xref: /openbmc/u-boot/common/memsize.c (revision 7b384eccc785b596f68448b155cbda26df57fb23)
1  // SPDX-License-Identifier: GPL-2.0+
2  /*
3   * (C) Copyright 2004
4   * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5   */
6  
7  #include <common.h>
8  
9  DECLARE_GLOBAL_DATA_PTR;
10  
11  #ifdef __PPC__
12  /*
13   * At least on G2 PowerPC cores, sequential accesses to non-existent
14   * memory must be synchronized.
15   */
16  # include <asm/io.h>	/* for sync() */
17  #else
18  # define sync()		/* nothing */
19  #endif
20  
21  /*
22   * Check memory range for valid RAM. A simple memory test determines
23   * the actually available RAM size between addresses `base' and
24   * `base + maxsize'.
25   */
26  long get_ram_size(long *base, long maxsize)
27  {
28  	volatile long *addr;
29  	long           save[BITS_PER_LONG - 1];
30  	long           save_base;
31  	long           cnt;
32  	long           val;
33  	long           size;
34  	int            i = 0;
35  
36  	for (cnt = (maxsize / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) {
37  		addr = base + cnt;	/* pointer arith! */
38  		sync();
39  		save[i++] = *addr;
40  		sync();
41  		*addr = ~cnt;
42  	}
43  
44  	addr = base;
45  	sync();
46  	save_base = *addr;
47  	sync();
48  	*addr = 0;
49  
50  	sync();
51  	if ((val = *addr) != 0) {
52  		/* Restore the original data before leaving the function. */
53  		sync();
54  		*base = save_base;
55  		for (cnt = 1; cnt < maxsize / sizeof(long); cnt <<= 1) {
56  			addr  = base + cnt;
57  			sync();
58  			*addr = save[--i];
59  		}
60  		return (0);
61  	}
62  
63  	for (cnt = 1; cnt < maxsize / sizeof(long); cnt <<= 1) {
64  		addr = base + cnt;	/* pointer arith! */
65  		val = *addr;
66  		*addr = save[--i];
67  		if (val != ~cnt) {
68  			size = cnt * sizeof(long);
69  			/*
70  			 * Restore the original data
71  			 * before leaving the function.
72  			 */
73  			for (cnt <<= 1;
74  			     cnt < maxsize / sizeof(long);
75  			     cnt <<= 1) {
76  				addr  = base + cnt;
77  				*addr = save[--i];
78  			}
79  			/* warning: don't restore save_base in this case,
80  			 * it is already done in the loop because
81  			 * base and base+size share the same physical memory
82  			 * and *base is saved after *(base+size) modification
83  			 * in first loop
84  			 */
85  			return (size);
86  		}
87  	}
88  	*base = save_base;
89  
90  	return (maxsize);
91  }
92  
93  phys_size_t __weak get_effective_memsize(void)
94  {
95  #ifndef CONFIG_VERY_BIG_RAM
96  	return gd->ram_size;
97  #else
98  	/* limit stack to what we can reasonable map */
99  	return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
100  		CONFIG_MAX_MEM_MAPPED : gd->ram_size);
101  #endif
102  }
103