1 /* 2 * (C) Copyright 2000 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * Add to readline cmdline-editing by 6 * (C) Copyright 2005 7 * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com> 8 * 9 * See file CREDITS for list of people who contributed to this 10 * project. 11 * 12 * This program is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License as 14 * published by the Free Software Foundation; either version 2 of 15 * the License, or (at your option) any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; if not, write to the Free Software 24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 25 * MA 02111-1307 USA 26 */ 27 28 /* #define DEBUG */ 29 30 #include <common.h> 31 #include <watchdog.h> 32 #include <command.h> 33 #include <malloc.h> 34 #include <version.h> 35 #ifdef CONFIG_MODEM_SUPPORT 36 #include <malloc.h> /* for free() prototype */ 37 #endif 38 39 #ifdef CONFIG_SYS_HUSH_PARSER 40 #include <hush.h> 41 #endif 42 43 #include <post.h> 44 #include <linux/ctype.h> 45 #include <menu.h> 46 47 #if defined(CONFIG_SILENT_CONSOLE) || defined(CONFIG_POST) || defined(CONFIG_CMDLINE_EDITING) 48 DECLARE_GLOBAL_DATA_PTR; 49 #endif 50 51 /* 52 * Board-specific Platform code can reimplement show_boot_progress () if needed 53 */ 54 void inline __show_boot_progress (int val) {} 55 void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress"))); 56 57 #if defined(CONFIG_UPDATE_TFTP) 58 int update_tftp (ulong addr); 59 #endif /* CONFIG_UPDATE_TFTP */ 60 61 #define MAX_DELAY_STOP_STR 32 62 63 #undef DEBUG_PARSER 64 65 char console_buffer[CONFIG_SYS_CBSIZE + 1]; /* console I/O buffer */ 66 67 static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen); 68 static const char erase_seq[] = "\b \b"; /* erase sequence */ 69 static const char tab_seq[] = " "; /* used to expand TABs */ 70 71 #ifdef CONFIG_BOOT_RETRY_TIME 72 static uint64_t endtime = 0; /* must be set, default is instant timeout */ 73 static int retry_time = -1; /* -1 so can call readline before main_loop */ 74 #endif 75 76 #define endtick(seconds) (get_ticks() + (uint64_t)(seconds) * get_tbclk()) 77 78 #ifndef CONFIG_BOOT_RETRY_MIN 79 #define CONFIG_BOOT_RETRY_MIN CONFIG_BOOT_RETRY_TIME 80 #endif 81 82 #ifdef CONFIG_MODEM_SUPPORT 83 int do_mdm_init = 0; 84 extern void mdm_init(void); /* defined in board.c */ 85 #endif 86 87 /*************************************************************************** 88 * Watch for 'delay' seconds for autoboot stop or autoboot delay string. 89 * returns: 0 - no key string, allow autoboot 1 - got key string, abort 90 */ 91 #if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) 92 # if defined(CONFIG_AUTOBOOT_KEYED) 93 #ifndef CONFIG_MENU 94 static inline 95 #endif 96 int abortboot(int bootdelay) 97 { 98 int abort = 0; 99 uint64_t etime = endtick(bootdelay); 100 struct { 101 char* str; 102 u_int len; 103 int retry; 104 } 105 delaykey [] = { 106 { str: getenv ("bootdelaykey"), retry: 1 }, 107 { str: getenv ("bootdelaykey2"), retry: 1 }, 108 { str: getenv ("bootstopkey"), retry: 0 }, 109 { str: getenv ("bootstopkey2"), retry: 0 }, 110 }; 111 112 char presskey [MAX_DELAY_STOP_STR]; 113 u_int presskey_len = 0; 114 u_int presskey_max = 0; 115 u_int i; 116 117 #ifndef CONFIG_ZERO_BOOTDELAY_CHECK 118 if (bootdelay == 0) 119 return 0; 120 #endif 121 122 # ifdef CONFIG_AUTOBOOT_PROMPT 123 printf(CONFIG_AUTOBOOT_PROMPT); 124 # endif 125 126 # ifdef CONFIG_AUTOBOOT_DELAY_STR 127 if (delaykey[0].str == NULL) 128 delaykey[0].str = CONFIG_AUTOBOOT_DELAY_STR; 129 # endif 130 # ifdef CONFIG_AUTOBOOT_DELAY_STR2 131 if (delaykey[1].str == NULL) 132 delaykey[1].str = CONFIG_AUTOBOOT_DELAY_STR2; 133 # endif 134 # ifdef CONFIG_AUTOBOOT_STOP_STR 135 if (delaykey[2].str == NULL) 136 delaykey[2].str = CONFIG_AUTOBOOT_STOP_STR; 137 # endif 138 # ifdef CONFIG_AUTOBOOT_STOP_STR2 139 if (delaykey[3].str == NULL) 140 delaykey[3].str = CONFIG_AUTOBOOT_STOP_STR2; 141 # endif 142 143 for (i = 0; i < sizeof(delaykey) / sizeof(delaykey[0]); i ++) { 144 delaykey[i].len = delaykey[i].str == NULL ? 145 0 : strlen (delaykey[i].str); 146 delaykey[i].len = delaykey[i].len > MAX_DELAY_STOP_STR ? 147 MAX_DELAY_STOP_STR : delaykey[i].len; 148 149 presskey_max = presskey_max > delaykey[i].len ? 150 presskey_max : delaykey[i].len; 151 152 # if DEBUG_BOOTKEYS 153 printf("%s key:<%s>\n", 154 delaykey[i].retry ? "delay" : "stop", 155 delaykey[i].str ? delaykey[i].str : "NULL"); 156 # endif 157 } 158 159 /* In order to keep up with incoming data, check timeout only 160 * when catch up. 161 */ 162 do { 163 if (tstc()) { 164 if (presskey_len < presskey_max) { 165 presskey [presskey_len ++] = getc(); 166 } 167 else { 168 for (i = 0; i < presskey_max - 1; i ++) 169 presskey [i] = presskey [i + 1]; 170 171 presskey [i] = getc(); 172 } 173 } 174 175 for (i = 0; i < sizeof(delaykey) / sizeof(delaykey[0]); i ++) { 176 if (delaykey[i].len > 0 && 177 presskey_len >= delaykey[i].len && 178 memcmp (presskey + presskey_len - delaykey[i].len, 179 delaykey[i].str, 180 delaykey[i].len) == 0) { 181 # if DEBUG_BOOTKEYS 182 printf("got %skey\n", 183 delaykey[i].retry ? "delay" : "stop"); 184 # endif 185 186 # ifdef CONFIG_BOOT_RETRY_TIME 187 /* don't retry auto boot */ 188 if (! delaykey[i].retry) 189 retry_time = -1; 190 # endif 191 abort = 1; 192 } 193 } 194 } while (!abort && get_ticks() <= etime); 195 196 # if DEBUG_BOOTKEYS 197 if (!abort) 198 puts("key timeout\n"); 199 # endif 200 201 #ifdef CONFIG_SILENT_CONSOLE 202 if (abort) 203 gd->flags &= ~GD_FLG_SILENT; 204 #endif 205 206 return abort; 207 } 208 209 # else /* !defined(CONFIG_AUTOBOOT_KEYED) */ 210 211 #ifdef CONFIG_MENUKEY 212 static int menukey = 0; 213 #endif 214 215 #ifndef CONFIG_MENU 216 static inline 217 #endif 218 int abortboot(int bootdelay) 219 { 220 int abort = 0; 221 222 #ifdef CONFIG_MENUPROMPT 223 printf(CONFIG_MENUPROMPT); 224 #else 225 if (bootdelay >= 0) 226 printf("Hit any key to stop autoboot: %2d ", bootdelay); 227 #endif 228 229 #if defined CONFIG_ZERO_BOOTDELAY_CHECK 230 /* 231 * Check if key already pressed 232 * Don't check if bootdelay < 0 233 */ 234 if (bootdelay >= 0) { 235 if (tstc()) { /* we got a key press */ 236 (void) getc(); /* consume input */ 237 puts ("\b\b\b 0"); 238 abort = 1; /* don't auto boot */ 239 } 240 } 241 #endif 242 243 while ((bootdelay > 0) && (!abort)) { 244 int i; 245 246 --bootdelay; 247 /* delay 100 * 10ms */ 248 for (i=0; !abort && i<100; ++i) { 249 if (tstc()) { /* we got a key press */ 250 abort = 1; /* don't auto boot */ 251 bootdelay = 0; /* no more delay */ 252 # ifdef CONFIG_MENUKEY 253 menukey = getc(); 254 # else 255 (void) getc(); /* consume input */ 256 # endif 257 break; 258 } 259 udelay(10000); 260 } 261 262 printf("\b\b\b%2d ", bootdelay); 263 } 264 265 putc('\n'); 266 267 #ifdef CONFIG_SILENT_CONSOLE 268 if (abort) 269 gd->flags &= ~GD_FLG_SILENT; 270 #endif 271 272 return abort; 273 } 274 # endif /* CONFIG_AUTOBOOT_KEYED */ 275 #endif /* CONFIG_BOOTDELAY >= 0 */ 276 277 /****************************************************************************/ 278 279 void main_loop (void) 280 { 281 #ifndef CONFIG_SYS_HUSH_PARSER 282 static char lastcommand[CONFIG_SYS_CBSIZE] = { 0, }; 283 int len; 284 int rc = 1; 285 int flag; 286 #endif 287 288 #if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) 289 char *s; 290 int bootdelay; 291 #endif 292 #ifdef CONFIG_PREBOOT 293 char *p; 294 #endif 295 #ifdef CONFIG_BOOTCOUNT_LIMIT 296 unsigned long bootcount = 0; 297 unsigned long bootlimit = 0; 298 char *bcs; 299 char bcs_set[16]; 300 #endif /* CONFIG_BOOTCOUNT_LIMIT */ 301 302 #ifdef CONFIG_BOOTCOUNT_LIMIT 303 bootcount = bootcount_load(); 304 bootcount++; 305 bootcount_store (bootcount); 306 sprintf (bcs_set, "%lu", bootcount); 307 setenv ("bootcount", bcs_set); 308 bcs = getenv ("bootlimit"); 309 bootlimit = bcs ? simple_strtoul (bcs, NULL, 10) : 0; 310 #endif /* CONFIG_BOOTCOUNT_LIMIT */ 311 312 #ifdef CONFIG_MODEM_SUPPORT 313 debug ("DEBUG: main_loop: do_mdm_init=%d\n", do_mdm_init); 314 if (do_mdm_init) { 315 char *str = strdup(getenv("mdm_cmd")); 316 setenv ("preboot", str); /* set or delete definition */ 317 if (str != NULL) 318 free (str); 319 mdm_init(); /* wait for modem connection */ 320 } 321 #endif /* CONFIG_MODEM_SUPPORT */ 322 323 #ifdef CONFIG_VERSION_VARIABLE 324 { 325 setenv ("ver", version_string); /* set version variable */ 326 } 327 #endif /* CONFIG_VERSION_VARIABLE */ 328 329 #ifdef CONFIG_SYS_HUSH_PARSER 330 u_boot_hush_start (); 331 #endif 332 333 #if defined(CONFIG_HUSH_INIT_VAR) 334 hush_init_var (); 335 #endif 336 337 #ifdef CONFIG_PREBOOT 338 if ((p = getenv ("preboot")) != NULL) { 339 # ifdef CONFIG_AUTOBOOT_KEYED 340 int prev = disable_ctrlc(1); /* disable Control C checking */ 341 # endif 342 343 run_command_list(p, -1, 0); 344 345 # ifdef CONFIG_AUTOBOOT_KEYED 346 disable_ctrlc(prev); /* restore Control C checking */ 347 # endif 348 } 349 #endif /* CONFIG_PREBOOT */ 350 351 #if defined(CONFIG_UPDATE_TFTP) 352 update_tftp (0UL); 353 #endif /* CONFIG_UPDATE_TFTP */ 354 355 #if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) 356 s = getenv ("bootdelay"); 357 bootdelay = s ? (int)simple_strtol(s, NULL, 10) : CONFIG_BOOTDELAY; 358 359 debug ("### main_loop entered: bootdelay=%d\n\n", bootdelay); 360 361 #if defined(CONFIG_MENU_SHOW) 362 bootdelay = menu_show(bootdelay); 363 #endif 364 # ifdef CONFIG_BOOT_RETRY_TIME 365 init_cmd_timeout (); 366 # endif /* CONFIG_BOOT_RETRY_TIME */ 367 368 #ifdef CONFIG_POST 369 if (gd->flags & GD_FLG_POSTFAIL) { 370 s = getenv("failbootcmd"); 371 } 372 else 373 #endif /* CONFIG_POST */ 374 #ifdef CONFIG_BOOTCOUNT_LIMIT 375 if (bootlimit && (bootcount > bootlimit)) { 376 printf ("Warning: Bootlimit (%u) exceeded. Using altbootcmd.\n", 377 (unsigned)bootlimit); 378 s = getenv ("altbootcmd"); 379 } 380 else 381 #endif /* CONFIG_BOOTCOUNT_LIMIT */ 382 s = getenv ("bootcmd"); 383 384 debug ("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>"); 385 386 if (bootdelay != -1 && s && !abortboot(bootdelay)) { 387 # ifdef CONFIG_AUTOBOOT_KEYED 388 int prev = disable_ctrlc(1); /* disable Control C checking */ 389 # endif 390 391 run_command_list(s, -1, 0); 392 393 # ifdef CONFIG_AUTOBOOT_KEYED 394 disable_ctrlc(prev); /* restore Control C checking */ 395 # endif 396 } 397 398 # ifdef CONFIG_MENUKEY 399 if (menukey == CONFIG_MENUKEY) { 400 s = getenv("menucmd"); 401 if (s) 402 run_command_list(s, -1, 0); 403 } 404 #endif /* CONFIG_MENUKEY */ 405 #endif /* CONFIG_BOOTDELAY */ 406 407 /* 408 * Main Loop for Monitor Command Processing 409 */ 410 #ifdef CONFIG_SYS_HUSH_PARSER 411 parse_file_outer(); 412 /* This point is never reached */ 413 for (;;); 414 #else 415 for (;;) { 416 #ifdef CONFIG_BOOT_RETRY_TIME 417 if (rc >= 0) { 418 /* Saw enough of a valid command to 419 * restart the timeout. 420 */ 421 reset_cmd_timeout(); 422 } 423 #endif 424 len = readline (CONFIG_SYS_PROMPT); 425 426 flag = 0; /* assume no special flags for now */ 427 if (len > 0) 428 strcpy (lastcommand, console_buffer); 429 else if (len == 0) 430 flag |= CMD_FLAG_REPEAT; 431 #ifdef CONFIG_BOOT_RETRY_TIME 432 else if (len == -2) { 433 /* -2 means timed out, retry autoboot 434 */ 435 puts ("\nTimed out waiting for command\n"); 436 # ifdef CONFIG_RESET_TO_RETRY 437 /* Reinit board to run initialization code again */ 438 do_reset (NULL, 0, 0, NULL); 439 # else 440 return; /* retry autoboot */ 441 # endif 442 } 443 #endif 444 445 if (len == -1) 446 puts ("<INTERRUPT>\n"); 447 else 448 rc = run_command(lastcommand, flag); 449 450 if (rc <= 0) { 451 /* invalid command or not repeatable, forget it */ 452 lastcommand[0] = 0; 453 } 454 } 455 #endif /*CONFIG_SYS_HUSH_PARSER*/ 456 } 457 458 #ifdef CONFIG_BOOT_RETRY_TIME 459 /*************************************************************************** 460 * initialize command line timeout 461 */ 462 void init_cmd_timeout(void) 463 { 464 char *s = getenv ("bootretry"); 465 466 if (s != NULL) 467 retry_time = (int)simple_strtol(s, NULL, 10); 468 else 469 retry_time = CONFIG_BOOT_RETRY_TIME; 470 471 if (retry_time >= 0 && retry_time < CONFIG_BOOT_RETRY_MIN) 472 retry_time = CONFIG_BOOT_RETRY_MIN; 473 } 474 475 /*************************************************************************** 476 * reset command line timeout to retry_time seconds 477 */ 478 void reset_cmd_timeout(void) 479 { 480 endtime = endtick(retry_time); 481 } 482 #endif 483 484 #ifdef CONFIG_CMDLINE_EDITING 485 486 /* 487 * cmdline-editing related codes from vivi. 488 * Author: Janghoon Lyu <nandy@mizi.com> 489 */ 490 491 #define putnstr(str,n) do { \ 492 printf ("%.*s", (int)n, str); \ 493 } while (0) 494 495 #define CTL_CH(c) ((c) - 'a' + 1) 496 #define CTL_BACKSPACE ('\b') 497 #define DEL ((char)255) 498 #define DEL7 ((char)127) 499 #define CREAD_HIST_CHAR ('!') 500 501 #define getcmd_putch(ch) putc(ch) 502 #define getcmd_getch() getc() 503 #define getcmd_cbeep() getcmd_putch('\a') 504 505 #define HIST_MAX 20 506 #define HIST_SIZE CONFIG_SYS_CBSIZE 507 508 static int hist_max = 0; 509 static int hist_add_idx = 0; 510 static int hist_cur = -1; 511 unsigned hist_num = 0; 512 513 char* hist_list[HIST_MAX]; 514 char hist_lines[HIST_MAX][HIST_SIZE + 1]; /* Save room for NULL */ 515 516 #define add_idx_minus_one() ((hist_add_idx == 0) ? hist_max : hist_add_idx-1) 517 518 static void hist_init(void) 519 { 520 int i; 521 522 hist_max = 0; 523 hist_add_idx = 0; 524 hist_cur = -1; 525 hist_num = 0; 526 527 for (i = 0; i < HIST_MAX; i++) { 528 hist_list[i] = hist_lines[i]; 529 hist_list[i][0] = '\0'; 530 } 531 } 532 533 static void cread_add_to_hist(char *line) 534 { 535 strcpy(hist_list[hist_add_idx], line); 536 537 if (++hist_add_idx >= HIST_MAX) 538 hist_add_idx = 0; 539 540 if (hist_add_idx > hist_max) 541 hist_max = hist_add_idx; 542 543 hist_num++; 544 } 545 546 static char* hist_prev(void) 547 { 548 char *ret; 549 int old_cur; 550 551 if (hist_cur < 0) 552 return NULL; 553 554 old_cur = hist_cur; 555 if (--hist_cur < 0) 556 hist_cur = hist_max; 557 558 if (hist_cur == hist_add_idx) { 559 hist_cur = old_cur; 560 ret = NULL; 561 } else 562 ret = hist_list[hist_cur]; 563 564 return (ret); 565 } 566 567 static char* hist_next(void) 568 { 569 char *ret; 570 571 if (hist_cur < 0) 572 return NULL; 573 574 if (hist_cur == hist_add_idx) 575 return NULL; 576 577 if (++hist_cur > hist_max) 578 hist_cur = 0; 579 580 if (hist_cur == hist_add_idx) { 581 ret = ""; 582 } else 583 ret = hist_list[hist_cur]; 584 585 return (ret); 586 } 587 588 #ifndef CONFIG_CMDLINE_EDITING 589 static void cread_print_hist_list(void) 590 { 591 int i; 592 unsigned long n; 593 594 n = hist_num - hist_max; 595 596 i = hist_add_idx + 1; 597 while (1) { 598 if (i > hist_max) 599 i = 0; 600 if (i == hist_add_idx) 601 break; 602 printf("%s\n", hist_list[i]); 603 n++; 604 i++; 605 } 606 } 607 #endif /* CONFIG_CMDLINE_EDITING */ 608 609 #define BEGINNING_OF_LINE() { \ 610 while (num) { \ 611 getcmd_putch(CTL_BACKSPACE); \ 612 num--; \ 613 } \ 614 } 615 616 #define ERASE_TO_EOL() { \ 617 if (num < eol_num) { \ 618 printf("%*s", (int)(eol_num - num), ""); \ 619 do { \ 620 getcmd_putch(CTL_BACKSPACE); \ 621 } while (--eol_num > num); \ 622 } \ 623 } 624 625 #define REFRESH_TO_EOL() { \ 626 if (num < eol_num) { \ 627 wlen = eol_num - num; \ 628 putnstr(buf + num, wlen); \ 629 num = eol_num; \ 630 } \ 631 } 632 633 static void cread_add_char(char ichar, int insert, unsigned long *num, 634 unsigned long *eol_num, char *buf, unsigned long len) 635 { 636 unsigned long wlen; 637 638 /* room ??? */ 639 if (insert || *num == *eol_num) { 640 if (*eol_num > len - 1) { 641 getcmd_cbeep(); 642 return; 643 } 644 (*eol_num)++; 645 } 646 647 if (insert) { 648 wlen = *eol_num - *num; 649 if (wlen > 1) { 650 memmove(&buf[*num+1], &buf[*num], wlen-1); 651 } 652 653 buf[*num] = ichar; 654 putnstr(buf + *num, wlen); 655 (*num)++; 656 while (--wlen) { 657 getcmd_putch(CTL_BACKSPACE); 658 } 659 } else { 660 /* echo the character */ 661 wlen = 1; 662 buf[*num] = ichar; 663 putnstr(buf + *num, wlen); 664 (*num)++; 665 } 666 } 667 668 static void cread_add_str(char *str, int strsize, int insert, unsigned long *num, 669 unsigned long *eol_num, char *buf, unsigned long len) 670 { 671 while (strsize--) { 672 cread_add_char(*str, insert, num, eol_num, buf, len); 673 str++; 674 } 675 } 676 677 static int cread_line(const char *const prompt, char *buf, unsigned int *len, 678 int timeout) 679 { 680 unsigned long num = 0; 681 unsigned long eol_num = 0; 682 unsigned long wlen; 683 char ichar; 684 int insert = 1; 685 int esc_len = 0; 686 char esc_save[8]; 687 int init_len = strlen(buf); 688 int first = 1; 689 690 if (init_len) 691 cread_add_str(buf, init_len, 1, &num, &eol_num, buf, *len); 692 693 while (1) { 694 #ifdef CONFIG_BOOT_RETRY_TIME 695 while (!tstc()) { /* while no incoming data */ 696 if (retry_time >= 0 && get_ticks() > endtime) 697 return (-2); /* timed out */ 698 WATCHDOG_RESET(); 699 } 700 #endif 701 if (first && timeout) { 702 uint64_t etime = endtick(timeout); 703 704 while (!tstc()) { /* while no incoming data */ 705 if (get_ticks() >= etime) 706 return -2; /* timed out */ 707 WATCHDOG_RESET(); 708 } 709 first = 0; 710 } 711 712 ichar = getcmd_getch(); 713 714 if ((ichar == '\n') || (ichar == '\r')) { 715 putc('\n'); 716 break; 717 } 718 719 /* 720 * handle standard linux xterm esc sequences for arrow key, etc. 721 */ 722 if (esc_len != 0) { 723 if (esc_len == 1) { 724 if (ichar == '[') { 725 esc_save[esc_len] = ichar; 726 esc_len = 2; 727 } else { 728 cread_add_str(esc_save, esc_len, insert, 729 &num, &eol_num, buf, *len); 730 esc_len = 0; 731 } 732 continue; 733 } 734 735 switch (ichar) { 736 737 case 'D': /* <- key */ 738 ichar = CTL_CH('b'); 739 esc_len = 0; 740 break; 741 case 'C': /* -> key */ 742 ichar = CTL_CH('f'); 743 esc_len = 0; 744 break; /* pass off to ^F handler */ 745 case 'H': /* Home key */ 746 ichar = CTL_CH('a'); 747 esc_len = 0; 748 break; /* pass off to ^A handler */ 749 case 'A': /* up arrow */ 750 ichar = CTL_CH('p'); 751 esc_len = 0; 752 break; /* pass off to ^P handler */ 753 case 'B': /* down arrow */ 754 ichar = CTL_CH('n'); 755 esc_len = 0; 756 break; /* pass off to ^N handler */ 757 default: 758 esc_save[esc_len++] = ichar; 759 cread_add_str(esc_save, esc_len, insert, 760 &num, &eol_num, buf, *len); 761 esc_len = 0; 762 continue; 763 } 764 } 765 766 switch (ichar) { 767 case 0x1b: 768 if (esc_len == 0) { 769 esc_save[esc_len] = ichar; 770 esc_len = 1; 771 } else { 772 puts("impossible condition #876\n"); 773 esc_len = 0; 774 } 775 break; 776 777 case CTL_CH('a'): 778 BEGINNING_OF_LINE(); 779 break; 780 case CTL_CH('c'): /* ^C - break */ 781 *buf = '\0'; /* discard input */ 782 return (-1); 783 case CTL_CH('f'): 784 if (num < eol_num) { 785 getcmd_putch(buf[num]); 786 num++; 787 } 788 break; 789 case CTL_CH('b'): 790 if (num) { 791 getcmd_putch(CTL_BACKSPACE); 792 num--; 793 } 794 break; 795 case CTL_CH('d'): 796 if (num < eol_num) { 797 wlen = eol_num - num - 1; 798 if (wlen) { 799 memmove(&buf[num], &buf[num+1], wlen); 800 putnstr(buf + num, wlen); 801 } 802 803 getcmd_putch(' '); 804 do { 805 getcmd_putch(CTL_BACKSPACE); 806 } while (wlen--); 807 eol_num--; 808 } 809 break; 810 case CTL_CH('k'): 811 ERASE_TO_EOL(); 812 break; 813 case CTL_CH('e'): 814 REFRESH_TO_EOL(); 815 break; 816 case CTL_CH('o'): 817 insert = !insert; 818 break; 819 case CTL_CH('x'): 820 case CTL_CH('u'): 821 BEGINNING_OF_LINE(); 822 ERASE_TO_EOL(); 823 break; 824 case DEL: 825 case DEL7: 826 case 8: 827 if (num) { 828 wlen = eol_num - num; 829 num--; 830 memmove(&buf[num], &buf[num+1], wlen); 831 getcmd_putch(CTL_BACKSPACE); 832 putnstr(buf + num, wlen); 833 getcmd_putch(' '); 834 do { 835 getcmd_putch(CTL_BACKSPACE); 836 } while (wlen--); 837 eol_num--; 838 } 839 break; 840 case CTL_CH('p'): 841 case CTL_CH('n'): 842 { 843 char * hline; 844 845 esc_len = 0; 846 847 if (ichar == CTL_CH('p')) 848 hline = hist_prev(); 849 else 850 hline = hist_next(); 851 852 if (!hline) { 853 getcmd_cbeep(); 854 continue; 855 } 856 857 /* nuke the current line */ 858 /* first, go home */ 859 BEGINNING_OF_LINE(); 860 861 /* erase to end of line */ 862 ERASE_TO_EOL(); 863 864 /* copy new line into place and display */ 865 strcpy(buf, hline); 866 eol_num = strlen(buf); 867 REFRESH_TO_EOL(); 868 continue; 869 } 870 #ifdef CONFIG_AUTO_COMPLETE 871 case '\t': { 872 int num2, col; 873 874 /* do not autocomplete when in the middle */ 875 if (num < eol_num) { 876 getcmd_cbeep(); 877 break; 878 } 879 880 buf[num] = '\0'; 881 col = strlen(prompt) + eol_num; 882 num2 = num; 883 if (cmd_auto_complete(prompt, buf, &num2, &col)) { 884 col = num2 - num; 885 num += col; 886 eol_num += col; 887 } 888 break; 889 } 890 #endif 891 default: 892 cread_add_char(ichar, insert, &num, &eol_num, buf, *len); 893 break; 894 } 895 } 896 *len = eol_num; 897 buf[eol_num] = '\0'; /* lose the newline */ 898 899 if (buf[0] && buf[0] != CREAD_HIST_CHAR) 900 cread_add_to_hist(buf); 901 hist_cur = hist_add_idx; 902 903 return 0; 904 } 905 906 #endif /* CONFIG_CMDLINE_EDITING */ 907 908 /****************************************************************************/ 909 910 /* 911 * Prompt for input and read a line. 912 * If CONFIG_BOOT_RETRY_TIME is defined and retry_time >= 0, 913 * time out when time goes past endtime (timebase time in ticks). 914 * Return: number of read characters 915 * -1 if break 916 * -2 if timed out 917 */ 918 int readline (const char *const prompt) 919 { 920 /* 921 * If console_buffer isn't 0-length the user will be prompted to modify 922 * it instead of entering it from scratch as desired. 923 */ 924 console_buffer[0] = '\0'; 925 926 return readline_into_buffer(prompt, console_buffer, 0); 927 } 928 929 930 int readline_into_buffer(const char *const prompt, char *buffer, int timeout) 931 { 932 char *p = buffer; 933 #ifdef CONFIG_CMDLINE_EDITING 934 unsigned int len = CONFIG_SYS_CBSIZE; 935 int rc; 936 static int initted = 0; 937 938 /* 939 * History uses a global array which is not 940 * writable until after relocation to RAM. 941 * Revert to non-history version if still 942 * running from flash. 943 */ 944 if (gd->flags & GD_FLG_RELOC) { 945 if (!initted) { 946 hist_init(); 947 initted = 1; 948 } 949 950 if (prompt) 951 puts (prompt); 952 953 rc = cread_line(prompt, p, &len, timeout); 954 return rc < 0 ? rc : len; 955 956 } else { 957 #endif /* CONFIG_CMDLINE_EDITING */ 958 char * p_buf = p; 959 int n = 0; /* buffer index */ 960 int plen = 0; /* prompt length */ 961 int col; /* output column cnt */ 962 char c; 963 964 /* print prompt */ 965 if (prompt) { 966 plen = strlen (prompt); 967 puts (prompt); 968 } 969 col = plen; 970 971 for (;;) { 972 #ifdef CONFIG_BOOT_RETRY_TIME 973 while (!tstc()) { /* while no incoming data */ 974 if (retry_time >= 0 && get_ticks() > endtime) 975 return (-2); /* timed out */ 976 WATCHDOG_RESET(); 977 } 978 #endif 979 WATCHDOG_RESET(); /* Trigger watchdog, if needed */ 980 981 #ifdef CONFIG_SHOW_ACTIVITY 982 while (!tstc()) { 983 show_activity(0); 984 WATCHDOG_RESET(); 985 } 986 #endif 987 c = getc(); 988 989 /* 990 * Special character handling 991 */ 992 switch (c) { 993 case '\r': /* Enter */ 994 case '\n': 995 *p = '\0'; 996 puts ("\r\n"); 997 return (p - p_buf); 998 999 case '\0': /* nul */ 1000 continue; 1001 1002 case 0x03: /* ^C - break */ 1003 p_buf[0] = '\0'; /* discard input */ 1004 return (-1); 1005 1006 case 0x15: /* ^U - erase line */ 1007 while (col > plen) { 1008 puts (erase_seq); 1009 --col; 1010 } 1011 p = p_buf; 1012 n = 0; 1013 continue; 1014 1015 case 0x17: /* ^W - erase word */ 1016 p=delete_char(p_buf, p, &col, &n, plen); 1017 while ((n > 0) && (*p != ' ')) { 1018 p=delete_char(p_buf, p, &col, &n, plen); 1019 } 1020 continue; 1021 1022 case 0x08: /* ^H - backspace */ 1023 case 0x7F: /* DEL - backspace */ 1024 p=delete_char(p_buf, p, &col, &n, plen); 1025 continue; 1026 1027 default: 1028 /* 1029 * Must be a normal character then 1030 */ 1031 if (n < CONFIG_SYS_CBSIZE-2) { 1032 if (c == '\t') { /* expand TABs */ 1033 #ifdef CONFIG_AUTO_COMPLETE 1034 /* if auto completion triggered just continue */ 1035 *p = '\0'; 1036 if (cmd_auto_complete(prompt, console_buffer, &n, &col)) { 1037 p = p_buf + n; /* reset */ 1038 continue; 1039 } 1040 #endif 1041 puts (tab_seq+(col&07)); 1042 col += 8 - (col&07); 1043 } else { 1044 ++col; /* echo input */ 1045 putc (c); 1046 } 1047 *p++ = c; 1048 ++n; 1049 } else { /* Buffer full */ 1050 putc ('\a'); 1051 } 1052 } 1053 } 1054 #ifdef CONFIG_CMDLINE_EDITING 1055 } 1056 #endif 1057 } 1058 1059 /****************************************************************************/ 1060 1061 static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen) 1062 { 1063 char *s; 1064 1065 if (*np == 0) { 1066 return (p); 1067 } 1068 1069 if (*(--p) == '\t') { /* will retype the whole line */ 1070 while (*colp > plen) { 1071 puts (erase_seq); 1072 (*colp)--; 1073 } 1074 for (s=buffer; s<p; ++s) { 1075 if (*s == '\t') { 1076 puts (tab_seq+((*colp) & 07)); 1077 *colp += 8 - ((*colp) & 07); 1078 } else { 1079 ++(*colp); 1080 putc (*s); 1081 } 1082 } 1083 } else { 1084 puts (erase_seq); 1085 (*colp)--; 1086 } 1087 (*np)--; 1088 return (p); 1089 } 1090 1091 /****************************************************************************/ 1092 1093 int parse_line (char *line, char *argv[]) 1094 { 1095 int nargs = 0; 1096 1097 #ifdef DEBUG_PARSER 1098 printf ("parse_line: \"%s\"\n", line); 1099 #endif 1100 while (nargs < CONFIG_SYS_MAXARGS) { 1101 1102 /* skip any white space */ 1103 while (isblank(*line)) 1104 ++line; 1105 1106 if (*line == '\0') { /* end of line, no more args */ 1107 argv[nargs] = NULL; 1108 #ifdef DEBUG_PARSER 1109 printf ("parse_line: nargs=%d\n", nargs); 1110 #endif 1111 return (nargs); 1112 } 1113 1114 argv[nargs++] = line; /* begin of argument string */ 1115 1116 /* find end of string */ 1117 while (*line && !isblank(*line)) 1118 ++line; 1119 1120 if (*line == '\0') { /* end of line, no more args */ 1121 argv[nargs] = NULL; 1122 #ifdef DEBUG_PARSER 1123 printf ("parse_line: nargs=%d\n", nargs); 1124 #endif 1125 return (nargs); 1126 } 1127 1128 *line++ = '\0'; /* terminate current arg */ 1129 } 1130 1131 printf ("** Too many args (max. %d) **\n", CONFIG_SYS_MAXARGS); 1132 1133 #ifdef DEBUG_PARSER 1134 printf ("parse_line: nargs=%d\n", nargs); 1135 #endif 1136 return (nargs); 1137 } 1138 1139 /****************************************************************************/ 1140 1141 #ifndef CONFIG_SYS_HUSH_PARSER 1142 static void process_macros (const char *input, char *output) 1143 { 1144 char c, prev; 1145 const char *varname_start = NULL; 1146 int inputcnt = strlen (input); 1147 int outputcnt = CONFIG_SYS_CBSIZE; 1148 int state = 0; /* 0 = waiting for '$' */ 1149 1150 /* 1 = waiting for '(' or '{' */ 1151 /* 2 = waiting for ')' or '}' */ 1152 /* 3 = waiting for ''' */ 1153 #ifdef DEBUG_PARSER 1154 char *output_start = output; 1155 1156 printf ("[PROCESS_MACROS] INPUT len %d: \"%s\"\n", strlen (input), 1157 input); 1158 #endif 1159 1160 prev = '\0'; /* previous character */ 1161 1162 while (inputcnt && outputcnt) { 1163 c = *input++; 1164 inputcnt--; 1165 1166 if (state != 3) { 1167 /* remove one level of escape characters */ 1168 if ((c == '\\') && (prev != '\\')) { 1169 if (inputcnt-- == 0) 1170 break; 1171 prev = c; 1172 c = *input++; 1173 } 1174 } 1175 1176 switch (state) { 1177 case 0: /* Waiting for (unescaped) $ */ 1178 if ((c == '\'') && (prev != '\\')) { 1179 state = 3; 1180 break; 1181 } 1182 if ((c == '$') && (prev != '\\')) { 1183 state++; 1184 } else { 1185 *(output++) = c; 1186 outputcnt--; 1187 } 1188 break; 1189 case 1: /* Waiting for ( */ 1190 if (c == '(' || c == '{') { 1191 state++; 1192 varname_start = input; 1193 } else { 1194 state = 0; 1195 *(output++) = '$'; 1196 outputcnt--; 1197 1198 if (outputcnt) { 1199 *(output++) = c; 1200 outputcnt--; 1201 } 1202 } 1203 break; 1204 case 2: /* Waiting for ) */ 1205 if (c == ')' || c == '}') { 1206 int i; 1207 char envname[CONFIG_SYS_CBSIZE], *envval; 1208 int envcnt = input - varname_start - 1; /* Varname # of chars */ 1209 1210 /* Get the varname */ 1211 for (i = 0; i < envcnt; i++) { 1212 envname[i] = varname_start[i]; 1213 } 1214 envname[i] = 0; 1215 1216 /* Get its value */ 1217 envval = getenv (envname); 1218 1219 /* Copy into the line if it exists */ 1220 if (envval != NULL) 1221 while ((*envval) && outputcnt) { 1222 *(output++) = *(envval++); 1223 outputcnt--; 1224 } 1225 /* Look for another '$' */ 1226 state = 0; 1227 } 1228 break; 1229 case 3: /* Waiting for ' */ 1230 if ((c == '\'') && (prev != '\\')) { 1231 state = 0; 1232 } else { 1233 *(output++) = c; 1234 outputcnt--; 1235 } 1236 break; 1237 } 1238 prev = c; 1239 } 1240 1241 if (outputcnt) 1242 *output = 0; 1243 else 1244 *(output - 1) = 0; 1245 1246 #ifdef DEBUG_PARSER 1247 printf ("[PROCESS_MACROS] OUTPUT len %d: \"%s\"\n", 1248 strlen (output_start), output_start); 1249 #endif 1250 } 1251 1252 /**************************************************************************** 1253 * returns: 1254 * 1 - command executed, repeatable 1255 * 0 - command executed but not repeatable, interrupted commands are 1256 * always considered not repeatable 1257 * -1 - not executed (unrecognized, bootd recursion or too many args) 1258 * (If cmd is NULL or "" or longer than CONFIG_SYS_CBSIZE-1 it is 1259 * considered unrecognized) 1260 * 1261 * WARNING: 1262 * 1263 * We must create a temporary copy of the command since the command we get 1264 * may be the result from getenv(), which returns a pointer directly to 1265 * the environment data, which may change magicly when the command we run 1266 * creates or modifies environment variables (like "bootp" does). 1267 */ 1268 static int builtin_run_command(const char *cmd, int flag) 1269 { 1270 char cmdbuf[CONFIG_SYS_CBSIZE]; /* working copy of cmd */ 1271 char *token; /* start of token in cmdbuf */ 1272 char *sep; /* end of token (separator) in cmdbuf */ 1273 char finaltoken[CONFIG_SYS_CBSIZE]; 1274 char *str = cmdbuf; 1275 char *argv[CONFIG_SYS_MAXARGS + 1]; /* NULL terminated */ 1276 int argc, inquotes; 1277 int repeatable = 1; 1278 int rc = 0; 1279 1280 #ifdef DEBUG_PARSER 1281 printf ("[RUN_COMMAND] cmd[%p]=\"", cmd); 1282 puts (cmd ? cmd : "NULL"); /* use puts - string may be loooong */ 1283 puts ("\"\n"); 1284 #endif 1285 1286 clear_ctrlc(); /* forget any previous Control C */ 1287 1288 if (!cmd || !*cmd) { 1289 return -1; /* empty command */ 1290 } 1291 1292 if (strlen(cmd) >= CONFIG_SYS_CBSIZE) { 1293 puts ("## Command too long!\n"); 1294 return -1; 1295 } 1296 1297 strcpy (cmdbuf, cmd); 1298 1299 /* Process separators and check for invalid 1300 * repeatable commands 1301 */ 1302 1303 #ifdef DEBUG_PARSER 1304 printf ("[PROCESS_SEPARATORS] %s\n", cmd); 1305 #endif 1306 while (*str) { 1307 1308 /* 1309 * Find separator, or string end 1310 * Allow simple escape of ';' by writing "\;" 1311 */ 1312 for (inquotes = 0, sep = str; *sep; sep++) { 1313 if ((*sep=='\'') && 1314 (*(sep-1) != '\\')) 1315 inquotes=!inquotes; 1316 1317 if (!inquotes && 1318 (*sep == ';') && /* separator */ 1319 ( sep != str) && /* past string start */ 1320 (*(sep-1) != '\\')) /* and NOT escaped */ 1321 break; 1322 } 1323 1324 /* 1325 * Limit the token to data between separators 1326 */ 1327 token = str; 1328 if (*sep) { 1329 str = sep + 1; /* start of command for next pass */ 1330 *sep = '\0'; 1331 } 1332 else 1333 str = sep; /* no more commands for next pass */ 1334 #ifdef DEBUG_PARSER 1335 printf ("token: \"%s\"\n", token); 1336 #endif 1337 1338 /* find macros in this token and replace them */ 1339 process_macros (token, finaltoken); 1340 1341 /* Extract arguments */ 1342 if ((argc = parse_line (finaltoken, argv)) == 0) { 1343 rc = -1; /* no command at all */ 1344 continue; 1345 } 1346 1347 if (cmd_process(flag, argc, argv, &repeatable)) 1348 rc = -1; 1349 1350 /* Did the user stop this? */ 1351 if (had_ctrlc ()) 1352 return -1; /* if stopped then not repeatable */ 1353 } 1354 1355 return rc ? rc : repeatable; 1356 } 1357 #endif 1358 1359 /* 1360 * Run a command using the selected parser. 1361 * 1362 * @param cmd Command to run 1363 * @param flag Execution flags (CMD_FLAG_...) 1364 * @return 0 on success, or != 0 on error. 1365 */ 1366 int run_command(const char *cmd, int flag) 1367 { 1368 #ifndef CONFIG_SYS_HUSH_PARSER 1369 /* 1370 * builtin_run_command can return 0 or 1 for success, so clean up 1371 * its result. 1372 */ 1373 if (builtin_run_command(cmd, flag) == -1) 1374 return 1; 1375 1376 return 0; 1377 #else 1378 return parse_string_outer(cmd, 1379 FLAG_PARSE_SEMICOLON | FLAG_EXIT_FROM_LOOP); 1380 #endif 1381 } 1382 1383 #ifndef CONFIG_SYS_HUSH_PARSER 1384 /** 1385 * Execute a list of command separated by ; or \n using the built-in parser. 1386 * 1387 * This function cannot take a const char * for the command, since if it 1388 * finds newlines in the string, it replaces them with \0. 1389 * 1390 * @param cmd String containing list of commands 1391 * @param flag Execution flags (CMD_FLAG_...) 1392 * @return 0 on success, or != 0 on error. 1393 */ 1394 static int builtin_run_command_list(char *cmd, int flag) 1395 { 1396 char *line, *next; 1397 int rcode = 0; 1398 1399 /* 1400 * Break into individual lines, and execute each line; terminate on 1401 * error. 1402 */ 1403 line = next = cmd; 1404 while (*next) { 1405 if (*next == '\n') { 1406 *next = '\0'; 1407 /* run only non-empty commands */ 1408 if (*line) { 1409 debug("** exec: \"%s\"\n", line); 1410 if (builtin_run_command(line, 0) < 0) { 1411 rcode = 1; 1412 break; 1413 } 1414 } 1415 line = next + 1; 1416 } 1417 ++next; 1418 } 1419 if (rcode == 0 && *line) 1420 rcode = (builtin_run_command(line, 0) >= 0); 1421 1422 return rcode; 1423 } 1424 #endif 1425 1426 int run_command_list(const char *cmd, int len, int flag) 1427 { 1428 int need_buff = 1; 1429 char *buff = (char *)cmd; /* cast away const */ 1430 int rcode = 0; 1431 1432 if (len == -1) { 1433 len = strlen(cmd); 1434 #ifdef CONFIG_SYS_HUSH_PARSER 1435 /* hush will never change our string */ 1436 need_buff = 0; 1437 #else 1438 /* the built-in parser will change our string if it sees \n */ 1439 need_buff = strchr(cmd, '\n') != NULL; 1440 #endif 1441 } 1442 if (need_buff) { 1443 buff = malloc(len + 1); 1444 if (!buff) 1445 return 1; 1446 memcpy(buff, cmd, len); 1447 buff[len] = '\0'; 1448 } 1449 #ifdef CONFIG_SYS_HUSH_PARSER 1450 rcode = parse_string_outer(buff, FLAG_PARSE_SEMICOLON); 1451 #else 1452 /* 1453 * This function will overwrite any \n it sees with a \0, which 1454 * is why it can't work with a const char *. Here we are making 1455 * using of internal knowledge of this function, to avoid always 1456 * doing a malloc() which is actually required only in a case that 1457 * is pretty rare. 1458 */ 1459 rcode = builtin_run_command_list(buff, flag); 1460 if (need_buff) 1461 free(buff); 1462 #endif 1463 1464 return rcode; 1465 } 1466 1467 /****************************************************************************/ 1468 1469 #if defined(CONFIG_CMD_RUN) 1470 int do_run (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) 1471 { 1472 int i; 1473 1474 if (argc < 2) 1475 return CMD_RET_USAGE; 1476 1477 for (i=1; i<argc; ++i) { 1478 char *arg; 1479 1480 if ((arg = getenv (argv[i])) == NULL) { 1481 printf ("## Error: \"%s\" not defined\n", argv[i]); 1482 return 1; 1483 } 1484 1485 if (run_command(arg, flag) != 0) 1486 return 1; 1487 } 1488 return 0; 1489 } 1490 #endif 1491