1menu "Boot timing" 2 3config BOOTSTAGE 4 bool "Boot timing and reporting" 5 help 6 Enable recording of boot time while booting. To use it, insert 7 calls to bootstage_mark() with a suitable BOOTSTAGE_ID from 8 bootstage.h. Only a single entry is recorded for each ID. You can 9 give the entry a name with bootstage_mark_name(). You can also 10 record elapsed time in a particular stage using bootstage_start() 11 before starting and bootstage_accum() when finished. Bootstage will 12 add up all the accumulated time and report it. 13 14 Normally, IDs are defined in bootstage.h but a small number of 15 additional 'user' IDs can be used by passing BOOTSTAGE_ID_ALLOC 16 as the ID. 17 18 Calls to show_boot_progress() will also result in log entries but 19 these will not have names. 20 21config SPL_BOOTSTAGE 22 bool "Boot timing and reported in SPL" 23 depends on BOOTSTAGE 24 help 25 Enable recording of boot time in SPL. To make this visible to U-Boot 26 proper, enable BOOTSTAGE_STASH as well. This will stash the timing 27 information when SPL finishes and load it when U-Boot proper starts 28 up. 29 30config BOOTSTAGE_REPORT 31 bool "Display a detailed boot timing report before booting the OS" 32 depends on BOOTSTAGE 33 help 34 Enable output of a boot time report just before the OS is booted. 35 This shows how long it took U-Boot to go through each stage of the 36 boot process. The report looks something like this: 37 38 Timer summary in microseconds: 39 Mark Elapsed Stage 40 0 0 reset 41 3,575,678 3,575,678 board_init_f start 42 3,575,695 17 arch_cpu_init A9 43 3,575,777 82 arch_cpu_init done 44 3,659,598 83,821 board_init_r start 45 3,910,375 250,777 main_loop 46 29,916,167 26,005,792 bootm_start 47 30,361,327 445,160 start_kernel 48 49config BOOTSTAGE_RECORD_COUNT 50 int "Number of boot stage records to store" 51 default 30 52 help 53 This is the size of the bootstage record list and is the maximum 54 number of bootstage records that can be recorded. 55 56config SPL_BOOTSTAGE_RECORD_COUNT 57 int "Number of boot stage records to store for SPL" 58 default 5 59 help 60 This is the size of the bootstage record list and is the maximum 61 number of bootstage records that can be recorded. 62 63config BOOTSTAGE_FDT 64 bool "Store boot timing information in the OS device tree" 65 depends on BOOTSTAGE 66 help 67 Stash the bootstage information in the FDT. A root 'bootstage' 68 node is created with each bootstage id as a child. Each child 69 has a 'name' property and either 'mark' containing the 70 mark time in microseconds, or 'accum' containing the 71 accumulated time for that bootstage id in microseconds. 72 For example: 73 74 bootstage { 75 154 { 76 name = "board_init_f"; 77 mark = <3575678>; 78 }; 79 170 { 80 name = "lcd"; 81 accum = <33482>; 82 }; 83 }; 84 85 Code in the Linux kernel can find this in /proc/devicetree. 86 87config BOOTSTAGE_STASH 88 bool "Stash the boot timing information in memory before booting OS" 89 depends on BOOTSTAGE 90 help 91 Some OSes do not support device tree. Bootstage can instead write 92 the boot timing information in a binary format at a given address. 93 This happens through a call to bootstage_stash(), typically in 94 the CPU's cleanup_before_linux() function. You can use the 95 'bootstage stash' and 'bootstage unstash' commands to do this on 96 the command line. 97 98config BOOTSTAGE_STASH_ADDR 99 hex "Address to stash boot timing information" 100 default 0 101 help 102 Provide an address which will not be overwritten by the OS when it 103 starts, so that it can read this information when ready. 104 105config BOOTSTAGE_STASH_SIZE 106 hex "Size of boot timing stash region" 107 default 0x1000 108 help 109 This should be large enough to hold the bootstage stash. A value of 110 4096 (4KiB) is normally plenty. 111 112endmenu 113 114menu "Boot media" 115 116config NOR_BOOT 117 bool "Support for booting from NOR flash" 118 depends on NOR 119 help 120 Enabling this will make a U-Boot binary that is capable of being 121 booted via NOR. In this case we will enable certain pinmux early 122 as the ROM only partially sets up pinmux. We also default to using 123 NOR for environment. 124 125config NAND_BOOT 126 bool "Support for booting from NAND flash" 127 default n 128 help 129 Enabling this will make a U-Boot binary that is capable of being 130 booted via NAND flash. This is not a must, some SoCs need this, 131 some not. 132 133config ONENAND_BOOT 134 bool "Support for booting from ONENAND" 135 default n 136 help 137 Enabling this will make a U-Boot binary that is capable of being 138 booted via ONENAND. This is not a must, some SoCs need this, 139 some not. 140 141config QSPI_BOOT 142 bool "Support for booting from QSPI flash" 143 default n 144 help 145 Enabling this will make a U-Boot binary that is capable of being 146 booted via QSPI flash. This is not a must, some SoCs need this, 147 some not. 148 149config SATA_BOOT 150 bool "Support for booting from SATA" 151 default n 152 help 153 Enabling this will make a U-Boot binary that is capable of being 154 booted via SATA. This is not a must, some SoCs need this, 155 some not. 156 157config SD_BOOT 158 bool "Support for booting from SD/EMMC" 159 default n 160 help 161 Enabling this will make a U-Boot binary that is capable of being 162 booted via SD/EMMC. This is not a must, some SoCs need this, 163 some not. 164 165config SPI_BOOT 166 bool "Support for booting from SPI flash" 167 default n 168 help 169 Enabling this will make a U-Boot binary that is capable of being 170 booted via SPI flash. This is not a must, some SoCs need this, 171 some not. 172 173endmenu 174 175config BOOTDELAY 176 int "delay in seconds before automatically booting" 177 default 2 178 depends on AUTOBOOT 179 help 180 Delay before automatically running bootcmd; 181 set to 0 to autoboot with no delay, but you can stop it by key input. 182 set to -1 to disable autoboot. 183 set to -2 to autoboot with no delay and not check for abort 184 185 See doc/README.autoboot for details. 186 187config USE_BOOTARGS 188 bool "Enable boot arguments" 189 help 190 Provide boot arguments to bootm command. Boot arguments are specified 191 in CONFIG_BOOTARGS option. Enable this option to be able to specify 192 CONFIG_BOOTARGS string. If this option is disabled, CONFIG_BOOTARGS 193 will be undefined and won't take any space in U-Boot image. 194 195config BOOTARGS 196 string "Boot arguments" 197 depends on USE_BOOTARGS 198 help 199 This can be used to pass arguments to the bootm command. The value of 200 CONFIG_BOOTARGS goes into the environment value "bootargs". Note that 201 this value will also override the "chosen" node in FDT blob. 202 203menu "Console" 204 205config MENU 206 bool 207 help 208 This is the library functionality to provide a text-based menu of 209 choices for the user to make choices with. 210 211config CONSOLE_RECORD 212 bool "Console recording" 213 help 214 This provides a way to record console output (and provide console 215 input) through circular buffers. This is mostly useful for testing. 216 Console output is recorded even when the console is silent. 217 To enable console recording, call console_record_reset_enable() 218 from your code. 219 220config CONSOLE_RECORD_OUT_SIZE 221 hex "Output buffer size" 222 depends on CONSOLE_RECORD 223 default 0x400 if CONSOLE_RECORD 224 help 225 Set the size of the console output buffer. When this fills up, no 226 more data will be recorded until some is removed. The buffer is 227 allocated immediately after the malloc() region is ready. 228 229config CONSOLE_RECORD_IN_SIZE 230 hex "Input buffer size" 231 depends on CONSOLE_RECORD 232 default 0x100 if CONSOLE_RECORD 233 help 234 Set the size of the console input buffer. When this contains data, 235 tstc() and getc() will use this in preference to real device input. 236 The buffer is allocated immediately after the malloc() region is 237 ready. 238 239config IDENT_STRING 240 string "Board specific string to be added to uboot version string" 241 help 242 This options adds the board specific name to u-boot version. 243 244config LOGLEVEL 245 int "loglevel" 246 default 4 247 range 0 8 248 help 249 All Messages with a loglevel smaller than the console loglevel will 250 be compiled in. The loglevels are defined as follows: 251 252 0 (KERN_EMERG) system is unusable 253 1 (KERN_ALERT) action must be taken immediately 254 2 (KERN_CRIT) critical conditions 255 3 (KERN_ERR) error conditions 256 4 (KERN_WARNING) warning conditions 257 5 (KERN_NOTICE) normal but significant condition 258 6 (KERN_INFO) informational 259 7 (KERN_DEBUG) debug-level messages 260 261config SPL_LOGLEVEL 262 int 263 default LOGLEVEL 264 265config SILENT_CONSOLE 266 bool "Support a silent console" 267 help 268 This option allows the console to be silenced, meaning that no 269 output will appear on the console devices. This is controlled by 270 setting the environment vaariable 'silent' to a non-empty value. 271 Note this also silences the console when booting Linux. 272 273 When the console is set up, the variable is checked, and the 274 GD_FLG_SILENT flag is set. Changing the environment variable later 275 will update the flag. 276 277config SILENT_U_BOOT_ONLY 278 bool "Only silence the U-Boot console" 279 depends on SILENT_CONSOLE 280 help 281 Normally when the U-Boot console is silenced, Linux's console is 282 also silenced (assuming the board boots into Linux). This option 283 allows the linux console to operate normally, even if U-Boot's 284 is silenced. 285 286config SILENT_CONSOLE_UPDATE_ON_SET 287 bool "Changes to the 'silent' environment variable update immediately" 288 depends on SILENT_CONSOLE 289 default y if SILENT_CONSOLE 290 help 291 When the 'silent' environment variable is changed, update the 292 console silence flag immediately. This allows 'setenv' to be used 293 to silence or un-silence the console. 294 295 The effect is that any change to the variable will affect the 296 GD_FLG_SILENT flag. 297 298config SILENT_CONSOLE_UPDATE_ON_RELOC 299 bool "Allow flags to take effect on relocation" 300 depends on SILENT_CONSOLE 301 help 302 In some cases the environment is not available until relocation 303 (e.g. NAND). This option makes the value of the 'silent' 304 environment variable take effect at relocation. 305 306config PRE_CONSOLE_BUFFER 307 bool "Buffer characters before the console is available" 308 help 309 Prior to the console being initialised (i.e. serial UART 310 initialised etc) all console output is silently discarded. 311 Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to 312 buffer any console messages prior to the console being 313 initialised to a buffer. The buffer is a circular buffer, so 314 if it overflows, earlier output is discarded. 315 316 Note that this is not currently supported in SPL. It would be 317 useful to be able to share the pre-console buffer with SPL. 318 319config PRE_CON_BUF_SZ 320 int "Sets the size of the pre-console buffer" 321 depends on PRE_CONSOLE_BUFFER 322 default 4096 323 help 324 The size of the pre-console buffer affects how much console output 325 can be held before it overflows and starts discarding earlier 326 output. Normally there is very little output at this early stage, 327 unless debugging is enabled, so allow enough for ~10 lines of 328 text. 329 330 This is a useful feature if you are using a video console and 331 want to see the full boot output on the console. Without this 332 option only the post-relocation output will be displayed. 333 334config PRE_CON_BUF_ADDR 335 hex "Address of the pre-console buffer" 336 depends on PRE_CONSOLE_BUFFER 337 default 0x2f000000 if ARCH_SUNXI && MACH_SUN9I 338 default 0x4f000000 if ARCH_SUNXI && !MACH_SUN9I 339 help 340 This sets the start address of the pre-console buffer. This must 341 be in available memory and is accessed before relocation and 342 possibly before DRAM is set up. Therefore choose an address 343 carefully. 344 345 We should consider removing this option and allocating the memory 346 in board_init_f_init_reserve() instead. 347 348config CONSOLE_MUX 349 bool "Enable console multiplexing" 350 default y if DM_VIDEO || VIDEO || LCD 351 help 352 This allows multiple devices to be used for each console 'file'. 353 For example, stdout can be set to go to serial and video. 354 Similarly, stdin can be set to come from serial and keyboard. 355 Input can be provided from either source. Console multiplexing 356 adds a small amount of size to U-Boot. Changes to the environment 357 variables stdout, stdin and stderr will take effect immediately. 358 359config SYS_CONSOLE_IS_IN_ENV 360 bool "Select console devices from the environment" 361 default y if CONSOLE_MUX 362 help 363 This allows multiple input/output devices to be set at boot time. 364 For example, if stdout is set to "serial,video" then output will 365 be sent to both the serial and video devices on boot. The 366 environment variables can be updated after boot to change the 367 input/output devices. 368 369config SYS_CONSOLE_OVERWRITE_ROUTINE 370 bool "Allow board control over console overwriting" 371 help 372 If this is enabled, and the board-specific function 373 overwrite_console() returns 1, the stdin, stderr and stdout are 374 switched to the serial port, else the settings in the environment 375 are used. If this is not enabled, the console will not be switched 376 to serial. 377 378config SYS_CONSOLE_ENV_OVERWRITE 379 bool "Update environment variables during console init" 380 help 381 The console environment variables (stdout, stdin, stderr) can be 382 used to determine the correct console devices on start-up. This 383 option writes the console devices to these variables on console 384 start-up (after relocation). This causes the environment to be 385 updated to match the console devices actually chosen. 386 387config SYS_CONSOLE_INFO_QUIET 388 bool "Don't display the console devices on boot" 389 help 390 Normally U-Boot displays the current settings for stdout, stdin 391 and stderr on boot when the post-relocation console is set up. 392 Enable this option to supress this output. It can be obtained by 393 calling stdio_print_current_devices() from board code. 394 395config SYS_STDIO_DEREGISTER 396 bool "Allow deregistering stdio devices" 397 default y if USB_KEYBOARD 398 help 399 Generally there is no need to deregister stdio devices since they 400 are never deactivated. But if a stdio device is used which can be 401 removed (for example a USB keyboard) then this option can be 402 enabled to ensure this is handled correctly. 403 404endmenu 405 406config DEFAULT_FDT_FILE 407 string "Default fdt file" 408 help 409 This option is used to set the default fdt file to boot OS. 410 411config VERSION_VARIABLE 412 bool "add U-Boot environment variable vers" 413 default n 414 help 415 If this variable is defined, an environment variable 416 named "ver" is created by U-Boot showing the U-Boot 417 version as printed by the "version" command. 418 Any change to this variable will be reverted at the 419 next reset. 420 421config BOARD_LATE_INIT 422 bool 423 help 424 Sometimes board require some initialization code that might 425 require once the actual init done, example saving board specific env, 426 boot-modes etc. which eventually done at late. 427 428 So this config enable the late init code with the help of board_late_init 429 function which should defined on respective boards. 430 431config DISPLAY_CPUINFO 432 bool "Display information about the CPU during start up" 433 default y if ARM || NIOS2 || X86 || XTENSA 434 help 435 Display information about the CPU that U-Boot is running on 436 when U-Boot starts up. The function print_cpuinfo() is called 437 to do this. 438 439config DISPLAY_BOARDINFO 440 bool "Display information about the board during start up" 441 default y if ARM || M68K || MIPS || PPC || SANDBOX || XTENSA 442 help 443 Display information about the board that U-Boot is running on 444 when U-Boot starts up. The board function checkboard() is called 445 to do this. 446 447menu "Start-up hooks" 448 449config ARCH_EARLY_INIT_R 450 bool "Call arch-specific init soon after relocation" 451 help 452 With this option U-Boot will call arch_early_init_r() soon after 453 relocation. Driver model is running by this point, and the cache 454 is on. Note that board_early_init_r() is called first, if 455 enabled. This can be used to set up architecture-specific devices. 456 457config ARCH_MISC_INIT 458 bool "Call arch-specific init after relocation, when console is ready" 459 help 460 With this option U-Boot will call arch_misc_init() after 461 relocation to allow miscellaneous arch-dependent initialisation 462 to be performed. This function should be defined by the board 463 and will be called after the console is set up, after relocaiton. 464 465config BOARD_EARLY_INIT_F 466 bool "Call board-specific init before relocation" 467 help 468 Some boards need to perform initialisation as soon as possible 469 after boot. With this option, U-Boot calls board_early_init_f() 470 after driver model is ready in the pre-relocation init sequence. 471 Note that the normal serial console is not yet set up, but the 472 debug UART will be available if enabled. 473 474endmenu 475 476menu "Security support" 477 478config HASH 479 bool # "Support hashing API (SHA1, SHA256, etc.)" 480 help 481 This provides a way to hash data in memory using various supported 482 algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h 483 and the algorithms it supports are defined in common/hash.c. See 484 also CMD_HASH for command-line access. 485 486endmenu 487 488source "common/spl/Kconfig" 489