xref: /openbmc/u-boot/common/spl/spl_fit.c (revision cbcbf71b)
1 /*
2  * Copyright (C) 2016 Google, Inc
3  * Written by Simon Glass <sjg@chromium.org>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7 
8 #include <common.h>
9 #include <errno.h>
10 #include <image.h>
11 #include <libfdt.h>
12 #include <spl.h>
13 
14 static ulong fdt_getprop_u32(const void *fdt, int node, const char *prop)
15 {
16 	const u32 *cell;
17 	int len;
18 
19 	cell = fdt_getprop(fdt, node, prop, &len);
20 	if (len != sizeof(*cell))
21 		return -1U;
22 	return fdt32_to_cpu(*cell);
23 }
24 
25 static int spl_fit_select_fdt(const void *fdt, int images, int *fdt_offsetp)
26 {
27 	const char *name, *fdt_name;
28 	int conf, node, fdt_node;
29 	int len;
30 
31 	*fdt_offsetp = 0;
32 	conf = fdt_path_offset(fdt, FIT_CONFS_PATH);
33 	if (conf < 0) {
34 		debug("%s: Cannot find /configurations node: %d\n", __func__,
35 		      conf);
36 		return -EINVAL;
37 	}
38 	for (node = fdt_first_subnode(fdt, conf);
39 	     node >= 0;
40 	     node = fdt_next_subnode(fdt, node)) {
41 		name = fdt_getprop(fdt, node, "description", &len);
42 		if (!name) {
43 #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
44 			printf("%s: Missing FDT description in DTB\n",
45 			       __func__);
46 #endif
47 			return -EINVAL;
48 		}
49 		if (board_fit_config_name_match(name))
50 			continue;
51 
52 		debug("Selecting config '%s'", name);
53 		fdt_name = fdt_getprop(fdt, node, FIT_FDT_PROP, &len);
54 		if (!fdt_name) {
55 			debug("%s: Cannot find fdt name property: %d\n",
56 			      __func__, len);
57 			return -EINVAL;
58 		}
59 
60 		debug(", fdt '%s'\n", fdt_name);
61 		fdt_node = fdt_subnode_offset(fdt, images, fdt_name);
62 		if (fdt_node < 0) {
63 			debug("%s: Cannot find fdt node '%s': %d\n",
64 			      __func__, fdt_name, fdt_node);
65 			return -EINVAL;
66 		}
67 
68 		*fdt_offsetp = fdt_getprop_u32(fdt, fdt_node, "data-offset");
69 		len = fdt_getprop_u32(fdt, fdt_node, "data-size");
70 		debug("FIT: Selected '%s'\n", name);
71 
72 		return len;
73 	}
74 
75 #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
76 	printf("No matching DT out of these options:\n");
77 	for (node = fdt_first_subnode(fdt, conf);
78 	     node >= 0;
79 	     node = fdt_next_subnode(fdt, node)) {
80 		name = fdt_getprop(fdt, node, "description", &len);
81 		printf("   %s\n", name);
82 	}
83 #endif
84 
85 	return -ENOENT;
86 }
87 
88 static int get_aligned_image_offset(struct spl_load_info *info, int offset)
89 {
90 	/*
91 	 * If it is a FS read, get the first address before offset which is
92 	 * aligned to ARCH_DMA_MINALIGN. If it is raw read return the
93 	 * block number to which offset belongs.
94 	 */
95 	if (info->filename)
96 		return offset & ~(ARCH_DMA_MINALIGN - 1);
97 
98 	return offset / info->bl_len;
99 }
100 
101 static int get_aligned_image_overhead(struct spl_load_info *info, int offset)
102 {
103 	/*
104 	 * If it is a FS read, get the difference between the offset and
105 	 * the first address before offset which is aligned to
106 	 * ARCH_DMA_MINALIGN. If it is raw read return the offset within the
107 	 * block.
108 	 */
109 	if (info->filename)
110 		return offset & (ARCH_DMA_MINALIGN - 1);
111 
112 	return offset % info->bl_len;
113 }
114 
115 static int get_aligned_image_size(struct spl_load_info *info, int data_size,
116 				  int offset)
117 {
118 	data_size = data_size + get_aligned_image_overhead(info, offset);
119 
120 	if (info->filename)
121 		return data_size;
122 
123 	return (data_size + info->bl_len - 1) / info->bl_len;
124 }
125 
126 int spl_load_simple_fit(struct spl_image_info *spl_image,
127 			struct spl_load_info *info, ulong sector, void *fit)
128 {
129 	int sectors;
130 	ulong size, load;
131 	unsigned long count;
132 	int node, images;
133 	void *load_ptr;
134 	int fdt_offset, fdt_len;
135 	int data_offset, data_size;
136 	int base_offset, align_len = ARCH_DMA_MINALIGN - 1;
137 	int src_sector;
138 	void *dst, *src;
139 
140 	/*
141 	 * Figure out where the external images start. This is the base for the
142 	 * data-offset properties in each image.
143 	 */
144 	size = fdt_totalsize(fit);
145 	size = (size + 3) & ~3;
146 	base_offset = (size + 3) & ~3;
147 
148 	/*
149 	 * So far we only have one block of data from the FIT. Read the entire
150 	 * thing, including that first block, placing it so it finishes before
151 	 * where we will load the image.
152 	 *
153 	 * Note that we will load the image such that its first byte will be
154 	 * at the load address. Since that byte may be part-way through a
155 	 * block, we may load the image up to one block before the load
156 	 * address. So take account of that here by subtracting an addition
157 	 * block length from the FIT start position.
158 	 *
159 	 * In fact the FIT has its own load address, but we assume it cannot
160 	 * be before CONFIG_SYS_TEXT_BASE.
161 	 */
162 	fit = (void *)((CONFIG_SYS_TEXT_BASE - size - info->bl_len -
163 			align_len) & ~align_len);
164 	sectors = get_aligned_image_size(info, size, 0);
165 	count = info->read(info, sector, sectors, fit);
166 	debug("fit read sector %lx, sectors=%d, dst=%p, count=%lu\n",
167 	      sector, sectors, fit, count);
168 	if (count == 0)
169 		return -EIO;
170 
171 	/* find the firmware image to load */
172 	images = fdt_path_offset(fit, FIT_IMAGES_PATH);
173 	if (images < 0) {
174 		debug("%s: Cannot find /images node: %d\n", __func__, images);
175 		return -1;
176 	}
177 	node = fdt_first_subnode(fit, images);
178 	if (node < 0) {
179 		debug("%s: Cannot find first image node: %d\n", __func__, node);
180 		return -1;
181 	}
182 
183 	/* Get its information and set up the spl_image structure */
184 	data_offset = fdt_getprop_u32(fit, node, "data-offset");
185 	data_size = fdt_getprop_u32(fit, node, "data-size");
186 	load = fdt_getprop_u32(fit, node, "load");
187 	debug("data_offset=%x, data_size=%x\n", data_offset, data_size);
188 	spl_image->load_addr = load;
189 	spl_image->entry_point = load;
190 	spl_image->os = IH_OS_U_BOOT;
191 
192 	/*
193 	 * Work out where to place the image. We read it so that the first
194 	 * byte will be at 'load'. This may mean we need to load it starting
195 	 * before then, since we can only read whole blocks.
196 	 */
197 	data_offset += base_offset;
198 	sectors = get_aligned_image_size(info, data_size, data_offset);
199 	load_ptr = (void *)load;
200 	debug("U-Boot size %x, data %p\n", data_size, load_ptr);
201 	dst = load_ptr;
202 
203 	/* Read the image */
204 	src_sector = sector + get_aligned_image_offset(info, data_offset);
205 	debug("Aligned image read: dst=%p, src_sector=%x, sectors=%x\n",
206 	      dst, src_sector, sectors);
207 	count = info->read(info, src_sector, sectors, dst);
208 	if (count != sectors)
209 		return -EIO;
210 	debug("image: dst=%p, data_offset=%x, size=%x\n", dst, data_offset,
211 	      data_size);
212 	src = dst + get_aligned_image_overhead(info, data_offset);
213 
214 #ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
215 	board_fit_image_post_process((void **)&src, (size_t *)&data_size);
216 #endif
217 
218 	memcpy(dst, src, data_size);
219 
220 	/* Figure out which device tree the board wants to use */
221 	fdt_len = spl_fit_select_fdt(fit, images, &fdt_offset);
222 	if (fdt_len < 0)
223 		return fdt_len;
224 
225 	/*
226 	 * Read the device tree and place it after the image. There may be
227 	 * some extra data before it since we can only read entire blocks.
228 	 * And also align the destination address to ARCH_DMA_MINALIGN.
229 	 */
230 	dst = (void *)((load + data_size + align_len) & ~align_len);
231 	fdt_offset += base_offset;
232 	sectors = get_aligned_image_size(info, fdt_len, fdt_offset);
233 	src_sector = sector + get_aligned_image_offset(info, fdt_offset);
234 	count = info->read(info, src_sector, sectors, dst);
235 	debug("Aligned fdt read: dst %p, src_sector = %x, sectors %x\n",
236 	      dst, src_sector, sectors);
237 	if (count != sectors)
238 		return -EIO;
239 
240 	/*
241 	 * Copy the device tree so that it starts immediately after the image.
242 	 * After this we will have the U-Boot image and its device tree ready
243 	 * for us to start.
244 	 */
245 	debug("fdt: dst=%p, data_offset=%x, size=%x\n", dst, fdt_offset,
246 	      fdt_len);
247 	src = dst + get_aligned_image_overhead(info, fdt_offset);
248 	dst = load_ptr + data_size;
249 
250 #ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
251 	board_fit_image_post_process((void **)&src, (size_t *)&fdt_len);
252 #endif
253 
254 	memcpy(dst, src, fdt_len);
255 
256 	return 0;
257 }
258