xref: /openbmc/u-boot/common/memsize.c (revision 9c0e2f6e)
1 /*
2  * (C) Copyright 2004
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #include <common.h>
9 
10 DECLARE_GLOBAL_DATA_PTR;
11 
12 #ifdef __PPC__
13 /*
14  * At least on G2 PowerPC cores, sequential accesses to non-existent
15  * memory must be synchronized.
16  */
17 # include <asm/io.h>	/* for sync() */
18 #else
19 # define sync()		/* nothing */
20 #endif
21 
22 /*
23  * Check memory range for valid RAM. A simple memory test determines
24  * the actually available RAM size between addresses `base' and
25  * `base + maxsize'.
26  */
27 long get_ram_size(long *base, long maxsize)
28 {
29 	volatile long *addr;
30 	long           save[31];
31 	long           save_base;
32 	long           cnt;
33 	long           val;
34 	long           size;
35 	int            i = 0;
36 
37 	for (cnt = (maxsize / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) {
38 		addr = base + cnt;	/* pointer arith! */
39 		sync();
40 		save[i++] = *addr;
41 		sync();
42 		*addr = ~cnt;
43 	}
44 
45 	addr = base;
46 	sync();
47 	save_base = *addr;
48 	sync();
49 	*addr = 0;
50 
51 	sync();
52 	if ((val = *addr) != 0) {
53 		/* Restore the original data before leaving the function. */
54 		sync();
55 		*base = save_base;
56 		for (cnt = 1; cnt < maxsize / sizeof(long); cnt <<= 1) {
57 			addr  = base + cnt;
58 			sync();
59 			*addr = save[--i];
60 		}
61 		return (0);
62 	}
63 
64 	for (cnt = 1; cnt < maxsize / sizeof(long); cnt <<= 1) {
65 		addr = base + cnt;	/* pointer arith! */
66 		val = *addr;
67 		*addr = save[--i];
68 		if (val != ~cnt) {
69 			size = cnt * sizeof(long);
70 			/*
71 			 * Restore the original data
72 			 * before leaving the function.
73 			 */
74 			for (cnt <<= 1;
75 			     cnt < maxsize / sizeof(long);
76 			     cnt <<= 1) {
77 				addr  = base + cnt;
78 				*addr = save[--i];
79 			}
80 			/* warning: don't restore save_base in this case,
81 			 * it is already done in the loop because
82 			 * base and base+size share the same physical memory
83 			 * and *base is saved after *(base+size) modification
84 			 * in first loop
85 			 */
86 			return (size);
87 		}
88 	}
89 	*base = save_base;
90 
91 	return (maxsize);
92 }
93 
94 phys_size_t __weak get_effective_memsize(void)
95 {
96 #ifndef CONFIG_VERY_BIG_RAM
97 	return gd->ram_size;
98 #else
99 	/* limit stack to what we can reasonable map */
100 	return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
101 		CONFIG_MAX_MEM_MAPPED : gd->ram_size);
102 #endif
103 }
104