1menu "Boot timing" 2 3config BOOTSTAGE 4 bool "Boot timing and reporting" 5 help 6 Enable recording of boot time while booting. To use it, insert 7 calls to bootstage_mark() with a suitable BOOTSTAGE_ID from 8 bootstage.h. Only a single entry is recorded for each ID. You can 9 give the entry a name with bootstage_mark_name(). You can also 10 record elapsed time in a particular stage using bootstage_start() 11 before starting and bootstage_accum() when finished. Bootstage will 12 add up all the accumulated time and report it. 13 14 Normally, IDs are defined in bootstage.h but a small number of 15 additional 'user' IDs can be used by passing BOOTSTAGE_ID_ALLOC 16 as the ID. 17 18 Calls to show_boot_progress() will also result in log entries but 19 these will not have names. 20 21config SPL_BOOTSTAGE 22 bool "Boot timing and reported in SPL" 23 depends on BOOTSTAGE 24 help 25 Enable recording of boot time in SPL. To make this visible to U-Boot 26 proper, enable BOOTSTAGE_STASH as well. This will stash the timing 27 information when SPL finishes and load it when U-Boot proper starts 28 up. 29 30config BOOTSTAGE_REPORT 31 bool "Display a detailed boot timing report before booting the OS" 32 depends on BOOTSTAGE 33 help 34 Enable output of a boot time report just before the OS is booted. 35 This shows how long it took U-Boot to go through each stage of the 36 boot process. The report looks something like this: 37 38 Timer summary in microseconds: 39 Mark Elapsed Stage 40 0 0 reset 41 3,575,678 3,575,678 board_init_f start 42 3,575,695 17 arch_cpu_init A9 43 3,575,777 82 arch_cpu_init done 44 3,659,598 83,821 board_init_r start 45 3,910,375 250,777 main_loop 46 29,916,167 26,005,792 bootm_start 47 30,361,327 445,160 start_kernel 48 49config BOOTSTAGE_RECORD_COUNT 50 int "Number of boot stage records to store" 51 default 30 52 help 53 This is the size of the bootstage record list and is the maximum 54 number of bootstage records that can be recorded. 55 56config SPL_BOOTSTAGE_RECORD_COUNT 57 int "Number of boot stage records to store for SPL" 58 default 5 59 help 60 This is the size of the bootstage record list and is the maximum 61 number of bootstage records that can be recorded. 62 63config BOOTSTAGE_FDT 64 bool "Store boot timing information in the OS device tree" 65 depends on BOOTSTAGE 66 help 67 Stash the bootstage information in the FDT. A root 'bootstage' 68 node is created with each bootstage id as a child. Each child 69 has a 'name' property and either 'mark' containing the 70 mark time in microseconds, or 'accum' containing the 71 accumulated time for that bootstage id in microseconds. 72 For example: 73 74 bootstage { 75 154 { 76 name = "board_init_f"; 77 mark = <3575678>; 78 }; 79 170 { 80 name = "lcd"; 81 accum = <33482>; 82 }; 83 }; 84 85 Code in the Linux kernel can find this in /proc/devicetree. 86 87config BOOTSTAGE_STASH 88 bool "Stash the boot timing information in memory before booting OS" 89 depends on BOOTSTAGE 90 help 91 Some OSes do not support device tree. Bootstage can instead write 92 the boot timing information in a binary format at a given address. 93 This happens through a call to bootstage_stash(), typically in 94 the CPU's cleanup_before_linux() function. You can use the 95 'bootstage stash' and 'bootstage unstash' commands to do this on 96 the command line. 97 98config BOOTSTAGE_STASH_ADDR 99 hex "Address to stash boot timing information" 100 default 0 101 help 102 Provide an address which will not be overwritten by the OS when it 103 starts, so that it can read this information when ready. 104 105config BOOTSTAGE_STASH_SIZE 106 hex "Size of boot timing stash region" 107 default 0x1000 108 help 109 This should be large enough to hold the bootstage stash. A value of 110 4096 (4KiB) is normally plenty. 111 112endmenu 113 114menu "Boot media" 115 116config NOR_BOOT 117 bool "Support for booting from NOR flash" 118 depends on NOR 119 help 120 Enabling this will make a U-Boot binary that is capable of being 121 booted via NOR. In this case we will enable certain pinmux early 122 as the ROM only partially sets up pinmux. We also default to using 123 NOR for environment. 124 125config NAND_BOOT 126 bool "Support for booting from NAND flash" 127 default n 128 imply NAND 129 help 130 Enabling this will make a U-Boot binary that is capable of being 131 booted via NAND flash. This is not a must, some SoCs need this, 132 some not. 133 134config ONENAND_BOOT 135 bool "Support for booting from ONENAND" 136 default n 137 imply NAND 138 help 139 Enabling this will make a U-Boot binary that is capable of being 140 booted via ONENAND. This is not a must, some SoCs need this, 141 some not. 142 143config QSPI_BOOT 144 bool "Support for booting from QSPI flash" 145 default n 146 help 147 Enabling this will make a U-Boot binary that is capable of being 148 booted via QSPI flash. This is not a must, some SoCs need this, 149 some not. 150 151config SATA_BOOT 152 bool "Support for booting from SATA" 153 default n 154 help 155 Enabling this will make a U-Boot binary that is capable of being 156 booted via SATA. This is not a must, some SoCs need this, 157 some not. 158 159config SD_BOOT 160 bool "Support for booting from SD/EMMC" 161 default n 162 help 163 Enabling this will make a U-Boot binary that is capable of being 164 booted via SD/EMMC. This is not a must, some SoCs need this, 165 some not. 166 167config SPI_BOOT 168 bool "Support for booting from SPI flash" 169 default n 170 help 171 Enabling this will make a U-Boot binary that is capable of being 172 booted via SPI flash. This is not a must, some SoCs need this, 173 some not. 174 175endmenu 176 177config BOOTDELAY 178 int "delay in seconds before automatically booting" 179 default 2 180 depends on AUTOBOOT 181 help 182 Delay before automatically running bootcmd; 183 set to 0 to autoboot with no delay, but you can stop it by key input. 184 set to -1 to disable autoboot. 185 set to -2 to autoboot with no delay and not check for abort 186 187 If this value is >= 0 then it is also used for the default delay 188 before starting the default entry in bootmenu. If it is < 0 then 189 a default value of 10s is used. 190 191 See doc/README.autoboot for details. 192 193config USE_BOOTARGS 194 bool "Enable boot arguments" 195 help 196 Provide boot arguments to bootm command. Boot arguments are specified 197 in CONFIG_BOOTARGS option. Enable this option to be able to specify 198 CONFIG_BOOTARGS string. If this option is disabled, CONFIG_BOOTARGS 199 will be undefined and won't take any space in U-Boot image. 200 201config BOOTARGS 202 string "Boot arguments" 203 depends on USE_BOOTARGS 204 help 205 This can be used to pass arguments to the bootm command. The value of 206 CONFIG_BOOTARGS goes into the environment value "bootargs". Note that 207 this value will also override the "chosen" node in FDT blob. 208 209config USE_BOOTCOMMAND 210 bool "Enable a default value for bootcmd" 211 help 212 Provide a default value for the bootcmd entry in the environment. If 213 autoboot is enabled this is what will be run automatically. Enable 214 this option to be able to specify CONFIG_BOOTCOMMAND as a string. If 215 this option is disabled, CONFIG_BOOTCOMMAND will be undefined and 216 won't take any space in U-Boot image. 217 218config BOOTCOMMAND 219 string "bootcmd value" 220 depends on USE_BOOTCOMMAND 221 default "run distro_bootcmd" if DISTRO_DEFAULTS 222 help 223 This is the string of commands that will be used as bootcmd and if 224 AUTOBOOT is set, automatically run. 225 226menu "Console" 227 228config MENU 229 bool 230 help 231 This is the library functionality to provide a text-based menu of 232 choices for the user to make choices with. 233 234config CONSOLE_RECORD 235 bool "Console recording" 236 help 237 This provides a way to record console output (and provide console 238 input) through circular buffers. This is mostly useful for testing. 239 Console output is recorded even when the console is silent. 240 To enable console recording, call console_record_reset_enable() 241 from your code. 242 243config CONSOLE_RECORD_OUT_SIZE 244 hex "Output buffer size" 245 depends on CONSOLE_RECORD 246 default 0x400 if CONSOLE_RECORD 247 help 248 Set the size of the console output buffer. When this fills up, no 249 more data will be recorded until some is removed. The buffer is 250 allocated immediately after the malloc() region is ready. 251 252config CONSOLE_RECORD_IN_SIZE 253 hex "Input buffer size" 254 depends on CONSOLE_RECORD 255 default 0x100 if CONSOLE_RECORD 256 help 257 Set the size of the console input buffer. When this contains data, 258 tstc() and getc() will use this in preference to real device input. 259 The buffer is allocated immediately after the malloc() region is 260 ready. 261 262config IDENT_STRING 263 string "Board specific string to be added to uboot version string" 264 help 265 This options adds the board specific name to u-boot version. 266 267config LOGLEVEL 268 int "loglevel" 269 default 4 270 range 0 8 271 help 272 All Messages with a loglevel smaller than the console loglevel will 273 be compiled in. The loglevels are defined as follows: 274 275 0 (KERN_EMERG) system is unusable 276 1 (KERN_ALERT) action must be taken immediately 277 2 (KERN_CRIT) critical conditions 278 3 (KERN_ERR) error conditions 279 4 (KERN_WARNING) warning conditions 280 5 (KERN_NOTICE) normal but significant condition 281 6 (KERN_INFO) informational 282 7 (KERN_DEBUG) debug-level messages 283 284config SPL_LOGLEVEL 285 int 286 default LOGLEVEL 287 288config SILENT_CONSOLE 289 bool "Support a silent console" 290 help 291 This option allows the console to be silenced, meaning that no 292 output will appear on the console devices. This is controlled by 293 setting the environment vaariable 'silent' to a non-empty value. 294 Note this also silences the console when booting Linux. 295 296 When the console is set up, the variable is checked, and the 297 GD_FLG_SILENT flag is set. Changing the environment variable later 298 will update the flag. 299 300config SILENT_U_BOOT_ONLY 301 bool "Only silence the U-Boot console" 302 depends on SILENT_CONSOLE 303 help 304 Normally when the U-Boot console is silenced, Linux's console is 305 also silenced (assuming the board boots into Linux). This option 306 allows the linux console to operate normally, even if U-Boot's 307 is silenced. 308 309config SILENT_CONSOLE_UPDATE_ON_SET 310 bool "Changes to the 'silent' environment variable update immediately" 311 depends on SILENT_CONSOLE 312 default y if SILENT_CONSOLE 313 help 314 When the 'silent' environment variable is changed, update the 315 console silence flag immediately. This allows 'setenv' to be used 316 to silence or un-silence the console. 317 318 The effect is that any change to the variable will affect the 319 GD_FLG_SILENT flag. 320 321config SILENT_CONSOLE_UPDATE_ON_RELOC 322 bool "Allow flags to take effect on relocation" 323 depends on SILENT_CONSOLE 324 help 325 In some cases the environment is not available until relocation 326 (e.g. NAND). This option makes the value of the 'silent' 327 environment variable take effect at relocation. 328 329config PRE_CONSOLE_BUFFER 330 bool "Buffer characters before the console is available" 331 help 332 Prior to the console being initialised (i.e. serial UART 333 initialised etc) all console output is silently discarded. 334 Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to 335 buffer any console messages prior to the console being 336 initialised to a buffer. The buffer is a circular buffer, so 337 if it overflows, earlier output is discarded. 338 339 Note that this is not currently supported in SPL. It would be 340 useful to be able to share the pre-console buffer with SPL. 341 342config PRE_CON_BUF_SZ 343 int "Sets the size of the pre-console buffer" 344 depends on PRE_CONSOLE_BUFFER 345 default 4096 346 help 347 The size of the pre-console buffer affects how much console output 348 can be held before it overflows and starts discarding earlier 349 output. Normally there is very little output at this early stage, 350 unless debugging is enabled, so allow enough for ~10 lines of 351 text. 352 353 This is a useful feature if you are using a video console and 354 want to see the full boot output on the console. Without this 355 option only the post-relocation output will be displayed. 356 357config PRE_CON_BUF_ADDR 358 hex "Address of the pre-console buffer" 359 depends on PRE_CONSOLE_BUFFER 360 default 0x2f000000 if ARCH_SUNXI && MACH_SUN9I 361 default 0x4f000000 if ARCH_SUNXI && !MACH_SUN9I 362 help 363 This sets the start address of the pre-console buffer. This must 364 be in available memory and is accessed before relocation and 365 possibly before DRAM is set up. Therefore choose an address 366 carefully. 367 368 We should consider removing this option and allocating the memory 369 in board_init_f_init_reserve() instead. 370 371config CONSOLE_MUX 372 bool "Enable console multiplexing" 373 default y if DM_VIDEO || VIDEO || LCD 374 help 375 This allows multiple devices to be used for each console 'file'. 376 For example, stdout can be set to go to serial and video. 377 Similarly, stdin can be set to come from serial and keyboard. 378 Input can be provided from either source. Console multiplexing 379 adds a small amount of size to U-Boot. Changes to the environment 380 variables stdout, stdin and stderr will take effect immediately. 381 382config SYS_CONSOLE_IS_IN_ENV 383 bool "Select console devices from the environment" 384 default y if CONSOLE_MUX 385 help 386 This allows multiple input/output devices to be set at boot time. 387 For example, if stdout is set to "serial,video" then output will 388 be sent to both the serial and video devices on boot. The 389 environment variables can be updated after boot to change the 390 input/output devices. 391 392config SYS_CONSOLE_OVERWRITE_ROUTINE 393 bool "Allow board control over console overwriting" 394 help 395 If this is enabled, and the board-specific function 396 overwrite_console() returns 1, the stdin, stderr and stdout are 397 switched to the serial port, else the settings in the environment 398 are used. If this is not enabled, the console will not be switched 399 to serial. 400 401config SYS_CONSOLE_ENV_OVERWRITE 402 bool "Update environment variables during console init" 403 help 404 The console environment variables (stdout, stdin, stderr) can be 405 used to determine the correct console devices on start-up. This 406 option writes the console devices to these variables on console 407 start-up (after relocation). This causes the environment to be 408 updated to match the console devices actually chosen. 409 410config SYS_CONSOLE_INFO_QUIET 411 bool "Don't display the console devices on boot" 412 help 413 Normally U-Boot displays the current settings for stdout, stdin 414 and stderr on boot when the post-relocation console is set up. 415 Enable this option to supress this output. It can be obtained by 416 calling stdio_print_current_devices() from board code. 417 418config SYS_STDIO_DEREGISTER 419 bool "Allow deregistering stdio devices" 420 default y if USB_KEYBOARD 421 help 422 Generally there is no need to deregister stdio devices since they 423 are never deactivated. But if a stdio device is used which can be 424 removed (for example a USB keyboard) then this option can be 425 enabled to ensure this is handled correctly. 426 427endmenu 428 429menu "Logging" 430 431config LOG 432 bool "Enable logging support" 433 depends on DM 434 help 435 This enables support for logging of status and debug messages. These 436 can be displayed on the console, recorded in a memory buffer, or 437 discarded if not needed. Logging supports various categories and 438 levels of severity. 439 440config SPL_LOG 441 bool "Enable logging support in SPL" 442 help 443 This enables support for logging of status and debug messages. These 444 can be displayed on the console, recorded in a memory buffer, or 445 discarded if not needed. Logging supports various categories and 446 levels of severity. 447 448config LOG_MAX_LEVEL 449 int "Maximum log level to record" 450 depends on LOG 451 default 5 452 help 453 This selects the maximum log level that will be recorded. Any value 454 higher than this will be ignored. If possible log statements below 455 this level will be discarded at build time. Levels: 456 457 0 - panic 458 1 - critical 459 2 - error 460 3 - warning 461 4 - note 462 5 - info 463 6 - detail 464 7 - debug 465 466config SPL_LOG_MAX_LEVEL 467 int "Maximum log level to record in SPL" 468 depends on SPL_LOG 469 default 3 470 help 471 This selects the maximum log level that will be recorded. Any value 472 higher than this will be ignored. If possible log statements below 473 this level will be discarded at build time. Levels: 474 475 0 - panic 476 1 - critical 477 2 - error 478 3 - warning 479 4 - note 480 5 - info 481 6 - detail 482 7 - debug 483 484config LOG_CONSOLE 485 bool "Allow log output to the console" 486 depends on LOG 487 default y 488 help 489 Enables a log driver which writes log records to the console. 490 Generally the console is the serial port or LCD display. Only the 491 log message is shown - other details like level, category, file and 492 line number are omitted. 493 494config LOG_SPL_CONSOLE 495 bool "Allow log output to the console in SPL" 496 depends on LOG_SPL 497 default y 498 help 499 Enables a log driver which writes log records to the console. 500 Generally the console is the serial port or LCD display. Only the 501 log message is shown - other details like level, category, file and 502 line number are omitted. 503 504config LOG_TEST 505 bool "Provide a test for logging" 506 depends on LOG 507 default y if SANDBOX 508 help 509 This enables a 'log test' command to test logging. It is normally 510 executed from a pytest and simply outputs logging information 511 in various different ways to test that the logging system works 512 correctly with varoius settings. 513 514config LOG_ERROR_RETURN 515 bool "Log all functions which return an error" 516 depends on LOG 517 help 518 When an error is returned in U-Boot it is sometimes difficult to 519 figure out the root cause. For eaxmple, reading from SPI flash may 520 fail due to a problem in the SPI controller or due to the flash part 521 not returning the expected information. This option changes 522 log_ret() to log any errors it sees. With this option disabled, 523 log_ret() is a nop. 524 525 You can add log_ret() to all functions which return an error code. 526 527endmenu 528 529config SUPPORT_RAW_INITRD 530 bool "Enable raw initrd images" 531 help 532 Note, defining the SUPPORT_RAW_INITRD allows user to supply 533 kernel with raw initrd images. The syntax is slightly different, the 534 address of the initrd must be augmented by it's size, in the following 535 format: "<initrd address>:<initrd size>". 536 537config DEFAULT_FDT_FILE 538 string "Default fdt file" 539 help 540 This option is used to set the default fdt file to boot OS. 541 542config MISC_INIT_R 543 bool "Execute Misc Init" 544 default y if ARCH_KEYSTONE || ARCH_SUNXI || MPC85xx 545 default y if ARCH_OMAP2PLUS && !AM33XX 546 help 547 Enabling this option calls 'misc_init_r' function 548 549config VERSION_VARIABLE 550 bool "add U-Boot environment variable vers" 551 default n 552 help 553 If this variable is defined, an environment variable 554 named "ver" is created by U-Boot showing the U-Boot 555 version as printed by the "version" command. 556 Any change to this variable will be reverted at the 557 next reset. 558 559config BOARD_LATE_INIT 560 bool 561 help 562 Sometimes board require some initialization code that might 563 require once the actual init done, example saving board specific env, 564 boot-modes etc. which eventually done at late. 565 566 So this config enable the late init code with the help of board_late_init 567 function which should defined on respective boards. 568 569config DISPLAY_CPUINFO 570 bool "Display information about the CPU during start up" 571 default y if ARM || NIOS2 || X86 || XTENSA || M68K 572 help 573 Display information about the CPU that U-Boot is running on 574 when U-Boot starts up. The function print_cpuinfo() is called 575 to do this. 576 577config DISPLAY_BOARDINFO 578 bool "Display information about the board during early start up" 579 default y if ARM || M68K || MIPS || PPC || SANDBOX || XTENSA 580 help 581 Display information about the board that U-Boot is running on 582 when U-Boot starts up. The board function checkboard() is called 583 to do this. 584 585config DISPLAY_BOARDINFO_LATE 586 bool "Display information about the board during late start up" 587 help 588 Display information about the board that U-Boot is running on after 589 the relocation phase. The board function checkboard() is called to do 590 this. 591 592menu "Start-up hooks" 593 594config ARCH_EARLY_INIT_R 595 bool "Call arch-specific init soon after relocation" 596 help 597 With this option U-Boot will call arch_early_init_r() soon after 598 relocation. Driver model is running by this point, and the cache 599 is on. Note that board_early_init_r() is called first, if 600 enabled. This can be used to set up architecture-specific devices. 601 602config ARCH_MISC_INIT 603 bool "Call arch-specific init after relocation, when console is ready" 604 help 605 With this option U-Boot will call arch_misc_init() after 606 relocation to allow miscellaneous arch-dependent initialisation 607 to be performed. This function should be defined by the board 608 and will be called after the console is set up, after relocaiton. 609 610config BOARD_EARLY_INIT_F 611 bool "Call board-specific init before relocation" 612 help 613 Some boards need to perform initialisation as soon as possible 614 after boot. With this option, U-Boot calls board_early_init_f() 615 after driver model is ready in the pre-relocation init sequence. 616 Note that the normal serial console is not yet set up, but the 617 debug UART will be available if enabled. 618 619config BOARD_EARLY_INIT_R 620 bool "Call board-specific init after relocation" 621 help 622 Some boards need to perform initialisation as directly after 623 relocation. With this option, U-Boot calls board_early_init_r() 624 in the post-relocation init sequence. 625 626config LAST_STAGE_INIT 627 bool "Call board-specific as last setup step" 628 help 629 Some boards need to perform initialisation immediately before control 630 is passed to the command-line interpreter (e.g. for initializations 631 that depend on later phases in the init sequence). With this option, 632 U-Boot calls last_stage_init() before the command-line interpreter is 633 started. 634 635endmenu 636 637menu "Security support" 638 639config HASH 640 bool # "Support hashing API (SHA1, SHA256, etc.)" 641 help 642 This provides a way to hash data in memory using various supported 643 algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h 644 and the algorithms it supports are defined in common/hash.c. See 645 also CMD_HASH for command-line access. 646 647config AVB_VERIFY 648 bool "Build Android Verified Boot operations" 649 depends on LIBAVB && FASTBOOT 650 help 651 This option enables compilation of bootloader-dependent operations, 652 used by Android Verified Boot 2.0 library (libavb). Includes: 653 * Helpers to process strings in order to build OS bootargs. 654 * Helpers to access MMC, similar to drivers/fastboot/fb_mmc.c. 655 * Helpers to alloc/init/free avb ops. 656 657endmenu 658 659menu "Update support" 660 661config UPDATE_TFTP 662 bool "Auto-update using fitImage via TFTP" 663 depends on FIT 664 help 665 This option allows performing update of NOR with data in fitImage 666 sent via TFTP boot. 667 668config UPDATE_TFTP_CNT_MAX 669 int "The number of connection retries during auto-update" 670 default 0 671 depends on UPDATE_TFTP 672 673config UPDATE_TFTP_MSEC_MAX 674 int "Delay in mSec to wait for the TFTP server during auto-update" 675 default 100 676 depends on UPDATE_TFTP 677 678endmenu 679 680source "common/spl/Kconfig" 681