xref: /openbmc/u-boot/cmd/fastboot.c (revision b4cb8092)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright 2008 - 2009 Windriver, <www.windriver.com>
4  * Author: Tom Rix <Tom.Rix@windriver.com>
5  *
6  * (C) Copyright 2014 Linaro, Ltd.
7  * Rob Herring <robh@kernel.org>
8  */
9 #include <common.h>
10 #include <command.h>
11 #include <console.h>
12 #include <g_dnl.h>
13 #include <fastboot.h>
14 #include <net.h>
15 #include <usb.h>
16 
17 static int do_fastboot_udp(int argc, char *const argv[],
18 			   uintptr_t buf_addr, size_t buf_size)
19 {
20 #if CONFIG_IS_ENABLED(UDP_FUNCTION_FASTBOOT)
21 	int err = net_loop(FASTBOOT);
22 
23 	if (err < 0) {
24 		printf("fastboot udp error: %d\n", err);
25 		return CMD_RET_FAILURE;
26 	}
27 
28 	return CMD_RET_SUCCESS;
29 #else
30 	pr_err("Fastboot UDP not enabled\n");
31 	return CMD_RET_FAILURE;
32 #endif
33 }
34 
35 static int do_fastboot_usb(int argc, char *const argv[],
36 			   uintptr_t buf_addr, size_t buf_size)
37 {
38 #if CONFIG_IS_ENABLED(USB_FUNCTION_FASTBOOT)
39 	int controller_index;
40 	char *usb_controller;
41 	int ret;
42 
43 	if (argc < 2)
44 		return CMD_RET_USAGE;
45 
46 	usb_controller = argv[1];
47 	controller_index = simple_strtoul(usb_controller, NULL, 0);
48 
49 	ret = board_usb_init(controller_index, USB_INIT_DEVICE);
50 	if (ret) {
51 		pr_err("USB init failed: %d\n", ret);
52 		return CMD_RET_FAILURE;
53 	}
54 
55 	g_dnl_clear_detach();
56 	ret = g_dnl_register("usb_dnl_fastboot");
57 	if (ret)
58 		return ret;
59 
60 	if (!g_dnl_board_usb_cable_connected()) {
61 		puts("\rUSB cable not detected.\n" \
62 		     "Command exit.\n");
63 		ret = CMD_RET_FAILURE;
64 		goto exit;
65 	}
66 
67 	while (1) {
68 		if (g_dnl_detach())
69 			break;
70 		if (ctrlc())
71 			break;
72 		usb_gadget_handle_interrupts(controller_index);
73 	}
74 
75 	ret = CMD_RET_SUCCESS;
76 
77 exit:
78 	g_dnl_unregister();
79 	g_dnl_clear_detach();
80 	board_usb_cleanup(controller_index, USB_INIT_DEVICE);
81 
82 	return ret;
83 #else
84 	pr_err("Fastboot USB not enabled\n");
85 	return CMD_RET_FAILURE;
86 #endif
87 }
88 
89 static int do_fastboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
90 {
91 	uintptr_t buf_addr = (uintptr_t)NULL;
92 	size_t buf_size = 0;
93 
94 	if (argc < 2)
95 		return CMD_RET_USAGE;
96 
97 	while (argc > 1 && **(argv + 1) == '-') {
98 		char *arg = *++argv;
99 
100 		--argc;
101 		while (*++arg) {
102 			switch (*arg) {
103 			case 'l':
104 				if (--argc <= 0)
105 					return CMD_RET_USAGE;
106 				buf_addr = simple_strtoul(*++argv, NULL, 16);
107 				goto NXTARG;
108 
109 			case 's':
110 				if (--argc <= 0)
111 					return CMD_RET_USAGE;
112 				buf_size = simple_strtoul(*++argv, NULL, 16);
113 				goto NXTARG;
114 
115 			default:
116 				return CMD_RET_USAGE;
117 			}
118 		}
119 NXTARG:
120 		;
121 	}
122 
123 	fastboot_init((void *)buf_addr, buf_size);
124 
125 	if (!strcmp(argv[1], "udp"))
126 		return do_fastboot_udp(argc, argv, buf_addr, buf_size);
127 
128 	if (!strcmp(argv[1], "usb")) {
129 		argv++;
130 		argc--;
131 	}
132 
133 	return do_fastboot_usb(argc, argv, buf_addr, buf_size);
134 }
135 
136 #ifdef CONFIG_SYS_LONGHELP
137 static char fastboot_help_text[] =
138 	"[-l addr] [-s size] usb <controller> | udp\n"
139 	"\taddr - address of buffer used during data transfers ("
140 	__stringify(CONFIG_FASTBOOT_BUF_ADDR) ")\n"
141 	"\tsize - size of buffer used during data transfers ("
142 	__stringify(CONFIG_FASTBOOT_BUF_SIZE) ")"
143 	;
144 #endif
145 
146 U_BOOT_CMD(
147 	fastboot, CONFIG_SYS_MAXARGS, 1, do_fastboot,
148 	"run as a fastboot usb or udp device", fastboot_help_text
149 );
150