1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Command for accessing SPI flash.
4 *
5 * Copyright (C) 2008 Atmel Corporation
6 */
7
8 #include <common.h>
9 #include <div64.h>
10 #include <dm.h>
11 #include <malloc.h>
12 #include <mapmem.h>
13 #include <spi.h>
14 #include <spi_flash.h>
15 #include <jffs2/jffs2.h>
16 #include <linux/mtd/mtd.h>
17
18 #include <asm/io.h>
19 #include <dm/device-internal.h>
20
21 static struct spi_flash *flash;
22
23 /*
24 * This function computes the length argument for the erase command.
25 * The length on which the command is to operate can be given in two forms:
26 * 1. <cmd> offset len - operate on <'offset', 'len')
27 * 2. <cmd> offset +len - operate on <'offset', 'round_up(len)')
28 * If the second form is used and the length doesn't fall on the
29 * sector boundary, than it will be adjusted to the next sector boundary.
30 * If it isn't in the flash, the function will fail (return -1).
31 * Input:
32 * arg: length specification (i.e. both command arguments)
33 * Output:
34 * len: computed length for operation
35 * Return:
36 * 1: success
37 * -1: failure (bad format, bad address).
38 */
sf_parse_len_arg(char * arg,ulong * len)39 static int sf_parse_len_arg(char *arg, ulong *len)
40 {
41 char *ep;
42 char round_up_len; /* indicates if the "+length" form used */
43 ulong len_arg;
44
45 round_up_len = 0;
46 if (*arg == '+') {
47 round_up_len = 1;
48 ++arg;
49 }
50
51 len_arg = simple_strtoul(arg, &ep, 16);
52 if (ep == arg || *ep != '\0')
53 return -1;
54
55 if (round_up_len && flash->sector_size > 0)
56 *len = ROUND(len_arg, flash->sector_size);
57 else
58 *len = len_arg;
59
60 return 1;
61 }
62
63 /**
64 * This function takes a byte length and a delta unit of time to compute the
65 * approximate bytes per second
66 *
67 * @param len amount of bytes currently processed
68 * @param start_ms start time of processing in ms
69 * @return bytes per second if OK, 0 on error
70 */
bytes_per_second(unsigned int len,ulong start_ms)71 static ulong bytes_per_second(unsigned int len, ulong start_ms)
72 {
73 /* less accurate but avoids overflow */
74 if (len >= ((unsigned int) -1) / 1024)
75 return len / (max(get_timer(start_ms) / 1024, 1UL));
76 else
77 return 1024 * len / max(get_timer(start_ms), 1UL);
78 }
79
do_spi_flash_probe(int argc,char * const argv[])80 static int do_spi_flash_probe(int argc, char * const argv[])
81 {
82 unsigned int bus = CONFIG_SF_DEFAULT_BUS;
83 unsigned int cs = CONFIG_SF_DEFAULT_CS;
84 unsigned int speed = CONFIG_SF_DEFAULT_SPEED;
85 unsigned int mode = CONFIG_SF_DEFAULT_MODE;
86 char *endp;
87 #ifdef CONFIG_DM_SPI_FLASH
88 struct udevice *new, *bus_dev;
89 int ret;
90 /* In DM mode defaults will be taken from DT */
91 speed = 0, mode = 0;
92 #else
93 struct spi_flash *new;
94 #endif
95
96 if (argc >= 2) {
97 cs = simple_strtoul(argv[1], &endp, 0);
98 if (*argv[1] == 0 || (*endp != 0 && *endp != ':'))
99 return -1;
100 if (*endp == ':') {
101 if (endp[1] == 0)
102 return -1;
103
104 bus = cs;
105 cs = simple_strtoul(endp + 1, &endp, 0);
106 if (*endp != 0)
107 return -1;
108 }
109 }
110
111 if (argc >= 3) {
112 speed = simple_strtoul(argv[2], &endp, 0);
113 if (*argv[2] == 0 || *endp != 0)
114 return -1;
115 }
116 if (argc >= 4) {
117 mode = simple_strtoul(argv[3], &endp, 16);
118 if (*argv[3] == 0 || *endp != 0)
119 return -1;
120 }
121
122 #ifdef CONFIG_DM_SPI_FLASH
123 /* Remove the old device, otherwise probe will just be a nop */
124 ret = spi_find_bus_and_cs(bus, cs, &bus_dev, &new);
125 if (!ret) {
126 device_remove(new, DM_REMOVE_NORMAL);
127 }
128 flash = NULL;
129 ret = spi_flash_probe_bus_cs(bus, cs, speed, mode, &new);
130 if (ret) {
131 printf("Failed to initialize SPI flash at %u:%u (error %d)\n",
132 bus, cs, ret);
133 return 1;
134 }
135
136 flash = dev_get_uclass_priv(new);
137 #else
138 if (flash)
139 spi_flash_free(flash);
140
141 new = spi_flash_probe(bus, cs, speed, mode);
142 flash = new;
143
144 if (!new) {
145 printf("Failed to initialize SPI flash at %u:%u\n", bus, cs);
146 return 1;
147 }
148
149 flash = new;
150 #endif
151
152 return 0;
153 }
154
155 /**
156 * Write a block of data to SPI flash, first checking if it is different from
157 * what is already there.
158 *
159 * If the data being written is the same, then *skipped is incremented by len.
160 *
161 * @param flash flash context pointer
162 * @param offset flash offset to write
163 * @param len number of bytes to write
164 * @param buf buffer to write from
165 * @param cmp_buf read buffer to use to compare data
166 * @param skipped Count of skipped data (incremented by this function)
167 * @return NULL if OK, else a string containing the stage which failed
168 */
spi_flash_update_block(struct spi_flash * flash,u32 offset,size_t len,const char * buf,char * cmp_buf,size_t * skipped)169 static const char *spi_flash_update_block(struct spi_flash *flash, u32 offset,
170 size_t len, const char *buf, char *cmp_buf, size_t *skipped)
171 {
172 char *ptr = (char *)buf;
173
174 debug("offset=%#x, sector_size=%#x, len=%#zx\n",
175 offset, flash->sector_size, len);
176 /* Read the entire sector so to allow for rewriting */
177 if (spi_flash_read(flash, offset, flash->sector_size, cmp_buf))
178 return "read";
179 /* Compare only what is meaningful (len) */
180 if (memcmp(cmp_buf, buf, len) == 0) {
181 debug("Skip region %x size %zx: no change\n",
182 offset, len);
183 *skipped += len;
184 return NULL;
185 }
186 /* Erase the entire sector */
187 if (spi_flash_erase(flash, offset, flash->sector_size))
188 return "erase";
189 /* If it's a partial sector, copy the data into the temp-buffer */
190 if (len != flash->sector_size) {
191 memcpy(cmp_buf, buf, len);
192 ptr = cmp_buf;
193 }
194 /* Write one complete sector */
195 if (spi_flash_write(flash, offset, flash->sector_size, ptr))
196 return "write";
197
198 return NULL;
199 }
200
201 /**
202 * Update an area of SPI flash by erasing and writing any blocks which need
203 * to change. Existing blocks with the correct data are left unchanged.
204 *
205 * @param flash flash context pointer
206 * @param offset flash offset to write
207 * @param len number of bytes to write
208 * @param buf buffer to write from
209 * @return 0 if ok, 1 on error
210 */
spi_flash_update(struct spi_flash * flash,u32 offset,size_t len,const char * buf)211 static int spi_flash_update(struct spi_flash *flash, u32 offset,
212 size_t len, const char *buf)
213 {
214 const char *err_oper = NULL;
215 char *cmp_buf;
216 const char *end = buf + len;
217 size_t todo; /* number of bytes to do in this pass */
218 size_t skipped = 0; /* statistics */
219 const ulong start_time = get_timer(0);
220 size_t scale = 1;
221 const char *start_buf = buf;
222 ulong delta;
223
224 if (end - buf >= 200)
225 scale = (end - buf) / 100;
226 cmp_buf = memalign(ARCH_DMA_MINALIGN, flash->sector_size);
227 if (cmp_buf) {
228 ulong last_update = get_timer(0);
229
230 for (; buf < end && !err_oper; buf += todo, offset += todo) {
231 todo = min_t(size_t, end - buf, flash->sector_size);
232 if (get_timer(last_update) > 100) {
233 printf(" \rUpdating, %zu%% %lu B/s",
234 100 - (end - buf) / scale,
235 bytes_per_second(buf - start_buf,
236 start_time));
237 last_update = get_timer(0);
238 }
239 err_oper = spi_flash_update_block(flash, offset, todo,
240 buf, cmp_buf, &skipped);
241 }
242 } else {
243 err_oper = "malloc";
244 }
245 free(cmp_buf);
246 putc('\r');
247 if (err_oper) {
248 printf("SPI flash failed in %s step\n", err_oper);
249 return 1;
250 }
251
252 delta = get_timer(start_time);
253 printf("%zu bytes written, %zu bytes skipped", len - skipped,
254 skipped);
255 printf(" in %ld.%lds, speed %ld B/s\n",
256 delta / 1000, delta % 1000, bytes_per_second(len, start_time));
257
258 return 0;
259 }
260
do_spi_flash_read_write(int argc,char * const argv[])261 static int do_spi_flash_read_write(int argc, char * const argv[])
262 {
263 unsigned long addr;
264 void *buf;
265 char *endp;
266 int ret = 1;
267 int dev = 0;
268 loff_t offset, len, maxsize;
269
270 if (argc < 3)
271 return -1;
272
273 addr = simple_strtoul(argv[1], &endp, 16);
274 if (*argv[1] == 0 || *endp != 0)
275 return -1;
276
277 if (mtd_arg_off_size(argc - 2, &argv[2], &dev, &offset, &len,
278 &maxsize, MTD_DEV_TYPE_NOR, flash->size))
279 return -1;
280
281 /* Consistency checking */
282 if (offset + len > flash->size) {
283 printf("ERROR: attempting %s past flash size (%#x)\n",
284 argv[0], flash->size);
285 return 1;
286 }
287
288 buf = map_physmem(addr, len, MAP_WRBACK);
289 if (!buf && addr) {
290 puts("Failed to map physical memory\n");
291 return 1;
292 }
293
294 if (strcmp(argv[0], "update") == 0) {
295 ret = spi_flash_update(flash, offset, len, buf);
296 } else if (strncmp(argv[0], "read", 4) == 0 ||
297 strncmp(argv[0], "write", 5) == 0) {
298 int read;
299
300 read = strncmp(argv[0], "read", 4) == 0;
301 if (read)
302 ret = spi_flash_read(flash, offset, len, buf);
303 else
304 ret = spi_flash_write(flash, offset, len, buf);
305
306 printf("SF: %zu bytes @ %#x %s: ", (size_t)len, (u32)offset,
307 read ? "Read" : "Written");
308 if (ret)
309 printf("ERROR %d\n", ret);
310 else
311 printf("OK\n");
312 }
313
314 unmap_physmem(buf, len);
315
316 return ret == 0 ? 0 : 1;
317 }
318
do_spi_flash_erase(int argc,char * const argv[])319 static int do_spi_flash_erase(int argc, char * const argv[])
320 {
321 int ret;
322 int dev = 0;
323 loff_t offset, len, maxsize;
324 ulong size;
325
326 if (argc < 3)
327 return -1;
328
329 if (mtd_arg_off(argv[1], &dev, &offset, &len, &maxsize,
330 MTD_DEV_TYPE_NOR, flash->size))
331 return -1;
332
333 ret = sf_parse_len_arg(argv[2], &size);
334 if (ret != 1)
335 return -1;
336
337 /* Consistency checking */
338 if (offset + size > flash->size) {
339 printf("ERROR: attempting %s past flash size (%#x)\n",
340 argv[0], flash->size);
341 return 1;
342 }
343
344 ret = spi_flash_erase(flash, offset, size);
345 printf("SF: %zu bytes @ %#x Erased: %s\n", (size_t)size, (u32)offset,
346 ret ? "ERROR" : "OK");
347
348 return ret == 0 ? 0 : 1;
349 }
350
do_spi_protect(int argc,char * const argv[])351 static int do_spi_protect(int argc, char * const argv[])
352 {
353 int ret = 0;
354 loff_t start, len;
355 bool prot = false;
356
357 if (argc != 4)
358 return -1;
359
360 if (!str2off(argv[2], &start)) {
361 puts("start sector is not a valid number\n");
362 return 1;
363 }
364
365 if (!str2off(argv[3], &len)) {
366 puts("len is not a valid number\n");
367 return 1;
368 }
369
370 if (strcmp(argv[1], "lock") == 0)
371 prot = true;
372 else if (strcmp(argv[1], "unlock") == 0)
373 prot = false;
374 else
375 return -1; /* Unknown parameter */
376
377 ret = spi_flash_protect(flash, start, len, prot);
378
379 return ret == 0 ? 0 : 1;
380 }
381
382 #ifdef CONFIG_CMD_SF_TEST
383 enum {
384 STAGE_ERASE,
385 STAGE_CHECK,
386 STAGE_WRITE,
387 STAGE_READ,
388
389 STAGE_COUNT,
390 };
391
392 static char *stage_name[STAGE_COUNT] = {
393 "erase",
394 "check",
395 "write",
396 "read",
397 };
398
399 struct test_info {
400 int stage;
401 int bytes;
402 unsigned base_ms;
403 unsigned time_ms[STAGE_COUNT];
404 };
405
show_time(struct test_info * test,int stage)406 static void show_time(struct test_info *test, int stage)
407 {
408 uint64_t speed; /* KiB/s */
409 int bps; /* Bits per second */
410
411 speed = (long long)test->bytes * 1000;
412 if (test->time_ms[stage])
413 do_div(speed, test->time_ms[stage] * 1024);
414 bps = speed * 8;
415
416 printf("%d %s: %u ticks, %d KiB/s %d.%03d Mbps\n", stage,
417 stage_name[stage], test->time_ms[stage],
418 (int)speed, bps / 1000, bps % 1000);
419 }
420
spi_test_next_stage(struct test_info * test)421 static void spi_test_next_stage(struct test_info *test)
422 {
423 test->time_ms[test->stage] = get_timer(test->base_ms);
424 show_time(test, test->stage);
425 test->base_ms = get_timer(0);
426 test->stage++;
427 }
428
429 /**
430 * Run a test on the SPI flash
431 *
432 * @param flash SPI flash to use
433 * @param buf Source buffer for data to write
434 * @param len Size of data to read/write
435 * @param offset Offset within flash to check
436 * @param vbuf Verification buffer
437 * @return 0 if ok, -1 on error
438 */
spi_flash_test(struct spi_flash * flash,uint8_t * buf,ulong len,ulong offset,uint8_t * vbuf)439 static int spi_flash_test(struct spi_flash *flash, uint8_t *buf, ulong len,
440 ulong offset, uint8_t *vbuf)
441 {
442 struct test_info test;
443 int i;
444
445 printf("SPI flash test:\n");
446 memset(&test, '\0', sizeof(test));
447 test.base_ms = get_timer(0);
448 test.bytes = len;
449 if (spi_flash_erase(flash, offset, len)) {
450 printf("Erase failed\n");
451 return -1;
452 }
453 spi_test_next_stage(&test);
454
455 if (spi_flash_read(flash, offset, len, vbuf)) {
456 printf("Check read failed\n");
457 return -1;
458 }
459 for (i = 0; i < len; i++) {
460 if (vbuf[i] != 0xff) {
461 printf("Check failed at %d\n", i);
462 print_buffer(i, vbuf + i, 1,
463 min_t(uint, len - i, 0x40), 0);
464 return -1;
465 }
466 }
467 spi_test_next_stage(&test);
468
469 if (spi_flash_write(flash, offset, len, buf)) {
470 printf("Write failed\n");
471 return -1;
472 }
473 memset(vbuf, '\0', len);
474 spi_test_next_stage(&test);
475
476 if (spi_flash_read(flash, offset, len, vbuf)) {
477 printf("Read failed\n");
478 return -1;
479 }
480 spi_test_next_stage(&test);
481
482 for (i = 0; i < len; i++) {
483 if (buf[i] != vbuf[i]) {
484 printf("Verify failed at %d, good data:\n", i);
485 print_buffer(i, buf + i, 1,
486 min_t(uint, len - i, 0x40), 0);
487 printf("Bad data:\n");
488 print_buffer(i, vbuf + i, 1,
489 min_t(uint, len - i, 0x40), 0);
490 return -1;
491 }
492 }
493 printf("Test passed\n");
494 for (i = 0; i < STAGE_COUNT; i++)
495 show_time(&test, i);
496
497 return 0;
498 }
499
do_spi_flash_test(int argc,char * const argv[])500 static int do_spi_flash_test(int argc, char * const argv[])
501 {
502 unsigned long offset;
503 unsigned long len;
504 uint8_t *buf, *from;
505 char *endp;
506 uint8_t *vbuf;
507 int ret;
508
509 if (argc < 3)
510 return -1;
511 offset = simple_strtoul(argv[1], &endp, 16);
512 if (*argv[1] == 0 || *endp != 0)
513 return -1;
514 len = simple_strtoul(argv[2], &endp, 16);
515 if (*argv[2] == 0 || *endp != 0)
516 return -1;
517
518 vbuf = memalign(ARCH_DMA_MINALIGN, len);
519 if (!vbuf) {
520 printf("Cannot allocate memory (%lu bytes)\n", len);
521 return 1;
522 }
523 buf = memalign(ARCH_DMA_MINALIGN, len);
524 if (!buf) {
525 free(vbuf);
526 printf("Cannot allocate memory (%lu bytes)\n", len);
527 return 1;
528 }
529
530 from = map_sysmem(CONFIG_SYS_TEXT_BASE, 0);
531 memcpy(buf, from, len);
532 ret = spi_flash_test(flash, buf, len, offset, vbuf);
533 free(vbuf);
534 free(buf);
535 if (ret) {
536 printf("Test failed\n");
537 return 1;
538 }
539
540 return 0;
541 }
542 #endif /* CONFIG_CMD_SF_TEST */
543
544 #ifdef CONFIG_ASPEED_SPI_FLASH_WRITE_PROTECTION
do_spi_flash_ctrl_wlock(int argc,char * const argv[])545 static int do_spi_flash_ctrl_wlock(int argc, char * const argv[])
546 {
547 int ret = 0;
548 unsigned long offset;
549 unsigned long len;
550 char *endp;
551 bool wlock;
552
553 if (argc != 4)
554 return -1;
555
556 offset = simple_strtoul(argv[2], &endp, 16);
557 if (*argv[2] == 0 || *endp != 0)
558 return -1;
559
560 len = simple_strtoul(argv[3], &endp, 16);
561 if (*argv[3] == 0 || *endp != 0)
562 return -1;
563
564 if (strcmp(argv[1], "lock") == 0)
565 wlock = true;
566 else if (strcmp(argv[1], "unlock") == 0)
567 wlock = false;
568 else
569 return -1; /* Unknown parameter */
570
571 if (wlock)
572 ret = spi_flash_ctrl_wlock(flash, (u32)offset, (size_t)len);
573 else
574 ret = spi_flash_ctrl_wunlock(flash, (u32)offset, (size_t)len);
575
576 return ret == 0 ? 0 : 1;
577 }
578 #endif
579
do_spi_flash(cmd_tbl_t * cmdtp,int flag,int argc,char * const argv[])580 static int do_spi_flash(cmd_tbl_t *cmdtp, int flag, int argc,
581 char * const argv[])
582 {
583 const char *cmd;
584 int ret;
585
586 /* need at least two arguments */
587 if (argc < 2)
588 goto usage;
589
590 cmd = argv[1];
591 --argc;
592 ++argv;
593
594 if (strcmp(cmd, "probe") == 0) {
595 ret = do_spi_flash_probe(argc, argv);
596 goto done;
597 }
598
599 /* The remaining commands require a selected device */
600 if (!flash) {
601 puts("No SPI flash selected. Please run `sf probe'\n");
602 return 1;
603 }
604
605 if (strcmp(cmd, "read") == 0 || strcmp(cmd, "write") == 0 ||
606 strcmp(cmd, "update") == 0)
607 ret = do_spi_flash_read_write(argc, argv);
608 else if (strcmp(cmd, "erase") == 0)
609 ret = do_spi_flash_erase(argc, argv);
610 else if (strcmp(cmd, "protect") == 0)
611 ret = do_spi_protect(argc, argv);
612 #ifdef CONFIG_CMD_SF_TEST
613 else if (!strcmp(cmd, "test"))
614 ret = do_spi_flash_test(argc, argv);
615 #endif
616 #ifdef CONFIG_ASPEED_SPI_FLASH_WRITE_PROTECTION
617 else if (!strcmp(cmd, "ctrl_wlock"))
618 ret = do_spi_flash_ctrl_wlock(argc, argv);
619 #endif
620 else
621 ret = -1;
622
623 done:
624 if (ret != -1)
625 return ret;
626
627 usage:
628 return CMD_RET_USAGE;
629 }
630
631 #ifdef CONFIG_CMD_SF_TEST
632 #define SF_TEST_HELP "\nsf test offset len " \
633 "- run a very basic destructive test"
634 #else
635 #define SF_TEST_HELP
636 #endif
637
638 U_BOOT_CMD(
639 sf, 5, 1, do_spi_flash,
640 "SPI flash sub-system",
641 "probe [[bus:]cs] [hz] [mode] - init flash device on given SPI bus\n"
642 " and chip select\n"
643 "sf read addr offset|partition len - read `len' bytes starting at\n"
644 " `offset' or from start of mtd\n"
645 " `partition'to memory at `addr'\n"
646 "sf write addr offset|partition len - write `len' bytes from memory\n"
647 " at `addr' to flash at `offset'\n"
648 " or to start of mtd `partition'\n"
649 "sf erase offset|partition [+]len - erase `len' bytes from `offset'\n"
650 " or from start of mtd `partition'\n"
651 " `+len' round up `len' to block size\n"
652 "sf update addr offset|partition len - erase and write `len' bytes from memory\n"
653 " at `addr' to flash at `offset'\n"
654 " or to start of mtd `partition'\n"
655 "sf protect lock/unlock sector len - protect/unprotect 'len' bytes starting\n"
656 " at address 'sector'\n"
657 SF_TEST_HELP
658 );
659