1 /* 2 * Copyright (C) 2016 Google, Inc 3 * Written by Simon Glass <sjg@chromium.org> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <errno.h> 10 #include <image.h> 11 #include <libfdt.h> 12 #include <spl.h> 13 14 static ulong fdt_getprop_u32(const void *fdt, int node, const char *prop) 15 { 16 const u32 *cell; 17 int len; 18 19 cell = fdt_getprop(fdt, node, prop, &len); 20 if (len != sizeof(*cell)) 21 return -1U; 22 return fdt32_to_cpu(*cell); 23 } 24 25 static int spl_fit_select_fdt(const void *fdt, int images, int *fdt_offsetp) 26 { 27 const char *name, *fdt_name; 28 int conf, node, fdt_node; 29 int len; 30 31 *fdt_offsetp = 0; 32 conf = fdt_path_offset(fdt, FIT_CONFS_PATH); 33 if (conf < 0) { 34 debug("%s: Cannot find /configurations node: %d\n", __func__, 35 conf); 36 return -EINVAL; 37 } 38 for (node = fdt_first_subnode(fdt, conf); 39 node >= 0; 40 node = fdt_next_subnode(fdt, node)) { 41 name = fdt_getprop(fdt, node, "description", &len); 42 if (!name) { 43 #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT 44 printf("%s: Missing FDT description in DTB\n", 45 __func__); 46 #endif 47 return -EINVAL; 48 } 49 if (board_fit_config_name_match(name)) 50 continue; 51 52 debug("Selecting config '%s'", name); 53 fdt_name = fdt_getprop(fdt, node, FIT_FDT_PROP, &len); 54 if (!fdt_name) { 55 debug("%s: Cannot find fdt name property: %d\n", 56 __func__, len); 57 return -EINVAL; 58 } 59 60 debug(", fdt '%s'\n", fdt_name); 61 fdt_node = fdt_subnode_offset(fdt, images, fdt_name); 62 if (fdt_node < 0) { 63 debug("%s: Cannot find fdt node '%s': %d\n", 64 __func__, fdt_name, fdt_node); 65 return -EINVAL; 66 } 67 68 *fdt_offsetp = fdt_getprop_u32(fdt, fdt_node, "data-offset"); 69 len = fdt_getprop_u32(fdt, fdt_node, "data-size"); 70 debug("FIT: Selected '%s'\n", name); 71 72 return len; 73 } 74 75 #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT 76 printf("No matching DT out of these options:\n"); 77 for (node = fdt_first_subnode(fdt, conf); 78 node >= 0; 79 node = fdt_next_subnode(fdt, node)) { 80 name = fdt_getprop(fdt, node, "description", &len); 81 printf(" %s\n", name); 82 } 83 #endif 84 85 return -ENOENT; 86 } 87 88 static int get_aligned_image_offset(struct spl_load_info *info, int offset) 89 { 90 /* 91 * If it is a FS read, get the first address before offset which is 92 * aligned to ARCH_DMA_MINALIGN. If it is raw read return the 93 * block number to which offset belongs. 94 */ 95 if (info->filename) 96 return offset & ~(ARCH_DMA_MINALIGN - 1); 97 98 return offset / info->bl_len; 99 } 100 101 static int get_aligned_image_overhead(struct spl_load_info *info, int offset) 102 { 103 /* 104 * If it is a FS read, get the difference between the offset and 105 * the first address before offset which is aligned to 106 * ARCH_DMA_MINALIGN. If it is raw read return the offset within the 107 * block. 108 */ 109 if (info->filename) 110 return offset & (ARCH_DMA_MINALIGN - 1); 111 112 return offset % info->bl_len; 113 } 114 115 static int get_aligned_image_size(struct spl_load_info *info, int data_size, 116 int offset) 117 { 118 data_size = data_size + get_aligned_image_overhead(info, offset); 119 120 if (info->filename) 121 return data_size; 122 123 return (data_size + info->bl_len - 1) / info->bl_len; 124 } 125 126 int spl_load_simple_fit(struct spl_load_info *info, ulong sector, void *fit) 127 { 128 int sectors; 129 ulong size, load; 130 unsigned long count; 131 int node, images; 132 void *load_ptr; 133 int fdt_offset, fdt_len; 134 int data_offset, data_size; 135 int base_offset, align_len = ARCH_DMA_MINALIGN - 1; 136 int src_sector; 137 void *dst, *src; 138 139 /* 140 * Figure out where the external images start. This is the base for the 141 * data-offset properties in each image. 142 */ 143 size = fdt_totalsize(fit); 144 size = (size + 3) & ~3; 145 base_offset = (size + 3) & ~3; 146 147 /* 148 * So far we only have one block of data from the FIT. Read the entire 149 * thing, including that first block, placing it so it finishes before 150 * where we will load the image. 151 * 152 * Note that we will load the image such that its first byte will be 153 * at the load address. Since that byte may be part-way through a 154 * block, we may load the image up to one block before the load 155 * address. So take account of that here by subtracting an addition 156 * block length from the FIT start position. 157 * 158 * In fact the FIT has its own load address, but we assume it cannot 159 * be before CONFIG_SYS_TEXT_BASE. 160 */ 161 fit = (void *)((CONFIG_SYS_TEXT_BASE - size - info->bl_len - 162 align_len) & ~align_len); 163 sectors = get_aligned_image_size(info, size, 0); 164 count = info->read(info, sector, sectors, fit); 165 debug("fit read sector %lx, sectors=%d, dst=%p, count=%lu\n", 166 sector, sectors, fit, count); 167 if (count == 0) 168 return -EIO; 169 170 /* find the firmware image to load */ 171 images = fdt_path_offset(fit, FIT_IMAGES_PATH); 172 if (images < 0) { 173 debug("%s: Cannot find /images node: %d\n", __func__, images); 174 return -1; 175 } 176 node = fdt_first_subnode(fit, images); 177 if (node < 0) { 178 debug("%s: Cannot find first image node: %d\n", __func__, node); 179 return -1; 180 } 181 182 /* Get its information and set up the spl_image structure */ 183 data_offset = fdt_getprop_u32(fit, node, "data-offset"); 184 data_size = fdt_getprop_u32(fit, node, "data-size"); 185 load = fdt_getprop_u32(fit, node, "load"); 186 debug("data_offset=%x, data_size=%x\n", data_offset, data_size); 187 spl_image.load_addr = load; 188 spl_image.entry_point = load; 189 spl_image.os = IH_OS_U_BOOT; 190 191 /* 192 * Work out where to place the image. We read it so that the first 193 * byte will be at 'load'. This may mean we need to load it starting 194 * before then, since we can only read whole blocks. 195 */ 196 data_offset += base_offset; 197 sectors = get_aligned_image_size(info, data_size, data_offset); 198 load_ptr = (void *)load; 199 debug("U-Boot size %x, data %p\n", data_size, load_ptr); 200 dst = load_ptr; 201 202 /* Read the image */ 203 src_sector = sector + get_aligned_image_offset(info, data_offset); 204 debug("Aligned image read: dst=%p, src_sector=%x, sectors=%x\n", 205 dst, src_sector, sectors); 206 count = info->read(info, src_sector, sectors, dst); 207 if (count != sectors) 208 return -EIO; 209 debug("image: dst=%p, data_offset=%x, size=%x\n", dst, data_offset, 210 data_size); 211 src = dst + get_aligned_image_overhead(info, data_offset); 212 213 #ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS 214 board_fit_image_post_process((void **)&src, (size_t *)&data_size); 215 #endif 216 217 memcpy(dst, src, data_size); 218 219 /* Figure out which device tree the board wants to use */ 220 fdt_len = spl_fit_select_fdt(fit, images, &fdt_offset); 221 if (fdt_len < 0) 222 return fdt_len; 223 224 /* 225 * Read the device tree and place it after the image. There may be 226 * some extra data before it since we can only read entire blocks. 227 * And also align the destination address to ARCH_DMA_MINALIGN. 228 */ 229 dst = (void *)((load + data_size + align_len) & ~align_len); 230 fdt_offset += base_offset; 231 sectors = get_aligned_image_size(info, fdt_len, fdt_offset); 232 src_sector = sector + get_aligned_image_offset(info, fdt_offset); 233 count = info->read(info, src_sector, sectors, dst); 234 debug("Aligned fdt read: dst %p, src_sector = %x, sectors %x\n", 235 dst, src_sector, sectors); 236 if (count != sectors) 237 return -EIO; 238 239 /* 240 * Copy the device tree so that it starts immediately after the image. 241 * After this we will have the U-Boot image and its device tree ready 242 * for us to start. 243 */ 244 debug("fdt: dst=%p, data_offset=%x, size=%x\n", dst, fdt_offset, 245 fdt_len); 246 src = dst + get_aligned_image_overhead(info, fdt_offset); 247 dst = load_ptr + data_size; 248 249 #ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS 250 board_fit_image_post_process((void **)&src, (size_t *)&fdt_len); 251 #endif 252 253 memcpy(dst, src, fdt_len); 254 255 return 0; 256 } 257