xref: /openbmc/u-boot/cmd/ubi.c (revision 59e43c32) 
1 /*
2  * Unsorted Block Image commands
3  *
4  *  Copyright (C) 2008 Samsung Electronics
5  *  Kyungmin Park <kyungmin.park@samsung.com>
6  *
7  * Copyright 2008-2009 Stefan Roese <sr@denx.de>, DENX Software Engineering
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License version 2 as
11  * published by the Free Software Foundation.
12  */
13 
14 #include <common.h>
15 #include <command.h>
16 #include <exports.h>
17 #include <memalign.h>
18 #include <nand.h>
19 #include <onenand_uboot.h>
20 #include <linux/mtd/mtd.h>
21 #include <linux/mtd/partitions.h>
22 #include <linux/err.h>
23 #include <ubi_uboot.h>
24 #include <linux/errno.h>
25 #include <jffs2/load_kernel.h>
26 
27 #undef ubi_msg
28 #define ubi_msg(fmt, ...) printf("UBI: " fmt "\n", ##__VA_ARGS__)
29 
30 #define DEV_TYPE_NONE		0
31 #define DEV_TYPE_NAND		1
32 #define DEV_TYPE_ONENAND	2
33 #define DEV_TYPE_NOR		3
34 
35 /* Private own data */
36 static struct ubi_device *ubi;
37 static char buffer[80];
38 static int ubi_initialized;
39 
40 struct selected_dev {
41 	char part_name[80];
42 	int selected;
43 	int nr;
44 	struct mtd_info *mtd_info;
45 };
46 
47 static struct selected_dev ubi_dev;
48 
49 #ifdef CONFIG_CMD_UBIFS
50 #include <ubifs_uboot.h>
51 #endif
52 
53 static void display_volume_info(struct ubi_device *ubi)
54 {
55 	int i;
56 
57 	for (i = 0; i < (ubi->vtbl_slots + 1); i++) {
58 		if (!ubi->volumes[i])
59 			continue;	/* Empty record */
60 		ubi_dump_vol_info(ubi->volumes[i]);
61 	}
62 }
63 
64 static void display_ubi_info(struct ubi_device *ubi)
65 {
66 	ubi_msg("MTD device name:            \"%s\"", ubi->mtd->name);
67 	ubi_msg("MTD device size:            %llu MiB", ubi->flash_size >> 20);
68 	ubi_msg("physical eraseblock size:   %d bytes (%d KiB)",
69 			ubi->peb_size, ubi->peb_size >> 10);
70 	ubi_msg("logical eraseblock size:    %d bytes", ubi->leb_size);
71 	ubi_msg("number of good PEBs:        %d", ubi->good_peb_count);
72 	ubi_msg("number of bad PEBs:         %d", ubi->bad_peb_count);
73 	ubi_msg("smallest flash I/O unit:    %d", ubi->min_io_size);
74 	ubi_msg("VID header offset:          %d (aligned %d)",
75 			ubi->vid_hdr_offset, ubi->vid_hdr_aloffset);
76 	ubi_msg("data offset:                %d", ubi->leb_start);
77 	ubi_msg("max. allowed volumes:       %d", ubi->vtbl_slots);
78 	ubi_msg("wear-leveling threshold:    %d", CONFIG_MTD_UBI_WL_THRESHOLD);
79 	ubi_msg("number of internal volumes: %d", UBI_INT_VOL_COUNT);
80 	ubi_msg("number of user volumes:     %d",
81 			ubi->vol_count - UBI_INT_VOL_COUNT);
82 	ubi_msg("available PEBs:             %d", ubi->avail_pebs);
83 	ubi_msg("total number of reserved PEBs: %d", ubi->rsvd_pebs);
84 	ubi_msg("number of PEBs reserved for bad PEB handling: %d",
85 			ubi->beb_rsvd_pebs);
86 	ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec);
87 }
88 
89 static int ubi_info(int layout)
90 {
91 	if (layout)
92 		display_volume_info(ubi);
93 	else
94 		display_ubi_info(ubi);
95 
96 	return 0;
97 }
98 
99 static int ubi_check_volumename(const struct ubi_volume *vol, char *name)
100 {
101 	return strcmp(vol->name, name);
102 }
103 
104 static int ubi_check(char *name)
105 {
106 	int i;
107 
108 	for (i = 0; i < (ubi->vtbl_slots + 1); i++) {
109 		if (!ubi->volumes[i])
110 			continue;	/* Empty record */
111 
112 		if (!ubi_check_volumename(ubi->volumes[i], name))
113 			return 0;
114 	}
115 
116 	return 1;
117 }
118 
119 
120 static int verify_mkvol_req(const struct ubi_device *ubi,
121 			    const struct ubi_mkvol_req *req)
122 {
123 	int n, err = EINVAL;
124 
125 	if (req->bytes < 0 || req->alignment < 0 || req->vol_type < 0 ||
126 	    req->name_len < 0)
127 		goto bad;
128 
129 	if ((req->vol_id < 0 || req->vol_id >= ubi->vtbl_slots) &&
130 	    req->vol_id != UBI_VOL_NUM_AUTO)
131 		goto bad;
132 
133 	if (req->alignment == 0)
134 		goto bad;
135 
136 	if (req->bytes == 0) {
137 		printf("No space left in UBI device!\n");
138 		err = ENOMEM;
139 		goto bad;
140 	}
141 
142 	if (req->vol_type != UBI_DYNAMIC_VOLUME &&
143 	    req->vol_type != UBI_STATIC_VOLUME)
144 		goto bad;
145 
146 	if (req->alignment > ubi->leb_size)
147 		goto bad;
148 
149 	n = req->alignment % ubi->min_io_size;
150 	if (req->alignment != 1 && n)
151 		goto bad;
152 
153 	if (req->name_len > UBI_VOL_NAME_MAX) {
154 		printf("Name too long!\n");
155 		err = ENAMETOOLONG;
156 		goto bad;
157 	}
158 
159 	return 0;
160 bad:
161 	return err;
162 }
163 
164 static int ubi_create_vol(char *volume, int64_t size, int dynamic, int vol_id)
165 {
166 	struct ubi_mkvol_req req;
167 	int err;
168 
169 	if (dynamic)
170 		req.vol_type = UBI_DYNAMIC_VOLUME;
171 	else
172 		req.vol_type = UBI_STATIC_VOLUME;
173 
174 	req.vol_id = vol_id;
175 	req.alignment = 1;
176 	req.bytes = size;
177 
178 	strcpy(req.name, volume);
179 	req.name_len = strlen(volume);
180 	req.name[req.name_len] = '\0';
181 	req.padding1 = 0;
182 	/* It's duplicated at drivers/mtd/ubi/cdev.c */
183 	err = verify_mkvol_req(ubi, &req);
184 	if (err) {
185 		printf("verify_mkvol_req failed %d\n", err);
186 		return err;
187 	}
188 	printf("Creating %s volume %s of size %lld\n",
189 		dynamic ? "dynamic" : "static", volume, size);
190 	/* Call real ubi create volume */
191 	return ubi_create_volume(ubi, &req);
192 }
193 
194 static struct ubi_volume *ubi_find_volume(char *volume)
195 {
196 	struct ubi_volume *vol = NULL;
197 	int i;
198 
199 	for (i = 0; i < ubi->vtbl_slots; i++) {
200 		vol = ubi->volumes[i];
201 		if (vol && !strcmp(vol->name, volume))
202 			return vol;
203 	}
204 
205 	printf("Volume %s not found!\n", volume);
206 	return NULL;
207 }
208 
209 static int ubi_remove_vol(char *volume)
210 {
211 	int err, reserved_pebs, i;
212 	struct ubi_volume *vol;
213 
214 	vol = ubi_find_volume(volume);
215 	if (vol == NULL)
216 		return ENODEV;
217 
218 	printf("Remove UBI volume %s (id %d)\n", vol->name, vol->vol_id);
219 
220 	if (ubi->ro_mode) {
221 		printf("It's read-only mode\n");
222 		err = EROFS;
223 		goto out_err;
224 	}
225 
226 	err = ubi_change_vtbl_record(ubi, vol->vol_id, NULL);
227 	if (err) {
228 		printf("Error changing Vol tabel record err=%x\n", err);
229 		goto out_err;
230 	}
231 	reserved_pebs = vol->reserved_pebs;
232 	for (i = 0; i < vol->reserved_pebs; i++) {
233 		err = ubi_eba_unmap_leb(ubi, vol, i);
234 		if (err)
235 			goto out_err;
236 	}
237 
238 	kfree(vol->eba_tbl);
239 	ubi->volumes[vol->vol_id]->eba_tbl = NULL;
240 	ubi->volumes[vol->vol_id] = NULL;
241 
242 	ubi->rsvd_pebs -= reserved_pebs;
243 	ubi->avail_pebs += reserved_pebs;
244 	i = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs;
245 	if (i > 0) {
246 		i = ubi->avail_pebs >= i ? i : ubi->avail_pebs;
247 		ubi->avail_pebs -= i;
248 		ubi->rsvd_pebs += i;
249 		ubi->beb_rsvd_pebs += i;
250 		if (i > 0)
251 			ubi_msg("reserve more %d PEBs", i);
252 	}
253 	ubi->vol_count -= 1;
254 
255 	return 0;
256 out_err:
257 	ubi_err(ubi, "cannot remove volume %s, error %d", volume, err);
258 	if (err < 0)
259 		err = -err;
260 	return err;
261 }
262 
263 static int ubi_volume_continue_write(char *volume, void *buf, size_t size)
264 {
265 	int err = 1;
266 	struct ubi_volume *vol;
267 
268 	vol = ubi_find_volume(volume);
269 	if (vol == NULL)
270 		return ENODEV;
271 
272 	err = ubi_more_update_data(ubi, vol, buf, size);
273 	if (err < 0) {
274 		printf("Couldnt or partially wrote data\n");
275 		return -err;
276 	}
277 
278 	if (err) {
279 		size = err;
280 
281 		err = ubi_check_volume(ubi, vol->vol_id);
282 		if (err < 0)
283 			return -err;
284 
285 		if (err) {
286 			ubi_warn(ubi, "volume %d on UBI device %d is corrupt",
287 				 vol->vol_id, ubi->ubi_num);
288 			vol->corrupted = 1;
289 		}
290 
291 		vol->checked = 1;
292 		ubi_gluebi_updated(vol);
293 	}
294 
295 	return 0;
296 }
297 
298 int ubi_volume_begin_write(char *volume, void *buf, size_t size,
299 	size_t full_size)
300 {
301 	int err = 1;
302 	int rsvd_bytes = 0;
303 	struct ubi_volume *vol;
304 
305 	vol = ubi_find_volume(volume);
306 	if (vol == NULL)
307 		return ENODEV;
308 
309 	rsvd_bytes = vol->reserved_pebs * (ubi->leb_size - vol->data_pad);
310 	if (size > rsvd_bytes) {
311 		printf("size > volume size! Aborting!\n");
312 		return EINVAL;
313 	}
314 
315 	err = ubi_start_update(ubi, vol, full_size);
316 	if (err < 0) {
317 		printf("Cannot start volume update\n");
318 		return -err;
319 	}
320 
321 	return ubi_volume_continue_write(volume, buf, size);
322 }
323 
324 int ubi_volume_write(char *volume, void *buf, size_t size)
325 {
326 	return ubi_volume_begin_write(volume, buf, size, size);
327 }
328 
329 int ubi_volume_read(char *volume, char *buf, size_t size)
330 {
331 	int err, lnum, off, len, tbuf_size;
332 	void *tbuf;
333 	unsigned long long tmp;
334 	struct ubi_volume *vol;
335 	loff_t offp = 0;
336 	size_t len_read;
337 
338 	vol = ubi_find_volume(volume);
339 	if (vol == NULL)
340 		return ENODEV;
341 
342 	if (vol->updating) {
343 		printf("updating");
344 		return EBUSY;
345 	}
346 	if (vol->upd_marker) {
347 		printf("damaged volume, update marker is set");
348 		return EBADF;
349 	}
350 	if (offp == vol->used_bytes)
351 		return 0;
352 
353 	if (size == 0) {
354 		printf("No size specified -> Using max size (%lld)\n", vol->used_bytes);
355 		size = vol->used_bytes;
356 	}
357 
358 	printf("Read %zu bytes from volume %s to %p\n", size, volume, buf);
359 
360 	if (vol->corrupted)
361 		printf("read from corrupted volume %d", vol->vol_id);
362 	if (offp + size > vol->used_bytes)
363 		size = vol->used_bytes - offp;
364 
365 	tbuf_size = vol->usable_leb_size;
366 	if (size < tbuf_size)
367 		tbuf_size = ALIGN(size, ubi->min_io_size);
368 	tbuf = malloc_cache_aligned(tbuf_size);
369 	if (!tbuf) {
370 		printf("NO MEM\n");
371 		return ENOMEM;
372 	}
373 	len = size > tbuf_size ? tbuf_size : size;
374 
375 	tmp = offp;
376 	off = do_div(tmp, vol->usable_leb_size);
377 	lnum = tmp;
378 	len_read = size;
379 	do {
380 		if (off + len >= vol->usable_leb_size)
381 			len = vol->usable_leb_size - off;
382 
383 		err = ubi_eba_read_leb(ubi, vol, lnum, tbuf, off, len, 0);
384 		if (err) {
385 			printf("read err %x\n", err);
386 			err = -err;
387 			break;
388 		}
389 		off += len;
390 		if (off == vol->usable_leb_size) {
391 			lnum += 1;
392 			off -= vol->usable_leb_size;
393 		}
394 
395 		size -= len;
396 		offp += len;
397 
398 		memcpy(buf, tbuf, len);
399 
400 		buf += len;
401 		len = size > tbuf_size ? tbuf_size : size;
402 	} while (size);
403 
404 	if (!size)
405 		env_set_hex("filesize", len_read);
406 
407 	free(tbuf);
408 	return err;
409 }
410 
411 static int ubi_dev_scan(struct mtd_info *info, char *ubidev,
412 		const char *vid_header_offset)
413 {
414 	struct mtd_device *dev;
415 	struct part_info *part;
416 	struct mtd_partition mtd_part;
417 	char ubi_mtd_param_buffer[80];
418 	u8 pnum;
419 	int err;
420 
421 	if (find_dev_and_part(ubidev, &dev, &pnum, &part) != 0)
422 		return 1;
423 
424 	sprintf(buffer, "mtd=%d", pnum);
425 	memset(&mtd_part, 0, sizeof(mtd_part));
426 	mtd_part.name = buffer;
427 	mtd_part.size = part->size;
428 	mtd_part.offset = part->offset;
429 	add_mtd_partitions(info, &mtd_part, 1);
430 
431 	strcpy(ubi_mtd_param_buffer, buffer);
432 	if (vid_header_offset)
433 		sprintf(ubi_mtd_param_buffer, "mtd=%d,%s", pnum,
434 				vid_header_offset);
435 	err = ubi_mtd_param_parse(ubi_mtd_param_buffer, NULL);
436 	if (err) {
437 		del_mtd_partitions(info);
438 		return -err;
439 	}
440 
441 	err = ubi_init();
442 	if (err) {
443 		del_mtd_partitions(info);
444 		return -err;
445 	}
446 
447 	ubi_initialized = 1;
448 
449 	return 0;
450 }
451 
452 int ubi_detach(void)
453 {
454 	if (mtdparts_init() != 0) {
455 		printf("Error initializing mtdparts!\n");
456 		return 1;
457 	}
458 
459 #ifdef CONFIG_CMD_UBIFS
460 	/*
461 	 * Automatically unmount UBIFS partition when user
462 	 * changes the UBI device. Otherwise the following
463 	 * UBIFS commands will crash.
464 	 */
465 	if (ubifs_is_mounted())
466 		cmd_ubifs_umount();
467 #endif
468 
469 	/*
470 	 * Call ubi_exit() before re-initializing the UBI subsystem
471 	 */
472 	if (ubi_initialized) {
473 		ubi_exit();
474 		del_mtd_partitions(ubi_dev.mtd_info);
475 		ubi_initialized = 0;
476 	}
477 
478 	ubi_dev.selected = 0;
479 	return 0;
480 }
481 
482 int ubi_part(char *part_name, const char *vid_header_offset)
483 {
484 	int err = 0;
485 	char mtd_dev[16];
486 	struct mtd_device *dev;
487 	struct part_info *part;
488 	u8 pnum;
489 
490 	ubi_detach();
491 	/*
492 	 * Search the mtd device number where this partition
493 	 * is located
494 	 */
495 	if (find_dev_and_part(part_name, &dev, &pnum, &part)) {
496 		printf("Partition %s not found!\n", part_name);
497 		return 1;
498 	}
499 	sprintf(mtd_dev, "%s%d", MTD_DEV_TYPE(dev->id->type), dev->id->num);
500 	ubi_dev.mtd_info = get_mtd_device_nm(mtd_dev);
501 	if (IS_ERR(ubi_dev.mtd_info)) {
502 		printf("Partition %s not found on device %s!\n", part_name,
503 		       mtd_dev);
504 		return 1;
505 	}
506 
507 	ubi_dev.selected = 1;
508 
509 	strcpy(ubi_dev.part_name, part_name);
510 	err = ubi_dev_scan(ubi_dev.mtd_info, ubi_dev.part_name,
511 			vid_header_offset);
512 	if (err) {
513 		printf("UBI init error %d\n", err);
514 		printf("Please check, if the correct MTD partition is used (size big enough?)\n");
515 		ubi_dev.selected = 0;
516 		return err;
517 	}
518 
519 	ubi = ubi_devices[0];
520 
521 	return 0;
522 }
523 
524 static int do_ubi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
525 {
526 	int64_t size = 0;
527 	ulong addr = 0;
528 
529 	if (argc < 2)
530 		return CMD_RET_USAGE;
531 
532 
533 	if (strcmp(argv[1], "detach") == 0) {
534 		if (argc < 2)
535 			return CMD_RET_USAGE;
536 
537 		return ubi_detach();
538 	}
539 
540 
541 	if (strcmp(argv[1], "part") == 0) {
542 		const char *vid_header_offset = NULL;
543 
544 		/* Print current partition */
545 		if (argc == 2) {
546 			if (!ubi_dev.selected) {
547 				printf("Error, no UBI device/partition selected!\n");
548 				return 1;
549 			}
550 
551 			printf("Device %d: %s, partition %s\n",
552 			       ubi_dev.nr, ubi_dev.mtd_info->name, ubi_dev.part_name);
553 			return 0;
554 		}
555 
556 		if (argc < 3)
557 			return CMD_RET_USAGE;
558 
559 		if (argc > 3)
560 			vid_header_offset = argv[3];
561 
562 		return ubi_part(argv[2], vid_header_offset);
563 	}
564 
565 	if ((strcmp(argv[1], "part") != 0) && (!ubi_dev.selected)) {
566 		printf("Error, no UBI device/partition selected!\n");
567 		return 1;
568 	}
569 
570 	if (strcmp(argv[1], "info") == 0) {
571 		int layout = 0;
572 		if (argc > 2 && !strncmp(argv[2], "l", 1))
573 			layout = 1;
574 		return ubi_info(layout);
575 	}
576 
577 	if (strcmp(argv[1], "check") == 0) {
578 		if (argc > 2)
579 			return ubi_check(argv[2]);
580 
581 		printf("Error, no volume name passed\n");
582 		return 1;
583 	}
584 
585 	if (strncmp(argv[1], "create", 6) == 0) {
586 		int dynamic = 1;	/* default: dynamic volume */
587 		int id = UBI_VOL_NUM_AUTO;
588 
589 		/* Use maximum available size */
590 		size = 0;
591 
592 		/* E.g., create volume size type vol_id */
593 		if (argc == 6) {
594 			id = simple_strtoull(argv[5], NULL, 16);
595 			argc--;
596 		}
597 
598 		/* E.g., create volume size type */
599 		if (argc == 5) {
600 			if (strncmp(argv[4], "s", 1) == 0)
601 				dynamic = 0;
602 			else if (strncmp(argv[4], "d", 1) != 0) {
603 				printf("Incorrect type\n");
604 				return 1;
605 			}
606 			argc--;
607 		}
608 		/* E.g., create volume size */
609 		if (argc == 4) {
610 			if (argv[3][0] != '-')
611 				size = simple_strtoull(argv[3], NULL, 16);
612 			argc--;
613 		}
614 		/* Use maximum available size */
615 		if (!size) {
616 			size = (int64_t)ubi->avail_pebs * ubi->leb_size;
617 			printf("No size specified -> Using max size (%lld)\n", size);
618 		}
619 		/* E.g., create volume */
620 		if (argc == 3)
621 			return ubi_create_vol(argv[2], size, dynamic, id);
622 	}
623 
624 	if (strncmp(argv[1], "remove", 6) == 0) {
625 		/* E.g., remove volume */
626 		if (argc == 3)
627 			return ubi_remove_vol(argv[2]);
628 	}
629 
630 	if (strncmp(argv[1], "write", 5) == 0) {
631 		int ret;
632 
633 		if (argc < 5) {
634 			printf("Please see usage\n");
635 			return 1;
636 		}
637 
638 		addr = simple_strtoul(argv[2], NULL, 16);
639 		size = simple_strtoul(argv[4], NULL, 16);
640 
641 		if (strlen(argv[1]) == 10 &&
642 		    strncmp(argv[1] + 5, ".part", 5) == 0) {
643 			if (argc < 6) {
644 				ret = ubi_volume_continue_write(argv[3],
645 						(void *)addr, size);
646 			} else {
647 				size_t full_size;
648 				full_size = simple_strtoul(argv[5], NULL, 16);
649 				ret = ubi_volume_begin_write(argv[3],
650 						(void *)addr, size, full_size);
651 			}
652 		} else {
653 			ret = ubi_volume_write(argv[3], (void *)addr, size);
654 		}
655 		if (!ret) {
656 			printf("%lld bytes written to volume %s\n", size,
657 			       argv[3]);
658 		}
659 
660 		return ret;
661 	}
662 
663 	if (strncmp(argv[1], "read", 4) == 0) {
664 		size = 0;
665 
666 		/* E.g., read volume size */
667 		if (argc == 5) {
668 			size = simple_strtoul(argv[4], NULL, 16);
669 			argc--;
670 		}
671 
672 		/* E.g., read volume */
673 		if (argc == 4) {
674 			addr = simple_strtoul(argv[2], NULL, 16);
675 			argc--;
676 		}
677 
678 		if (argc == 3) {
679 			return ubi_volume_read(argv[3], (char *)addr, size);
680 		}
681 	}
682 
683 	printf("Please see usage\n");
684 	return 1;
685 }
686 
687 U_BOOT_CMD(
688 	ubi, 6, 1, do_ubi,
689 	"ubi commands",
690 	"detach"
691 		" - detach ubi from a mtd partition\n"
692 	"ubi part [part] [offset]\n"
693 		" - Show or set current partition (with optional VID"
694 		" header offset)\n"
695 	"ubi info [l[ayout]]"
696 		" - Display volume and ubi layout information\n"
697 	"ubi check volumename"
698 		" - check if volumename exists\n"
699 	"ubi create[vol] volume [size] [type] [id]\n"
700 		" - create volume name with size ('-' for maximum"
701 		" available size)\n"
702 	"ubi write[vol] address volume size"
703 		" - Write volume from address with size\n"
704 	"ubi write.part address volume size [fullsize]\n"
705 		" - Write part of a volume from address\n"
706 	"ubi read[vol] address volume [size]"
707 		" - Read volume to address with size\n"
708 	"ubi remove[vol] volume"
709 		" - Remove volume\n"
710 	"[Legends]\n"
711 	" volume: character name\n"
712 	" size: specified in bytes\n"
713 	" type: s[tatic] or d[ynamic] (default=dynamic)"
714 );
715