1 /* 2 * Copyright (C) 2011 OMICRON electronics GmbH 3 * 4 * based on drivers/mtd/nand/nand_spl_load.c 5 * 6 * Copyright (C) 2011 7 * Heiko Schocher, DENX Software Engineering, hs@denx.de. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #include <common.h> 13 #include <spi.h> 14 #include <spi_flash.h> 15 #include <errno.h> 16 #include <spl.h> 17 18 #ifdef CONFIG_SPL_OS_BOOT 19 /* 20 * Load the kernel, check for a valid header we can parse, and if found load 21 * the kernel and then device tree. 22 */ 23 static int spi_load_image_os(struct spl_image_info *spl_image, 24 struct spi_flash *flash, 25 struct image_header *header) 26 { 27 int err; 28 29 /* Read for a header, parse or error out. */ 30 spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS, 0x40, 31 (void *)header); 32 33 if (image_get_magic(header) != IH_MAGIC) 34 return -1; 35 36 err = spl_parse_image_header(spl_image, header); 37 if (err) 38 return err; 39 40 spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS, 41 spl_image->size, (void *)spl_image->load_addr); 42 43 /* Read device tree. */ 44 spi_flash_read(flash, CONFIG_SYS_SPI_ARGS_OFFS, 45 CONFIG_SYS_SPI_ARGS_SIZE, 46 (void *)CONFIG_SYS_SPL_ARGS_ADDR); 47 48 return 0; 49 } 50 #endif 51 52 static ulong spl_spi_fit_read(struct spl_load_info *load, ulong sector, 53 ulong count, void *buf) 54 { 55 struct spi_flash *flash = load->dev; 56 ulong ret; 57 58 ret = spi_flash_read(flash, sector, count, buf); 59 if (!ret) 60 return count; 61 else 62 return 0; 63 } 64 /* 65 * The main entry for SPI booting. It's necessary that SDRAM is already 66 * configured and available since this code loads the main U-Boot image 67 * from SPI into SDRAM and starts it from there. 68 */ 69 static int spl_spi_load_image(struct spl_image_info *spl_image, 70 struct spl_boot_device *bootdev) 71 { 72 int err = 0; 73 struct spi_flash *flash; 74 struct image_header *header; 75 76 /* 77 * Load U-Boot image from SPI flash into RAM 78 */ 79 80 flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, 81 CONFIG_SF_DEFAULT_CS, 82 CONFIG_SF_DEFAULT_SPEED, 83 CONFIG_SF_DEFAULT_MODE); 84 if (!flash) { 85 puts("SPI probe failed.\n"); 86 return -ENODEV; 87 } 88 89 /* use CONFIG_SYS_TEXT_BASE as temporary storage area */ 90 header = (struct image_header *)(CONFIG_SYS_TEXT_BASE); 91 92 #ifdef CONFIG_SPL_OS_BOOT 93 if (spl_start_uboot() || spi_load_image_os(spl_image, flash, header)) 94 #endif 95 { 96 /* Load u-boot, mkimage header is 64 bytes. */ 97 err = spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40, 98 (void *)header); 99 if (err) 100 return err; 101 102 if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) && 103 image_get_magic(header) == FDT_MAGIC) { 104 struct spl_load_info load; 105 106 debug("Found FIT\n"); 107 load.dev = flash; 108 load.priv = NULL; 109 load.filename = NULL; 110 load.bl_len = 1; 111 load.read = spl_spi_fit_read; 112 err = spl_load_simple_fit(spl_image, &load, 113 CONFIG_SYS_SPI_U_BOOT_OFFS, 114 header); 115 } else { 116 err = spl_parse_image_header(spl_image, header); 117 if (err) 118 return err; 119 err = spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, 120 spl_image->size, 121 (void *)spl_image->load_addr); 122 } 123 } 124 125 return err; 126 } 127 /* Use priorty 1 so that boards can override this */ 128 SPL_LOAD_IMAGE_METHOD("SPI", 1, BOOT_DEVICE_SPI, spl_spi_load_image); 129