1 /* 2 * Copyright (C) 2016 Google, Inc 3 * Written by Simon Glass <sjg@chromium.org> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <errno.h> 10 #include <image.h> 11 #include <linux/libfdt.h> 12 #include <spl.h> 13 14 #ifndef CONFIG_SYS_BOOTM_LEN 15 #define CONFIG_SYS_BOOTM_LEN (64 << 20) 16 #endif 17 18 /** 19 * spl_fit_get_image_name(): By using the matching configuration subnode, 20 * retrieve the name of an image, specified by a property name and an index 21 * into that. 22 * @fit: Pointer to the FDT blob. 23 * @images: Offset of the /images subnode. 24 * @type: Name of the property within the configuration subnode. 25 * @index: Index into the list of strings in this property. 26 * @outname: Name of the image 27 * 28 * Return: 0 on success, or a negative error number 29 */ 30 static int spl_fit_get_image_name(const void *fit, int images, 31 const char *type, int index, 32 char **outname) 33 { 34 const char *name, *str; 35 __maybe_unused int node; 36 int conf_node; 37 int len, i; 38 39 conf_node = fit_find_config_node(fit); 40 if (conf_node < 0) { 41 #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT 42 printf("No matching DT out of these options:\n"); 43 for (node = fdt_first_subnode(fit, conf_node); 44 node >= 0; 45 node = fdt_next_subnode(fit, node)) { 46 name = fdt_getprop(fit, node, "description", &len); 47 printf(" %s\n", name); 48 } 49 #endif 50 return conf_node; 51 } 52 53 name = fdt_getprop(fit, conf_node, type, &len); 54 if (!name) { 55 debug("cannot find property '%s': %d\n", type, len); 56 return -EINVAL; 57 } 58 59 str = name; 60 for (i = 0; i < index; i++) { 61 str = strchr(str, '\0') + 1; 62 if (!str || (str - name >= len)) { 63 debug("no string for index %d\n", index); 64 return -E2BIG; 65 } 66 } 67 68 *outname = (char *)str; 69 return 0; 70 } 71 72 /** 73 * spl_fit_get_image_node(): By using the matching configuration subnode, 74 * retrieve the name of an image, specified by a property name and an index 75 * into that. 76 * @fit: Pointer to the FDT blob. 77 * @images: Offset of the /images subnode. 78 * @type: Name of the property within the configuration subnode. 79 * @index: Index into the list of strings in this property. 80 * 81 * Return: the node offset of the respective image node or a negative 82 * error number. 83 */ 84 static int spl_fit_get_image_node(const void *fit, int images, 85 const char *type, int index) 86 { 87 char *str; 88 int err; 89 int node; 90 91 err = spl_fit_get_image_name(fit, images, type, index, &str); 92 if (err) 93 return err; 94 95 debug("%s: '%s'\n", type, str); 96 97 node = fdt_subnode_offset(fit, images, str); 98 if (node < 0) { 99 debug("cannot find image node '%s': %d\n", str, node); 100 return -EINVAL; 101 } 102 103 return node; 104 } 105 106 static int get_aligned_image_offset(struct spl_load_info *info, int offset) 107 { 108 /* 109 * If it is a FS read, get the first address before offset which is 110 * aligned to ARCH_DMA_MINALIGN. If it is raw read return the 111 * block number to which offset belongs. 112 */ 113 if (info->filename) 114 return offset & ~(ARCH_DMA_MINALIGN - 1); 115 116 return offset / info->bl_len; 117 } 118 119 static int get_aligned_image_overhead(struct spl_load_info *info, int offset) 120 { 121 /* 122 * If it is a FS read, get the difference between the offset and 123 * the first address before offset which is aligned to 124 * ARCH_DMA_MINALIGN. If it is raw read return the offset within the 125 * block. 126 */ 127 if (info->filename) 128 return offset & (ARCH_DMA_MINALIGN - 1); 129 130 return offset % info->bl_len; 131 } 132 133 static int get_aligned_image_size(struct spl_load_info *info, int data_size, 134 int offset) 135 { 136 data_size = data_size + get_aligned_image_overhead(info, offset); 137 138 if (info->filename) 139 return data_size; 140 141 return (data_size + info->bl_len - 1) / info->bl_len; 142 } 143 144 /** 145 * spl_load_fit_image(): load the image described in a certain FIT node 146 * @info: points to information about the device to load data from 147 * @sector: the start sector of the FIT image on the device 148 * @fit: points to the flattened device tree blob describing the FIT 149 * image 150 * @base_offset: the beginning of the data area containing the actual 151 * image data, relative to the beginning of the FIT 152 * @node: offset of the DT node describing the image to load (relative 153 * to @fit) 154 * @image_info: will be filled with information about the loaded image 155 * If the FIT node does not contain a "load" (address) property, 156 * the image gets loaded to the address pointed to by the 157 * load_addr member in this struct. 158 * 159 * Return: 0 on success or a negative error number. 160 */ 161 static int spl_load_fit_image(struct spl_load_info *info, ulong sector, 162 void *fit, ulong base_offset, int node, 163 struct spl_image_info *image_info) 164 { 165 int offset; 166 size_t length; 167 int len; 168 ulong size; 169 ulong load_addr, load_ptr; 170 void *src; 171 ulong overhead; 172 int nr_sectors; 173 int align_len = ARCH_DMA_MINALIGN - 1; 174 uint8_t image_comp = -1, type = -1; 175 const void *data; 176 bool external_data = false; 177 178 if (IS_ENABLED(CONFIG_SPL_OS_BOOT) && IS_ENABLED(CONFIG_SPL_GZIP)) { 179 if (fit_image_get_comp(fit, node, &image_comp)) 180 puts("Cannot get image compression format.\n"); 181 else 182 debug("%s ", genimg_get_comp_name(image_comp)); 183 184 if (fit_image_get_type(fit, node, &type)) 185 puts("Cannot get image type.\n"); 186 else 187 debug("%s ", genimg_get_type_name(type)); 188 } 189 190 if (fit_image_get_load(fit, node, &load_addr)) 191 load_addr = image_info->load_addr; 192 193 if (!fit_image_get_data_position(fit, node, &offset)) { 194 external_data = true; 195 } else if (!fit_image_get_data_offset(fit, node, &offset)) { 196 offset += base_offset; 197 external_data = true; 198 } 199 200 if (external_data) { 201 /* External data */ 202 if (fit_image_get_data_size(fit, node, &len)) 203 return -ENOENT; 204 205 load_ptr = (load_addr + align_len) & ~align_len; 206 length = len; 207 208 overhead = get_aligned_image_overhead(info, offset); 209 nr_sectors = get_aligned_image_size(info, length, offset); 210 211 if (info->read(info, 212 sector + get_aligned_image_offset(info, offset), 213 nr_sectors, (void *)load_ptr) != nr_sectors) 214 return -EIO; 215 216 debug("External data: dst=%lx, offset=%x, size=%lx\n", 217 load_ptr, offset, (unsigned long)length); 218 src = (void *)load_ptr + overhead; 219 } else { 220 /* Embedded data */ 221 if (fit_image_get_data(fit, node, &data, &length)) { 222 puts("Cannot get image data/size\n"); 223 return -ENOENT; 224 } 225 debug("Embedded data: dst=%lx, size=%lx\n", load_addr, 226 (unsigned long)length); 227 src = (void *)data; 228 } 229 230 #ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS 231 board_fit_image_post_process(&src, &length); 232 #endif 233 234 if (IS_ENABLED(CONFIG_SPL_OS_BOOT) && 235 IS_ENABLED(CONFIG_SPL_GZIP) && 236 image_comp == IH_COMP_GZIP && 237 type == IH_TYPE_KERNEL) { 238 size = length; 239 if (gunzip((void *)load_addr, CONFIG_SYS_BOOTM_LEN, 240 src, &size)) { 241 puts("Uncompressing error\n"); 242 return -EIO; 243 } 244 length = size; 245 } else { 246 memcpy((void *)load_addr, src, length); 247 } 248 249 if (image_info) { 250 image_info->load_addr = load_addr; 251 image_info->size = length; 252 image_info->entry_point = fdt_getprop_u32(fit, node, "entry"); 253 } 254 255 return 0; 256 } 257 258 static int spl_fit_append_fdt(struct spl_image_info *spl_image, 259 struct spl_load_info *info, ulong sector, 260 void *fit, int images, ulong base_offset) 261 { 262 struct spl_image_info image_info; 263 int node, ret; 264 265 /* Figure out which device tree the board wants to use */ 266 node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0); 267 if (node < 0) { 268 debug("%s: cannot find FDT node\n", __func__); 269 return node; 270 } 271 272 /* 273 * Read the device tree and place it after the image. 274 * Align the destination address to ARCH_DMA_MINALIGN. 275 */ 276 image_info.load_addr = spl_image->load_addr + spl_image->size; 277 ret = spl_load_fit_image(info, sector, fit, base_offset, node, 278 &image_info); 279 280 if (ret < 0) 281 return ret; 282 283 /* Make the load-address of the FDT available for the SPL framework */ 284 spl_image->fdt_addr = (void *)image_info.load_addr; 285 #if !CONFIG_IS_ENABLED(FIT_IMAGE_TINY) 286 /* Try to make space, so we can inject details on the loadables */ 287 ret = fdt_shrink_to_minimum(spl_image->fdt_addr, 8192); 288 #endif 289 290 return ret; 291 } 292 293 static int spl_fit_record_loadable(const void *fit, int images, int index, 294 void *blob, struct spl_image_info *image) 295 { 296 int ret = 0; 297 #if !CONFIG_IS_ENABLED(FIT_IMAGE_TINY) 298 char *name; 299 int node; 300 301 ret = spl_fit_get_image_name(fit, images, "loadables", 302 index, &name); 303 if (ret < 0) 304 return ret; 305 306 node = spl_fit_get_image_node(fit, images, "loadables", index); 307 308 ret = fdt_record_loadable(blob, index, name, image->load_addr, 309 image->size, image->entry_point, 310 fdt_getprop(fit, node, "type", NULL), 311 fdt_getprop(fit, node, "os", NULL)); 312 #endif 313 return ret; 314 } 315 316 static int spl_fit_image_get_os(const void *fit, int noffset, uint8_t *os) 317 { 318 #if CONFIG_IS_ENABLED(FIT_IMAGE_TINY) 319 return -ENOTSUPP; 320 #else 321 return fit_image_get_os(fit, noffset, os); 322 #endif 323 } 324 325 int spl_load_simple_fit(struct spl_image_info *spl_image, 326 struct spl_load_info *info, ulong sector, void *fit) 327 { 328 int sectors; 329 ulong size; 330 unsigned long count; 331 struct spl_image_info image_info; 332 int node = -1; 333 int images, ret; 334 int base_offset, align_len = ARCH_DMA_MINALIGN - 1; 335 int index = 0; 336 337 /* 338 * For FIT with external data, figure out where the external images 339 * start. This is the base for the data-offset properties in each 340 * image. 341 */ 342 size = fdt_totalsize(fit); 343 size = (size + 3) & ~3; 344 base_offset = (size + 3) & ~3; 345 346 /* 347 * So far we only have one block of data from the FIT. Read the entire 348 * thing, including that first block, placing it so it finishes before 349 * where we will load the image. 350 * 351 * Note that we will load the image such that its first byte will be 352 * at the load address. Since that byte may be part-way through a 353 * block, we may load the image up to one block before the load 354 * address. So take account of that here by subtracting an addition 355 * block length from the FIT start position. 356 * 357 * In fact the FIT has its own load address, but we assume it cannot 358 * be before CONFIG_SYS_TEXT_BASE. 359 * 360 * For FIT with data embedded, data is loaded as part of FIT image. 361 * For FIT with external data, data is not loaded in this step. 362 */ 363 fit = (void *)((CONFIG_SYS_TEXT_BASE - size - info->bl_len - 364 align_len) & ~align_len); 365 sectors = get_aligned_image_size(info, size, 0); 366 count = info->read(info, sector, sectors, fit); 367 debug("fit read sector %lx, sectors=%d, dst=%p, count=%lu\n", 368 sector, sectors, fit, count); 369 if (count == 0) 370 return -EIO; 371 372 /* find the node holding the images information */ 373 images = fdt_path_offset(fit, FIT_IMAGES_PATH); 374 if (images < 0) { 375 debug("%s: Cannot find /images node: %d\n", __func__, images); 376 return -1; 377 } 378 379 /* 380 * Find the U-Boot image using the following search order: 381 * - start at 'firmware' (e.g. an ARM Trusted Firmware) 382 * - fall back 'kernel' (e.g. a Falcon-mode OS boot 383 * - fall back to using the first 'loadables' entry 384 */ 385 if (node < 0) 386 node = spl_fit_get_image_node(fit, images, "firmware", 0); 387 #ifdef CONFIG_SPL_OS_BOOT 388 if (node < 0) 389 node = spl_fit_get_image_node(fit, images, FIT_KERNEL_PROP, 0); 390 #endif 391 if (node < 0) { 392 debug("could not find firmware image, trying loadables...\n"); 393 node = spl_fit_get_image_node(fit, images, "loadables", 0); 394 /* 395 * If we pick the U-Boot image from "loadables", start at 396 * the second image when later loading additional images. 397 */ 398 index = 1; 399 } 400 if (node < 0) { 401 debug("%s: Cannot find u-boot image node: %d\n", 402 __func__, node); 403 return -1; 404 } 405 406 /* Load the image and set up the spl_image structure */ 407 ret = spl_load_fit_image(info, sector, fit, base_offset, node, 408 spl_image); 409 if (ret) 410 return ret; 411 412 /* 413 * For backward compatibility, we treat the first node that is 414 * as a U-Boot image, if no OS-type has been declared. 415 */ 416 if (!spl_fit_image_get_os(fit, node, &spl_image->os)) 417 debug("Image OS is %s\n", genimg_get_os_name(spl_image->os)); 418 #if !defined(CONFIG_SPL_OS_BOOT) 419 else 420 spl_image->os = IH_OS_U_BOOT; 421 #endif 422 423 /* 424 * Booting a next-stage U-Boot may require us to append the FDT. 425 * We allow this to fail, as the U-Boot image might embed its FDT. 426 */ 427 if (spl_image->os == IH_OS_U_BOOT) 428 spl_fit_append_fdt(spl_image, info, sector, fit, 429 images, base_offset); 430 431 /* Now check if there are more images for us to load */ 432 for (; ; index++) { 433 uint8_t os_type = IH_OS_INVALID; 434 435 node = spl_fit_get_image_node(fit, images, "loadables", index); 436 if (node < 0) 437 break; 438 439 ret = spl_load_fit_image(info, sector, fit, base_offset, node, 440 &image_info); 441 if (ret < 0) 442 continue; 443 444 if (!spl_fit_image_get_os(fit, node, &os_type)) 445 debug("Loadable is %s\n", genimg_get_os_name(os_type)); 446 447 if (os_type == IH_OS_U_BOOT) { 448 spl_fit_append_fdt(&image_info, info, sector, 449 fit, images, base_offset); 450 spl_image->fdt_addr = image_info.fdt_addr; 451 } 452 453 /* 454 * If the "firmware" image did not provide an entry point, 455 * use the first valid entry point from the loadables. 456 */ 457 if (spl_image->entry_point == FDT_ERROR && 458 image_info.entry_point != FDT_ERROR) 459 spl_image->entry_point = image_info.entry_point; 460 461 /* Record our loadables into the FDT */ 462 if (spl_image->fdt_addr) 463 spl_fit_record_loadable(fit, images, index, 464 spl_image->fdt_addr, 465 &image_info); 466 } 467 468 /* 469 * If a platform does not provide CONFIG_SYS_UBOOT_START, U-Boot's 470 * Makefile will set it to 0 and it will end up as the entry point 471 * here. What it actually means is: use the load address. 472 */ 473 if (spl_image->entry_point == FDT_ERROR || spl_image->entry_point == 0) 474 spl_image->entry_point = spl_image->load_addr; 475 476 return 0; 477 } 478