1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (C) 2000-2005, DENX Software Engineering 4 * Wolfgang Denk <wd@denx.de> 5 * Copyright (C) Procsys. All rights reserved. 6 * Mushtaq Khan <mushtaq_k@procsys.com> 7 * <mushtaqk_921@yahoo.co.in> 8 * Copyright (C) 2008 Freescale Semiconductor, Inc. 9 * Dave Liu <daveliu@freescale.com> 10 */ 11 12 #include <common.h> 13 #include <ahci.h> 14 #include <dm.h> 15 #include <command.h> 16 #include <part.h> 17 #include <sata.h> 18 #include <dm/device-internal.h> 19 #include <dm/uclass-internal.h> 20 21 static int sata_curr_device = -1; 22 23 int sata_remove(int devnum) 24 { 25 #ifdef CONFIG_AHCI 26 struct udevice *dev; 27 int rc; 28 29 rc = uclass_find_device(UCLASS_AHCI, devnum, &dev); 30 if (!rc && !dev) 31 rc = uclass_find_first_device(UCLASS_AHCI, &dev); 32 if (rc || !dev) { 33 printf("Cannot find SATA device %d (err=%d)\n", devnum, rc); 34 return CMD_RET_FAILURE; 35 } 36 37 rc = device_remove(dev, DM_REMOVE_NORMAL); 38 if (rc) { 39 printf("Cannot remove SATA device '%s' (err=%d)\n", dev->name, 40 rc); 41 return CMD_RET_FAILURE; 42 } 43 44 return 0; 45 #else 46 return sata_stop(); 47 #endif 48 } 49 50 int sata_probe(int devnum) 51 { 52 #ifdef CONFIG_AHCI 53 struct udevice *dev; 54 int rc; 55 56 rc = uclass_get_device(UCLASS_AHCI, devnum, &dev); 57 if (rc) 58 rc = uclass_find_first_device(UCLASS_AHCI, &dev); 59 if (rc) { 60 printf("Cannot probe SATA device %d (err=%d)\n", devnum, rc); 61 return CMD_RET_FAILURE; 62 } 63 if (!dev) { 64 printf("No SATA device found!\n"); 65 return CMD_RET_FAILURE; 66 } 67 rc = sata_scan(dev); 68 if (rc) { 69 printf("Cannot scan SATA device %d (err=%d)\n", devnum, rc); 70 return CMD_RET_FAILURE; 71 } 72 73 return 0; 74 #else 75 return sata_initialize() < 0 ? CMD_RET_FAILURE : CMD_RET_SUCCESS; 76 #endif 77 } 78 79 static int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 80 { 81 int rc = 0; 82 83 if (argc >= 2) { 84 int devnum = 0; 85 86 if (argc == 3) 87 devnum = (int)simple_strtoul(argv[2], NULL, 10); 88 if (!strcmp(argv[1], "stop")) 89 return sata_remove(devnum); 90 91 if (!strcmp(argv[1], "init")) { 92 if (sata_curr_device != -1) { 93 rc = sata_remove(devnum); 94 if (rc) 95 return rc; 96 } 97 98 return sata_probe(devnum); 99 } 100 } 101 102 /* If the user has not yet run `sata init`, do it now */ 103 if (sata_curr_device == -1) { 104 rc = sata_probe(0); 105 if (rc) 106 return rc; 107 sata_curr_device = 0; 108 } 109 110 return blk_common_cmd(argc, argv, IF_TYPE_SATA, &sata_curr_device); 111 } 112 113 U_BOOT_CMD( 114 sata, 5, 1, do_sata, 115 "SATA sub system", 116 "init - init SATA sub system\n" 117 "sata stop [dev] - disable SATA sub system or device\n" 118 "sata info - show available SATA devices\n" 119 "sata device [dev] - show or set current device\n" 120 "sata part [dev] - print partition table\n" 121 "sata read addr blk# cnt\n" 122 "sata write addr blk# cnt" 123 ); 124