xref: /openbmc/u-boot/cmd/universe.c (revision 6a7b52bc)
1 /*
2  * (C) Copyright 2003 Stefan Roese, stefan.roese@esd-electronics.com
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <command.h>
9 #include <malloc.h>
10 #include <asm/io.h>
11 #include <pci.h>
12 
13 #include <universe.h>
14 
15 #define PCI_VENDOR PCI_VENDOR_ID_TUNDRA
16 #define PCI_DEVICE PCI_DEVICE_ID_TUNDRA_CA91C042
17 
18 
19 typedef struct _UNI_DEV UNI_DEV;
20 
21 struct _UNI_DEV {
22 	int            bus;
23 	pci_dev_t      busdevfn;
24 	UNIVERSE       *uregs;
25 	unsigned int   pci_bs;
26 };
27 
28 static UNI_DEV   *dev;
29 
30 
31 int universe_init(void)
32 {
33 	int j, result;
34 	pci_dev_t busdevfn;
35 	unsigned int val;
36 
37 	busdevfn = pci_find_device(PCI_VENDOR, PCI_DEVICE, 0);
38 	if (busdevfn == -1) {
39 		puts("No Tundra Universe found!\n");
40 		return -1;
41 	}
42 
43 	/* Lets turn Latency off */
44 	pci_write_config_dword(busdevfn, 0x0c, 0);
45 
46 	dev = malloc(sizeof(*dev));
47 	if (NULL == dev) {
48 		puts("UNIVERSE: No memory!\n");
49 		result = -1;
50 		goto break_20;
51 	}
52 
53 	memset(dev, 0, sizeof(*dev));
54 	dev->busdevfn = busdevfn;
55 
56 	pci_read_config_dword(busdevfn, PCI_BASE_ADDRESS_1, &val);
57 	if (val & 1) {
58 		pci_read_config_dword(busdevfn, PCI_BASE_ADDRESS_0, &val);
59 	}
60 	val &= ~0xf;
61 	dev->uregs = (UNIVERSE *)val;
62 
63 	debug ("UNIVERSE-Base    : %p\n", dev->uregs);
64 
65 	/* check mapping  */
66 	debug (" Read via mapping, PCI_ID = %08X\n", readl(&dev->uregs->pci_id));
67 	if (((PCI_DEVICE <<16) | PCI_VENDOR) !=  readl(&dev->uregs->pci_id)) {
68 		printf ("UNIVERSE: Cannot read PCI-ID via Mapping: %08x\n",
69 			readl(&dev->uregs->pci_id));
70 		result = -1;
71 		goto break_30;
72 	}
73 
74 	debug ("PCI_BS = %08X\n", readl(&dev->uregs->pci_bs));
75 
76 	dev->pci_bs = readl(&dev->uregs->pci_bs);
77 
78 	/* turn off windows */
79 	for (j=0; j <4; j ++) {
80 		writel(0x00800000, &dev->uregs->lsi[j].ctl);
81 		writel(0x00800000, &dev->uregs->vsi[j].ctl);
82 	}
83 
84 	/*
85 	 * Write to Misc Register
86 	 * Set VME Bus Time-out
87 	 *   Arbitration Mode
88 	 *   DTACK Enable
89 	 */
90 	writel(0x15040000 | (readl(&dev->uregs->misc_ctl) & 0x00020000), &dev->uregs->misc_ctl);
91 
92 	if (readl(&dev->uregs->misc_ctl) & 0x00020000) {
93 		debug ("System Controller!\n"); /* test-only */
94 	} else {
95 		debug ("Not System Controller!\n"); /* test-only */
96 	}
97 
98 	/*
99 	 * Lets turn off interrupts
100 	 */
101 	writel(0x00000000,&dev->uregs->lint_en);   /* Disable interrupts in the Universe first */
102 	writel(0x0000FFFF,&dev->uregs->lint_stat); /* Clear Any Pending Interrupts */
103 	eieio();
104 	writel(0x0000, &dev->uregs->lint_map0);  /* Map all ints to 0 */
105 	writel(0x0000, &dev->uregs->lint_map1);  /* Map all ints to 0 */
106 	eieio();
107 
108 	return 0;
109 
110  break_30:
111 	free(dev);
112  break_20:
113 	return result;
114 }
115 
116 
117 /*
118  * Create pci slave window (access: pci -> vme)
119  */
120 int universe_pci_slave_window(unsigned int pciAddr, unsigned int vmeAddr, int size, int vam, int pms, int vdw)
121 {
122 	int result, i;
123 	unsigned int ctl = 0;
124 
125 	if (NULL == dev) {
126 		result = -1;
127 		goto exit_10;
128 	}
129 
130 	for (i = 0; i < 4; i++) {
131 		if (0x00800000 == readl(&dev->uregs->lsi[i].ctl))
132 			break;
133 	}
134 
135 	if (i == 4) {
136 		printf ("universe: No Image available\n");
137 		result = -1;
138 		goto exit_10;
139 	}
140 
141 	debug ("universe: Using image %d\n", i);
142 
143 	writel(pciAddr , &dev->uregs->lsi[i].bs);
144 	writel((pciAddr + size), &dev->uregs->lsi[i].bd);
145 	writel((vmeAddr - pciAddr), &dev->uregs->lsi[i].to);
146 
147 	switch (vam & VME_AM_Axx) {
148 	case VME_AM_A16:
149 		ctl = 0x00000000;
150 		break;
151 	case VME_AM_A24:
152 		ctl = 0x00010000;
153 		break;
154 	case VME_AM_A32:
155 		ctl = 0x00020000;
156 		break;
157 	}
158 
159 	switch (vam & VME_AM_Mxx) {
160 	case VME_AM_DATA:
161 		ctl |= 0x00000000;
162 		break;
163 	case VME_AM_PROG:
164 		ctl |= 0x00008000;
165 		break;
166 	}
167 
168 	if (vam & VME_AM_SUP) {
169 		ctl |= 0x00001000;
170 
171 	}
172 
173 	switch (vdw & VME_FLAG_Dxx) {
174 	case VME_FLAG_D8:
175 		ctl |= 0x00000000;
176 		break;
177 	case VME_FLAG_D16:
178 		ctl |= 0x00400000;
179 		break;
180 	case VME_FLAG_D32:
181 		ctl |= 0x00800000;
182 		break;
183 	}
184 
185 	switch (pms & PCI_MS_Mxx) {
186 	case PCI_MS_MEM:
187 		ctl |= 0x00000000;
188 		break;
189 	case PCI_MS_IO:
190 		ctl |= 0x00000001;
191 		break;
192 	case PCI_MS_CONFIG:
193 		ctl |= 0x00000002;
194 		break;
195 	}
196 
197 	ctl |= 0x80000000;    /* enable */
198 
199 	writel(ctl, &dev->uregs->lsi[i].ctl);
200 
201 	debug ("universe: window-addr=%p\n", &dev->uregs->lsi[i].ctl);
202 	debug ("universe: pci slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->lsi[i].ctl));
203 	debug ("universe: pci slave window[%d] bs=%08x\n", i, readl(&dev->uregs->lsi[i].bs));
204 	debug ("universe: pci slave window[%d] bd=%08x\n", i, readl(&dev->uregs->lsi[i].bd));
205 	debug ("universe: pci slave window[%d] to=%08x\n", i, readl(&dev->uregs->lsi[i].to));
206 
207 	return 0;
208 
209  exit_10:
210 	return -result;
211 }
212 
213 
214 /*
215  * Create vme slave window (access: vme -> pci)
216  */
217 int universe_vme_slave_window(unsigned int vmeAddr, unsigned int pciAddr, int size, int vam, int pms)
218 {
219 	int result, i;
220 	unsigned int ctl = 0;
221 
222 	if (NULL == dev) {
223 		result = -1;
224 		goto exit_10;
225 	}
226 
227 	for (i = 0; i < 4; i++) {
228 		if (0x00800000 == readl(&dev->uregs->vsi[i].ctl))
229 			break;
230 	}
231 
232 	if (i == 4) {
233 		printf ("universe: No Image available\n");
234 		result = -1;
235 		goto exit_10;
236 	}
237 
238 	debug ("universe: Using image %d\n", i);
239 
240 	writel(vmeAddr , &dev->uregs->vsi[i].bs);
241 	writel((vmeAddr + size), &dev->uregs->vsi[i].bd);
242 	writel((pciAddr - vmeAddr), &dev->uregs->vsi[i].to);
243 
244 	switch (vam & VME_AM_Axx) {
245 	case VME_AM_A16:
246 		ctl = 0x00000000;
247 		break;
248 	case VME_AM_A24:
249 		ctl = 0x00010000;
250 		break;
251 	case VME_AM_A32:
252 		ctl = 0x00020000;
253 		break;
254 	}
255 
256 	switch (vam & VME_AM_Mxx) {
257 	case VME_AM_DATA:
258 		ctl |= 0x00000000;
259 		break;
260 	case VME_AM_PROG:
261 		ctl |= 0x00800000;
262 		break;
263 	}
264 
265 	if (vam & VME_AM_SUP) {
266 		ctl |= 0x00100000;
267 
268 	}
269 
270 	switch (pms & PCI_MS_Mxx) {
271 	case PCI_MS_MEM:
272 		ctl |= 0x00000000;
273 		break;
274 	case PCI_MS_IO:
275 		ctl |= 0x00000001;
276 		break;
277 	case PCI_MS_CONFIG:
278 		ctl |= 0x00000002;
279 		break;
280 	}
281 
282 	ctl |= 0x80f00000;    /* enable */
283 
284 	writel(ctl, &dev->uregs->vsi[i].ctl);
285 
286 	debug ("universe: window-addr=%p\n", &dev->uregs->vsi[i].ctl);
287 	debug ("universe: vme slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->vsi[i].ctl));
288 	debug ("universe: vme slave window[%d] bs=%08x\n", i, readl(&dev->uregs->vsi[i].bs));
289 	debug ("universe: vme slave window[%d] bd=%08x\n", i, readl(&dev->uregs->vsi[i].bd));
290 	debug ("universe: vme slave window[%d] to=%08x\n", i, readl(&dev->uregs->vsi[i].to));
291 
292 	return 0;
293 
294  exit_10:
295 	return -result;
296 }
297 
298 
299 /*
300  * Tundra Universe configuration
301  */
302 int do_universe(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
303 {
304 	ulong addr1 = 0, addr2 = 0, size = 0, vam = 0, pms = 0, vdw = 0;
305 	char cmd = 'x';
306 
307 	/* get parameter */
308 	if (argc > 1)
309 		cmd = argv[1][0];
310 	if (argc > 2)
311 		addr1 = simple_strtoul(argv[2], NULL, 16);
312 	if (argc > 3)
313 		addr2 = simple_strtoul(argv[3], NULL, 16);
314 	if (argc > 4)
315 		size = simple_strtoul(argv[4], NULL, 16);
316 	if (argc > 5)
317 		vam = simple_strtoul(argv[5], NULL, 16);
318 	if (argc > 6)
319 		pms = simple_strtoul(argv[6], NULL, 16);
320 	if (argc > 7)
321 		vdw = simple_strtoul(argv[7], NULL, 16);
322 
323 	switch (cmd) {
324 	case 'i':		/* init */
325 		universe_init();
326 		break;
327 	case 'v':		/* vme */
328 		printf("Configuring Universe VME Slave Window (VME->PCI):\n");
329 		printf("  vme=%08lx pci=%08lx size=%08lx vam=%02lx pms=%02lx\n",
330 		       addr1, addr2, size, vam, pms);
331 		universe_vme_slave_window(addr1, addr2, size, vam, pms);
332 		break;
333 	case 'p':		/* pci */
334 		printf("Configuring Universe PCI Slave Window (PCI->VME):\n");
335 		printf("  pci=%08lx vme=%08lx size=%08lx vam=%02lx pms=%02lx vdw=%02lx\n",
336 		       addr1, addr2, size, vam, pms, vdw);
337 		universe_pci_slave_window(addr1, addr2, size, vam, pms, vdw);
338 		break;
339 	default:
340 		printf("Universe command %s not supported!\n", argv[1]);
341 	}
342 
343 	return 0;
344 }
345 
346 
347 U_BOOT_CMD(
348 	universe,	8,	1,	do_universe,
349 	"initialize and configure Turndra Universe",
350 	"init\n"
351 	"    - initialize universe\n"
352 	"universe vme [vme_addr] [pci_addr] [size] [vam] [pms]\n"
353 	"    - create vme slave window (access: vme->pci)\n"
354 	"universe pci [pci_addr] [vme_addr] [size] [vam] [pms] [vdw]\n"
355 	"    - create pci slave window (access: pci->vme)\n"
356 	"    [vam] = VMEbus Address-Modifier:  01 -> A16 Address Space\n"
357 	"                                      02 -> A24 Address Space\n"
358 	"                                      03 -> A32 Address Space\n"
359 	"                                      04 -> Supervisor AM Code\n"
360 	"                                      10 -> Data AM Code\n"
361 	"                                      20 -> Program AM Code\n"
362 	"    [pms] = PCI Memory Space:         01 -> Memory Space\n"
363 	"                                      02 -> I/O Space\n"
364 	"                                      03 -> Configuration Space\n"
365 	"    [vdw] = VMEbus Maximum Datawidth: 01 -> D8 Data Width\n"
366 	"                                      02 -> D16 Data Width\n"
367 	"                                      03 -> D32 Data Width"
368 );
369