1 /* 2 * Most of this source has been derived from the Linux USB 3 * project: 4 * (C) Copyright Linus Torvalds 1999 5 * (C) Copyright Johannes Erdfelt 1999-2001 6 * (C) Copyright Andreas Gal 1999 7 * (C) Copyright Gregory P. Smith 1999 8 * (C) Copyright Deti Fliegl 1999 (new USB architecture) 9 * (C) Copyright Randy Dunlap 2000 10 * (C) Copyright David Brownell 2000 (kernel hotplug, usb_device_id) 11 * (C) Copyright Yggdrasil Computing, Inc. 2000 12 * (usb_device_id matching changes by Adam J. Richter) 13 * 14 * Adapted for U-Boot: 15 * (C) Copyright 2001 Denis Peter, MPL AG Switzerland 16 * 17 * SPDX-License-Identifier: GPL-2.0+ 18 */ 19 20 /**************************************************************************** 21 * HUB "Driver" 22 * Probes device for being a hub and configurate it 23 */ 24 25 #include <common.h> 26 #include <command.h> 27 #include <asm/processor.h> 28 #include <asm/unaligned.h> 29 #include <linux/ctype.h> 30 #include <asm/byteorder.h> 31 #include <asm/unaligned.h> 32 33 #include <usb.h> 34 #ifdef CONFIG_4xx 35 #include <asm/4xx_pci.h> 36 #endif 37 38 #define USB_BUFSIZ 512 39 40 static struct usb_hub_device hub_dev[USB_MAX_HUB]; 41 static int usb_hub_index; 42 43 __weak void usb_hub_reset_devices(int port) 44 { 45 return; 46 } 47 48 static int usb_get_hub_descriptor(struct usb_device *dev, void *data, int size) 49 { 50 return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 51 USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB, 52 USB_DT_HUB << 8, 0, data, size, USB_CNTL_TIMEOUT); 53 } 54 55 static int usb_clear_port_feature(struct usb_device *dev, int port, int feature) 56 { 57 return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 58 USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, 59 port, NULL, 0, USB_CNTL_TIMEOUT); 60 } 61 62 static int usb_set_port_feature(struct usb_device *dev, int port, int feature) 63 { 64 return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 65 USB_REQ_SET_FEATURE, USB_RT_PORT, feature, 66 port, NULL, 0, USB_CNTL_TIMEOUT); 67 } 68 69 static int usb_get_hub_status(struct usb_device *dev, void *data) 70 { 71 return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 72 USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0, 73 data, sizeof(struct usb_hub_status), USB_CNTL_TIMEOUT); 74 } 75 76 static int usb_get_port_status(struct usb_device *dev, int port, void *data) 77 { 78 return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 79 USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port, 80 data, sizeof(struct usb_hub_status), USB_CNTL_TIMEOUT); 81 } 82 83 84 static void usb_hub_power_on(struct usb_hub_device *hub) 85 { 86 int i; 87 struct usb_device *dev; 88 unsigned pgood_delay = hub->desc.bPwrOn2PwrGood * 2; 89 90 dev = hub->pusb_dev; 91 92 debug("enabling power on all ports\n"); 93 for (i = 0; i < dev->maxchild; i++) { 94 usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER); 95 debug("port %d returns %lX\n", i + 1, dev->status); 96 } 97 98 /* 99 * Wait for power to become stable, 100 * plus spec-defined max time for device to connect 101 */ 102 mdelay(pgood_delay + 1000); 103 } 104 105 void usb_hub_reset(void) 106 { 107 usb_hub_index = 0; 108 } 109 110 static struct usb_hub_device *usb_hub_allocate(void) 111 { 112 if (usb_hub_index < USB_MAX_HUB) 113 return &hub_dev[usb_hub_index++]; 114 115 printf("ERROR: USB_MAX_HUB (%d) reached\n", USB_MAX_HUB); 116 return NULL; 117 } 118 119 #define MAX_TRIES 5 120 121 static inline char *portspeed(int portstatus) 122 { 123 char *speed_str; 124 125 switch (portstatus & USB_PORT_STAT_SPEED_MASK) { 126 case USB_PORT_STAT_SUPER_SPEED: 127 speed_str = "5 Gb/s"; 128 break; 129 case USB_PORT_STAT_HIGH_SPEED: 130 speed_str = "480 Mb/s"; 131 break; 132 case USB_PORT_STAT_LOW_SPEED: 133 speed_str = "1.5 Mb/s"; 134 break; 135 default: 136 speed_str = "12 Mb/s"; 137 break; 138 } 139 140 return speed_str; 141 } 142 143 int hub_port_reset(struct usb_device *dev, int port, 144 unsigned short *portstat) 145 { 146 int tries; 147 ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1); 148 unsigned short portstatus, portchange; 149 150 debug("hub_port_reset: resetting port %d...\n", port); 151 for (tries = 0; tries < MAX_TRIES; tries++) { 152 153 usb_set_port_feature(dev, port + 1, USB_PORT_FEAT_RESET); 154 mdelay(200); 155 156 if (usb_get_port_status(dev, port + 1, portsts) < 0) { 157 debug("get_port_status failed status %lX\n", 158 dev->status); 159 return -1; 160 } 161 portstatus = le16_to_cpu(portsts->wPortStatus); 162 portchange = le16_to_cpu(portsts->wPortChange); 163 164 debug("portstatus %x, change %x, %s\n", portstatus, portchange, 165 portspeed(portstatus)); 166 167 debug("STAT_C_CONNECTION = %d STAT_CONNECTION = %d" \ 168 " USB_PORT_STAT_ENABLE %d\n", 169 (portchange & USB_PORT_STAT_C_CONNECTION) ? 1 : 0, 170 (portstatus & USB_PORT_STAT_CONNECTION) ? 1 : 0, 171 (portstatus & USB_PORT_STAT_ENABLE) ? 1 : 0); 172 173 /* 174 * Perhaps we should check for the following here: 175 * - C_CONNECTION hasn't been set. 176 * - CONNECTION is still set. 177 * 178 * Doing so would ensure that the device is still connected 179 * to the bus, and hasn't been unplugged or replaced while the 180 * USB bus reset was going on. 181 * 182 * However, if we do that, then (at least) a San Disk Ultra 183 * USB 3.0 16GB device fails to reset on (at least) an NVIDIA 184 * Tegra Jetson TK1 board. For some reason, the device appears 185 * to briefly drop off the bus when this second bus reset is 186 * executed, yet if we retry this loop, it'll eventually come 187 * back after another reset or two. 188 */ 189 190 if (portstatus & USB_PORT_STAT_ENABLE) 191 break; 192 193 mdelay(200); 194 } 195 196 if (tries == MAX_TRIES) { 197 debug("Cannot enable port %i after %i retries, " \ 198 "disabling port.\n", port + 1, MAX_TRIES); 199 debug("Maybe the USB cable is bad?\n"); 200 return -1; 201 } 202 203 usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_RESET); 204 *portstat = portstatus; 205 return 0; 206 } 207 208 209 void usb_hub_port_connect_change(struct usb_device *dev, int port) 210 { 211 struct usb_device *usb; 212 ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1); 213 unsigned short portstatus; 214 215 /* Check status */ 216 if (usb_get_port_status(dev, port + 1, portsts) < 0) { 217 debug("get_port_status failed\n"); 218 return; 219 } 220 221 portstatus = le16_to_cpu(portsts->wPortStatus); 222 debug("portstatus %x, change %x, %s\n", 223 portstatus, 224 le16_to_cpu(portsts->wPortChange), 225 portspeed(portstatus)); 226 227 /* Clear the connection change status */ 228 usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_CONNECTION); 229 230 /* Disconnect any existing devices under this port */ 231 if (((!(portstatus & USB_PORT_STAT_CONNECTION)) && 232 (!(portstatus & USB_PORT_STAT_ENABLE))) || (dev->children[port])) { 233 debug("usb_disconnect(&hub->children[port]);\n"); 234 /* Return now if nothing is connected */ 235 if (!(portstatus & USB_PORT_STAT_CONNECTION)) 236 return; 237 } 238 mdelay(200); 239 240 /* Reset the port */ 241 if (hub_port_reset(dev, port, &portstatus) < 0) { 242 printf("cannot reset port %i!?\n", port + 1); 243 return; 244 } 245 246 mdelay(200); 247 248 /* Allocate a new device struct for it */ 249 usb = usb_alloc_new_device(dev->controller); 250 251 switch (portstatus & USB_PORT_STAT_SPEED_MASK) { 252 case USB_PORT_STAT_SUPER_SPEED: 253 usb->speed = USB_SPEED_SUPER; 254 break; 255 case USB_PORT_STAT_HIGH_SPEED: 256 usb->speed = USB_SPEED_HIGH; 257 break; 258 case USB_PORT_STAT_LOW_SPEED: 259 usb->speed = USB_SPEED_LOW; 260 break; 261 default: 262 usb->speed = USB_SPEED_FULL; 263 break; 264 } 265 266 dev->children[port] = usb; 267 usb->parent = dev; 268 usb->portnr = port + 1; 269 /* Run it through the hoops (find a driver, etc) */ 270 if (usb_new_device(usb)) { 271 /* Woops, disable the port */ 272 usb_free_device(); 273 dev->children[port] = NULL; 274 debug("hub: disabling port %d\n", port + 1); 275 usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_ENABLE); 276 } 277 } 278 279 280 static int usb_hub_configure(struct usb_device *dev) 281 { 282 int i, length; 283 ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, USB_BUFSIZ); 284 unsigned char *bitmap; 285 short hubCharacteristics; 286 struct usb_hub_descriptor *descriptor; 287 struct usb_hub_device *hub; 288 __maybe_unused struct usb_hub_status *hubsts; 289 290 /* "allocate" Hub device */ 291 hub = usb_hub_allocate(); 292 if (hub == NULL) 293 return -1; 294 hub->pusb_dev = dev; 295 /* Get the the hub descriptor */ 296 if (usb_get_hub_descriptor(dev, buffer, 4) < 0) { 297 debug("usb_hub_configure: failed to get hub " \ 298 "descriptor, giving up %lX\n", dev->status); 299 return -1; 300 } 301 descriptor = (struct usb_hub_descriptor *)buffer; 302 303 length = min_t(int, descriptor->bLength, 304 sizeof(struct usb_hub_descriptor)); 305 306 if (usb_get_hub_descriptor(dev, buffer, length) < 0) { 307 debug("usb_hub_configure: failed to get hub " \ 308 "descriptor 2nd giving up %lX\n", dev->status); 309 return -1; 310 } 311 memcpy((unsigned char *)&hub->desc, buffer, length); 312 /* adjust 16bit values */ 313 put_unaligned(le16_to_cpu(get_unaligned( 314 &descriptor->wHubCharacteristics)), 315 &hub->desc.wHubCharacteristics); 316 /* set the bitmap */ 317 bitmap = (unsigned char *)&hub->desc.DeviceRemovable[0]; 318 /* devices not removable by default */ 319 memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8); 320 bitmap = (unsigned char *)&hub->desc.PortPowerCtrlMask[0]; 321 memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8); /* PowerMask = 1B */ 322 323 for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++) 324 hub->desc.DeviceRemovable[i] = descriptor->DeviceRemovable[i]; 325 326 for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++) 327 hub->desc.PortPowerCtrlMask[i] = descriptor->PortPowerCtrlMask[i]; 328 329 dev->maxchild = descriptor->bNbrPorts; 330 debug("%d ports detected\n", dev->maxchild); 331 332 hubCharacteristics = get_unaligned(&hub->desc.wHubCharacteristics); 333 switch (hubCharacteristics & HUB_CHAR_LPSM) { 334 case 0x00: 335 debug("ganged power switching\n"); 336 break; 337 case 0x01: 338 debug("individual port power switching\n"); 339 break; 340 case 0x02: 341 case 0x03: 342 debug("unknown reserved power switching mode\n"); 343 break; 344 } 345 346 if (hubCharacteristics & HUB_CHAR_COMPOUND) 347 debug("part of a compound device\n"); 348 else 349 debug("standalone hub\n"); 350 351 switch (hubCharacteristics & HUB_CHAR_OCPM) { 352 case 0x00: 353 debug("global over-current protection\n"); 354 break; 355 case 0x08: 356 debug("individual port over-current protection\n"); 357 break; 358 case 0x10: 359 case 0x18: 360 debug("no over-current protection\n"); 361 break; 362 } 363 364 debug("power on to power good time: %dms\n", 365 descriptor->bPwrOn2PwrGood * 2); 366 debug("hub controller current requirement: %dmA\n", 367 descriptor->bHubContrCurrent); 368 369 for (i = 0; i < dev->maxchild; i++) 370 debug("port %d is%s removable\n", i + 1, 371 hub->desc.DeviceRemovable[(i + 1) / 8] & \ 372 (1 << ((i + 1) % 8)) ? " not" : ""); 373 374 if (sizeof(struct usb_hub_status) > USB_BUFSIZ) { 375 debug("usb_hub_configure: failed to get Status - " \ 376 "too long: %d\n", descriptor->bLength); 377 return -1; 378 } 379 380 if (usb_get_hub_status(dev, buffer) < 0) { 381 debug("usb_hub_configure: failed to get Status %lX\n", 382 dev->status); 383 return -1; 384 } 385 386 #ifdef DEBUG 387 hubsts = (struct usb_hub_status *)buffer; 388 #endif 389 390 debug("get_hub_status returned status %X, change %X\n", 391 le16_to_cpu(hubsts->wHubStatus), 392 le16_to_cpu(hubsts->wHubChange)); 393 debug("local power source is %s\n", 394 (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_LOCAL_POWER) ? \ 395 "lost (inactive)" : "good"); 396 debug("%sover-current condition exists\n", 397 (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_OVERCURRENT) ? \ 398 "" : "no "); 399 usb_hub_power_on(hub); 400 401 /* 402 * Reset any devices that may be in a bad state when applying 403 * the power. This is a __weak function. Resetting of the devices 404 * should occur in the board file of the device. 405 */ 406 for (i = 0; i < dev->maxchild; i++) 407 usb_hub_reset_devices(i + 1); 408 409 for (i = 0; i < dev->maxchild; i++) { 410 ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1); 411 unsigned short portstatus, portchange; 412 int ret; 413 ulong start = get_timer(0); 414 415 /* 416 * Wait for (whichever finishes first) 417 * - A maximum of 10 seconds 418 * This is a purely observational value driven by connecting 419 * a few broken pen drives and taking the max * 1.5 approach 420 * - connection_change and connection state to report same 421 * state 422 */ 423 do { 424 ret = usb_get_port_status(dev, i + 1, portsts); 425 if (ret < 0) { 426 debug("get_port_status failed\n"); 427 break; 428 } 429 430 portstatus = le16_to_cpu(portsts->wPortStatus); 431 portchange = le16_to_cpu(portsts->wPortChange); 432 433 if ((portchange & USB_PORT_STAT_C_CONNECTION) == 434 (portstatus & USB_PORT_STAT_CONNECTION)) 435 break; 436 437 } while (get_timer(start) < CONFIG_SYS_HZ * 10); 438 439 if (ret < 0) 440 continue; 441 442 debug("Port %d Status %X Change %X\n", 443 i + 1, portstatus, portchange); 444 445 if (portchange & USB_PORT_STAT_C_CONNECTION) { 446 debug("port %d connection change\n", i + 1); 447 usb_hub_port_connect_change(dev, i); 448 } 449 if (portchange & USB_PORT_STAT_C_ENABLE) { 450 debug("port %d enable change, status %x\n", 451 i + 1, portstatus); 452 usb_clear_port_feature(dev, i + 1, 453 USB_PORT_FEAT_C_ENABLE); 454 /* 455 * The following hack causes a ghost device problem 456 * to Faraday EHCI 457 */ 458 #ifndef CONFIG_USB_EHCI_FARADAY 459 /* EM interference sometimes causes bad shielded USB 460 * devices to be shutdown by the hub, this hack enables 461 * them again. Works at least with mouse driver */ 462 if (!(portstatus & USB_PORT_STAT_ENABLE) && 463 (portstatus & USB_PORT_STAT_CONNECTION) && 464 ((dev->children[i]))) { 465 debug("already running port %i " \ 466 "disabled by hub (EMI?), " \ 467 "re-enabling...\n", i + 1); 468 usb_hub_port_connect_change(dev, i); 469 } 470 #endif 471 } 472 if (portstatus & USB_PORT_STAT_SUSPEND) { 473 debug("port %d suspend change\n", i + 1); 474 usb_clear_port_feature(dev, i + 1, 475 USB_PORT_FEAT_SUSPEND); 476 } 477 478 if (portchange & USB_PORT_STAT_C_OVERCURRENT) { 479 debug("port %d over-current change\n", i + 1); 480 usb_clear_port_feature(dev, i + 1, 481 USB_PORT_FEAT_C_OVER_CURRENT); 482 usb_hub_power_on(hub); 483 } 484 485 if (portchange & USB_PORT_STAT_C_RESET) { 486 debug("port %d reset change\n", i + 1); 487 usb_clear_port_feature(dev, i + 1, 488 USB_PORT_FEAT_C_RESET); 489 } 490 } /* end for i all ports */ 491 492 return 0; 493 } 494 495 int usb_hub_probe(struct usb_device *dev, int ifnum) 496 { 497 struct usb_interface *iface; 498 struct usb_endpoint_descriptor *ep; 499 int ret; 500 501 iface = &dev->config.if_desc[ifnum]; 502 /* Is it a hub? */ 503 if (iface->desc.bInterfaceClass != USB_CLASS_HUB) 504 return 0; 505 /* Some hubs have a subclass of 1, which AFAICT according to the */ 506 /* specs is not defined, but it works */ 507 if ((iface->desc.bInterfaceSubClass != 0) && 508 (iface->desc.bInterfaceSubClass != 1)) 509 return 0; 510 /* Multiple endpoints? What kind of mutant ninja-hub is this? */ 511 if (iface->desc.bNumEndpoints != 1) 512 return 0; 513 ep = &iface->ep_desc[0]; 514 /* Output endpoint? Curiousier and curiousier.. */ 515 if (!(ep->bEndpointAddress & USB_DIR_IN)) 516 return 0; 517 /* If it's not an interrupt endpoint, we'd better punt! */ 518 if ((ep->bmAttributes & 3) != 3) 519 return 0; 520 /* We found a hub */ 521 debug("USB hub found\n"); 522 ret = usb_hub_configure(dev); 523 return ret; 524 } 525