xref: /openbmc/u-boot/common/miiphyutil.c (revision 2f6ed3b8) 
1 /*
2  * (C) Copyright 2001
3  * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 /*
9  * This provides a bit-banged interface to the ethernet MII management
10  * channel.
11  */
12 
13 #include <common.h>
14 #include <dm.h>
15 #include <miiphy.h>
16 #include <phy.h>
17 
18 #include <asm/types.h>
19 #include <linux/list.h>
20 #include <malloc.h>
21 #include <net.h>
22 
23 /* local debug macro */
24 #undef MII_DEBUG
25 
26 #undef debug
27 #ifdef MII_DEBUG
28 #define debug(fmt, args...)	printf(fmt, ##args)
29 #else
30 #define debug(fmt, args...)
31 #endif /* MII_DEBUG */
32 
33 static struct list_head mii_devs;
34 static struct mii_dev *current_mii;
35 
36 /*
37  * Lookup the mii_dev struct by the registered device name.
38  */
39 struct mii_dev *miiphy_get_dev_by_name(const char *devname)
40 {
41 	struct list_head *entry;
42 	struct mii_dev *dev;
43 
44 	if (!devname) {
45 		printf("NULL device name!\n");
46 		return NULL;
47 	}
48 
49 	list_for_each(entry, &mii_devs) {
50 		dev = list_entry(entry, struct mii_dev, link);
51 		if (strcmp(dev->name, devname) == 0)
52 			return dev;
53 	}
54 
55 	return NULL;
56 }
57 
58 /*****************************************************************************
59  *
60  * Initialize global data. Need to be called before any other miiphy routine.
61  */
62 void miiphy_init(void)
63 {
64 	INIT_LIST_HEAD(&mii_devs);
65 	current_mii = NULL;
66 }
67 
68 static int legacy_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg)
69 {
70 	unsigned short val;
71 	int ret;
72 	struct legacy_mii_dev *ldev = bus->priv;
73 
74 	ret = ldev->read(bus->name, addr, reg, &val);
75 
76 	return ret ? -1 : (int)val;
77 }
78 
79 static int legacy_miiphy_write(struct mii_dev *bus, int addr, int devad,
80 				int reg, u16 val)
81 {
82 	struct legacy_mii_dev *ldev = bus->priv;
83 
84 	return ldev->write(bus->name, addr, reg, val);
85 }
86 
87 /*****************************************************************************
88  *
89  * Register read and write MII access routines for the device <name>.
90  * This API is now deprecated. Please use mdio_alloc and mdio_register, instead.
91  */
92 void miiphy_register(const char *name,
93 		      int (*read)(const char *devname, unsigned char addr,
94 				   unsigned char reg, unsigned short *value),
95 		      int (*write)(const char *devname, unsigned char addr,
96 				    unsigned char reg, unsigned short value))
97 {
98 	struct mii_dev *new_dev;
99 	struct legacy_mii_dev *ldev;
100 
101 	BUG_ON(strlen(name) >= MDIO_NAME_LEN);
102 
103 	/* check if we have unique name */
104 	new_dev = miiphy_get_dev_by_name(name);
105 	if (new_dev) {
106 		printf("miiphy_register: non unique device name '%s'\n", name);
107 		return;
108 	}
109 
110 	/* allocate memory */
111 	new_dev = mdio_alloc();
112 	ldev = malloc(sizeof(*ldev));
113 
114 	if (new_dev == NULL || ldev == NULL) {
115 		printf("miiphy_register: cannot allocate memory for '%s'\n",
116 			name);
117 		free(ldev);
118 		mdio_free(new_dev);
119 		return;
120 	}
121 
122 	/* initalize mii_dev struct fields */
123 	new_dev->read = legacy_miiphy_read;
124 	new_dev->write = legacy_miiphy_write;
125 	strncpy(new_dev->name, name, MDIO_NAME_LEN);
126 	new_dev->name[MDIO_NAME_LEN - 1] = 0;
127 	ldev->read = read;
128 	ldev->write = write;
129 	new_dev->priv = ldev;
130 
131 	debug("miiphy_register: added '%s', read=0x%08lx, write=0x%08lx\n",
132 	       new_dev->name, ldev->read, ldev->write);
133 
134 	/* add it to the list */
135 	list_add_tail(&new_dev->link, &mii_devs);
136 
137 	if (!current_mii)
138 		current_mii = new_dev;
139 }
140 
141 struct mii_dev *mdio_alloc(void)
142 {
143 	struct mii_dev *bus;
144 
145 	bus = malloc(sizeof(*bus));
146 	if (!bus)
147 		return bus;
148 
149 	memset(bus, 0, sizeof(*bus));
150 
151 	/* initalize mii_dev struct fields */
152 	INIT_LIST_HEAD(&bus->link);
153 
154 	return bus;
155 }
156 
157 void mdio_free(struct mii_dev *bus)
158 {
159 	free(bus);
160 }
161 
162 int mdio_register(struct mii_dev *bus)
163 {
164 	if (!bus || !bus->read || !bus->write)
165 		return -1;
166 
167 	/* check if we have unique name */
168 	if (miiphy_get_dev_by_name(bus->name)) {
169 		printf("mdio_register: non unique device name '%s'\n",
170 			bus->name);
171 		return -1;
172 	}
173 
174 	/* add it to the list */
175 	list_add_tail(&bus->link, &mii_devs);
176 
177 	if (!current_mii)
178 		current_mii = bus;
179 
180 	return 0;
181 }
182 
183 int mdio_unregister(struct mii_dev *bus)
184 {
185 	if (!bus)
186 		return 0;
187 
188 	/* delete it from the list */
189 	list_del(&bus->link);
190 
191 	if (current_mii == bus)
192 		current_mii = NULL;
193 
194 	return 0;
195 }
196 
197 void mdio_list_devices(void)
198 {
199 	struct list_head *entry;
200 
201 	list_for_each(entry, &mii_devs) {
202 		int i;
203 		struct mii_dev *bus = list_entry(entry, struct mii_dev, link);
204 
205 		printf("%s:\n", bus->name);
206 
207 		for (i = 0; i < PHY_MAX_ADDR; i++) {
208 			struct phy_device *phydev = bus->phymap[i];
209 
210 			if (phydev) {
211 				printf("%d - %s", i, phydev->drv->name);
212 
213 				if (phydev->dev)
214 					printf(" <--> %s\n", phydev->dev->name);
215 				else
216 					printf("\n");
217 			}
218 		}
219 	}
220 }
221 
222 int miiphy_set_current_dev(const char *devname)
223 {
224 	struct mii_dev *dev;
225 
226 	dev = miiphy_get_dev_by_name(devname);
227 	if (dev) {
228 		current_mii = dev;
229 		return 0;
230 	}
231 
232 	printf("No such device: %s\n", devname);
233 
234 	return 1;
235 }
236 
237 struct mii_dev *mdio_get_current_dev(void)
238 {
239 	return current_mii;
240 }
241 
242 struct phy_device *mdio_phydev_for_ethname(const char *ethname)
243 {
244 	struct list_head *entry;
245 	struct mii_dev *bus;
246 
247 	list_for_each(entry, &mii_devs) {
248 		int i;
249 		bus = list_entry(entry, struct mii_dev, link);
250 
251 		for (i = 0; i < PHY_MAX_ADDR; i++) {
252 			if (!bus->phymap[i] || !bus->phymap[i]->dev)
253 				continue;
254 
255 			if (strcmp(bus->phymap[i]->dev->name, ethname) == 0)
256 				return bus->phymap[i];
257 		}
258 	}
259 
260 	printf("%s is not a known ethernet\n", ethname);
261 	return NULL;
262 }
263 
264 const char *miiphy_get_current_dev(void)
265 {
266 	if (current_mii)
267 		return current_mii->name;
268 
269 	return NULL;
270 }
271 
272 static struct mii_dev *miiphy_get_active_dev(const char *devname)
273 {
274 	/* If the current mii is the one we want, return it */
275 	if (current_mii)
276 		if (strcmp(current_mii->name, devname) == 0)
277 			return current_mii;
278 
279 	/* Otherwise, set the active one to the one we want */
280 	if (miiphy_set_current_dev(devname))
281 		return NULL;
282 	else
283 		return current_mii;
284 }
285 
286 /*****************************************************************************
287  *
288  * Read to variable <value> from the PHY attached to device <devname>,
289  * use PHY address <addr> and register <reg>.
290  *
291  * This API is deprecated. Use phy_read on a phy_device found via phy_connect
292  *
293  * Returns:
294  *   0 on success
295  */
296 int miiphy_read(const char *devname, unsigned char addr, unsigned char reg,
297 		 unsigned short *value)
298 {
299 	struct mii_dev *bus;
300 	int ret;
301 
302 	bus = miiphy_get_active_dev(devname);
303 	if (!bus)
304 		return 1;
305 
306 	ret = bus->read(bus, addr, MDIO_DEVAD_NONE, reg);
307 	if (ret < 0)
308 		return 1;
309 
310 	*value = (unsigned short)ret;
311 	return 0;
312 }
313 
314 /*****************************************************************************
315  *
316  * Write <value> to the PHY attached to device <devname>,
317  * use PHY address <addr> and register <reg>.
318  *
319  * This API is deprecated. Use phy_write on a phy_device found by phy_connect
320  *
321  * Returns:
322  *   0 on success
323  */
324 int miiphy_write(const char *devname, unsigned char addr, unsigned char reg,
325 		  unsigned short value)
326 {
327 	struct mii_dev *bus;
328 
329 	bus = miiphy_get_active_dev(devname);
330 	if (bus)
331 		return bus->write(bus, addr, MDIO_DEVAD_NONE, reg, value);
332 
333 	return 1;
334 }
335 
336 /*****************************************************************************
337  *
338  * Print out list of registered MII capable devices.
339  */
340 void miiphy_listdev(void)
341 {
342 	struct list_head *entry;
343 	struct mii_dev *dev;
344 
345 	puts("MII devices: ");
346 	list_for_each(entry, &mii_devs) {
347 		dev = list_entry(entry, struct mii_dev, link);
348 		printf("'%s' ", dev->name);
349 	}
350 	puts("\n");
351 
352 	if (current_mii)
353 		printf("Current device: '%s'\n", current_mii->name);
354 }
355 
356 /*****************************************************************************
357  *
358  * Read the OUI, manufacture's model number, and revision number.
359  *
360  * OUI:     22 bits (unsigned int)
361  * Model:    6 bits (unsigned char)
362  * Revision: 4 bits (unsigned char)
363  *
364  * This API is deprecated.
365  *
366  * Returns:
367  *   0 on success
368  */
369 int miiphy_info(const char *devname, unsigned char addr, unsigned int *oui,
370 		 unsigned char *model, unsigned char *rev)
371 {
372 	unsigned int reg = 0;
373 	unsigned short tmp;
374 
375 	if (miiphy_read(devname, addr, MII_PHYSID2, &tmp) != 0) {
376 		debug("PHY ID register 2 read failed\n");
377 		return -1;
378 	}
379 	reg = tmp;
380 
381 	debug("MII_PHYSID2 @ 0x%x = 0x%04x\n", addr, reg);
382 
383 	if (reg == 0xFFFF) {
384 		/* No physical device present at this address */
385 		return -1;
386 	}
387 
388 	if (miiphy_read(devname, addr, MII_PHYSID1, &tmp) != 0) {
389 		debug("PHY ID register 1 read failed\n");
390 		return -1;
391 	}
392 	reg |= tmp << 16;
393 	debug("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg);
394 
395 	*oui = (reg >> 10);
396 	*model = (unsigned char)((reg >> 4) & 0x0000003F);
397 	*rev = (unsigned char)(reg & 0x0000000F);
398 	return 0;
399 }
400 
401 #ifndef CONFIG_PHYLIB
402 /*****************************************************************************
403  *
404  * Reset the PHY.
405  *
406  * This API is deprecated. Use PHYLIB.
407  *
408  * Returns:
409  *   0 on success
410  */
411 int miiphy_reset(const char *devname, unsigned char addr)
412 {
413 	unsigned short reg;
414 	int timeout = 500;
415 
416 	if (miiphy_read(devname, addr, MII_BMCR, &reg) != 0) {
417 		debug("PHY status read failed\n");
418 		return -1;
419 	}
420 	if (miiphy_write(devname, addr, MII_BMCR, reg | BMCR_RESET) != 0) {
421 		debug("PHY reset failed\n");
422 		return -1;
423 	}
424 #ifdef CONFIG_PHY_RESET_DELAY
425 	udelay(CONFIG_PHY_RESET_DELAY);	/* Intel LXT971A needs this */
426 #endif
427 	/*
428 	 * Poll the control register for the reset bit to go to 0 (it is
429 	 * auto-clearing).  This should happen within 0.5 seconds per the
430 	 * IEEE spec.
431 	 */
432 	reg = 0x8000;
433 	while (((reg & 0x8000) != 0) && timeout--) {
434 		if (miiphy_read(devname, addr, MII_BMCR, &reg) != 0) {
435 			debug("PHY status read failed\n");
436 			return -1;
437 		}
438 		udelay(1000);
439 	}
440 	if ((reg & 0x8000) == 0) {
441 		return 0;
442 	} else {
443 		puts("PHY reset timed out\n");
444 		return -1;
445 	}
446 	return 0;
447 }
448 #endif /* !PHYLIB */
449 
450 /*****************************************************************************
451  *
452  * Determine the ethernet speed (10/100/1000).  Return 10 on error.
453  */
454 int miiphy_speed(const char *devname, unsigned char addr)
455 {
456 	u16 bmcr, anlpar;
457 
458 #if defined(CONFIG_PHY_GIGE)
459 	u16 btsr;
460 
461 	/*
462 	 * Check for 1000BASE-X.  If it is supported, then assume that the speed
463 	 * is 1000.
464 	 */
465 	if (miiphy_is_1000base_x(devname, addr))
466 		return _1000BASET;
467 
468 	/*
469 	 * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
470 	 */
471 	/* Check for 1000BASE-T. */
472 	if (miiphy_read(devname, addr, MII_STAT1000, &btsr)) {
473 		printf("PHY 1000BT status");
474 		goto miiphy_read_failed;
475 	}
476 	if (btsr != 0xFFFF &&
477 			(btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)))
478 		return _1000BASET;
479 #endif /* CONFIG_PHY_GIGE */
480 
481 	/* Check Basic Management Control Register first. */
482 	if (miiphy_read(devname, addr, MII_BMCR, &bmcr)) {
483 		printf("PHY speed");
484 		goto miiphy_read_failed;
485 	}
486 	/* Check if auto-negotiation is on. */
487 	if (bmcr & BMCR_ANENABLE) {
488 		/* Get auto-negotiation results. */
489 		if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
490 			printf("PHY AN speed");
491 			goto miiphy_read_failed;
492 		}
493 		return (anlpar & LPA_100) ? _100BASET : _10BASET;
494 	}
495 	/* Get speed from basic control settings. */
496 	return (bmcr & BMCR_SPEED100) ? _100BASET : _10BASET;
497 
498 miiphy_read_failed:
499 	printf(" read failed, assuming 10BASE-T\n");
500 	return _10BASET;
501 }
502 
503 /*****************************************************************************
504  *
505  * Determine full/half duplex.  Return half on error.
506  */
507 int miiphy_duplex(const char *devname, unsigned char addr)
508 {
509 	u16 bmcr, anlpar;
510 
511 #if defined(CONFIG_PHY_GIGE)
512 	u16 btsr;
513 
514 	/* Check for 1000BASE-X. */
515 	if (miiphy_is_1000base_x(devname, addr)) {
516 		/* 1000BASE-X */
517 		if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
518 			printf("1000BASE-X PHY AN duplex");
519 			goto miiphy_read_failed;
520 		}
521 	}
522 	/*
523 	 * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
524 	 */
525 	/* Check for 1000BASE-T. */
526 	if (miiphy_read(devname, addr, MII_STAT1000, &btsr)) {
527 		printf("PHY 1000BT status");
528 		goto miiphy_read_failed;
529 	}
530 	if (btsr != 0xFFFF) {
531 		if (btsr & PHY_1000BTSR_1000FD) {
532 			return FULL;
533 		} else if (btsr & PHY_1000BTSR_1000HD) {
534 			return HALF;
535 		}
536 	}
537 #endif /* CONFIG_PHY_GIGE */
538 
539 	/* Check Basic Management Control Register first. */
540 	if (miiphy_read(devname, addr, MII_BMCR, &bmcr)) {
541 		puts("PHY duplex");
542 		goto miiphy_read_failed;
543 	}
544 	/* Check if auto-negotiation is on. */
545 	if (bmcr & BMCR_ANENABLE) {
546 		/* Get auto-negotiation results. */
547 		if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
548 			puts("PHY AN duplex");
549 			goto miiphy_read_failed;
550 		}
551 		return (anlpar & (LPA_10FULL | LPA_100FULL)) ?
552 		    FULL : HALF;
553 	}
554 	/* Get speed from basic control settings. */
555 	return (bmcr & BMCR_FULLDPLX) ? FULL : HALF;
556 
557 miiphy_read_failed:
558 	printf(" read failed, assuming half duplex\n");
559 	return HALF;
560 }
561 
562 /*****************************************************************************
563  *
564  * Return 1 if PHY supports 1000BASE-X, 0 if PHY supports 10BASE-T/100BASE-TX/
565  * 1000BASE-T, or on error.
566  */
567 int miiphy_is_1000base_x(const char *devname, unsigned char addr)
568 {
569 #if defined(CONFIG_PHY_GIGE)
570 	u16 exsr;
571 
572 	if (miiphy_read(devname, addr, MII_ESTATUS, &exsr)) {
573 		printf("PHY extended status read failed, assuming no "
574 			"1000BASE-X\n");
575 		return 0;
576 	}
577 	return 0 != (exsr & (ESTATUS_1000XF | ESTATUS_1000XH));
578 #else
579 	return 0;
580 #endif
581 }
582 
583 #ifdef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
584 /*****************************************************************************
585  *
586  * Determine link status
587  */
588 int miiphy_link(const char *devname, unsigned char addr)
589 {
590 	unsigned short reg;
591 
592 	/* dummy read; needed to latch some phys */
593 	(void)miiphy_read(devname, addr, MII_BMSR, &reg);
594 	if (miiphy_read(devname, addr, MII_BMSR, &reg)) {
595 		puts("MII_BMSR read failed, assuming no link\n");
596 		return 0;
597 	}
598 
599 	/* Determine if a link is active */
600 	if ((reg & BMSR_LSTATUS) != 0) {
601 		return 1;
602 	} else {
603 		return 0;
604 	}
605 }
606 #endif
607