */ 313 this_xfer = length > max_size ? max_size : length; 314 length -= this_xfer; 315 316 /* setup the retry counter */ 317 maxtry = 10; 318 319 /* set up the transfer loop */ 320 do { 321 /* transfer the data */ 322 USB_STOR_PRINTF("Bulk xfer 0x%x(%d) try #%d\n", 323 (unsigned int)buf, this_xfer, 11 - maxtry); 324 result = usb_bulk_msg(us->pusb_dev, pipe, buf, 325 this_xfer, &partial, USB_CNTL_TIMEOUT*5); 326 USB_STOR_PRINTF("bulk_msg returned %d xferred %d/%d\n", 327 result, partial, this_xfer); 328 if(us->pusb_dev->status!=0) { 329 /* if we stall, we need to clear it before we go on */ 330 #ifdef USB_STOR_DEBUG 331 display_int_status(us->pusb_dev->status); 332 #endif 333 if (us->pusb_dev->status & USB_ST_STALLED) { 334 USB_STOR_PRINTF("stalled ->clearing endpoint halt for pipe 0x%x\n", pipe); 335 stat = us->pusb_dev->status; 336 usb_clear_halt(us->pusb_dev, pipe); 337 us->pusb_dev->status=stat; 338 if(this_xfer == partial) { 339 USB_STOR_PRINTF("bulk transferred with error %X, but data ok\n",us->pusb_dev->status); 340 return 0; 341 } 342 else 343 return result; 344 } 345 if (us->pusb_dev->status & USB_ST_NAK_REC) { 346 USB_STOR_PRINTF("Device NAKed bulk_msg\n"); 347 return result; 348 } 349 if(this_xfer == partial) { 350 USB_STOR_PRINTF("bulk transferred with error %d, but data ok\n",us->pusb_dev->status); 351 return 0; 352 } 353 /* if our try counter reaches 0, bail out */ 354 USB_STOR_PRINTF("bulk transferred with error %d, data %d\n",us->pusb_dev->status,partial); 355 if (!maxtry--) 356 return result; 357 } 358 /* update to show what data was transferred */ 359 this_xfer -= partial; 360 buf += partial; 361 /* continue until this transfer is done */ 362 } while ( this_xfer ); 363 } 364 365 /* if we get here, we're done and successful */ 366 return 0; 367 } 368 369 static int usb_stor_BBB_reset(struct us_data *us) 370 { 371 int result; 372 unsigned int pipe; 373 374 /* 375 * Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class) 376 * 377 * For Reset Recovery the host shall issue in the following order: 378 * a) a Bulk-Only Mass Storage Reset 379 * b) a Clear Feature HALT to the Bulk-In endpoint 380 * c) a Clear Feature HALT to the Bulk-Out endpoint 381 * 382 * This is done in 3 steps. 383 * 384 * If the reset doesn't succeed, the device should be port reset. 385 * 386 * This comment stolen from FreeBSD's /sys/dev/usb/umass.c. 387 */ 388 USB_STOR_PRINTF("BBB_reset\n"); 389 result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev,0), 390 US_BBB_RESET, USB_TYPE_CLASS | USB_RECIP_INTERFACE, 391 0, us->ifnum, 0, 0, USB_CNTL_TIMEOUT*5); 392 393 if((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) 394 { 395 USB_STOR_PRINTF("RESET:stall\n"); 396 return -1; 397 } 398 399 /* long wait for reset */ 400 wait_ms(150); 401 USB_STOR_PRINTF("BBB_reset result %d: status %X reset\n",result,us->pusb_dev->status); 402 pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in); 403 result = usb_clear_halt(us->pusb_dev, pipe); 404 /* long wait for reset */ 405 wait_ms(150); 406 USB_STOR_PRINTF("BBB_reset result %d: status %X clearing IN endpoint\n",result,us->pusb_dev->status); 407 /* long wait for reset */ 408 pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out); 409 result = usb_clear_halt(us->pusb_dev, pipe); 410 wait_ms(150); 411 USB_STOR_PRINTF("BBB_reset result %d: status %X clearing OUT endpoint\n",result,us->pusb_dev->status); 412 USB_STOR_PRINTF("BBB_reset done\n"); 413 return 0; 414 } 415 416 /* FIXME: this reset function doesn't really reset the port, and it 417 * should. Actually it should probably do what it's doing here, and 418 * reset the port physically 419 */ 420 static int usb_stor_CB_reset(struct us_data *us) 421 { 422 unsigned char cmd[12]; 423 int result; 424 425 USB_STOR_PRINTF("CB_reset\n"); 426 memset(cmd, 0xFF, sizeof(cmd)); 427 cmd[0] = SCSI_SEND_DIAG; 428 cmd[1] = 4; 429 result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev,0), 430 US_CBI_ADSC, USB_TYPE_CLASS | USB_RECIP_INTERFACE, 431 0, us->ifnum, cmd, sizeof(cmd), USB_CNTL_TIMEOUT*5); 432 433 /* long wait for reset */ 434 wait_ms(1500); 435 USB_STOR_PRINTF("CB_reset result %d: status %X clearing endpoint halt\n",result,us->pusb_dev->status); 436 usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_in)); 437 usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_out)); 438 439 USB_STOR_PRINTF("CB_reset done\n"); 440 return 0; 441 } 442 443 /* 444 * Set up the command for a BBB device. Note that the actual SCSI 445 * command is copied into cbw.CBWCDB. 446 */ 447 int usb_stor_BBB_comdat(ccb *srb, struct us_data *us) 448 { 449 int result; 450 int actlen; 451 int dir_in; 452 unsigned int pipe; 453 umass_bbb_cbw_t cbw; 454 455 dir_in = US_DIRECTION(srb->cmd[0]); 456 457 #ifdef BBB_COMDAT_TRACE 458 printf("dir %d lun %d cmdlen %d cmd %p datalen %d pdata %p\n", dir_in, srb->lun, srb->cmdlen, srb->cmd, srb->datalen, srb->pdata); 459 if (srb->cmdlen) { 460 for(result = 0;result < srb->cmdlen;result++) 461 printf("cmd[%d] %#x ", result, srb->cmd[result]); 462 printf("\n"); 463 } 464 #endif 465 /* sanity checks */ 466 if (!(srb->cmdlen <= CBWCDBLENGTH)) { 467 USB_STOR_PRINTF("usb_stor_BBB_comdat:cmdlen too large\n"); 468 return -1; 469 } 470 471 /* always OUT to the ep */ 472 pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out); 473 474 cbw.dCBWSignature = cpu_to_le32(CBWSIGNATURE); 475 cbw.dCBWTag = cpu_to_le32(CBWTag++); 476 cbw.dCBWDataTransferLength = cpu_to_le32(srb->datalen); 477 cbw.bCBWFlags = (dir_in? CBWFLAGS_IN : CBWFLAGS_OUT); 478 cbw.bCBWLUN = srb->lun; 479 cbw.bCDBLength = srb->cmdlen; 480 /* copy the command data into the CBW command data buffer */ 481 /* DST SRC LEN!!! */ 482 memcpy(cbw.CBWCDB, srb->cmd, srb->cmdlen); 483 result = usb_bulk_msg(us->pusb_dev, pipe, &cbw, UMASS_BBB_CBW_SIZE, &actlen, USB_CNTL_TIMEOUT*5); 484 if (result < 0) 485 USB_STOR_PRINTF("usb_stor_BBB_comdat:usb_bulk_msg error\n"); 486 return result; 487 } 488 489 /* FIXME: we also need a CBI_command which sets up the completion 490 * interrupt, and waits for it 491 */ 492 int usb_stor_CB_comdat(ccb *srb, struct us_data *us) 493 { 494 int result = 0; 495 int dir_in,retry; 496 unsigned int pipe; 497 unsigned long status; 498 499 retry=5; 500 dir_in=US_DIRECTION(srb->cmd[0]); 501 502 if(dir_in) 503 pipe=usb_rcvbulkpipe(us->pusb_dev, us->ep_in); 504 else 505 pipe=usb_sndbulkpipe(us->pusb_dev, us->ep_out); 506 while(retry--) { 507 USB_STOR_PRINTF("CBI gets a command: Try %d\n",5-retry); 508 #ifdef USB_STOR_DEBUG 509 usb_show_srb(srb); 510 #endif 511 /* let's send the command via the control pipe */ 512 result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev,0), 513 US_CBI_ADSC, USB_TYPE_CLASS | USB_RECIP_INTERFACE, 514 0, us->ifnum, 515 srb->cmd, srb->cmdlen, USB_CNTL_TIMEOUT*5); 516 USB_STOR_PRINTF("CB_transport: control msg returned %d, status %X\n",result,us->pusb_dev->status); 517 /* check the return code for the command */ 518 if (result < 0) { 519 if(us->pusb_dev->status & USB_ST_STALLED) { 520 status=us->pusb_dev->status; 521 USB_STOR_PRINTF(" stall during command found, clear pipe\n"); 522 usb_clear_halt(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev,0)); 523 us->pusb_dev->status=status; 524 } 525 USB_STOR_PRINTF(" error during command %02X Stat = %X\n",srb->cmd[0],us->pusb_dev->status); 526 return result; 527 } 528 /* transfer the data payload for this command, if one exists*/ 529 530 USB_STOR_PRINTF("CB_transport: control msg returned %d, direction is %s to go 0x%lx\n",result,dir_in ? "IN" : "OUT",srb->datalen); 531 if (srb->datalen) { 532 result = us_one_transfer(us, pipe, (char *)srb->pdata,srb->datalen); 533 USB_STOR_PRINTF("CBI attempted to transfer data, result is %d status %lX, len %d\n", result,us->pusb_dev->status,us->pusb_dev->act_len); 534 if(!(us->pusb_dev->status & USB_ST_NAK_REC)) 535 break; 536 } /* if (srb->datalen) */ 537 else 538 break; 539 } 540 /* return result */ 541 542 return result; 543 } 544 545 546 int usb_stor_CBI_get_status (ccb * srb, struct us_data *us) 547 { 548 int timeout; 549 550 us->ip_wanted = 1; 551 submit_int_msg (us->pusb_dev, us->irqpipe, 552 (void *) &us->ip_data, us->irqmaxp, us->irqinterval); 553 timeout = 1000; 554 while (timeout--) { 555 if ((volatile int *) us->ip_wanted == 0) 556 break; 557 wait_ms (10); 558 } 559 if (us->ip_wanted) { 560 printf (" Did not get interrupt on CBI\n"); 561 us->ip_wanted = 0; 562 return USB_STOR_TRANSPORT_ERROR; 563 } 564 USB_STOR_PRINTF 565 ("Got interrupt data 0x%x, transfered %d status 0x%lX\n", 566 us->ip_data, us->pusb_dev->irq_act_len, 567 us->pusb_dev->irq_status); 568 /* UFI gives us ASC and ASCQ, like a request sense */ 569 if (us->subclass == US_SC_UFI) { 570 if (srb->cmd[0] == SCSI_REQ_SENSE || 571 srb->cmd[0] == SCSI_INQUIRY) 572 return USB_STOR_TRANSPORT_GOOD; /* Good */ 573 else if (us->ip_data) 574 return USB_STOR_TRANSPORT_FAILED; 575 else 576 return USB_STOR_TRANSPORT_GOOD; 577 } 578 /* otherwise, we interpret the data normally */ 579 switch (us->ip_data) { 580 case 0x0001: 581 return USB_STOR_TRANSPORT_GOOD; 582 case 0x0002: 583 return USB_STOR_TRANSPORT_FAILED; 584 default: 585 return USB_STOR_TRANSPORT_ERROR; 586 } /* switch */ 587 return USB_STOR_TRANSPORT_ERROR; 588 } 589 590 #define USB_TRANSPORT_UNKNOWN_RETRY 5 591 #define USB_TRANSPORT_NOT_READY_RETRY 10 592 593 /* clear a stall on an endpoint - special for BBB devices */ 594 int usb_stor_BBB_clear_endpt_stall(struct us_data *us, __u8 endpt) 595 { 596 int result; 597 598 /* ENDPOINT_HALT = 0, so set value to 0 */ 599 result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev,0), 600 USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, 601 0, endpt, 0, 0, USB_CNTL_TIMEOUT*5); 602 return result; 603 } 604 605 int usb_stor_BBB_transport(ccb *srb, struct us_data *us) 606 { 607 int result, retry; 608 int dir_in; 609 int actlen, data_actlen; 610 unsigned int pipe, pipein, pipeout; 611 umass_bbb_csw_t csw; 612 #ifdef BBB_XPORT_TRACE 613 unsigned char *ptr; 614 int index; 615 #endif 616 617 dir_in = US_DIRECTION(srb->cmd[0]); 618 619 /* COMMAND phase */ 620 USB_STOR_PRINTF("COMMAND phase\n"); 621 result = usb_stor_BBB_comdat(srb, us); 622 if (result < 0) { 623 USB_STOR_PRINTF("failed to send CBW status %ld\n", 624 us->pusb_dev->status); 625 usb_stor_BBB_reset(us); 626 return USB_STOR_TRANSPORT_FAILED; 627 } 628 wait_ms(5); 629 pipein = usb_rcvbulkpipe(us->pusb_dev, us->ep_in); 630 pipeout = usb_sndbulkpipe(us->pusb_dev, us->ep_out); 631 /* DATA phase + error handling */ 632 data_actlen = 0; 633 /* no data, go immediately to the STATUS phase */ 634 if (srb->datalen == 0) 635 goto st; 636 USB_STOR_PRINTF("DATA phase\n"); 637 if (dir_in) 638 pipe = pipein; 639 else 640 pipe = pipeout; 641 result = usb_bulk_msg(us->pusb_dev, pipe, srb->pdata, srb->datalen, &data_actlen, USB_CNTL_TIMEOUT*5); 642 /* special handling of STALL in DATA phase */ 643 if((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) { 644 USB_STOR_PRINTF("DATA:stall\n"); 645 /* clear the STALL on the endpoint */ 646 result = usb_stor_BBB_clear_endpt_stall(us, dir_in? us->ep_in : us->ep_out); 647 if (result >= 0) 648 /* continue on to STATUS phase */ 649 goto st; 650 } 651 if (result < 0) { 652 USB_STOR_PRINTF("usb_bulk_msg error status %ld\n", 653 us->pusb_dev->status); 654 usb_stor_BBB_reset(us); 655 return USB_STOR_TRANSPORT_FAILED; 656 } 657 #ifdef BBB_XPORT_TRACE 658 for (index = 0; index < data_actlen; index++) 659 printf("pdata[%d] %#x ", index, srb->pdata[index]); 660 printf("\n"); 661 #endif 662 /* STATUS phase + error handling */ 663 st: 664 retry = 0; 665 again: 666 USB_STOR_PRINTF("STATUS phase\n"); 667 result = usb_bulk_msg(us->pusb_dev, pipein, &csw, UMASS_BBB_CSW_SIZE, 668 &actlen, USB_CNTL_TIMEOUT*5); 669 670 /* special handling of STALL in STATUS phase */ 671 if((result < 0) && (retry < 1) && (us->pusb_dev->status & USB_ST_STALLED)) { 672 USB_STOR_PRINTF("STATUS:stall\n"); 673 /* clear the STALL on the endpoint */ 674 result = usb_stor_BBB_clear_endpt_stall(us, us->ep_in); 675 if (result >= 0 && (retry++ < 1)) 676 /* do a retry */ 677 goto again; 678 } 679 if (result < 0) { 680 USB_STOR_PRINTF("usb_bulk_msg error status %ld\n", 681 us->pusb_dev->status); 682 usb_stor_BBB_reset(us); 683 return USB_STOR_TRANSPORT_FAILED; 684 } 685 #ifdef BBB_XPORT_TRACE 686 ptr = (unsigned char *)&csw; 687 for (index = 0; index < UMASS_BBB_CSW_SIZE; index++) 688 printf("ptr[%d] %#x ", index, ptr[index]); 689 printf("\n"); 690 #endif 691 /* misuse pipe to get the residue */ 692 pipe = le32_to_cpu(csw.dCSWDataResidue); 693 if (pipe == 0 && srb->datalen != 0 && srb->datalen - data_actlen != 0) 694 pipe = srb->datalen - data_actlen; 695 if (CSWSIGNATURE != le32_to_cpu(csw.dCSWSignature)) { 696 USB_STOR_PRINTF("!CSWSIGNATURE\n"); 697 usb_stor_BBB_reset(us); 698 return USB_STOR_TRANSPORT_FAILED; 699 } else if ((CBWTag - 1) != le32_to_cpu(csw.dCSWTag)) { 700 USB_STOR_PRINTF("!Tag\n"); 701 usb_stor_BBB_reset(us); 702 return USB_STOR_TRANSPORT_FAILED; 703 } else if (csw.bCSWStatus > CSWSTATUS_PHASE) { 704 USB_STOR_PRINTF(">PHASE\n"); 705 usb_stor_BBB_reset(us); 706 return USB_STOR_TRANSPORT_FAILED; 707 } else if (csw.bCSWStatus == CSWSTATUS_PHASE) { 708 USB_STOR_PRINTF("=PHASE\n"); 709 usb_stor_BBB_reset(us); 710 return USB_STOR_TRANSPORT_FAILED; 711 } else if (data_actlen > srb->datalen) { 712 USB_STOR_PRINTF("transferred %dB instead of %dB\n", 713 data_actlen, srb->datalen); 714 return USB_STOR_TRANSPORT_FAILED; 715 } else if (csw.bCSWStatus == CSWSTATUS_FAILED) { 716 USB_STOR_PRINTF("FAILED\n"); 717 return USB_STOR_TRANSPORT_FAILED; 718 } 719 720 return result; 721 } 722 723 int usb_stor_CB_transport(ccb *srb, struct us_data *us) 724 { 725 int result,status; 726 ccb *psrb; 727 ccb reqsrb; 728 int retry,notready; 729 730 psrb = &reqsrb; 731 status=USB_STOR_TRANSPORT_GOOD; 732 retry=0; 733 notready=0; 734 /* issue the command */ 735 do_retry: 736 result=usb_stor_CB_comdat(srb,us); 737 USB_STOR_PRINTF("command / Data returned %d, status %X\n",result,us->pusb_dev->status); 738 /* if this is an CBI Protocol, get IRQ */ 739 if(us->protocol==US_PR_CBI) { 740 status=usb_stor_CBI_get_status(srb,us); 741 /* if the status is error, report it */ 742 if(status==USB_STOR_TRANSPORT_ERROR) { 743 USB_STOR_PRINTF(" USB CBI Command Error\n"); 744 return status; 745 } 746 srb->sense_buf[12]=(unsigned char)(us->ip_data>>8); 747 srb->sense_buf[13]=(unsigned char)(us->ip_data&0xff); 748 if(!us->ip_data) { 749 /* if the status is good, report it */ 750 if(status==USB_STOR_TRANSPORT_GOOD) { 751 USB_STOR_PRINTF(" USB CBI Command Good\n"); 752 return status; 753 } 754 } 755 } 756 /* do we have to issue an auto request? */ 757 /* HERE we have to check the result */ 758 if((result<0) && !(us->pusb_dev->status & USB_ST_STALLED)) { 759 USB_STOR_PRINTF("ERROR %X\n",us->pusb_dev->status); 760 us->transport_reset(us); 761 return USB_STOR_TRANSPORT_ERROR; 762 } 763 if((us->protocol==US_PR_CBI) && 764 ((srb->cmd[0]==SCSI_REQ_SENSE) || 765 (srb->cmd[0]==SCSI_INQUIRY))) { /* do not issue an autorequest after request sense */ 766 USB_STOR_PRINTF("No auto request and good\n"); 767 return USB_STOR_TRANSPORT_GOOD; 768 } 769 /* issue an request_sense */ 770 memset(&psrb->cmd[0],0,12); 771 psrb->cmd[0]=SCSI_REQ_SENSE; 772 psrb->cmd[1]=srb->lun<<5; 773 psrb->cmd[4]=18; 774 psrb->datalen=18; 775 psrb->pdata = &srb->sense_buf[0]; 776 psrb->cmdlen=12; 777 /* issue the command */ 778 result=usb_stor_CB_comdat(psrb,us); 779 USB_STOR_PRINTF("auto request returned %d\n",result); 780 /* if this is an CBI Protocol, get IRQ */ 781 if(us->protocol==US_PR_CBI) { 782 status=usb_stor_CBI_get_status(psrb,us); 783 } 784 if((result<0)&&!(us->pusb_dev->status & USB_ST_STALLED)) { 785 USB_STOR_PRINTF(" AUTO REQUEST ERROR %d\n",us->pusb_dev->status); 786 return USB_STOR_TRANSPORT_ERROR; 787 } 788 USB_STOR_PRINTF("autorequest returned 0x%02X 0x%02X 0x%02X 0x%02X\n",srb->sense_buf[0],srb->sense_buf[2],srb->sense_buf[12],srb->sense_buf[13]); 789 /* Check the auto request result */ 790 if((srb->sense_buf[2]==0) && 791 (srb->sense_buf[12]==0) && 792 (srb->sense_buf[13]==0)) /* ok, no sense */ 793 return USB_STOR_TRANSPORT_GOOD; 794 /* Check the auto request result */ 795 switch(srb->sense_buf[2]) { 796 case 0x01: /* Recovered Error */ 797 return USB_STOR_TRANSPORT_GOOD; 798 break; 799 case 0x02: /* Not Ready */ 800 if(notready++ > USB_TRANSPORT_NOT_READY_RETRY) { 801 printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X 0x%02X (NOT READY)\n", 802 srb->cmd[0],srb->sense_buf[0],srb->sense_buf[2],srb->sense_buf[12],srb->sense_buf[13]); 803 return USB_STOR_TRANSPORT_FAILED; 804 } else { 805 wait_ms(100); 806 goto do_retry; 807 } 808 break; 809 default: 810 if(retry++ > USB_TRANSPORT_UNKNOWN_RETRY) { 811 printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X 0x%02X\n", 812 srb->cmd[0],srb->sense_buf[0],srb->sense_buf[2],srb->sense_buf[12],srb->sense_buf[13]); 813 return USB_STOR_TRANSPORT_FAILED; 814 } else { 815 goto do_retry; 816 } 817 break; 818 } 819 return USB_STOR_TRANSPORT_FAILED; 820 } 821 822 823 static int usb_inquiry(ccb *srb,struct us_data *ss) 824 { 825 int retry,i; 826 retry=5; 827 do { 828 memset(&srb->cmd[0],0,12); 829 srb->cmd[0]=SCSI_INQUIRY; 830 srb->cmd[1]=srb->lun<<5; 831 srb->cmd[4]=36; 832 srb->datalen=36; 833 srb->cmdlen=12; 834 i=ss->transport(srb,ss); 835 USB_STOR_PRINTF("inquiry returns %d\n",i); 836 if(i==0) 837 break; 838 } while(retry--); 839 840 if(!retry) { 841 printf("error in inquiry\n"); 842 return -1; 843 } 844 return 0; 845 } 846 847 static int usb_request_sense(ccb *srb,struct us_data *ss) 848 { 849 char *ptr; 850 851 ptr=(char *)srb->pdata; 852 memset(&srb->cmd[0],0,12); 853 srb->cmd[0]=SCSI_REQ_SENSE; 854 srb->cmd[1]=srb->lun<<5; 855 srb->cmd[4]=18; 856 srb->datalen=18; 857 srb->pdata = &srb->sense_buf[0]; 858 srb->cmdlen=12; 859 ss->transport(srb,ss); 860 USB_STOR_PRINTF("Request Sense returned %02X %02X %02X\n",srb->sense_buf[2],srb->sense_buf[12],srb->sense_buf[13]); 861 srb->pdata=(uchar *)ptr; 862 return 0; 863 } 864 865 static int usb_test_unit_ready(ccb *srb,struct us_data *ss) 866 { 867 int retries = 10; 868 869 do { 870 memset(&srb->cmd[0],0,12); 871 srb->cmd[0]=SCSI_TST_U_RDY; 872 srb->cmd[1]=srb->lun<<5; 873 srb->datalen=0; 874 srb->cmdlen=12; 875 if(ss->transport(srb,ss)==USB_STOR_TRANSPORT_GOOD) { 876 return 0; 877 } 878 usb_request_sense (srb, ss); 879 wait_ms (100); 880 } while(retries--); 881 882 return -1; 883 } 884 885 static int usb_read_capacity(ccb *srb,struct us_data *ss) 886 { 887 int retry; 888 retry = 3; /* retries */ 889 do { 890 memset(&srb->cmd[0],0,12); 891 srb->cmd[0]=SCSI_RD_CAPAC; 892 srb->cmd[1]=srb->lun<<5; 893 srb->datalen=8; 894 srb->cmdlen=12; 895 if(ss->transport(srb,ss)==USB_STOR_TRANSPORT_GOOD) { 896 return 0; 897 } 898 } while(retry--); 899 900 return -1; 901 } 902 903 static int usb_read_10(ccb *srb,struct us_data *ss, unsigned long start, unsigned short blocks) 904 { 905 memset(&srb->cmd[0],0,12); 906 srb->cmd[0]=SCSI_READ10; 907 srb->cmd[1]=srb->lun<<5; 908 srb->cmd[2]=((unsigned char) (start>>24))&0xff; 909 srb->cmd[3]=((unsigned char) (start>>16))&0xff; 910 srb->cmd[4]=((unsigned char) (start>>8))&0xff; 911 srb->cmd[5]=((unsigned char) (start))&0xff; 912 srb->cmd[7]=((unsigned char) (blocks>>8))&0xff; 913 srb->cmd[8]=(unsigned char) blocks & 0xff; 914 srb->cmdlen=12; 915 USB_STOR_PRINTF("read10: start %lx blocks %x\n",start,blocks); 916 return ss->transport(srb,ss); 917 } 918 919 920 #ifdef CONFIG_USB_BIN_FIXUP 921 /* 922 * Some USB storage devices queried for SCSI identification data respond with 923 * binary strings, which if output to the console freeze the terminal. The 924 * workaround is to modify the vendor and product strings read from such 925 * device with proper values (as reported by 'usb info'). 926 * 927 * Vendor and product length limits are taken from the definition of 928 * block_dev_desc_t in include/part.h. 929 */ 930 static void usb_bin_fixup(struct usb_device_descriptor descriptor, 931 unsigned char vendor[], 932 unsigned char product[]) { 933 const unsigned char max_vendor_len = 40; 934 const unsigned char max_product_len = 20; 935 if (descriptor.idVendor == 0x0424 && descriptor.idProduct == 0x223a) { 936 strncpy ((char *)vendor, "SMSC", max_vendor_len); 937 strncpy ((char *)product, "Flash Media Cntrller", max_product_len); 938 } 939 } 940 #endif /* CONFIG_USB_BIN_FIXUP */ 941 942 #define USB_MAX_READ_BLK 20 943 944 unsigned long usb_stor_read(int device, unsigned long blknr, unsigned long blkcnt, void *buffer) 945 { 946 unsigned long start,blks, buf_addr; 947 unsigned short smallblks; 948 struct usb_device *dev; 949 int retry,i; 950 ccb *srb = &usb_ccb; 951 952 if (blkcnt == 0) 953 return 0; 954 955 device &= 0xff; 956 /* Setup device 957 */ 958 USB_STOR_PRINTF("\nusb_read: dev %d \n",device); 959 dev=NULL; 960 for(i=0;i<USB_MAX_DEVICE;i++) { 961 dev=usb_get_dev_index(i); 962 if(dev==NULL) { 963 return 0; 964 } 965 if(dev->devnum==usb_dev_desc[device].target) 966 break; 967 } 968 969 usb_disable_asynch(1); /* asynch transfer not allowed */ 970 srb->lun=usb_dev_desc[device].lun; 971 buf_addr=(unsigned long)buffer; 972 start=blknr; 973 blks=blkcnt; 974 if(usb_test_unit_ready(srb,(struct us_data *)dev->privptr)) { 975 printf("Device NOT ready\n Request Sense returned %02X %02X %02X\n", 976 srb->sense_buf[2],srb->sense_buf[12],srb->sense_buf[13]); 977 return 0; 978 } 979 USB_STOR_PRINTF("\nusb_read: dev %d startblk %lx, blccnt %lx buffer %lx\n",device,start,blks, buf_addr); 980 do { 981 retry=2; 982 srb->pdata=(unsigned char *)buf_addr; 983 if(blks>USB_MAX_READ_BLK) { 984 smallblks=USB_MAX_READ_BLK; 985 } else { 986 smallblks=(unsigned short) blks; 987 } 988 retry_it: 989 if(smallblks==USB_MAX_READ_BLK) 990 usb_show_progress(); 991 srb->datalen=usb_dev_desc[device].blksz * smallblks; 992 srb->pdata=(unsigned char *)buf_addr; 993 if(usb_read_10(srb,(struct us_data *)dev->privptr, start, smallblks)) { 994 USB_STOR_PRINTF("Read ERROR\n"); 995 usb_request_sense(srb,(struct us_data *)dev->privptr); 996 if(retry--) 997 goto retry_it; 998 blkcnt-=blks; 999 break; 1000 } 1001 start+=smallblks; 1002 blks-=smallblks; 1003 buf_addr+=srb->datalen; 1004 } while(blks!=0); 1005 USB_STOR_PRINTF("usb_read: end startblk %lx, blccnt %x buffer %lx\n",start,smallblks,buf_addr); 1006 usb_disable_asynch(0); /* asynch transfer allowed */ 1007 if(blkcnt>=USB_MAX_READ_BLK) 1008 printf("\n"); 1009 return(blkcnt); 1010 } 1011 1012 1013 /* Probe to see if a new device is actually a Storage device */ 1014 int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,struct us_data *ss) 1015 { 1016 struct usb_interface_descriptor *iface; 1017 int i; 1018 unsigned int flags = 0; 1019 1020 int protocol = 0; 1021 int subclass = 0; 1022 1023 /* let's examine the device now */ 1024 iface = &dev->config.if_desc[ifnum]; 1025 1026 #if 0 1027 /* this is the place to patch some storage devices */ 1028 USB_STOR_PRINTF("iVendor %X iProduct %X\n",dev->descriptor.idVendor,dev->descriptor.idProduct); 1029 if ((dev->descriptor.idVendor) == 0x066b && (dev->descriptor.idProduct) == 0x0103) { 1030 USB_STOR_PRINTF("patched for E-USB\n"); 1031 protocol = US_PR_CB; 1032 subclass = US_SC_UFI; /* an assumption */ 1033 } 1034 #endif 1035 1036 if (dev->descriptor.bDeviceClass != 0 || 1037 iface->bInterfaceClass != USB_CLASS_MASS_STORAGE || 1038 iface->bInterfaceSubClass < US_SC_MIN || 1039 iface->bInterfaceSubClass > US_SC_MAX) { 1040 /* if it's not a mass storage, we go no further */ 1041 return 0; 1042 } 1043 1044 memset(ss, 0, sizeof(struct us_data)); 1045 1046 /* At this point, we know we've got a live one */ 1047 USB_STOR_PRINTF("\n\nUSB Mass Storage device detected\n"); 1048 1049 /* Initialize the us_data structure with some useful info */ 1050 ss->flags = flags; 1051 ss->ifnum = ifnum; 1052 ss->pusb_dev = dev; 1053 ss->attention_done = 0; 1054 1055 /* If the device has subclass and protocol, then use that. Otherwise, 1056 * take data from the specific interface. 1057 */ 1058 if (subclass) { 1059 ss->subclass = subclass; 1060 ss->protocol = protocol; 1061 } else { 1062 ss->subclass = iface->bInterfaceSubClass; 1063 ss->protocol = iface->bInterfaceProtocol; 1064 } 1065 1066 /* set the handler pointers based on the protocol */ 1067 USB_STOR_PRINTF("Transport: "); 1068 switch (ss->protocol) { 1069 case US_PR_CB: 1070 USB_STOR_PRINTF("Control/Bulk\n"); 1071 ss->transport = usb_stor_CB_transport; 1072 ss->transport_reset = usb_stor_CB_reset; 1073 break; 1074 1075 case US_PR_CBI: 1076 USB_STOR_PRINTF("Control/Bulk/Interrupt\n"); 1077 ss->transport = usb_stor_CB_transport; 1078 ss->transport_reset = usb_stor_CB_reset; 1079 break; 1080 case US_PR_BULK: 1081 USB_STOR_PRINTF("Bulk/Bulk/Bulk\n"); 1082 ss->transport = usb_stor_BBB_transport; 1083 ss->transport_reset = usb_stor_BBB_reset; 1084 break; 1085 default: 1086 printf("USB Storage Transport unknown / not yet implemented\n"); 1087 return 0; 1088 break; 1089 } 1090 1091 /* 1092 * We are expecting a minimum of 2 endpoints - in and out (bulk). 1093 * An optional interrupt is OK (necessary for CBI protocol). 1094 * We will ignore any others. 1095 */ 1096 for (i = 0; i < iface->bNumEndpoints; i++) { 1097 /* is it an BULK endpoint? */ 1098 if ((iface->ep_desc[i].bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) 1099 == USB_ENDPOINT_XFER_BULK) { 1100 if (iface->ep_desc[i].bEndpointAddress & USB_DIR_IN) 1101 ss->ep_in = iface->ep_desc[i].bEndpointAddress & 1102 USB_ENDPOINT_NUMBER_MASK; 1103 else 1104 ss->ep_out = iface->ep_desc[i].bEndpointAddress & 1105 USB_ENDPOINT_NUMBER_MASK; 1106 } 1107 1108 /* is it an interrupt endpoint? */ 1109 if ((iface->ep_desc[i].bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) 1110 == USB_ENDPOINT_XFER_INT) { 1111 ss->ep_int = iface->ep_desc[i].bEndpointAddress & 1112 USB_ENDPOINT_NUMBER_MASK; 1113 ss->irqinterval = iface->ep_desc[i].bInterval; 1114 } 1115 } 1116 USB_STOR_PRINTF("Endpoints In %d Out %d Int %d\n", 1117 ss->ep_in, ss->ep_out, ss->ep_int); 1118 1119 /* Do some basic sanity checks, and bail if we find a problem */ 1120 if (usb_set_interface(dev, iface->bInterfaceNumber, 0) || 1121 !ss->ep_in || !ss->ep_out || 1122 (ss->protocol == US_PR_CBI && ss->ep_int == 0)) { 1123 USB_STOR_PRINTF("Problems with device\n"); 1124 return 0; 1125 } 1126 /* set class specific stuff */ 1127 /* We only handle certain protocols. Currently, these are 1128 * the only ones. 1129 * The SFF8070 accepts the requests used in u-boot 1130 */ 1131 if (ss->subclass != US_SC_UFI && ss->subclass != US_SC_SCSI && 1132 ss->subclass != US_SC_8070) { 1133 printf("Sorry, protocol %d not yet supported.\n",ss->subclass); 1134 return 0; 1135 } 1136 if(ss->ep_int) { /* we had found an interrupt endpoint, prepare irq pipe */ 1137 /* set up the IRQ pipe and handler */ 1138 1139 ss->irqinterval = (ss->irqinterval > 0) ? ss->irqinterval : 255; 1140 ss->irqpipe = usb_rcvintpipe(ss->pusb_dev, ss->ep_int); 1141 ss->irqmaxp = usb_maxpacket(dev, ss->irqpipe); 1142 dev->irq_handle=usb_stor_irq; 1143 } 1144 dev->privptr=(void *)ss; 1145 return 1; 1146 } 1147 1148 int usb_stor_get_info(struct usb_device *dev,struct us_data *ss,block_dev_desc_t *dev_desc) 1149 { 1150 unsigned char perq,modi; 1151 unsigned long cap[2]; 1152 unsigned long *capacity,*blksz; 1153 ccb *pccb = &usb_ccb; 1154 1155 /* for some reasons a couple of devices would not survive this reset */ 1156 if ( 1157 /* Sony USM256E */ 1158 (dev->descriptor.idVendor == 0x054c && 1159 dev->descriptor.idProduct == 0x019e) 1160 1161 || 1162 /* USB007 Mini-USB2 Flash Drive */ 1163 (dev->descriptor.idVendor == 0x066f && 1164 dev->descriptor.idProduct == 0x2010) 1165 || 1166 /* SanDisk Corporation Cruzer Micro 20044318410546613953 */ 1167 (dev->descriptor.idVendor == 0x0781 && 1168 dev->descriptor.idProduct == 0x5151) 1169 ) 1170 USB_STOR_PRINTF("usb_stor_get_info: skipping RESET..\n"); 1171 else 1172 ss->transport_reset(ss); 1173 1174 pccb->pdata = usb_stor_buf; 1175 1176 dev_desc->target = dev->devnum; 1177 pccb->lun = dev_desc->lun; 1178 USB_STOR_PRINTF(" address %d\n",dev_desc->target); 1179 1180 if(usb_inquiry(pccb,ss)) 1181 return -1; 1182 1183 perq = usb_stor_buf[0]; 1184 modi = usb_stor_buf[1]; 1185 if((perq & 0x1f) == 0x1f) { 1186 return 0; /* skip unknown devices */ 1187 } 1188 if((modi&0x80) == 0x80) {/* drive is removable */ 1189 dev_desc->removable = 1; 1190 } 1191 memcpy(&dev_desc->vendor[0], &usb_stor_buf[8], 8); 1192 memcpy(&dev_desc->product[0], &usb_stor_buf[16], 16); 1193 memcpy(&dev_desc->revision[0], &usb_stor_buf[32], 4); 1194 dev_desc->vendor[8] = 0; 1195 dev_desc->product[16] = 0; 1196 dev_desc->revision[4] = 0; 1197 #ifdef CONFIG_USB_BIN_FIXUP 1198 usb_bin_fixup(dev->descriptor, (uchar *)dev_desc->vendor, (uchar *)dev_desc->product); 1199 #endif /* CONFIG_USB_BIN_FIXUP */ 1200 USB_STOR_PRINTF("ISO Vers %X, Response Data %X\n",usb_stor_buf[2],usb_stor_buf[3]); 1201 if(usb_test_unit_ready(pccb,ss)) { 1202 printf("Device NOT ready\n Request Sense returned %02X %02X %02X\n",pccb->sense_buf[2],pccb->sense_buf[12],pccb->sense_buf[13]); 1203 if(dev_desc->removable == 1) { 1204 dev_desc->type = perq; 1205 return 1; 1206 } 1207 else 1208 return 0; 1209 } 1210 pccb->pdata = (unsigned char *)&cap[0]; 1211 memset(pccb->pdata,0,8); 1212 if(usb_read_capacity(pccb,ss) != 0) { 1213 printf("READ_CAP ERROR\n"); 1214 cap[0] = 2880; 1215 cap[1] = 0x200; 1216 } 1217 USB_STOR_PRINTF("Read Capacity returns: 0x%lx, 0x%lx\n",cap[0],cap[1]); 1218 #if 0 1219 if(cap[0]>(0x200000 * 10)) /* greater than 10 GByte */ 1220 cap[0]>>=16; 1221 #endif 1222 cap[0] = cpu_to_be32(cap[0]); 1223 cap[1] = cpu_to_be32(cap[1]); 1224 1225 /* this assumes bigendian! */ 1226 cap[0] += 1; 1227 capacity = &cap[0]; 1228 blksz = &cap[1]; 1229 USB_STOR_PRINTF("Capacity = 0x%lx, blocksz = 0x%lx\n",*capacity,*blksz); 1230 dev_desc->lba = *capacity; 1231 dev_desc->blksz = *blksz; 1232 dev_desc->type = perq; 1233 USB_STOR_PRINTF(" address %d\n",dev_desc->target); 1234 USB_STOR_PRINTF("partype: %d\n",dev_desc->part_type); 1235 1236 init_part(dev_desc); 1237 1238 USB_STOR_PRINTF("partype: %d\n",dev_desc->part_type); 1239 return 1; 1240 } 1241