1 /* 2 * (C) Copyright 2010 3 * Texas Instruments, <www.ti.com> 4 * 5 * Aneesh V <aneesh@ti.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 #include <common.h> 10 #include <dm.h> 11 #include <spl.h> 12 #include <asm/u-boot.h> 13 #include <nand.h> 14 #include <fat.h> 15 #include <version.h> 16 #include <i2c.h> 17 #include <image.h> 18 #include <malloc.h> 19 #include <dm/root.h> 20 #include <linux/compiler.h> 21 22 DECLARE_GLOBAL_DATA_PTR; 23 24 #ifndef CONFIG_SYS_UBOOT_START 25 #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE 26 #endif 27 #ifndef CONFIG_SYS_MONITOR_LEN 28 /* Unknown U-Boot size, let's assume it will not be more than 200 KB */ 29 #define CONFIG_SYS_MONITOR_LEN (200 * 1024) 30 #endif 31 32 u32 *boot_params_ptr = NULL; 33 struct spl_image_info spl_image; 34 35 /* Define board data structure */ 36 static bd_t bdata __attribute__ ((section(".data"))); 37 38 /* 39 * Default function to determine if u-boot or the OS should 40 * be started. This implementation always returns 1. 41 * 42 * Please implement your own board specific funcion to do this. 43 * 44 * RETURN 45 * 0 to not start u-boot 46 * positive if u-boot should start 47 */ 48 #ifdef CONFIG_SPL_OS_BOOT 49 __weak int spl_start_uboot(void) 50 { 51 puts("SPL: Please implement spl_start_uboot() for your board\n"); 52 puts("SPL: Direct Linux boot not active!\n"); 53 return 1; 54 } 55 #endif 56 57 /* 58 * Weak default function for board specific cleanup/preparation before 59 * Linux boot. Some boards/platforms might not need it, so just provide 60 * an empty stub here. 61 */ 62 __weak void spl_board_prepare_for_linux(void) 63 { 64 /* Nothing to do! */ 65 } 66 67 void spl_set_header_raw_uboot(void) 68 { 69 spl_image.size = CONFIG_SYS_MONITOR_LEN; 70 spl_image.entry_point = CONFIG_SYS_UBOOT_START; 71 spl_image.load_addr = CONFIG_SYS_TEXT_BASE; 72 spl_image.os = IH_OS_U_BOOT; 73 spl_image.name = "U-Boot"; 74 } 75 76 void spl_parse_image_header(const struct image_header *header) 77 { 78 u32 header_size = sizeof(struct image_header); 79 80 if (image_get_magic(header) == IH_MAGIC) { 81 if (spl_image.flags & SPL_COPY_PAYLOAD_ONLY) { 82 /* 83 * On some system (e.g. powerpc), the load-address and 84 * entry-point is located at address 0. We can't load 85 * to 0-0x40. So skip header in this case. 86 */ 87 spl_image.load_addr = image_get_load(header); 88 spl_image.entry_point = image_get_ep(header); 89 spl_image.size = image_get_data_size(header); 90 } else { 91 spl_image.entry_point = image_get_load(header); 92 /* Load including the header */ 93 spl_image.load_addr = spl_image.entry_point - 94 header_size; 95 spl_image.size = image_get_data_size(header) + 96 header_size; 97 } 98 spl_image.os = image_get_os(header); 99 spl_image.name = image_get_name(header); 100 debug("spl: payload image: %.*s load addr: 0x%x size: %d\n", 101 (int)sizeof(spl_image.name), spl_image.name, 102 spl_image.load_addr, spl_image.size); 103 } else { 104 #ifdef CONFIG_SPL_PANIC_ON_RAW_IMAGE 105 /* 106 * CONFIG_SPL_PANIC_ON_RAW_IMAGE is defined when the 107 * code which loads images in SPL cannot guarantee that 108 * absolutely all read errors will be reported. 109 * An example is the LPC32XX MLC NAND driver, which 110 * will consider that a completely unreadable NAND block 111 * is bad, and thus should be skipped silently. 112 */ 113 panic("** no mkimage signature but raw image not supported"); 114 #else 115 /* Signature not found - assume u-boot.bin */ 116 debug("mkimage signature not found - ih_magic = %x\n", 117 header->ih_magic); 118 spl_set_header_raw_uboot(); 119 #endif 120 } 121 } 122 123 __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) 124 { 125 typedef void __noreturn (*image_entry_noargs_t)(void); 126 127 image_entry_noargs_t image_entry = 128 (image_entry_noargs_t)(unsigned long)spl_image->entry_point; 129 130 debug("image entry point: 0x%X\n", spl_image->entry_point); 131 image_entry(); 132 } 133 134 #ifdef CONFIG_SPL_RAM_DEVICE 135 static int spl_ram_load_image(void) 136 { 137 const struct image_header *header; 138 139 /* 140 * Get the header. It will point to an address defined by handoff 141 * which will tell where the image located inside the flash. For 142 * now, it will temporary fixed to address pointed by U-Boot. 143 */ 144 header = (struct image_header *) 145 (CONFIG_SYS_TEXT_BASE - sizeof(struct image_header)); 146 147 spl_parse_image_header(header); 148 149 return 0; 150 } 151 #endif 152 153 int spl_init(void) 154 { 155 int ret; 156 157 debug("spl_init()\n"); 158 #if defined(CONFIG_SYS_MALLOC_F_LEN) 159 gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN; 160 gd->malloc_ptr = 0; 161 #endif 162 if (CONFIG_IS_ENABLED(OF_CONTROL)) { 163 ret = fdtdec_setup(); 164 if (ret) { 165 debug("fdtdec_setup() returned error %d\n", ret); 166 return ret; 167 } 168 } 169 if (IS_ENABLED(CONFIG_SPL_DM)) { 170 ret = dm_init_and_scan(true); 171 if (ret) { 172 debug("dm_init_and_scan() returned error %d\n", ret); 173 return ret; 174 } 175 } 176 gd->flags |= GD_FLG_SPL_INIT; 177 178 return 0; 179 } 180 181 #ifndef BOOT_DEVICE_NONE 182 #define BOOT_DEVICE_NONE 0xdeadbeef 183 #endif 184 185 static u32 spl_boot_list[] = { 186 BOOT_DEVICE_NONE, 187 BOOT_DEVICE_NONE, 188 BOOT_DEVICE_NONE, 189 BOOT_DEVICE_NONE, 190 BOOT_DEVICE_NONE, 191 }; 192 193 __weak void board_boot_order(u32 *spl_boot_list) 194 { 195 spl_boot_list[0] = spl_boot_device(); 196 } 197 198 #ifdef CONFIG_SPL_BOARD_LOAD_IMAGE 199 __weak void spl_board_announce_boot_device(void) { } 200 #endif 201 202 #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT 203 struct boot_device_name { 204 u32 boot_dev; 205 const char *name; 206 }; 207 208 struct boot_device_name boot_name_table[] = { 209 #ifdef CONFIG_SPL_RAM_DEVICE 210 { BOOT_DEVICE_RAM, "RAM" }, 211 #endif 212 #ifdef CONFIG_SPL_MMC_SUPPORT 213 { BOOT_DEVICE_MMC1, "MMC" }, 214 { BOOT_DEVICE_MMC2, "MMC" }, 215 { BOOT_DEVICE_MMC2_2, "MMC" }, 216 #endif 217 #ifdef CONFIG_SPL_NAND_SUPPORT 218 { BOOT_DEVICE_NAND, "NAND" }, 219 #endif 220 #ifdef CONFIG_SPL_ONENAND_SUPPORT 221 { BOOT_DEVICE_ONENAND, "OneNAND" }, 222 #endif 223 #ifdef CONFIG_SPL_NOR_SUPPORT 224 { BOOT_DEVICE_NOR, "NOR" }, 225 #endif 226 #ifdef CONFIG_SPL_YMODEM_SUPPORT 227 { BOOT_DEVICE_UART, "UART" }, 228 #endif 229 #ifdef CONFIG_SPL_SPI_SUPPORT 230 { BOOT_DEVICE_SPI, "SPI" }, 231 #endif 232 #ifdef CONFIG_SPL_ETH_SUPPORT 233 #ifdef CONFIG_SPL_ETH_DEVICE 234 { BOOT_DEVICE_CPGMAC, "eth device" }, 235 #else 236 { BOOT_DEVICE_CPGMAC, "net" }, 237 #endif 238 #endif 239 #ifdef CONFIG_SPL_USBETH_SUPPORT 240 { BOOT_DEVICE_USBETH, "USB eth" }, 241 #endif 242 #ifdef CONFIG_SPL_USB_SUPPORT 243 { BOOT_DEVICE_USB, "USB" }, 244 #endif 245 #ifdef CONFIG_SPL_SATA_SUPPORT 246 { BOOT_DEVICE_SATA, "SATA" }, 247 #endif 248 /* Keep this entry last */ 249 { BOOT_DEVICE_NONE, "unknown boot device" }, 250 }; 251 252 static void announce_boot_device(u32 boot_device) 253 { 254 int i; 255 256 puts("Trying to boot from "); 257 258 #ifdef CONFIG_SPL_BOARD_LOAD_IMAGE 259 if (boot_device == BOOT_DEVICE_BOARD) { 260 spl_board_announce_boot_device(); 261 puts("\n"); 262 return; 263 } 264 #endif 265 for (i = 0; i < ARRAY_SIZE(boot_name_table) - 1; i++) { 266 if (boot_name_table[i].boot_dev == boot_device) 267 break; 268 } 269 270 printf("%s\n", boot_name_table[i].name); 271 } 272 #else 273 static inline void announce_boot_device(u32 boot_device) { } 274 #endif 275 276 static int spl_load_image(u32 boot_device) 277 { 278 switch (boot_device) { 279 #ifdef CONFIG_SPL_RAM_DEVICE 280 case BOOT_DEVICE_RAM: 281 return spl_ram_load_image(); 282 #endif 283 #ifdef CONFIG_SPL_MMC_SUPPORT 284 case BOOT_DEVICE_MMC1: 285 case BOOT_DEVICE_MMC2: 286 case BOOT_DEVICE_MMC2_2: 287 return spl_mmc_load_image(boot_device); 288 #endif 289 #ifdef CONFIG_SPL_NAND_SUPPORT 290 case BOOT_DEVICE_NAND: 291 return spl_nand_load_image(); 292 #endif 293 #ifdef CONFIG_SPL_ONENAND_SUPPORT 294 case BOOT_DEVICE_ONENAND: 295 return spl_onenand_load_image(); 296 #endif 297 #ifdef CONFIG_SPL_NOR_SUPPORT 298 case BOOT_DEVICE_NOR: 299 return spl_nor_load_image(); 300 #endif 301 #ifdef CONFIG_SPL_YMODEM_SUPPORT 302 case BOOT_DEVICE_UART: 303 return spl_ymodem_load_image(); 304 #endif 305 #ifdef CONFIG_SPL_SPI_SUPPORT 306 case BOOT_DEVICE_SPI: 307 return spl_spi_load_image(); 308 #endif 309 #ifdef CONFIG_SPL_ETH_SUPPORT 310 case BOOT_DEVICE_CPGMAC: 311 #ifdef CONFIG_SPL_ETH_DEVICE 312 return spl_net_load_image(CONFIG_SPL_ETH_DEVICE); 313 #else 314 return spl_net_load_image(NULL); 315 #endif 316 #endif 317 #ifdef CONFIG_SPL_USBETH_SUPPORT 318 case BOOT_DEVICE_USBETH: 319 return spl_net_load_image("usb_ether"); 320 #endif 321 #ifdef CONFIG_SPL_USB_SUPPORT 322 case BOOT_DEVICE_USB: 323 return spl_usb_load_image(); 324 #endif 325 #ifdef CONFIG_SPL_SATA_SUPPORT 326 case BOOT_DEVICE_SATA: 327 return spl_sata_load_image(); 328 #endif 329 #ifdef CONFIG_SPL_BOARD_LOAD_IMAGE 330 case BOOT_DEVICE_BOARD: 331 return spl_board_load_image(); 332 #endif 333 default: 334 #if defined(CONFIG_SPL_SERIAL_SUPPORT) && defined(CONFIG_SPL_LIBCOMMON_SUPPORT) 335 puts("SPL: Unsupported Boot Device!\n"); 336 #endif 337 return -ENODEV; 338 } 339 340 return -EINVAL; 341 } 342 343 void board_init_r(gd_t *dummy1, ulong dummy2) 344 { 345 int i; 346 347 debug(">>spl:board_init_r()\n"); 348 349 #if defined(CONFIG_SYS_SPL_MALLOC_START) 350 mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START, 351 CONFIG_SYS_SPL_MALLOC_SIZE); 352 gd->flags |= GD_FLG_FULL_MALLOC_INIT; 353 #endif 354 if (!(gd->flags & GD_FLG_SPL_INIT)) { 355 if (spl_init()) 356 hang(); 357 } 358 #ifndef CONFIG_PPC 359 /* 360 * timer_init() does not exist on PPC systems. The timer is initialized 361 * and enabled (decrementer) in interrupt_init() here. 362 */ 363 timer_init(); 364 #endif 365 366 #ifdef CONFIG_SPL_BOARD_INIT 367 spl_board_init(); 368 #endif 369 370 board_boot_order(spl_boot_list); 371 for (i = 0; i < ARRAY_SIZE(spl_boot_list) && 372 spl_boot_list[i] != BOOT_DEVICE_NONE; i++) { 373 announce_boot_device(spl_boot_list[i]); 374 if (!spl_load_image(spl_boot_list[i])) 375 break; 376 } 377 378 if (i == ARRAY_SIZE(spl_boot_list) || 379 spl_boot_list[i] == BOOT_DEVICE_NONE) { 380 puts("SPL: failed to boot from all boot devices\n"); 381 hang(); 382 } 383 384 switch (spl_image.os) { 385 case IH_OS_U_BOOT: 386 debug("Jumping to U-Boot\n"); 387 break; 388 #ifdef CONFIG_SPL_OS_BOOT 389 case IH_OS_LINUX: 390 debug("Jumping to Linux\n"); 391 spl_board_prepare_for_linux(); 392 jump_to_image_linux((void *)CONFIG_SYS_SPL_ARGS_ADDR); 393 #endif 394 default: 395 debug("Unsupported OS image.. Jumping nevertheless..\n"); 396 } 397 #if defined(CONFIG_SYS_MALLOC_F_LEN) && !defined(CONFIG_SYS_SPL_MALLOC_SIZE) 398 debug("SPL malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr, 399 gd->malloc_ptr / 1024); 400 #endif 401 402 debug("loaded - jumping to U-Boot..."); 403 jump_to_image_no_args(&spl_image); 404 } 405 406 /* 407 * This requires UART clocks to be enabled. In order for this to work the 408 * caller must ensure that the gd pointer is valid. 409 */ 410 void preloader_console_init(void) 411 { 412 gd->bd = &bdata; 413 gd->baudrate = CONFIG_BAUDRATE; 414 415 serial_init(); /* serial communications setup */ 416 417 gd->have_console = 1; 418 419 puts("\nU-Boot SPL " PLAIN_VERSION " (" U_BOOT_DATE " - " \ 420 U_BOOT_TIME ")\n"); 421 #ifdef CONFIG_SPL_DISPLAY_PRINT 422 spl_display_print(); 423 #endif 424 } 425 426 /** 427 * spl_relocate_stack_gd() - Relocate stack ready for board_init_r() execution 428 * 429 * Sometimes board_init_f() runs with a stack in SRAM but we want to use SDRAM 430 * for the main board_init_r() execution. This is typically because we need 431 * more stack space for things like the MMC sub-system. 432 * 433 * This function calculates the stack position, copies the global_data into 434 * place and returns the new stack position. The caller is responsible for 435 * setting up the sp register. 436 * 437 * @return new stack location, or 0 to use the same stack 438 */ 439 ulong spl_relocate_stack_gd(void) 440 { 441 #ifdef CONFIG_SPL_STACK_R 442 gd_t *new_gd; 443 ulong ptr; 444 445 /* Get stack position: use 8-byte alignment for ABI compliance */ 446 ptr = CONFIG_SPL_STACK_R_ADDR - sizeof(gd_t); 447 ptr &= ~7; 448 new_gd = (gd_t *)ptr; 449 memcpy(new_gd, (void *)gd, sizeof(gd_t)); 450 gd = new_gd; 451 452 #ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE 453 if (CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN) { 454 if (!(gd->flags & GD_FLG_SPL_INIT)) 455 panic_str("spl_init must be called before heap reloc"); 456 457 ptr -= CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN; 458 gd->malloc_base = ptr; 459 gd->malloc_limit = CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN; 460 gd->malloc_ptr = 0; 461 } 462 #endif 463 464 return ptr; 465 #else 466 return 0; 467 #endif 468 } 469