1 /* 2 * Copyright (c) 2011 The Chromium OS Authors. 3 * (C) Copyright 2002-2006 4 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 5 * 6 * (C) Copyright 2002 7 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> 8 * Marius Groeger <mgroeger@sysgo.de> 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #include <common.h> 14 #include <console.h> 15 #include <environment.h> 16 #include <dm.h> 17 #include <fdtdec.h> 18 #include <fs.h> 19 #include <i2c.h> 20 #include <initcall.h> 21 #include <init_helpers.h> 22 #include <malloc.h> 23 #include <mapmem.h> 24 #include <os.h> 25 #include <post.h> 26 #include <relocate.h> 27 #include <spi.h> 28 #include <status_led.h> 29 #include <timer.h> 30 #include <trace.h> 31 #include <video.h> 32 #include <watchdog.h> 33 #ifdef CONFIG_MACH_TYPE 34 #include <asm/mach-types.h> 35 #endif 36 #if defined(CONFIG_MP) && defined(CONFIG_PPC) 37 #include <asm/mp.h> 38 #endif 39 #include <asm/io.h> 40 #include <asm/sections.h> 41 #include <dm/root.h> 42 #include <linux/errno.h> 43 44 /* 45 * Pointer to initial global data area 46 * 47 * Here we initialize it if needed. 48 */ 49 #ifdef XTRN_DECLARE_GLOBAL_DATA_PTR 50 #undef XTRN_DECLARE_GLOBAL_DATA_PTR 51 #define XTRN_DECLARE_GLOBAL_DATA_PTR /* empty = allocate here */ 52 DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CONFIG_SYS_INIT_GD_ADDR); 53 #else 54 DECLARE_GLOBAL_DATA_PTR; 55 #endif 56 57 /* 58 * TODO(sjg@chromium.org): IMO this code should be 59 * refactored to a single function, something like: 60 * 61 * void led_set_state(enum led_colour_t colour, int on); 62 */ 63 /************************************************************************ 64 * Coloured LED functionality 65 ************************************************************************ 66 * May be supplied by boards if desired 67 */ 68 __weak void coloured_LED_init(void) {} 69 __weak void red_led_on(void) {} 70 __weak void red_led_off(void) {} 71 __weak void green_led_on(void) {} 72 __weak void green_led_off(void) {} 73 __weak void yellow_led_on(void) {} 74 __weak void yellow_led_off(void) {} 75 __weak void blue_led_on(void) {} 76 __weak void blue_led_off(void) {} 77 78 /* 79 * Why is gd allocated a register? Prior to reloc it might be better to 80 * just pass it around to each function in this file? 81 * 82 * After reloc one could argue that it is hardly used and doesn't need 83 * to be in a register. Or if it is it should perhaps hold pointers to all 84 * global data for all modules, so that post-reloc we can avoid the massive 85 * literal pool we get on ARM. Or perhaps just encourage each module to use 86 * a structure... 87 */ 88 89 #if defined(CONFIG_WATCHDOG) || defined(CONFIG_HW_WATCHDOG) 90 static int init_func_watchdog_init(void) 91 { 92 # if defined(CONFIG_HW_WATCHDOG) && \ 93 (defined(CONFIG_M68K) || defined(CONFIG_MICROBLAZE) || \ 94 defined(CONFIG_SH) || defined(CONFIG_AT91SAM9_WATCHDOG) || \ 95 defined(CONFIG_DESIGNWARE_WATCHDOG) || \ 96 defined(CONFIG_IMX_WATCHDOG)) 97 hw_watchdog_init(); 98 puts(" Watchdog enabled\n"); 99 # endif 100 WATCHDOG_RESET(); 101 102 return 0; 103 } 104 105 int init_func_watchdog_reset(void) 106 { 107 WATCHDOG_RESET(); 108 109 return 0; 110 } 111 #endif /* CONFIG_WATCHDOG */ 112 113 __weak void board_add_ram_info(int use_default) 114 { 115 /* please define platform specific board_add_ram_info() */ 116 } 117 118 static int init_baud_rate(void) 119 { 120 gd->baudrate = env_get_ulong("baudrate", 10, CONFIG_BAUDRATE); 121 return 0; 122 } 123 124 static int display_text_info(void) 125 { 126 #if !defined(CONFIG_SANDBOX) && !defined(CONFIG_EFI_APP) 127 ulong bss_start, bss_end, text_base; 128 129 bss_start = (ulong)&__bss_start; 130 bss_end = (ulong)&__bss_end; 131 132 #ifdef CONFIG_SYS_TEXT_BASE 133 text_base = CONFIG_SYS_TEXT_BASE; 134 #else 135 text_base = CONFIG_SYS_MONITOR_BASE; 136 #endif 137 138 debug("U-Boot code: %08lX -> %08lX BSS: -> %08lX\n", 139 text_base, bss_start, bss_end); 140 #endif 141 142 return 0; 143 } 144 145 static int announce_dram_init(void) 146 { 147 puts("DRAM: "); 148 return 0; 149 } 150 151 static int show_dram_config(void) 152 { 153 unsigned long long size; 154 155 #ifdef CONFIG_NR_DRAM_BANKS 156 int i; 157 158 debug("\nRAM Configuration:\n"); 159 for (i = size = 0; i < CONFIG_NR_DRAM_BANKS; i++) { 160 size += gd->bd->bi_dram[i].size; 161 debug("Bank #%d: %llx ", i, 162 (unsigned long long)(gd->bd->bi_dram[i].start)); 163 #ifdef DEBUG 164 print_size(gd->bd->bi_dram[i].size, "\n"); 165 #endif 166 } 167 debug("\nDRAM: "); 168 #else 169 size = gd->ram_size; 170 #endif 171 172 print_size(size, ""); 173 board_add_ram_info(0); 174 putc('\n'); 175 176 return 0; 177 } 178 179 __weak int dram_init_banksize(void) 180 { 181 #if defined(CONFIG_NR_DRAM_BANKS) && defined(CONFIG_SYS_SDRAM_BASE) 182 gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; 183 gd->bd->bi_dram[0].size = get_effective_memsize(); 184 #endif 185 186 return 0; 187 } 188 189 #if defined(CONFIG_SYS_I2C) 190 static int init_func_i2c(void) 191 { 192 puts("I2C: "); 193 #ifdef CONFIG_SYS_I2C 194 i2c_init_all(); 195 #else 196 i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); 197 #endif 198 puts("ready\n"); 199 return 0; 200 } 201 #endif 202 203 #if defined(CONFIG_HARD_SPI) 204 static int init_func_spi(void) 205 { 206 puts("SPI: "); 207 spi_init(); 208 puts("ready\n"); 209 return 0; 210 } 211 #endif 212 213 static int setup_mon_len(void) 214 { 215 #if defined(__ARM__) || defined(__MICROBLAZE__) 216 gd->mon_len = (ulong)&__bss_end - (ulong)_start; 217 #elif defined(CONFIG_SANDBOX) || defined(CONFIG_EFI_APP) 218 gd->mon_len = (ulong)&_end - (ulong)_init; 219 #elif defined(CONFIG_NIOS2) || defined(CONFIG_XTENSA) 220 gd->mon_len = CONFIG_SYS_MONITOR_LEN; 221 #elif defined(CONFIG_NDS32) || defined(CONFIG_SH) 222 gd->mon_len = (ulong)(&__bss_end) - (ulong)(&_start); 223 #elif defined(CONFIG_SYS_MONITOR_BASE) 224 /* TODO: use (ulong)&__bss_end - (ulong)&__text_start; ? */ 225 gd->mon_len = (ulong)&__bss_end - CONFIG_SYS_MONITOR_BASE; 226 #endif 227 return 0; 228 } 229 230 __weak int arch_cpu_init(void) 231 { 232 return 0; 233 } 234 235 __weak int mach_cpu_init(void) 236 { 237 return 0; 238 } 239 240 /* Get the top of usable RAM */ 241 __weak ulong board_get_usable_ram_top(ulong total_size) 242 { 243 #ifdef CONFIG_SYS_SDRAM_BASE 244 /* 245 * Detect whether we have so much RAM that it goes past the end of our 246 * 32-bit address space. If so, clip the usable RAM so it doesn't. 247 */ 248 if (gd->ram_top < CONFIG_SYS_SDRAM_BASE) 249 /* 250 * Will wrap back to top of 32-bit space when reservations 251 * are made. 252 */ 253 return 0; 254 #endif 255 return gd->ram_top; 256 } 257 258 static int setup_dest_addr(void) 259 { 260 debug("Monitor len: %08lX\n", gd->mon_len); 261 /* 262 * Ram is setup, size stored in gd !! 263 */ 264 debug("Ram size: %08lX\n", (ulong)gd->ram_size); 265 #if defined(CONFIG_SYS_MEM_TOP_HIDE) 266 /* 267 * Subtract specified amount of memory to hide so that it won't 268 * get "touched" at all by U-Boot. By fixing up gd->ram_size 269 * the Linux kernel should now get passed the now "corrected" 270 * memory size and won't touch it either. This should work 271 * for arch/ppc and arch/powerpc. Only Linux board ports in 272 * arch/powerpc with bootwrapper support, that recalculate the 273 * memory size from the SDRAM controller setup will have to 274 * get fixed. 275 */ 276 gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE; 277 #endif 278 #ifdef CONFIG_SYS_SDRAM_BASE 279 gd->ram_top = CONFIG_SYS_SDRAM_BASE; 280 #endif 281 gd->ram_top += get_effective_memsize(); 282 gd->ram_top = board_get_usable_ram_top(gd->mon_len); 283 gd->relocaddr = gd->ram_top; 284 debug("Ram top: %08lX\n", (ulong)gd->ram_top); 285 #if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500)) 286 /* 287 * We need to make sure the location we intend to put secondary core 288 * boot code is reserved and not used by any part of u-boot 289 */ 290 if (gd->relocaddr > determine_mp_bootpg(NULL)) { 291 gd->relocaddr = determine_mp_bootpg(NULL); 292 debug("Reserving MP boot page to %08lx\n", gd->relocaddr); 293 } 294 #endif 295 return 0; 296 } 297 298 #ifdef CONFIG_PRAM 299 /* reserve protected RAM */ 300 static int reserve_pram(void) 301 { 302 ulong reg; 303 304 reg = env_get_ulong("pram", 10, CONFIG_PRAM); 305 gd->relocaddr -= (reg << 10); /* size is in kB */ 306 debug("Reserving %ldk for protected RAM at %08lx\n", reg, 307 gd->relocaddr); 308 return 0; 309 } 310 #endif /* CONFIG_PRAM */ 311 312 /* Round memory pointer down to next 4 kB limit */ 313 static int reserve_round_4k(void) 314 { 315 gd->relocaddr &= ~(4096 - 1); 316 return 0; 317 } 318 319 #ifdef CONFIG_ARM 320 __weak int reserve_mmu(void) 321 { 322 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) 323 /* reserve TLB table */ 324 gd->arch.tlb_size = PGTABLE_SIZE; 325 gd->relocaddr -= gd->arch.tlb_size; 326 327 /* round down to next 64 kB limit */ 328 gd->relocaddr &= ~(0x10000 - 1); 329 330 gd->arch.tlb_addr = gd->relocaddr; 331 debug("TLB table from %08lx to %08lx\n", gd->arch.tlb_addr, 332 gd->arch.tlb_addr + gd->arch.tlb_size); 333 334 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE 335 /* 336 * Record allocated tlb_addr in case gd->tlb_addr to be overwritten 337 * with location within secure ram. 338 */ 339 gd->arch.tlb_allocated = gd->arch.tlb_addr; 340 #endif 341 #endif 342 343 return 0; 344 } 345 #endif 346 347 static int reserve_video(void) 348 { 349 #ifdef CONFIG_DM_VIDEO 350 ulong addr; 351 int ret; 352 353 addr = gd->relocaddr; 354 ret = video_reserve(&addr); 355 if (ret) 356 return ret; 357 gd->relocaddr = addr; 358 #elif defined(CONFIG_LCD) 359 # ifdef CONFIG_FB_ADDR 360 gd->fb_base = CONFIG_FB_ADDR; 361 # else 362 /* reserve memory for LCD display (always full pages) */ 363 gd->relocaddr = lcd_setmem(gd->relocaddr); 364 gd->fb_base = gd->relocaddr; 365 # endif /* CONFIG_FB_ADDR */ 366 #elif defined(CONFIG_VIDEO) && \ 367 (!defined(CONFIG_PPC)) && \ 368 !defined(CONFIG_ARM) && !defined(CONFIG_X86) && \ 369 !defined(CONFIG_M68K) 370 /* reserve memory for video display (always full pages) */ 371 gd->relocaddr = video_setmem(gd->relocaddr); 372 gd->fb_base = gd->relocaddr; 373 #endif 374 375 return 0; 376 } 377 378 static int reserve_trace(void) 379 { 380 #ifdef CONFIG_TRACE 381 gd->relocaddr -= CONFIG_TRACE_BUFFER_SIZE; 382 gd->trace_buff = map_sysmem(gd->relocaddr, CONFIG_TRACE_BUFFER_SIZE); 383 debug("Reserving %dk for trace data at: %08lx\n", 384 CONFIG_TRACE_BUFFER_SIZE >> 10, gd->relocaddr); 385 #endif 386 387 return 0; 388 } 389 390 static int reserve_uboot(void) 391 { 392 /* 393 * reserve memory for U-Boot code, data & bss 394 * round down to next 4 kB limit 395 */ 396 gd->relocaddr -= gd->mon_len; 397 gd->relocaddr &= ~(4096 - 1); 398 #if defined(CONFIG_E500) || defined(CONFIG_MIPS) 399 /* round down to next 64 kB limit so that IVPR stays aligned */ 400 gd->relocaddr &= ~(65536 - 1); 401 #endif 402 403 debug("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10, 404 gd->relocaddr); 405 406 gd->start_addr_sp = gd->relocaddr; 407 408 return 0; 409 } 410 411 /* reserve memory for malloc() area */ 412 static int reserve_malloc(void) 413 { 414 gd->start_addr_sp = gd->start_addr_sp - TOTAL_MALLOC_LEN; 415 debug("Reserving %dk for malloc() at: %08lx\n", 416 TOTAL_MALLOC_LEN >> 10, gd->start_addr_sp); 417 return 0; 418 } 419 420 /* (permanently) allocate a Board Info struct */ 421 static int reserve_board(void) 422 { 423 if (!gd->bd) { 424 gd->start_addr_sp -= sizeof(bd_t); 425 gd->bd = (bd_t *)map_sysmem(gd->start_addr_sp, sizeof(bd_t)); 426 memset(gd->bd, '\0', sizeof(bd_t)); 427 debug("Reserving %zu Bytes for Board Info at: %08lx\n", 428 sizeof(bd_t), gd->start_addr_sp); 429 } 430 return 0; 431 } 432 433 static int setup_machine(void) 434 { 435 #ifdef CONFIG_MACH_TYPE 436 gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */ 437 #endif 438 return 0; 439 } 440 441 static int reserve_global_data(void) 442 { 443 gd->start_addr_sp -= sizeof(gd_t); 444 gd->new_gd = (gd_t *)map_sysmem(gd->start_addr_sp, sizeof(gd_t)); 445 debug("Reserving %zu Bytes for Global Data at: %08lx\n", 446 sizeof(gd_t), gd->start_addr_sp); 447 return 0; 448 } 449 450 static int reserve_fdt(void) 451 { 452 #ifndef CONFIG_OF_EMBED 453 /* 454 * If the device tree is sitting immediately above our image then we 455 * must relocate it. If it is embedded in the data section, then it 456 * will be relocated with other data. 457 */ 458 if (gd->fdt_blob) { 459 gd->fdt_size = ALIGN(fdt_totalsize(gd->fdt_blob) + 0x1000, 32); 460 461 gd->start_addr_sp -= gd->fdt_size; 462 gd->new_fdt = map_sysmem(gd->start_addr_sp, gd->fdt_size); 463 debug("Reserving %lu Bytes for FDT at: %08lx\n", 464 gd->fdt_size, gd->start_addr_sp); 465 } 466 #endif 467 468 return 0; 469 } 470 471 static int reserve_bootstage(void) 472 { 473 #ifdef CONFIG_BOOTSTAGE 474 int size = bootstage_get_size(); 475 476 gd->start_addr_sp -= size; 477 gd->new_bootstage = map_sysmem(gd->start_addr_sp, size); 478 debug("Reserving %#x Bytes for bootstage at: %08lx\n", size, 479 gd->start_addr_sp); 480 #endif 481 482 return 0; 483 } 484 485 int arch_reserve_stacks(void) 486 { 487 return 0; 488 } 489 490 static int reserve_stacks(void) 491 { 492 /* make stack pointer 16-byte aligned */ 493 gd->start_addr_sp -= 16; 494 gd->start_addr_sp &= ~0xf; 495 496 /* 497 * let the architecture-specific code tailor gd->start_addr_sp and 498 * gd->irq_sp 499 */ 500 return arch_reserve_stacks(); 501 } 502 503 static int display_new_sp(void) 504 { 505 debug("New Stack Pointer is: %08lx\n", gd->start_addr_sp); 506 507 return 0; 508 } 509 510 #if defined(CONFIG_M68K) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \ 511 defined(CONFIG_SH) 512 static int setup_board_part1(void) 513 { 514 bd_t *bd = gd->bd; 515 516 /* 517 * Save local variables to board info struct 518 */ 519 bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of memory */ 520 bd->bi_memsize = gd->ram_size; /* size in bytes */ 521 522 #ifdef CONFIG_SYS_SRAM_BASE 523 bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; /* start of SRAM */ 524 bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM */ 525 #endif 526 527 #if defined(CONFIG_E500) || defined(CONFIG_MPC86xx) 528 bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */ 529 #endif 530 #if defined(CONFIG_M68K) 531 bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ 532 #endif 533 #if defined(CONFIG_MPC83xx) 534 bd->bi_immrbar = CONFIG_SYS_IMMR; 535 #endif 536 537 return 0; 538 } 539 #endif 540 541 #if defined(CONFIG_PPC) || defined(CONFIG_M68K) 542 static int setup_board_part2(void) 543 { 544 bd_t *bd = gd->bd; 545 546 bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */ 547 bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */ 548 #if defined(CONFIG_CPM2) 549 bd->bi_cpmfreq = gd->arch.cpm_clk; 550 bd->bi_brgfreq = gd->arch.brg_clk; 551 bd->bi_sccfreq = gd->arch.scc_clk; 552 bd->bi_vco = gd->arch.vco_out; 553 #endif /* CONFIG_CPM2 */ 554 #if defined(CONFIG_M68K) && defined(CONFIG_PCI) 555 bd->bi_pcifreq = gd->pci_clk; 556 #endif 557 #if defined(CONFIG_EXTRA_CLOCK) 558 bd->bi_inpfreq = gd->arch.inp_clk; /* input Freq in Hz */ 559 bd->bi_vcofreq = gd->arch.vco_clk; /* vco Freq in Hz */ 560 bd->bi_flbfreq = gd->arch.flb_clk; /* flexbus Freq in Hz */ 561 #endif 562 563 return 0; 564 } 565 #endif 566 567 #ifdef CONFIG_POST 568 static int init_post(void) 569 { 570 post_bootmode_init(); 571 post_run(NULL, POST_ROM | post_bootmode_get(0)); 572 573 return 0; 574 } 575 #endif 576 577 static int reloc_fdt(void) 578 { 579 #ifndef CONFIG_OF_EMBED 580 if (gd->flags & GD_FLG_SKIP_RELOC) 581 return 0; 582 if (gd->new_fdt) { 583 memcpy(gd->new_fdt, gd->fdt_blob, gd->fdt_size); 584 gd->fdt_blob = gd->new_fdt; 585 } 586 #endif 587 588 return 0; 589 } 590 591 static int reloc_bootstage(void) 592 { 593 #ifdef CONFIG_BOOTSTAGE 594 if (gd->flags & GD_FLG_SKIP_RELOC) 595 return 0; 596 if (gd->new_bootstage) { 597 int size = bootstage_get_size(); 598 599 debug("Copying bootstage from %p to %p, size %x\n", 600 gd->bootstage, gd->new_bootstage, size); 601 memcpy(gd->new_bootstage, gd->bootstage, size); 602 gd->bootstage = gd->new_bootstage; 603 } 604 #endif 605 606 return 0; 607 } 608 609 static int setup_reloc(void) 610 { 611 if (gd->flags & GD_FLG_SKIP_RELOC) { 612 debug("Skipping relocation due to flag\n"); 613 return 0; 614 } 615 616 #ifdef CONFIG_SYS_TEXT_BASE 617 #ifdef ARM 618 gd->reloc_off = gd->relocaddr - (unsigned long)__image_copy_start; 619 #elif defined(CONFIG_M68K) 620 /* 621 * On all ColdFire arch cpu, monitor code starts always 622 * just after the default vector table location, so at 0x400 623 */ 624 gd->reloc_off = gd->relocaddr - (CONFIG_SYS_TEXT_BASE + 0x400); 625 #else 626 gd->reloc_off = gd->relocaddr - CONFIG_SYS_TEXT_BASE; 627 #endif 628 #endif 629 memcpy(gd->new_gd, (char *)gd, sizeof(gd_t)); 630 631 debug("Relocation Offset is: %08lx\n", gd->reloc_off); 632 debug("Relocating to %08lx, new gd at %08lx, sp at %08lx\n", 633 gd->relocaddr, (ulong)map_to_sysmem(gd->new_gd), 634 gd->start_addr_sp); 635 636 return 0; 637 } 638 639 #ifdef CONFIG_OF_BOARD_FIXUP 640 static int fix_fdt(void) 641 { 642 return board_fix_fdt((void *)gd->fdt_blob); 643 } 644 #endif 645 646 /* ARM calls relocate_code from its crt0.S */ 647 #if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) && \ 648 !CONFIG_IS_ENABLED(X86_64) 649 650 static int jump_to_copy(void) 651 { 652 if (gd->flags & GD_FLG_SKIP_RELOC) 653 return 0; 654 /* 655 * x86 is special, but in a nice way. It uses a trampoline which 656 * enables the dcache if possible. 657 * 658 * For now, other archs use relocate_code(), which is implemented 659 * similarly for all archs. When we do generic relocation, hopefully 660 * we can make all archs enable the dcache prior to relocation. 661 */ 662 #if defined(CONFIG_X86) || defined(CONFIG_ARC) 663 /* 664 * SDRAM and console are now initialised. The final stack can now 665 * be setup in SDRAM. Code execution will continue in Flash, but 666 * with the stack in SDRAM and Global Data in temporary memory 667 * (CPU cache) 668 */ 669 arch_setup_gd(gd->new_gd); 670 board_init_f_r_trampoline(gd->start_addr_sp); 671 #else 672 relocate_code(gd->start_addr_sp, gd->new_gd, gd->relocaddr); 673 #endif 674 675 return 0; 676 } 677 #endif 678 679 /* Record the board_init_f() bootstage (after arch_cpu_init()) */ 680 static int initf_bootstage(void) 681 { 682 bool from_spl = IS_ENABLED(CONFIG_SPL_BOOTSTAGE) && 683 IS_ENABLED(CONFIG_BOOTSTAGE_STASH); 684 int ret; 685 686 ret = bootstage_init(!from_spl); 687 if (ret) 688 return ret; 689 if (from_spl) { 690 const void *stash = map_sysmem(CONFIG_BOOTSTAGE_STASH_ADDR, 691 CONFIG_BOOTSTAGE_STASH_SIZE); 692 693 ret = bootstage_unstash(stash, CONFIG_BOOTSTAGE_STASH_SIZE); 694 if (ret && ret != -ENOENT) { 695 debug("Failed to unstash bootstage: err=%d\n", ret); 696 return ret; 697 } 698 } 699 700 bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f"); 701 702 return 0; 703 } 704 705 static int initf_console_record(void) 706 { 707 #if defined(CONFIG_CONSOLE_RECORD) && CONFIG_VAL(SYS_MALLOC_F_LEN) 708 return console_record_init(); 709 #else 710 return 0; 711 #endif 712 } 713 714 static int initf_dm(void) 715 { 716 #if defined(CONFIG_DM) && CONFIG_VAL(SYS_MALLOC_F_LEN) 717 int ret; 718 719 bootstage_start(BOOTSTATE_ID_ACCUM_DM_F, "dm_f"); 720 ret = dm_init_and_scan(true); 721 bootstage_accum(BOOTSTATE_ID_ACCUM_DM_F); 722 if (ret) 723 return ret; 724 #endif 725 #ifdef CONFIG_TIMER_EARLY 726 ret = dm_timer_init(); 727 if (ret) 728 return ret; 729 #endif 730 731 return 0; 732 } 733 734 /* Architecture-specific memory reservation */ 735 __weak int reserve_arch(void) 736 { 737 return 0; 738 } 739 740 __weak int arch_cpu_init_dm(void) 741 { 742 return 0; 743 } 744 745 static const init_fnc_t init_sequence_f[] = { 746 setup_mon_len, 747 #ifdef CONFIG_OF_CONTROL 748 fdtdec_setup, 749 #endif 750 #ifdef CONFIG_TRACE 751 trace_early_init, 752 #endif 753 initf_malloc, 754 log_init, 755 initf_bootstage, /* uses its own timer, so does not need DM */ 756 initf_console_record, 757 #if defined(CONFIG_HAVE_FSP) 758 arch_fsp_init, 759 #endif 760 arch_cpu_init, /* basic arch cpu dependent setup */ 761 mach_cpu_init, /* SoC/machine dependent CPU setup */ 762 initf_dm, 763 arch_cpu_init_dm, 764 #if defined(CONFIG_BOARD_EARLY_INIT_F) 765 board_early_init_f, 766 #endif 767 #if defined(CONFIG_PPC) || defined(CONFIG_SYS_FSL_CLK) || defined(CONFIG_M68K) 768 /* get CPU and bus clocks according to the environment variable */ 769 get_clocks, /* get CPU and bus clocks (etc.) */ 770 #endif 771 #if !defined(CONFIG_M68K) 772 timer_init, /* initialize timer */ 773 #endif 774 #if defined(CONFIG_BOARD_POSTCLK_INIT) 775 board_postclk_init, 776 #endif 777 env_init, /* initialize environment */ 778 init_baud_rate, /* initialze baudrate settings */ 779 serial_init, /* serial communications setup */ 780 console_init_f, /* stage 1 init of console */ 781 display_options, /* say that we are here */ 782 display_text_info, /* show debugging info if required */ 783 #if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SH) || \ 784 defined(CONFIG_X86) 785 checkcpu, 786 #endif 787 #if defined(CONFIG_DISPLAY_CPUINFO) 788 print_cpuinfo, /* display cpu info (and speed) */ 789 #endif 790 #if defined(CONFIG_DTB_RESELECT) 791 embedded_dtb_select, 792 #endif 793 #if defined(CONFIG_DISPLAY_BOARDINFO) 794 show_board_info, 795 #endif 796 INIT_FUNC_WATCHDOG_INIT 797 #if defined(CONFIG_MISC_INIT_F) 798 misc_init_f, 799 #endif 800 INIT_FUNC_WATCHDOG_RESET 801 #if defined(CONFIG_SYS_I2C) 802 init_func_i2c, 803 #endif 804 #if defined(CONFIG_HARD_SPI) 805 init_func_spi, 806 #endif 807 announce_dram_init, 808 dram_init, /* configure available RAM banks */ 809 #ifdef CONFIG_POST 810 post_init_f, 811 #endif 812 INIT_FUNC_WATCHDOG_RESET 813 #if defined(CONFIG_SYS_DRAM_TEST) 814 testdram, 815 #endif /* CONFIG_SYS_DRAM_TEST */ 816 INIT_FUNC_WATCHDOG_RESET 817 818 #ifdef CONFIG_POST 819 init_post, 820 #endif 821 INIT_FUNC_WATCHDOG_RESET 822 /* 823 * Now that we have DRAM mapped and working, we can 824 * relocate the code and continue running from DRAM. 825 * 826 * Reserve memory at end of RAM for (top down in that order): 827 * - area that won't get touched by U-Boot and Linux (optional) 828 * - kernel log buffer 829 * - protected RAM 830 * - LCD framebuffer 831 * - monitor code 832 * - board info struct 833 */ 834 setup_dest_addr, 835 #ifdef CONFIG_PRAM 836 reserve_pram, 837 #endif 838 reserve_round_4k, 839 #ifdef CONFIG_ARM 840 reserve_mmu, 841 #endif 842 reserve_video, 843 reserve_trace, 844 reserve_uboot, 845 reserve_malloc, 846 reserve_board, 847 setup_machine, 848 reserve_global_data, 849 reserve_fdt, 850 reserve_bootstage, 851 reserve_arch, 852 reserve_stacks, 853 dram_init_banksize, 854 show_dram_config, 855 #if defined(CONFIG_M68K) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \ 856 defined(CONFIG_SH) 857 setup_board_part1, 858 #endif 859 #if defined(CONFIG_PPC) || defined(CONFIG_M68K) 860 INIT_FUNC_WATCHDOG_RESET 861 setup_board_part2, 862 #endif 863 display_new_sp, 864 #ifdef CONFIG_OF_BOARD_FIXUP 865 fix_fdt, 866 #endif 867 INIT_FUNC_WATCHDOG_RESET 868 reloc_fdt, 869 reloc_bootstage, 870 setup_reloc, 871 #if defined(CONFIG_X86) || defined(CONFIG_ARC) 872 copy_uboot_to_ram, 873 do_elf_reloc_fixups, 874 clear_bss, 875 #endif 876 #if defined(CONFIG_XTENSA) 877 clear_bss, 878 #endif 879 #if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) && \ 880 !CONFIG_IS_ENABLED(X86_64) 881 jump_to_copy, 882 #endif 883 NULL, 884 }; 885 886 void board_init_f(ulong boot_flags) 887 { 888 gd->flags = boot_flags; 889 gd->have_console = 0; 890 891 if (initcall_run_list(init_sequence_f)) 892 hang(); 893 894 #if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) && \ 895 !defined(CONFIG_EFI_APP) && !CONFIG_IS_ENABLED(X86_64) 896 /* NOTREACHED - jump_to_copy() does not return */ 897 hang(); 898 #endif 899 } 900 901 #if defined(CONFIG_X86) || defined(CONFIG_ARC) 902 /* 903 * For now this code is only used on x86. 904 * 905 * init_sequence_f_r is the list of init functions which are run when 906 * U-Boot is executing from Flash with a semi-limited 'C' environment. 907 * The following limitations must be considered when implementing an 908 * '_f_r' function: 909 * - 'static' variables are read-only 910 * - Global Data (gd->xxx) is read/write 911 * 912 * The '_f_r' sequence must, as a minimum, copy U-Boot to RAM (if 913 * supported). It _should_, if possible, copy global data to RAM and 914 * initialise the CPU caches (to speed up the relocation process) 915 * 916 * NOTE: At present only x86 uses this route, but it is intended that 917 * all archs will move to this when generic relocation is implemented. 918 */ 919 static const init_fnc_t init_sequence_f_r[] = { 920 #if !CONFIG_IS_ENABLED(X86_64) 921 init_cache_f_r, 922 #endif 923 924 NULL, 925 }; 926 927 void board_init_f_r(void) 928 { 929 if (initcall_run_list(init_sequence_f_r)) 930 hang(); 931 932 /* 933 * The pre-relocation drivers may be using memory that has now gone 934 * away. Mark serial as unavailable - this will fall back to the debug 935 * UART if available. 936 * 937 * Do the same with log drivers since the memory may not be available. 938 */ 939 gd->flags &= ~(GD_FLG_SERIAL_READY | GD_FLG_LOG_READY); 940 #ifdef CONFIG_TIMER 941 gd->timer = NULL; 942 #endif 943 944 /* 945 * U-Boot has been copied into SDRAM, the BSS has been cleared etc. 946 * Transfer execution from Flash to RAM by calculating the address 947 * of the in-RAM copy of board_init_r() and calling it 948 */ 949 (board_init_r + gd->reloc_off)((gd_t *)gd, gd->relocaddr); 950 951 /* NOTREACHED - board_init_r() does not return */ 952 hang(); 953 } 954 #endif /* CONFIG_X86 */ 955