1 /* 2 * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il> 3 * 4 * Authors: Igor Grinberg <grinberg@compulab.co.il> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <common.h> 10 #include <bmp_layout.h> 11 #include <errno.h> 12 #include <fs.h> 13 #include <fdt_support.h> 14 #include <image.h> 15 #include <nand.h> 16 #include <sata.h> 17 #include <spi.h> 18 #include <spi_flash.h> 19 #include <splash.h> 20 #include <usb.h> 21 22 DECLARE_GLOBAL_DATA_PTR; 23 24 #ifdef CONFIG_SPI_FLASH 25 static struct spi_flash *sf; 26 static int splash_sf_read_raw(u32 bmp_load_addr, int offset, size_t read_size) 27 { 28 if (!sf) { 29 sf = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, 30 CONFIG_SF_DEFAULT_CS, 31 CONFIG_SF_DEFAULT_SPEED, 32 CONFIG_SF_DEFAULT_MODE); 33 if (!sf) 34 return -ENODEV; 35 } 36 37 return spi_flash_read(sf, offset, read_size, (void *)bmp_load_addr); 38 } 39 #else 40 static int splash_sf_read_raw(u32 bmp_load_addr, int offset, size_t read_size) 41 { 42 debug("%s: sf support not available\n", __func__); 43 return -ENOSYS; 44 } 45 #endif 46 47 #ifdef CONFIG_CMD_NAND 48 static int splash_nand_read_raw(u32 bmp_load_addr, int offset, size_t read_size) 49 { 50 struct mtd_info *mtd = get_nand_dev_by_index(nand_curr_device); 51 return nand_read_skip_bad(mtd, offset, 52 &read_size, NULL, 53 mtd->size, 54 (u_char *)bmp_load_addr); 55 } 56 #else 57 static int splash_nand_read_raw(u32 bmp_load_addr, int offset, size_t read_size) 58 { 59 debug("%s: nand support not available\n", __func__); 60 return -ENOSYS; 61 } 62 #endif 63 64 static int splash_storage_read_raw(struct splash_location *location, 65 u32 bmp_load_addr, size_t read_size) 66 { 67 u32 offset; 68 69 if (!location) 70 return -EINVAL; 71 72 offset = location->offset; 73 switch (location->storage) { 74 case SPLASH_STORAGE_NAND: 75 return splash_nand_read_raw(bmp_load_addr, offset, read_size); 76 case SPLASH_STORAGE_SF: 77 return splash_sf_read_raw(bmp_load_addr, offset, read_size); 78 default: 79 printf("Unknown splash location\n"); 80 } 81 82 return -EINVAL; 83 } 84 85 static int splash_load_raw(struct splash_location *location, u32 bmp_load_addr) 86 { 87 struct bmp_header *bmp_hdr; 88 int res; 89 size_t bmp_size, bmp_header_size = sizeof(struct bmp_header); 90 91 if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp) 92 goto splash_address_too_high; 93 94 res = splash_storage_read_raw(location, bmp_load_addr, bmp_header_size); 95 if (res < 0) 96 return res; 97 98 bmp_hdr = (struct bmp_header *)bmp_load_addr; 99 bmp_size = le32_to_cpu(bmp_hdr->file_size); 100 101 if (bmp_load_addr + bmp_size >= gd->start_addr_sp) 102 goto splash_address_too_high; 103 104 return splash_storage_read_raw(location, bmp_load_addr, bmp_size); 105 106 splash_address_too_high: 107 printf("Error: splashimage address too high. Data overwrites U-Boot and/or placed beyond DRAM boundaries.\n"); 108 109 return -EFAULT; 110 } 111 112 static int splash_select_fs_dev(struct splash_location *location) 113 { 114 int res; 115 116 switch (location->storage) { 117 case SPLASH_STORAGE_MMC: 118 res = fs_set_blk_dev("mmc", location->devpart, FS_TYPE_ANY); 119 break; 120 case SPLASH_STORAGE_USB: 121 res = fs_set_blk_dev("usb", location->devpart, FS_TYPE_ANY); 122 break; 123 case SPLASH_STORAGE_SATA: 124 res = fs_set_blk_dev("sata", location->devpart, FS_TYPE_ANY); 125 break; 126 case SPLASH_STORAGE_NAND: 127 if (location->ubivol != NULL) 128 res = fs_set_blk_dev("ubi", NULL, FS_TYPE_UBIFS); 129 else 130 res = -ENODEV; 131 break; 132 default: 133 printf("Error: unsupported location storage.\n"); 134 return -ENODEV; 135 } 136 137 if (res) 138 printf("Error: could not access storage.\n"); 139 140 return res; 141 } 142 143 #ifdef CONFIG_USB_STORAGE 144 static int splash_init_usb(void) 145 { 146 int err; 147 148 err = usb_init(); 149 if (err) 150 return err; 151 152 #ifndef CONFIG_DM_USB 153 err = usb_stor_scan(1) < 0 ? -ENODEV : 0; 154 #endif 155 156 return err; 157 } 158 #else 159 static inline int splash_init_usb(void) 160 { 161 printf("Cannot load splash image: no USB support\n"); 162 return -ENOSYS; 163 } 164 #endif 165 166 #ifdef CONFIG_SATA 167 static int splash_init_sata(void) 168 { 169 return sata_initialize(); 170 } 171 #else 172 static inline int splash_init_sata(void) 173 { 174 printf("Cannot load splash image: no SATA support\n"); 175 return -ENOSYS; 176 } 177 #endif 178 179 #ifdef CONFIG_CMD_UBIFS 180 static int splash_mount_ubifs(struct splash_location *location) 181 { 182 int res; 183 char cmd[32]; 184 185 sprintf(cmd, "ubi part %s", location->mtdpart); 186 res = run_command(cmd, 0); 187 if (res) 188 return res; 189 190 sprintf(cmd, "ubifsmount %s", location->ubivol); 191 res = run_command(cmd, 0); 192 193 return res; 194 } 195 196 static inline int splash_umount_ubifs(void) 197 { 198 return run_command("ubifsumount", 0); 199 } 200 #else 201 static inline int splash_mount_ubifs(struct splash_location *location) 202 { 203 printf("Cannot load splash image: no UBIFS support\n"); 204 return -ENOSYS; 205 } 206 207 static inline int splash_umount_ubifs(void) 208 { 209 printf("Cannot unmount UBIFS: no UBIFS support\n"); 210 return -ENOSYS; 211 } 212 #endif 213 214 #define SPLASH_SOURCE_DEFAULT_FILE_NAME "splash.bmp" 215 216 static int splash_load_fs(struct splash_location *location, u32 bmp_load_addr) 217 { 218 int res = 0; 219 loff_t bmp_size; 220 loff_t actread; 221 char *splash_file; 222 223 splash_file = getenv("splashfile"); 224 if (!splash_file) 225 splash_file = SPLASH_SOURCE_DEFAULT_FILE_NAME; 226 227 if (location->storage == SPLASH_STORAGE_USB) 228 res = splash_init_usb(); 229 230 if (location->storage == SPLASH_STORAGE_SATA) 231 res = splash_init_sata(); 232 233 if (location->ubivol != NULL) 234 res = splash_mount_ubifs(location); 235 236 if (res) 237 return res; 238 239 res = splash_select_fs_dev(location); 240 if (res) 241 goto out; 242 243 res = fs_size(splash_file, &bmp_size); 244 if (res) { 245 printf("Error (%d): cannot determine file size\n", res); 246 goto out; 247 } 248 249 if (bmp_load_addr + bmp_size >= gd->start_addr_sp) { 250 printf("Error: splashimage address too high. Data overwrites U-Boot and/or placed beyond DRAM boundaries.\n"); 251 res = -EFAULT; 252 goto out; 253 } 254 255 splash_select_fs_dev(location); 256 res = fs_read(splash_file, bmp_load_addr, 0, 0, &actread); 257 258 out: 259 if (location->ubivol != NULL) 260 splash_umount_ubifs(); 261 262 return res; 263 } 264 265 /** 266 * select_splash_location - return the splash location based on board support 267 * and env variable "splashsource". 268 * 269 * @locations: An array of supported splash locations. 270 * @size: Size of splash_locations array. 271 * 272 * @return: If a null set of splash locations is given, or 273 * splashsource env variable is set to unsupported value 274 * return NULL. 275 * If splashsource env variable is not defined 276 * return the first entry in splash_locations as default. 277 * If splashsource env variable contains a supported value 278 * return the location selected by splashsource. 279 */ 280 static struct splash_location *select_splash_location( 281 struct splash_location *locations, uint size) 282 { 283 int i; 284 char *env_splashsource; 285 286 if (!locations || size == 0) 287 return NULL; 288 289 env_splashsource = getenv("splashsource"); 290 if (env_splashsource == NULL) 291 return &locations[0]; 292 293 for (i = 0; i < size; i++) { 294 if (!strcmp(locations[i].name, env_splashsource)) 295 return &locations[i]; 296 } 297 298 printf("splashsource env variable set to unsupported value\n"); 299 return NULL; 300 } 301 302 #ifdef CONFIG_FIT 303 static int splash_load_fit(struct splash_location *location, u32 bmp_load_addr) 304 { 305 int res; 306 int node_offset; 307 int splash_offset; 308 int splash_size; 309 struct image_header *img_header; 310 const u32 *fit_header; 311 u32 fit_size; 312 const size_t header_size = sizeof(struct image_header); 313 314 /* Read in image header */ 315 res = splash_storage_read_raw(location, bmp_load_addr, header_size); 316 if (res < 0) 317 return res; 318 319 img_header = (struct image_header *)bmp_load_addr; 320 fit_size = fdt_totalsize(img_header); 321 322 /* Read in entire FIT */ 323 fit_header = (const u32 *)(bmp_load_addr + header_size); 324 res = splash_storage_read_raw(location, (u32)fit_header, fit_size); 325 if (res < 0) 326 return res; 327 328 res = fit_check_format(fit_header); 329 if (!res) { 330 debug("Could not find valid FIT image\n"); 331 return -EINVAL; 332 } 333 334 node_offset = fit_image_get_node(fit_header, location->name); 335 if (node_offset < 0) { 336 debug("Could not find splash image '%s' in FIT\n", 337 location->name); 338 return -ENOENT; 339 } 340 341 res = fit_image_get_data_offset(fit_header, node_offset, 342 &splash_offset); 343 if (res < 0) { 344 printf("Failed to load splash image (err=%d)\n", res); 345 return res; 346 } 347 348 res = fit_image_get_data_size(fit_header, node_offset, &splash_size); 349 if (res < 0) { 350 printf("Failed to load splash image (err=%d)\n", res); 351 return res; 352 } 353 354 /* Align data offset to 4-byte boundrary */ 355 fit_size = fdt_totalsize(fit_header); 356 fit_size = (fit_size + 3) & ~3; 357 358 /* Read in the splash data */ 359 location->offset = (location->offset + fit_size + splash_offset); 360 res = splash_storage_read_raw(location, bmp_load_addr , splash_size); 361 if (res < 0) 362 return res; 363 364 return 0; 365 } 366 #endif /* CONFIG_FIT */ 367 368 /** 369 * splash_source_load - load splash image from a supported location. 370 * 371 * Select a splash image location based on the value of splashsource environment 372 * variable and the board supported splash source locations, and load a 373 * splashimage to the address pointed to by splashimage environment variable. 374 * 375 * @locations: An array of supported splash locations. 376 * @size: Size of splash_locations array. 377 * 378 * @return: 0 on success, negative value on failure. 379 */ 380 int splash_source_load(struct splash_location *locations, uint size) 381 { 382 struct splash_location *splash_location; 383 char *env_splashimage_value; 384 u32 bmp_load_addr; 385 386 env_splashimage_value = getenv("splashimage"); 387 if (env_splashimage_value == NULL) 388 return -ENOENT; 389 390 bmp_load_addr = simple_strtoul(env_splashimage_value, 0, 16); 391 if (bmp_load_addr == 0) { 392 printf("Error: bad splashimage address specified\n"); 393 return -EFAULT; 394 } 395 396 splash_location = select_splash_location(locations, size); 397 if (!splash_location) 398 return -EINVAL; 399 400 if (splash_location->flags == SPLASH_STORAGE_RAW) 401 return splash_load_raw(splash_location, bmp_load_addr); 402 else if (splash_location->flags == SPLASH_STORAGE_FS) 403 return splash_load_fs(splash_location, bmp_load_addr); 404 #ifdef CONFIG_FIT 405 else if (splash_location->flags == SPLASH_STORAGE_FIT) 406 return splash_load_fit(splash_location, bmp_load_addr); 407 #endif 408 return -EINVAL; 409 } 410