1 /* 2 * Copyright (c) 2011 The Chromium OS Authors. 3 * (C) Copyright 2002-2006 4 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 5 * 6 * (C) Copyright 2002 7 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> 8 * Marius Groeger <mgroeger@sysgo.de> 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #include <common.h> 14 #include <console.h> 15 #include <environment.h> 16 #include <dm.h> 17 #include <fdtdec.h> 18 #include <fs.h> 19 #include <i2c.h> 20 #include <initcall.h> 21 #include <init_helpers.h> 22 #include <logbuff.h> 23 #include <malloc.h> 24 #include <mapmem.h> 25 #include <os.h> 26 #include <post.h> 27 #include <relocate.h> 28 #include <spi.h> 29 #include <status_led.h> 30 #include <timer.h> 31 #include <trace.h> 32 #include <video.h> 33 #include <watchdog.h> 34 #ifdef CONFIG_MACH_TYPE 35 #include <asm/mach-types.h> 36 #endif 37 #if defined(CONFIG_MP) && defined(CONFIG_PPC) 38 #include <asm/mp.h> 39 #endif 40 #include <asm/io.h> 41 #include <asm/sections.h> 42 #include <dm/root.h> 43 #include <linux/errno.h> 44 45 /* 46 * Pointer to initial global data area 47 * 48 * Here we initialize it if needed. 49 */ 50 #ifdef XTRN_DECLARE_GLOBAL_DATA_PTR 51 #undef XTRN_DECLARE_GLOBAL_DATA_PTR 52 #define XTRN_DECLARE_GLOBAL_DATA_PTR /* empty = allocate here */ 53 DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CONFIG_SYS_INIT_GD_ADDR); 54 #else 55 DECLARE_GLOBAL_DATA_PTR; 56 #endif 57 58 /* 59 * TODO(sjg@chromium.org): IMO this code should be 60 * refactored to a single function, something like: 61 * 62 * void led_set_state(enum led_colour_t colour, int on); 63 */ 64 /************************************************************************ 65 * Coloured LED functionality 66 ************************************************************************ 67 * May be supplied by boards if desired 68 */ 69 __weak void coloured_LED_init(void) {} 70 __weak void red_led_on(void) {} 71 __weak void red_led_off(void) {} 72 __weak void green_led_on(void) {} 73 __weak void green_led_off(void) {} 74 __weak void yellow_led_on(void) {} 75 __weak void yellow_led_off(void) {} 76 __weak void blue_led_on(void) {} 77 __weak void blue_led_off(void) {} 78 79 /* 80 * Why is gd allocated a register? Prior to reloc it might be better to 81 * just pass it around to each function in this file? 82 * 83 * After reloc one could argue that it is hardly used and doesn't need 84 * to be in a register. Or if it is it should perhaps hold pointers to all 85 * global data for all modules, so that post-reloc we can avoid the massive 86 * literal pool we get on ARM. Or perhaps just encourage each module to use 87 * a structure... 88 */ 89 90 #if defined(CONFIG_WATCHDOG) || defined(CONFIG_HW_WATCHDOG) 91 static int init_func_watchdog_init(void) 92 { 93 # if defined(CONFIG_HW_WATCHDOG) && \ 94 (defined(CONFIG_M68K) || defined(CONFIG_MICROBLAZE) || \ 95 defined(CONFIG_SH) || defined(CONFIG_AT91SAM9_WATCHDOG) || \ 96 defined(CONFIG_DESIGNWARE_WATCHDOG) || \ 97 defined(CONFIG_IMX_WATCHDOG)) 98 hw_watchdog_init(); 99 puts(" Watchdog enabled\n"); 100 # endif 101 WATCHDOG_RESET(); 102 103 return 0; 104 } 105 106 int init_func_watchdog_reset(void) 107 { 108 WATCHDOG_RESET(); 109 110 return 0; 111 } 112 #endif /* CONFIG_WATCHDOG */ 113 114 __weak void board_add_ram_info(int use_default) 115 { 116 /* please define platform specific board_add_ram_info() */ 117 } 118 119 static int init_baud_rate(void) 120 { 121 gd->baudrate = env_get_ulong("baudrate", 10, CONFIG_BAUDRATE); 122 return 0; 123 } 124 125 static int display_text_info(void) 126 { 127 #if !defined(CONFIG_SANDBOX) && !defined(CONFIG_EFI_APP) 128 ulong bss_start, bss_end, text_base; 129 130 bss_start = (ulong)&__bss_start; 131 bss_end = (ulong)&__bss_end; 132 133 #ifdef CONFIG_SYS_TEXT_BASE 134 text_base = CONFIG_SYS_TEXT_BASE; 135 #else 136 text_base = CONFIG_SYS_MONITOR_BASE; 137 #endif 138 139 debug("U-Boot code: %08lX -> %08lX BSS: -> %08lX\n", 140 text_base, bss_start, bss_end); 141 #endif 142 143 return 0; 144 } 145 146 static int announce_dram_init(void) 147 { 148 puts("DRAM: "); 149 return 0; 150 } 151 152 static int show_dram_config(void) 153 { 154 unsigned long long size; 155 156 #ifdef CONFIG_NR_DRAM_BANKS 157 int i; 158 159 debug("\nRAM Configuration:\n"); 160 for (i = size = 0; i < CONFIG_NR_DRAM_BANKS; i++) { 161 size += gd->bd->bi_dram[i].size; 162 debug("Bank #%d: %llx ", i, 163 (unsigned long long)(gd->bd->bi_dram[i].start)); 164 #ifdef DEBUG 165 print_size(gd->bd->bi_dram[i].size, "\n"); 166 #endif 167 } 168 debug("\nDRAM: "); 169 #else 170 size = gd->ram_size; 171 #endif 172 173 print_size(size, ""); 174 board_add_ram_info(0); 175 putc('\n'); 176 177 return 0; 178 } 179 180 __weak int dram_init_banksize(void) 181 { 182 #if defined(CONFIG_NR_DRAM_BANKS) && defined(CONFIG_SYS_SDRAM_BASE) 183 gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; 184 gd->bd->bi_dram[0].size = get_effective_memsize(); 185 #endif 186 187 return 0; 188 } 189 190 #if defined(CONFIG_SYS_I2C) 191 static int init_func_i2c(void) 192 { 193 puts("I2C: "); 194 #ifdef CONFIG_SYS_I2C 195 i2c_init_all(); 196 #else 197 i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); 198 #endif 199 puts("ready\n"); 200 return 0; 201 } 202 #endif 203 204 #if defined(CONFIG_HARD_SPI) 205 static int init_func_spi(void) 206 { 207 puts("SPI: "); 208 spi_init(); 209 puts("ready\n"); 210 return 0; 211 } 212 #endif 213 214 __maybe_unused 215 static int zero_global_data(void) 216 { 217 memset((void *)gd, '\0', sizeof(gd_t)); 218 219 return 0; 220 } 221 222 static int setup_mon_len(void) 223 { 224 #if defined(__ARM__) || defined(__MICROBLAZE__) 225 gd->mon_len = (ulong)&__bss_end - (ulong)_start; 226 #elif defined(CONFIG_SANDBOX) || defined(CONFIG_EFI_APP) 227 gd->mon_len = (ulong)&_end - (ulong)_init; 228 #elif defined(CONFIG_NIOS2) || defined(CONFIG_XTENSA) 229 gd->mon_len = CONFIG_SYS_MONITOR_LEN; 230 #elif defined(CONFIG_NDS32) || defined(CONFIG_SH) 231 gd->mon_len = (ulong)(&__bss_end) - (ulong)(&_start); 232 #elif defined(CONFIG_SYS_MONITOR_BASE) 233 /* TODO: use (ulong)&__bss_end - (ulong)&__text_start; ? */ 234 gd->mon_len = (ulong)&__bss_end - CONFIG_SYS_MONITOR_BASE; 235 #endif 236 return 0; 237 } 238 239 __weak int arch_cpu_init(void) 240 { 241 return 0; 242 } 243 244 __weak int mach_cpu_init(void) 245 { 246 return 0; 247 } 248 249 /* Get the top of usable RAM */ 250 __weak ulong board_get_usable_ram_top(ulong total_size) 251 { 252 #ifdef CONFIG_SYS_SDRAM_BASE 253 /* 254 * Detect whether we have so much RAM that it goes past the end of our 255 * 32-bit address space. If so, clip the usable RAM so it doesn't. 256 */ 257 if (gd->ram_top < CONFIG_SYS_SDRAM_BASE) 258 /* 259 * Will wrap back to top of 32-bit space when reservations 260 * are made. 261 */ 262 return 0; 263 #endif 264 return gd->ram_top; 265 } 266 267 static int setup_dest_addr(void) 268 { 269 debug("Monitor len: %08lX\n", gd->mon_len); 270 /* 271 * Ram is setup, size stored in gd !! 272 */ 273 debug("Ram size: %08lX\n", (ulong)gd->ram_size); 274 #if defined(CONFIG_SYS_MEM_TOP_HIDE) 275 /* 276 * Subtract specified amount of memory to hide so that it won't 277 * get "touched" at all by U-Boot. By fixing up gd->ram_size 278 * the Linux kernel should now get passed the now "corrected" 279 * memory size and won't touch it either. This should work 280 * for arch/ppc and arch/powerpc. Only Linux board ports in 281 * arch/powerpc with bootwrapper support, that recalculate the 282 * memory size from the SDRAM controller setup will have to 283 * get fixed. 284 */ 285 gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE; 286 #endif 287 #ifdef CONFIG_SYS_SDRAM_BASE 288 gd->ram_top = CONFIG_SYS_SDRAM_BASE; 289 #endif 290 gd->ram_top += get_effective_memsize(); 291 gd->ram_top = board_get_usable_ram_top(gd->mon_len); 292 gd->relocaddr = gd->ram_top; 293 debug("Ram top: %08lX\n", (ulong)gd->ram_top); 294 #if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500)) 295 /* 296 * We need to make sure the location we intend to put secondary core 297 * boot code is reserved and not used by any part of u-boot 298 */ 299 if (gd->relocaddr > determine_mp_bootpg(NULL)) { 300 gd->relocaddr = determine_mp_bootpg(NULL); 301 debug("Reserving MP boot page to %08lx\n", gd->relocaddr); 302 } 303 #endif 304 return 0; 305 } 306 307 #if defined(CONFIG_LOGBUFFER) 308 static int reserve_logbuffer(void) 309 { 310 #ifndef CONFIG_ALT_LB_ADDR 311 /* reserve kernel log buffer */ 312 gd->relocaddr -= LOGBUFF_RESERVE; 313 debug("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, 314 gd->relocaddr); 315 #endif 316 317 return 0; 318 } 319 #endif 320 321 #ifdef CONFIG_PRAM 322 /* reserve protected RAM */ 323 static int reserve_pram(void) 324 { 325 ulong reg; 326 327 reg = env_get_ulong("pram", 10, CONFIG_PRAM); 328 gd->relocaddr -= (reg << 10); /* size is in kB */ 329 debug("Reserving %ldk for protected RAM at %08lx\n", reg, 330 gd->relocaddr); 331 return 0; 332 } 333 #endif /* CONFIG_PRAM */ 334 335 /* Round memory pointer down to next 4 kB limit */ 336 static int reserve_round_4k(void) 337 { 338 gd->relocaddr &= ~(4096 - 1); 339 return 0; 340 } 341 342 #ifdef CONFIG_ARM 343 __weak int reserve_mmu(void) 344 { 345 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) 346 /* reserve TLB table */ 347 gd->arch.tlb_size = PGTABLE_SIZE; 348 gd->relocaddr -= gd->arch.tlb_size; 349 350 /* round down to next 64 kB limit */ 351 gd->relocaddr &= ~(0x10000 - 1); 352 353 gd->arch.tlb_addr = gd->relocaddr; 354 debug("TLB table from %08lx to %08lx\n", gd->arch.tlb_addr, 355 gd->arch.tlb_addr + gd->arch.tlb_size); 356 357 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE 358 /* 359 * Record allocated tlb_addr in case gd->tlb_addr to be overwritten 360 * with location within secure ram. 361 */ 362 gd->arch.tlb_allocated = gd->arch.tlb_addr; 363 #endif 364 #endif 365 366 return 0; 367 } 368 #endif 369 370 static int reserve_video(void) 371 { 372 #ifdef CONFIG_DM_VIDEO 373 ulong addr; 374 int ret; 375 376 addr = gd->relocaddr; 377 ret = video_reserve(&addr); 378 if (ret) 379 return ret; 380 gd->relocaddr = addr; 381 #elif defined(CONFIG_LCD) 382 # ifdef CONFIG_FB_ADDR 383 gd->fb_base = CONFIG_FB_ADDR; 384 # else 385 /* reserve memory for LCD display (always full pages) */ 386 gd->relocaddr = lcd_setmem(gd->relocaddr); 387 gd->fb_base = gd->relocaddr; 388 # endif /* CONFIG_FB_ADDR */ 389 #elif defined(CONFIG_VIDEO) && \ 390 (!defined(CONFIG_PPC)) && \ 391 !defined(CONFIG_ARM) && !defined(CONFIG_X86) && \ 392 !defined(CONFIG_M68K) 393 /* reserve memory for video display (always full pages) */ 394 gd->relocaddr = video_setmem(gd->relocaddr); 395 gd->fb_base = gd->relocaddr; 396 #endif 397 398 return 0; 399 } 400 401 static int reserve_trace(void) 402 { 403 #ifdef CONFIG_TRACE 404 gd->relocaddr -= CONFIG_TRACE_BUFFER_SIZE; 405 gd->trace_buff = map_sysmem(gd->relocaddr, CONFIG_TRACE_BUFFER_SIZE); 406 debug("Reserving %dk for trace data at: %08lx\n", 407 CONFIG_TRACE_BUFFER_SIZE >> 10, gd->relocaddr); 408 #endif 409 410 return 0; 411 } 412 413 static int reserve_uboot(void) 414 { 415 /* 416 * reserve memory for U-Boot code, data & bss 417 * round down to next 4 kB limit 418 */ 419 gd->relocaddr -= gd->mon_len; 420 gd->relocaddr &= ~(4096 - 1); 421 #if defined(CONFIG_E500) || defined(CONFIG_MIPS) 422 /* round down to next 64 kB limit so that IVPR stays aligned */ 423 gd->relocaddr &= ~(65536 - 1); 424 #endif 425 426 debug("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10, 427 gd->relocaddr); 428 429 gd->start_addr_sp = gd->relocaddr; 430 431 return 0; 432 } 433 434 /* reserve memory for malloc() area */ 435 static int reserve_malloc(void) 436 { 437 gd->start_addr_sp = gd->start_addr_sp - TOTAL_MALLOC_LEN; 438 debug("Reserving %dk for malloc() at: %08lx\n", 439 TOTAL_MALLOC_LEN >> 10, gd->start_addr_sp); 440 return 0; 441 } 442 443 /* (permanently) allocate a Board Info struct */ 444 static int reserve_board(void) 445 { 446 if (!gd->bd) { 447 gd->start_addr_sp -= sizeof(bd_t); 448 gd->bd = (bd_t *)map_sysmem(gd->start_addr_sp, sizeof(bd_t)); 449 memset(gd->bd, '\0', sizeof(bd_t)); 450 debug("Reserving %zu Bytes for Board Info at: %08lx\n", 451 sizeof(bd_t), gd->start_addr_sp); 452 } 453 return 0; 454 } 455 456 static int setup_machine(void) 457 { 458 #ifdef CONFIG_MACH_TYPE 459 gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */ 460 #endif 461 return 0; 462 } 463 464 static int reserve_global_data(void) 465 { 466 gd->start_addr_sp -= sizeof(gd_t); 467 gd->new_gd = (gd_t *)map_sysmem(gd->start_addr_sp, sizeof(gd_t)); 468 debug("Reserving %zu Bytes for Global Data at: %08lx\n", 469 sizeof(gd_t), gd->start_addr_sp); 470 return 0; 471 } 472 473 static int reserve_fdt(void) 474 { 475 #ifndef CONFIG_OF_EMBED 476 /* 477 * If the device tree is sitting immediately above our image then we 478 * must relocate it. If it is embedded in the data section, then it 479 * will be relocated with other data. 480 */ 481 if (gd->fdt_blob) { 482 gd->fdt_size = ALIGN(fdt_totalsize(gd->fdt_blob) + 0x1000, 32); 483 484 gd->start_addr_sp -= gd->fdt_size; 485 gd->new_fdt = map_sysmem(gd->start_addr_sp, gd->fdt_size); 486 debug("Reserving %lu Bytes for FDT at: %08lx\n", 487 gd->fdt_size, gd->start_addr_sp); 488 } 489 #endif 490 491 return 0; 492 } 493 494 static int reserve_bootstage(void) 495 { 496 #ifdef CONFIG_BOOTSTAGE 497 int size = bootstage_get_size(); 498 499 gd->start_addr_sp -= size; 500 gd->new_bootstage = map_sysmem(gd->start_addr_sp, size); 501 debug("Reserving %#x Bytes for bootstage at: %08lx\n", size, 502 gd->start_addr_sp); 503 #endif 504 505 return 0; 506 } 507 508 int arch_reserve_stacks(void) 509 { 510 return 0; 511 } 512 513 static int reserve_stacks(void) 514 { 515 /* make stack pointer 16-byte aligned */ 516 gd->start_addr_sp -= 16; 517 gd->start_addr_sp &= ~0xf; 518 519 /* 520 * let the architecture-specific code tailor gd->start_addr_sp and 521 * gd->irq_sp 522 */ 523 return arch_reserve_stacks(); 524 } 525 526 static int display_new_sp(void) 527 { 528 debug("New Stack Pointer is: %08lx\n", gd->start_addr_sp); 529 530 return 0; 531 } 532 533 #if defined(CONFIG_M68K) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \ 534 defined(CONFIG_SH) 535 static int setup_board_part1(void) 536 { 537 bd_t *bd = gd->bd; 538 539 /* 540 * Save local variables to board info struct 541 */ 542 bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of memory */ 543 bd->bi_memsize = gd->ram_size; /* size in bytes */ 544 545 #ifdef CONFIG_SYS_SRAM_BASE 546 bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; /* start of SRAM */ 547 bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM */ 548 #endif 549 550 #if defined(CONFIG_E500) || defined(CONFIG_MPC86xx) 551 bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */ 552 #endif 553 #if defined(CONFIG_M68K) 554 bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ 555 #endif 556 #if defined(CONFIG_MPC83xx) 557 bd->bi_immrbar = CONFIG_SYS_IMMR; 558 #endif 559 560 return 0; 561 } 562 #endif 563 564 #if defined(CONFIG_PPC) || defined(CONFIG_M68K) 565 static int setup_board_part2(void) 566 { 567 bd_t *bd = gd->bd; 568 569 bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */ 570 bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */ 571 #if defined(CONFIG_CPM2) 572 bd->bi_cpmfreq = gd->arch.cpm_clk; 573 bd->bi_brgfreq = gd->arch.brg_clk; 574 bd->bi_sccfreq = gd->arch.scc_clk; 575 bd->bi_vco = gd->arch.vco_out; 576 #endif /* CONFIG_CPM2 */ 577 #if defined(CONFIG_M68K) && defined(CONFIG_PCI) 578 bd->bi_pcifreq = gd->pci_clk; 579 #endif 580 #if defined(CONFIG_EXTRA_CLOCK) 581 bd->bi_inpfreq = gd->arch.inp_clk; /* input Freq in Hz */ 582 bd->bi_vcofreq = gd->arch.vco_clk; /* vco Freq in Hz */ 583 bd->bi_flbfreq = gd->arch.flb_clk; /* flexbus Freq in Hz */ 584 #endif 585 586 return 0; 587 } 588 #endif 589 590 #ifdef CONFIG_POST 591 static int init_post(void) 592 { 593 post_bootmode_init(); 594 post_run(NULL, POST_ROM | post_bootmode_get(0)); 595 596 return 0; 597 } 598 #endif 599 600 static int reloc_fdt(void) 601 { 602 #ifndef CONFIG_OF_EMBED 603 if (gd->flags & GD_FLG_SKIP_RELOC) 604 return 0; 605 if (gd->new_fdt) { 606 memcpy(gd->new_fdt, gd->fdt_blob, gd->fdt_size); 607 gd->fdt_blob = gd->new_fdt; 608 } 609 #endif 610 611 return 0; 612 } 613 614 static int reloc_bootstage(void) 615 { 616 #ifdef CONFIG_BOOTSTAGE 617 if (gd->flags & GD_FLG_SKIP_RELOC) 618 return 0; 619 if (gd->new_bootstage) { 620 int size = bootstage_get_size(); 621 622 debug("Copying bootstage from %p to %p, size %x\n", 623 gd->bootstage, gd->new_bootstage, size); 624 memcpy(gd->new_bootstage, gd->bootstage, size); 625 gd->bootstage = gd->new_bootstage; 626 } 627 #endif 628 629 return 0; 630 } 631 632 static int setup_reloc(void) 633 { 634 if (gd->flags & GD_FLG_SKIP_RELOC) { 635 debug("Skipping relocation due to flag\n"); 636 return 0; 637 } 638 639 #ifdef CONFIG_SYS_TEXT_BASE 640 #ifdef ARM 641 gd->reloc_off = gd->relocaddr - (unsigned long)__image_copy_start; 642 #elif defined(CONFIG_M68K) 643 /* 644 * On all ColdFire arch cpu, monitor code starts always 645 * just after the default vector table location, so at 0x400 646 */ 647 gd->reloc_off = gd->relocaddr - (CONFIG_SYS_TEXT_BASE + 0x400); 648 #else 649 gd->reloc_off = gd->relocaddr - CONFIG_SYS_TEXT_BASE; 650 #endif 651 #endif 652 memcpy(gd->new_gd, (char *)gd, sizeof(gd_t)); 653 654 debug("Relocation Offset is: %08lx\n", gd->reloc_off); 655 debug("Relocating to %08lx, new gd at %08lx, sp at %08lx\n", 656 gd->relocaddr, (ulong)map_to_sysmem(gd->new_gd), 657 gd->start_addr_sp); 658 659 return 0; 660 } 661 662 #ifdef CONFIG_OF_BOARD_FIXUP 663 static int fix_fdt(void) 664 { 665 return board_fix_fdt((void *)gd->fdt_blob); 666 } 667 #endif 668 669 /* ARM calls relocate_code from its crt0.S */ 670 #if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) && \ 671 !CONFIG_IS_ENABLED(X86_64) 672 673 static int jump_to_copy(void) 674 { 675 if (gd->flags & GD_FLG_SKIP_RELOC) 676 return 0; 677 /* 678 * x86 is special, but in a nice way. It uses a trampoline which 679 * enables the dcache if possible. 680 * 681 * For now, other archs use relocate_code(), which is implemented 682 * similarly for all archs. When we do generic relocation, hopefully 683 * we can make all archs enable the dcache prior to relocation. 684 */ 685 #if defined(CONFIG_X86) || defined(CONFIG_ARC) 686 /* 687 * SDRAM and console are now initialised. The final stack can now 688 * be setup in SDRAM. Code execution will continue in Flash, but 689 * with the stack in SDRAM and Global Data in temporary memory 690 * (CPU cache) 691 */ 692 arch_setup_gd(gd->new_gd); 693 board_init_f_r_trampoline(gd->start_addr_sp); 694 #else 695 relocate_code(gd->start_addr_sp, gd->new_gd, gd->relocaddr); 696 #endif 697 698 return 0; 699 } 700 #endif 701 702 /* Record the board_init_f() bootstage (after arch_cpu_init()) */ 703 static int initf_bootstage(void) 704 { 705 bool from_spl = IS_ENABLED(CONFIG_SPL_BOOTSTAGE) && 706 IS_ENABLED(CONFIG_BOOTSTAGE_STASH); 707 int ret; 708 709 ret = bootstage_init(!from_spl); 710 if (ret) 711 return ret; 712 if (from_spl) { 713 const void *stash = map_sysmem(CONFIG_BOOTSTAGE_STASH_ADDR, 714 CONFIG_BOOTSTAGE_STASH_SIZE); 715 716 ret = bootstage_unstash(stash, CONFIG_BOOTSTAGE_STASH_SIZE); 717 if (ret && ret != -ENOENT) { 718 debug("Failed to unstash bootstage: err=%d\n", ret); 719 return ret; 720 } 721 } 722 723 bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f"); 724 725 return 0; 726 } 727 728 static int initf_console_record(void) 729 { 730 #if defined(CONFIG_CONSOLE_RECORD) && CONFIG_VAL(SYS_MALLOC_F_LEN) 731 return console_record_init(); 732 #else 733 return 0; 734 #endif 735 } 736 737 static int initf_dm(void) 738 { 739 #if defined(CONFIG_DM) && CONFIG_VAL(SYS_MALLOC_F_LEN) 740 int ret; 741 742 bootstage_start(BOOTSTATE_ID_ACCUM_DM_F, "dm_f"); 743 ret = dm_init_and_scan(true); 744 bootstage_accum(BOOTSTATE_ID_ACCUM_DM_F); 745 if (ret) 746 return ret; 747 #endif 748 #ifdef CONFIG_TIMER_EARLY 749 ret = dm_timer_init(); 750 if (ret) 751 return ret; 752 #endif 753 754 return 0; 755 } 756 757 /* Architecture-specific memory reservation */ 758 __weak int reserve_arch(void) 759 { 760 return 0; 761 } 762 763 __weak int arch_cpu_init_dm(void) 764 { 765 return 0; 766 } 767 768 static const init_fnc_t init_sequence_f[] = { 769 setup_mon_len, 770 #ifdef CONFIG_OF_CONTROL 771 fdtdec_setup, 772 #endif 773 #ifdef CONFIG_TRACE 774 trace_early_init, 775 #endif 776 initf_malloc, 777 initf_bootstage, /* uses its own timer, so does not need DM */ 778 initf_console_record, 779 #if defined(CONFIG_HAVE_FSP) 780 arch_fsp_init, 781 #endif 782 arch_cpu_init, /* basic arch cpu dependent setup */ 783 mach_cpu_init, /* SoC/machine dependent CPU setup */ 784 initf_dm, 785 arch_cpu_init_dm, 786 #if defined(CONFIG_BOARD_EARLY_INIT_F) 787 board_early_init_f, 788 #endif 789 #if defined(CONFIG_PPC) || defined(CONFIG_SYS_FSL_CLK) || defined(CONFIG_M68K) 790 /* get CPU and bus clocks according to the environment variable */ 791 get_clocks, /* get CPU and bus clocks (etc.) */ 792 #endif 793 #if !defined(CONFIG_M68K) 794 timer_init, /* initialize timer */ 795 #endif 796 #if defined(CONFIG_BOARD_POSTCLK_INIT) 797 board_postclk_init, 798 #endif 799 env_init, /* initialize environment */ 800 init_baud_rate, /* initialze baudrate settings */ 801 serial_init, /* serial communications setup */ 802 console_init_f, /* stage 1 init of console */ 803 display_options, /* say that we are here */ 804 display_text_info, /* show debugging info if required */ 805 #if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SH) || \ 806 defined(CONFIG_X86) 807 checkcpu, 808 #endif 809 #if defined(CONFIG_DISPLAY_CPUINFO) 810 print_cpuinfo, /* display cpu info (and speed) */ 811 #endif 812 #if defined(CONFIG_DTB_RESELECT) 813 embedded_dtb_select, 814 #endif 815 #if defined(CONFIG_DISPLAY_BOARDINFO) 816 show_board_info, 817 #endif 818 INIT_FUNC_WATCHDOG_INIT 819 #if defined(CONFIG_MISC_INIT_F) 820 misc_init_f, 821 #endif 822 INIT_FUNC_WATCHDOG_RESET 823 #if defined(CONFIG_SYS_I2C) 824 init_func_i2c, 825 #endif 826 #if defined(CONFIG_HARD_SPI) 827 init_func_spi, 828 #endif 829 announce_dram_init, 830 dram_init, /* configure available RAM banks */ 831 #ifdef CONFIG_POST 832 post_init_f, 833 #endif 834 INIT_FUNC_WATCHDOG_RESET 835 #if defined(CONFIG_SYS_DRAM_TEST) 836 testdram, 837 #endif /* CONFIG_SYS_DRAM_TEST */ 838 INIT_FUNC_WATCHDOG_RESET 839 840 #ifdef CONFIG_POST 841 init_post, 842 #endif 843 INIT_FUNC_WATCHDOG_RESET 844 /* 845 * Now that we have DRAM mapped and working, we can 846 * relocate the code and continue running from DRAM. 847 * 848 * Reserve memory at end of RAM for (top down in that order): 849 * - area that won't get touched by U-Boot and Linux (optional) 850 * - kernel log buffer 851 * - protected RAM 852 * - LCD framebuffer 853 * - monitor code 854 * - board info struct 855 */ 856 setup_dest_addr, 857 #if defined(CONFIG_LOGBUFFER) 858 reserve_logbuffer, 859 #endif 860 #ifdef CONFIG_PRAM 861 reserve_pram, 862 #endif 863 reserve_round_4k, 864 #ifdef CONFIG_ARM 865 reserve_mmu, 866 #endif 867 reserve_video, 868 reserve_trace, 869 reserve_uboot, 870 reserve_malloc, 871 reserve_board, 872 setup_machine, 873 reserve_global_data, 874 reserve_fdt, 875 reserve_bootstage, 876 reserve_arch, 877 reserve_stacks, 878 dram_init_banksize, 879 show_dram_config, 880 #if defined(CONFIG_M68K) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \ 881 defined(CONFIG_SH) 882 setup_board_part1, 883 #endif 884 #if defined(CONFIG_PPC) || defined(CONFIG_M68K) 885 INIT_FUNC_WATCHDOG_RESET 886 setup_board_part2, 887 #endif 888 display_new_sp, 889 #ifdef CONFIG_OF_BOARD_FIXUP 890 fix_fdt, 891 #endif 892 INIT_FUNC_WATCHDOG_RESET 893 reloc_fdt, 894 reloc_bootstage, 895 setup_reloc, 896 #if defined(CONFIG_X86) || defined(CONFIG_ARC) 897 copy_uboot_to_ram, 898 do_elf_reloc_fixups, 899 clear_bss, 900 #endif 901 #if defined(CONFIG_XTENSA) 902 clear_bss, 903 #endif 904 #if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) && \ 905 !CONFIG_IS_ENABLED(X86_64) 906 jump_to_copy, 907 #endif 908 NULL, 909 }; 910 911 void board_init_f(ulong boot_flags) 912 { 913 #ifdef CONFIG_SYS_GENERIC_GLOBAL_DATA 914 /* 915 * For some architectures, global data is initialized and used before 916 * calling this function. The data should be preserved. For others, 917 * CONFIG_SYS_GENERIC_GLOBAL_DATA should be defined and use the stack 918 * here to host global data until relocation. 919 */ 920 gd_t data; 921 922 gd = &data; 923 924 /* 925 * Clear global data before it is accessed at debug print 926 * in initcall_run_list. Otherwise the debug print probably 927 * get the wrong value of gd->have_console. 928 */ 929 zero_global_data(); 930 #endif 931 932 gd->flags = boot_flags; 933 gd->have_console = 0; 934 935 if (initcall_run_list(init_sequence_f)) 936 hang(); 937 938 #if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) && \ 939 !defined(CONFIG_EFI_APP) && !CONFIG_IS_ENABLED(X86_64) 940 /* NOTREACHED - jump_to_copy() does not return */ 941 hang(); 942 #endif 943 } 944 945 #if defined(CONFIG_X86) || defined(CONFIG_ARC) 946 /* 947 * For now this code is only used on x86. 948 * 949 * init_sequence_f_r is the list of init functions which are run when 950 * U-Boot is executing from Flash with a semi-limited 'C' environment. 951 * The following limitations must be considered when implementing an 952 * '_f_r' function: 953 * - 'static' variables are read-only 954 * - Global Data (gd->xxx) is read/write 955 * 956 * The '_f_r' sequence must, as a minimum, copy U-Boot to RAM (if 957 * supported). It _should_, if possible, copy global data to RAM and 958 * initialise the CPU caches (to speed up the relocation process) 959 * 960 * NOTE: At present only x86 uses this route, but it is intended that 961 * all archs will move to this when generic relocation is implemented. 962 */ 963 static const init_fnc_t init_sequence_f_r[] = { 964 #if !CONFIG_IS_ENABLED(X86_64) 965 init_cache_f_r, 966 #endif 967 968 NULL, 969 }; 970 971 void board_init_f_r(void) 972 { 973 if (initcall_run_list(init_sequence_f_r)) 974 hang(); 975 976 /* 977 * The pre-relocation drivers may be using memory that has now gone 978 * away. Mark serial as unavailable - this will fall back to the debug 979 * UART if available. 980 */ 981 gd->flags &= ~GD_FLG_SERIAL_READY; 982 983 /* 984 * U-Boot has been copied into SDRAM, the BSS has been cleared etc. 985 * Transfer execution from Flash to RAM by calculating the address 986 * of the in-RAM copy of board_init_r() and calling it 987 */ 988 (board_init_r + gd->reloc_off)((gd_t *)gd, gd->relocaddr); 989 990 /* NOTREACHED - board_init_r() does not return */ 991 hang(); 992 } 993 #endif /* CONFIG_X86 */ 994