xref: /openbmc/u-boot/common/miiphyutil.c (revision ac1058fd) 
1 /*
2  * (C) Copyright 2001
3  * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 /*
9  * This provides a bit-banged interface to the ethernet MII management
10  * channel.
11  */
12 
13 #include <common.h>
14 #include <miiphy.h>
15 #include <phy.h>
16 
17 #include <asm/types.h>
18 #include <linux/list.h>
19 #include <malloc.h>
20 #include <net.h>
21 
22 /* local debug macro */
23 #undef MII_DEBUG
24 
25 #undef debug
26 #ifdef MII_DEBUG
27 #define debug(fmt, args...)	printf(fmt, ##args)
28 #else
29 #define debug(fmt, args...)
30 #endif /* MII_DEBUG */
31 
32 static struct list_head mii_devs;
33 static struct mii_dev *current_mii;
34 
35 /*
36  * Lookup the mii_dev struct by the registered device name.
37  */
38 struct mii_dev *miiphy_get_dev_by_name(const char *devname)
39 {
40 	struct list_head *entry;
41 	struct mii_dev *dev;
42 
43 	if (!devname) {
44 		printf("NULL device name!\n");
45 		return NULL;
46 	}
47 
48 	list_for_each(entry, &mii_devs) {
49 		dev = list_entry(entry, struct mii_dev, link);
50 		if (strcmp(dev->name, devname) == 0)
51 			return dev;
52 	}
53 
54 	return NULL;
55 }
56 
57 /*****************************************************************************
58  *
59  * Initialize global data. Need to be called before any other miiphy routine.
60  */
61 void miiphy_init(void)
62 {
63 	INIT_LIST_HEAD(&mii_devs);
64 	current_mii = NULL;
65 }
66 
67 static int legacy_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg)
68 {
69 	unsigned short val;
70 	int ret;
71 	struct legacy_mii_dev *ldev = bus->priv;
72 
73 	ret = ldev->read(bus->name, addr, reg, &val);
74 
75 	return ret ? -1 : (int)val;
76 }
77 
78 static int legacy_miiphy_write(struct mii_dev *bus, int addr, int devad,
79 				int reg, u16 val)
80 {
81 	struct legacy_mii_dev *ldev = bus->priv;
82 
83 	return ldev->write(bus->name, addr, reg, val);
84 }
85 
86 /*****************************************************************************
87  *
88  * Register read and write MII access routines for the device <name>.
89  * This API is now deprecated. Please use mdio_alloc and mdio_register, instead.
90  */
91 void miiphy_register(const char *name,
92 		      int (*read)(const char *devname, unsigned char addr,
93 				   unsigned char reg, unsigned short *value),
94 		      int (*write)(const char *devname, unsigned char addr,
95 				    unsigned char reg, unsigned short value))
96 {
97 	struct mii_dev *new_dev;
98 	struct legacy_mii_dev *ldev;
99 
100 	BUG_ON(strlen(name) >= MDIO_NAME_LEN);
101 
102 	/* check if we have unique name */
103 	new_dev = miiphy_get_dev_by_name(name);
104 	if (new_dev) {
105 		printf("miiphy_register: non unique device name '%s'\n", name);
106 		return;
107 	}
108 
109 	/* allocate memory */
110 	new_dev = mdio_alloc();
111 	ldev = malloc(sizeof(*ldev));
112 
113 	if (new_dev == NULL || ldev == NULL) {
114 		printf("miiphy_register: cannot allocate memory for '%s'\n",
115 			name);
116 		return;
117 	}
118 
119 	/* initalize mii_dev struct fields */
120 	new_dev->read = legacy_miiphy_read;
121 	new_dev->write = legacy_miiphy_write;
122 	strncpy(new_dev->name, name, MDIO_NAME_LEN);
123 	new_dev->name[MDIO_NAME_LEN - 1] = 0;
124 	ldev->read = read;
125 	ldev->write = write;
126 	new_dev->priv = ldev;
127 
128 	debug("miiphy_register: added '%s', read=0x%08lx, write=0x%08lx\n",
129 	       new_dev->name, ldev->read, ldev->write);
130 
131 	/* add it to the list */
132 	list_add_tail(&new_dev->link, &mii_devs);
133 
134 	if (!current_mii)
135 		current_mii = new_dev;
136 }
137 
138 struct mii_dev *mdio_alloc(void)
139 {
140 	struct mii_dev *bus;
141 
142 	bus = malloc(sizeof(*bus));
143 	if (!bus)
144 		return bus;
145 
146 	memset(bus, 0, sizeof(*bus));
147 
148 	/* initalize mii_dev struct fields */
149 	INIT_LIST_HEAD(&bus->link);
150 
151 	return bus;
152 }
153 
154 int mdio_register(struct mii_dev *bus)
155 {
156 	if (!bus || !bus->name || !bus->read || !bus->write)
157 		return -1;
158 
159 	/* check if we have unique name */
160 	if (miiphy_get_dev_by_name(bus->name)) {
161 		printf("mdio_register: non unique device name '%s'\n",
162 			bus->name);
163 		return -1;
164 	}
165 
166 	/* add it to the list */
167 	list_add_tail(&bus->link, &mii_devs);
168 
169 	if (!current_mii)
170 		current_mii = bus;
171 
172 	return 0;
173 }
174 
175 void mdio_list_devices(void)
176 {
177 	struct list_head *entry;
178 
179 	list_for_each(entry, &mii_devs) {
180 		int i;
181 		struct mii_dev *bus = list_entry(entry, struct mii_dev, link);
182 
183 		printf("%s:\n", bus->name);
184 
185 		for (i = 0; i < PHY_MAX_ADDR; i++) {
186 			struct phy_device *phydev = bus->phymap[i];
187 
188 			if (phydev) {
189 				printf("%d - %s", i, phydev->drv->name);
190 
191 				if (phydev->dev)
192 					printf(" <--> %s\n", phydev->dev->name);
193 				else
194 					printf("\n");
195 			}
196 		}
197 	}
198 }
199 
200 int miiphy_set_current_dev(const char *devname)
201 {
202 	struct mii_dev *dev;
203 
204 	dev = miiphy_get_dev_by_name(devname);
205 	if (dev) {
206 		current_mii = dev;
207 		return 0;
208 	}
209 
210 	printf("No such device: %s\n", devname);
211 
212 	return 1;
213 }
214 
215 struct mii_dev *mdio_get_current_dev(void)
216 {
217 	return current_mii;
218 }
219 
220 struct phy_device *mdio_phydev_for_ethname(const char *ethname)
221 {
222 	struct list_head *entry;
223 	struct mii_dev *bus;
224 
225 	list_for_each(entry, &mii_devs) {
226 		int i;
227 		bus = list_entry(entry, struct mii_dev, link);
228 
229 		for (i = 0; i < PHY_MAX_ADDR; i++) {
230 			if (!bus->phymap[i] || !bus->phymap[i]->dev)
231 				continue;
232 
233 			if (strcmp(bus->phymap[i]->dev->name, ethname) == 0)
234 				return bus->phymap[i];
235 		}
236 	}
237 
238 	printf("%s is not a known ethernet\n", ethname);
239 	return NULL;
240 }
241 
242 const char *miiphy_get_current_dev(void)
243 {
244 	if (current_mii)
245 		return current_mii->name;
246 
247 	return NULL;
248 }
249 
250 static struct mii_dev *miiphy_get_active_dev(const char *devname)
251 {
252 	/* If the current mii is the one we want, return it */
253 	if (current_mii)
254 		if (strcmp(current_mii->name, devname) == 0)
255 			return current_mii;
256 
257 	/* Otherwise, set the active one to the one we want */
258 	if (miiphy_set_current_dev(devname))
259 		return NULL;
260 	else
261 		return current_mii;
262 }
263 
264 /*****************************************************************************
265  *
266  * Read to variable <value> from the PHY attached to device <devname>,
267  * use PHY address <addr> and register <reg>.
268  *
269  * This API is deprecated. Use phy_read on a phy_device found via phy_connect
270  *
271  * Returns:
272  *   0 on success
273  */
274 int miiphy_read(const char *devname, unsigned char addr, unsigned char reg,
275 		 unsigned short *value)
276 {
277 	struct mii_dev *bus;
278 	int ret;
279 
280 	bus = miiphy_get_active_dev(devname);
281 	if (!bus)
282 		return 1;
283 
284 	ret = bus->read(bus, addr, MDIO_DEVAD_NONE, reg);
285 	if (ret < 0)
286 		return 1;
287 
288 	*value = (unsigned short)ret;
289 	return 0;
290 }
291 
292 /*****************************************************************************
293  *
294  * Write <value> to the PHY attached to device <devname>,
295  * use PHY address <addr> and register <reg>.
296  *
297  * This API is deprecated. Use phy_write on a phy_device found by phy_connect
298  *
299  * Returns:
300  *   0 on success
301  */
302 int miiphy_write(const char *devname, unsigned char addr, unsigned char reg,
303 		  unsigned short value)
304 {
305 	struct mii_dev *bus;
306 
307 	bus = miiphy_get_active_dev(devname);
308 	if (bus)
309 		return bus->write(bus, addr, MDIO_DEVAD_NONE, reg, value);
310 
311 	return 1;
312 }
313 
314 /*****************************************************************************
315  *
316  * Print out list of registered MII capable devices.
317  */
318 void miiphy_listdev(void)
319 {
320 	struct list_head *entry;
321 	struct mii_dev *dev;
322 
323 	puts("MII devices: ");
324 	list_for_each(entry, &mii_devs) {
325 		dev = list_entry(entry, struct mii_dev, link);
326 		printf("'%s' ", dev->name);
327 	}
328 	puts("\n");
329 
330 	if (current_mii)
331 		printf("Current device: '%s'\n", current_mii->name);
332 }
333 
334 /*****************************************************************************
335  *
336  * Read the OUI, manufacture's model number, and revision number.
337  *
338  * OUI:     22 bits (unsigned int)
339  * Model:    6 bits (unsigned char)
340  * Revision: 4 bits (unsigned char)
341  *
342  * This API is deprecated.
343  *
344  * Returns:
345  *   0 on success
346  */
347 int miiphy_info(const char *devname, unsigned char addr, unsigned int *oui,
348 		 unsigned char *model, unsigned char *rev)
349 {
350 	unsigned int reg = 0;
351 	unsigned short tmp;
352 
353 	if (miiphy_read(devname, addr, MII_PHYSID2, &tmp) != 0) {
354 		debug("PHY ID register 2 read failed\n");
355 		return -1;
356 	}
357 	reg = tmp;
358 
359 	debug("MII_PHYSID2 @ 0x%x = 0x%04x\n", addr, reg);
360 
361 	if (reg == 0xFFFF) {
362 		/* No physical device present at this address */
363 		return -1;
364 	}
365 
366 	if (miiphy_read(devname, addr, MII_PHYSID1, &tmp) != 0) {
367 		debug("PHY ID register 1 read failed\n");
368 		return -1;
369 	}
370 	reg |= tmp << 16;
371 	debug("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg);
372 
373 	*oui = (reg >> 10);
374 	*model = (unsigned char)((reg >> 4) & 0x0000003F);
375 	*rev = (unsigned char)(reg & 0x0000000F);
376 	return 0;
377 }
378 
379 #ifndef CONFIG_PHYLIB
380 /*****************************************************************************
381  *
382  * Reset the PHY.
383  *
384  * This API is deprecated. Use PHYLIB.
385  *
386  * Returns:
387  *   0 on success
388  */
389 int miiphy_reset(const char *devname, unsigned char addr)
390 {
391 	unsigned short reg;
392 	int timeout = 500;
393 
394 	if (miiphy_read(devname, addr, MII_BMCR, &reg) != 0) {
395 		debug("PHY status read failed\n");
396 		return -1;
397 	}
398 	if (miiphy_write(devname, addr, MII_BMCR, reg | BMCR_RESET) != 0) {
399 		debug("PHY reset failed\n");
400 		return -1;
401 	}
402 #ifdef CONFIG_PHY_RESET_DELAY
403 	udelay(CONFIG_PHY_RESET_DELAY);	/* Intel LXT971A needs this */
404 #endif
405 	/*
406 	 * Poll the control register for the reset bit to go to 0 (it is
407 	 * auto-clearing).  This should happen within 0.5 seconds per the
408 	 * IEEE spec.
409 	 */
410 	reg = 0x8000;
411 	while (((reg & 0x8000) != 0) && timeout--) {
412 		if (miiphy_read(devname, addr, MII_BMCR, &reg) != 0) {
413 			debug("PHY status read failed\n");
414 			return -1;
415 		}
416 		udelay(1000);
417 	}
418 	if ((reg & 0x8000) == 0) {
419 		return 0;
420 	} else {
421 		puts("PHY reset timed out\n");
422 		return -1;
423 	}
424 	return 0;
425 }
426 #endif /* !PHYLIB */
427 
428 /*****************************************************************************
429  *
430  * Determine the ethernet speed (10/100/1000).  Return 10 on error.
431  */
432 int miiphy_speed(const char *devname, unsigned char addr)
433 {
434 	u16 bmcr, anlpar;
435 
436 #if defined(CONFIG_PHY_GIGE)
437 	u16 btsr;
438 
439 	/*
440 	 * Check for 1000BASE-X.  If it is supported, then assume that the speed
441 	 * is 1000.
442 	 */
443 	if (miiphy_is_1000base_x(devname, addr))
444 		return _1000BASET;
445 
446 	/*
447 	 * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
448 	 */
449 	/* Check for 1000BASE-T. */
450 	if (miiphy_read(devname, addr, MII_STAT1000, &btsr)) {
451 		printf("PHY 1000BT status");
452 		goto miiphy_read_failed;
453 	}
454 	if (btsr != 0xFFFF &&
455 			(btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)))
456 		return _1000BASET;
457 #endif /* CONFIG_PHY_GIGE */
458 
459 	/* Check Basic Management Control Register first. */
460 	if (miiphy_read(devname, addr, MII_BMCR, &bmcr)) {
461 		printf("PHY speed");
462 		goto miiphy_read_failed;
463 	}
464 	/* Check if auto-negotiation is on. */
465 	if (bmcr & BMCR_ANENABLE) {
466 		/* Get auto-negotiation results. */
467 		if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
468 			printf("PHY AN speed");
469 			goto miiphy_read_failed;
470 		}
471 		return (anlpar & LPA_100) ? _100BASET : _10BASET;
472 	}
473 	/* Get speed from basic control settings. */
474 	return (bmcr & BMCR_SPEED100) ? _100BASET : _10BASET;
475 
476 miiphy_read_failed:
477 	printf(" read failed, assuming 10BASE-T\n");
478 	return _10BASET;
479 }
480 
481 /*****************************************************************************
482  *
483  * Determine full/half duplex.  Return half on error.
484  */
485 int miiphy_duplex(const char *devname, unsigned char addr)
486 {
487 	u16 bmcr, anlpar;
488 
489 #if defined(CONFIG_PHY_GIGE)
490 	u16 btsr;
491 
492 	/* Check for 1000BASE-X. */
493 	if (miiphy_is_1000base_x(devname, addr)) {
494 		/* 1000BASE-X */
495 		if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
496 			printf("1000BASE-X PHY AN duplex");
497 			goto miiphy_read_failed;
498 		}
499 	}
500 	/*
501 	 * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
502 	 */
503 	/* Check for 1000BASE-T. */
504 	if (miiphy_read(devname, addr, MII_STAT1000, &btsr)) {
505 		printf("PHY 1000BT status");
506 		goto miiphy_read_failed;
507 	}
508 	if (btsr != 0xFFFF) {
509 		if (btsr & PHY_1000BTSR_1000FD) {
510 			return FULL;
511 		} else if (btsr & PHY_1000BTSR_1000HD) {
512 			return HALF;
513 		}
514 	}
515 #endif /* CONFIG_PHY_GIGE */
516 
517 	/* Check Basic Management Control Register first. */
518 	if (miiphy_read(devname, addr, MII_BMCR, &bmcr)) {
519 		puts("PHY duplex");
520 		goto miiphy_read_failed;
521 	}
522 	/* Check if auto-negotiation is on. */
523 	if (bmcr & BMCR_ANENABLE) {
524 		/* Get auto-negotiation results. */
525 		if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
526 			puts("PHY AN duplex");
527 			goto miiphy_read_failed;
528 		}
529 		return (anlpar & (LPA_10FULL | LPA_100FULL)) ?
530 		    FULL : HALF;
531 	}
532 	/* Get speed from basic control settings. */
533 	return (bmcr & BMCR_FULLDPLX) ? FULL : HALF;
534 
535 miiphy_read_failed:
536 	printf(" read failed, assuming half duplex\n");
537 	return HALF;
538 }
539 
540 /*****************************************************************************
541  *
542  * Return 1 if PHY supports 1000BASE-X, 0 if PHY supports 10BASE-T/100BASE-TX/
543  * 1000BASE-T, or on error.
544  */
545 int miiphy_is_1000base_x(const char *devname, unsigned char addr)
546 {
547 #if defined(CONFIG_PHY_GIGE)
548 	u16 exsr;
549 
550 	if (miiphy_read(devname, addr, MII_ESTATUS, &exsr)) {
551 		printf("PHY extended status read failed, assuming no "
552 			"1000BASE-X\n");
553 		return 0;
554 	}
555 	return 0 != (exsr & (ESTATUS_1000XF | ESTATUS_1000XH));
556 #else
557 	return 0;
558 #endif
559 }
560 
561 #ifdef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
562 /*****************************************************************************
563  *
564  * Determine link status
565  */
566 int miiphy_link(const char *devname, unsigned char addr)
567 {
568 	unsigned short reg;
569 
570 	/* dummy read; needed to latch some phys */
571 	(void)miiphy_read(devname, addr, MII_BMSR, &reg);
572 	if (miiphy_read(devname, addr, MII_BMSR, &reg)) {
573 		puts("MII_BMSR read failed, assuming no link\n");
574 		return 0;
575 	}
576 
577 	/* Determine if a link is active */
578 	if ((reg & BMSR_LSTATUS) != 0) {
579 		return 1;
580 	} else {
581 		return 0;
582 	}
583 }
584 #endif
585