xref: /openbmc/u-boot/cmd/bootefi.c (revision 0f347a00)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  *  EFI application loader
4  *
5  *  Copyright (c) 2016 Alexander Graf
6  */
7 
8 #include <charset.h>
9 #include <common.h>
10 #include <command.h>
11 #include <dm.h>
12 #include <efi_loader.h>
13 #include <efi_selftest.h>
14 #include <errno.h>
15 #include <linux/libfdt.h>
16 #include <linux/libfdt_env.h>
17 #include <mapmem.h>
18 #include <memalign.h>
19 #include <asm/global_data.h>
20 #include <asm-generic/sections.h>
21 #include <asm-generic/unaligned.h>
22 #include <linux/linkage.h>
23 
24 #ifdef CONFIG_ARMV7_NONSEC
25 #include <asm/armv7.h>
26 #include <asm/secure.h>
27 #endif
28 
29 DECLARE_GLOBAL_DATA_PTR;
30 
31 #define OBJ_LIST_NOT_INITIALIZED 1
32 
33 static efi_status_t efi_obj_list_initialized = OBJ_LIST_NOT_INITIALIZED;
34 
35 static struct efi_device_path *bootefi_image_path;
36 static struct efi_device_path *bootefi_device_path;
37 
38 /* Initialize and populate EFI object list */
39 efi_status_t efi_init_obj_list(void)
40 {
41 	efi_status_t ret = EFI_SUCCESS;
42 
43 	/* Initialize once only */
44 	if (efi_obj_list_initialized != OBJ_LIST_NOT_INITIALIZED)
45 		return efi_obj_list_initialized;
46 
47 	/* Initialize system table */
48 	ret = efi_initialize_system_table();
49 	if (ret != EFI_SUCCESS)
50 		goto out;
51 
52 	/* Initialize root node */
53 	ret = efi_root_node_register();
54 	if (ret != EFI_SUCCESS)
55 		goto out;
56 
57 	/* Initialize EFI driver uclass */
58 	ret = efi_driver_init();
59 	if (ret != EFI_SUCCESS)
60 		goto out;
61 
62 	ret = efi_console_register();
63 	if (ret != EFI_SUCCESS)
64 		goto out;
65 #ifdef CONFIG_PARTITIONS
66 	ret = efi_disk_register();
67 	if (ret != EFI_SUCCESS)
68 		goto out;
69 #endif
70 #if defined(CONFIG_LCD) || defined(CONFIG_DM_VIDEO)
71 	ret = efi_gop_register();
72 	if (ret != EFI_SUCCESS)
73 		goto out;
74 #endif
75 #ifdef CONFIG_NET
76 	ret = efi_net_register();
77 	if (ret != EFI_SUCCESS)
78 		goto out;
79 #endif
80 #ifdef CONFIG_GENERATE_ACPI_TABLE
81 	ret = efi_acpi_register();
82 	if (ret != EFI_SUCCESS)
83 		goto out;
84 #endif
85 #ifdef CONFIG_GENERATE_SMBIOS_TABLE
86 	ret = efi_smbios_register();
87 	if (ret != EFI_SUCCESS)
88 		goto out;
89 #endif
90 	ret = efi_watchdog_register();
91 	if (ret != EFI_SUCCESS)
92 		goto out;
93 
94 	/* Initialize EFI runtime services */
95 	ret = efi_reset_system_init();
96 	if (ret != EFI_SUCCESS)
97 		goto out;
98 
99 out:
100 	efi_obj_list_initialized = ret;
101 	return ret;
102 }
103 
104 /*
105  * Allow unaligned memory access.
106  *
107  * This routine is overridden by architectures providing this feature.
108  */
109 void __weak allow_unaligned(void)
110 {
111 }
112 
113 /*
114  * Set the load options of an image from an environment variable.
115  *
116  * @loaded_image_info:	the image
117  * @env_var:		name of the environment variable
118  */
119 static void set_load_options(struct efi_loaded_image *loaded_image_info,
120 			     const char *env_var)
121 {
122 	size_t size;
123 	const char *env = env_get(env_var);
124 	u16 *pos;
125 
126 	loaded_image_info->load_options = NULL;
127 	loaded_image_info->load_options_size = 0;
128 	if (!env)
129 		return;
130 	size = utf8_utf16_strlen(env) + 1;
131 	loaded_image_info->load_options = calloc(size, sizeof(u16));
132 	if (!loaded_image_info->load_options) {
133 		printf("ERROR: Out of memory\n");
134 		return;
135 	}
136 	pos = loaded_image_info->load_options;
137 	utf8_utf16_strcpy(&pos, env);
138 	loaded_image_info->load_options_size = size * 2;
139 }
140 
141 /**
142  * copy_fdt() - Copy the device tree to a new location available to EFI
143  *
144  * The FDT is relocated into a suitable location within the EFI memory map.
145  * An additional 12KB is added to the space in case the device tree needs to be
146  * expanded later with fdt_open_into().
147  *
148  * @fdt_addr: On entry, address of start of FDT. On exit, address of relocated
149  *	FDT start
150  * @fdt_sizep: Returns new size of FDT, including
151  * @return new relocated address of FDT
152  */
153 static efi_status_t copy_fdt(ulong *fdt_addrp, ulong *fdt_sizep)
154 {
155 	unsigned long fdt_ram_start = -1L, fdt_pages;
156 	efi_status_t ret = 0;
157 	void *fdt, *new_fdt;
158 	u64 new_fdt_addr;
159 	uint fdt_size;
160 	int i;
161 
162 	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
163 		u64 ram_start = gd->bd->bi_dram[i].start;
164 		u64 ram_size = gd->bd->bi_dram[i].size;
165 
166 		if (!ram_size)
167 			continue;
168 
169 		if (ram_start < fdt_ram_start)
170 			fdt_ram_start = ram_start;
171 	}
172 
173 	/*
174 	 * Give us at least 4KB of breathing room in case the device tree needs
175 	 * to be expanded later. Round up to the nearest EFI page boundary.
176 	 */
177 	fdt = map_sysmem(*fdt_addrp, 0);
178 	fdt_size = fdt_totalsize(fdt);
179 	fdt_size += 4096 * 3;
180 	fdt_size = ALIGN(fdt_size + EFI_PAGE_SIZE - 1, EFI_PAGE_SIZE);
181 	fdt_pages = fdt_size >> EFI_PAGE_SHIFT;
182 
183 	/* Safe fdt location is at 127MB */
184 	new_fdt_addr = fdt_ram_start + (127 * 1024 * 1024) + fdt_size;
185 	ret = efi_allocate_pages(EFI_ALLOCATE_MAX_ADDRESS,
186 				 EFI_RUNTIME_SERVICES_DATA, fdt_pages,
187 				 &new_fdt_addr);
188 	if (ret != EFI_SUCCESS) {
189 		/* If we can't put it there, put it somewhere */
190 		new_fdt_addr = (ulong)memalign(EFI_PAGE_SIZE, fdt_size);
191 		ret = efi_allocate_pages(EFI_ALLOCATE_MAX_ADDRESS,
192 					 EFI_RUNTIME_SERVICES_DATA, fdt_pages,
193 					 &new_fdt_addr);
194 		if (ret != EFI_SUCCESS) {
195 			printf("ERROR: Failed to reserve space for FDT\n");
196 			goto done;
197 		}
198 	}
199 
200 	new_fdt = map_sysmem(new_fdt_addr, fdt_size);
201 	memcpy(new_fdt, fdt, fdt_totalsize(fdt));
202 	fdt_set_totalsize(new_fdt, fdt_size);
203 
204 	*fdt_addrp = new_fdt_addr;
205 	*fdt_sizep = fdt_size;
206 done:
207 	return ret;
208 }
209 
210 static efi_status_t efi_do_enter(
211 			efi_handle_t image_handle, struct efi_system_table *st,
212 			EFIAPI efi_status_t (*entry)(
213 				efi_handle_t image_handle,
214 				struct efi_system_table *st))
215 {
216 	efi_status_t ret = EFI_LOAD_ERROR;
217 
218 	if (entry)
219 		ret = entry(image_handle, st);
220 	st->boottime->exit(image_handle, ret, 0, NULL);
221 	return ret;
222 }
223 
224 #ifdef CONFIG_ARM64
225 static efi_status_t efi_run_in_el2(EFIAPI efi_status_t (*entry)(
226 			efi_handle_t image_handle, struct efi_system_table *st),
227 			efi_handle_t image_handle, struct efi_system_table *st)
228 {
229 	/* Enable caches again */
230 	dcache_enable();
231 
232 	return efi_do_enter(image_handle, st, entry);
233 }
234 #endif
235 
236 #ifdef CONFIG_ARMV7_NONSEC
237 static bool is_nonsec;
238 
239 static efi_status_t efi_run_in_hyp(EFIAPI efi_status_t (*entry)(
240 			efi_handle_t image_handle, struct efi_system_table *st),
241 			efi_handle_t image_handle, struct efi_system_table *st)
242 {
243 	/* Enable caches again */
244 	dcache_enable();
245 
246 	is_nonsec = true;
247 
248 	return efi_do_enter(image_handle, st, entry);
249 }
250 #endif
251 
252 /*
253  * efi_carve_out_dt_rsv() - Carve out DT reserved memory ranges
254  *
255  * The mem_rsv entries of the FDT are added to the memory map. Any failures are
256  * ignored because this is not critical and we would rather continue to try to
257  * boot.
258  *
259  * @fdt: Pointer to device tree
260  */
261 static void efi_carve_out_dt_rsv(void *fdt)
262 {
263 	int nr_rsv, i;
264 	uint64_t addr, size, pages;
265 
266 	nr_rsv = fdt_num_mem_rsv(fdt);
267 
268 	/* Look for an existing entry and add it to the efi mem map. */
269 	for (i = 0; i < nr_rsv; i++) {
270 		if (fdt_get_mem_rsv(fdt, i, &addr, &size) != 0)
271 			continue;
272 
273 		pages = ALIGN(size, EFI_PAGE_SIZE) >> EFI_PAGE_SHIFT;
274 		if (!efi_add_memory_map(addr, pages, EFI_RESERVED_MEMORY_TYPE,
275 					false))
276 			printf("FDT memrsv map %d: Failed to add to map\n", i);
277 	}
278 }
279 
280 static efi_status_t efi_install_fdt(ulong fdt_addr)
281 {
282 	bootm_headers_t img = { 0 };
283 	ulong fdt_pages, fdt_size, fdt_start;
284 	efi_status_t ret;
285 	void *fdt;
286 
287 	fdt = map_sysmem(fdt_addr, 0);
288 	if (fdt_check_header(fdt)) {
289 		printf("ERROR: invalid device tree\n");
290 		return EFI_INVALID_PARAMETER;
291 	}
292 
293 	/* Prepare fdt for payload */
294 	ret = copy_fdt(&fdt_addr, &fdt_size);
295 	if (ret)
296 		return ret;
297 
298 	unmap_sysmem(fdt);
299 	fdt = map_sysmem(fdt_addr, 0);
300 	fdt_size = fdt_totalsize(fdt);
301 	if (image_setup_libfdt(&img, fdt, 0, NULL)) {
302 		printf("ERROR: failed to process device tree\n");
303 		return EFI_LOAD_ERROR;
304 	}
305 
306 	efi_carve_out_dt_rsv(fdt);
307 
308 	/* Link to it in the efi tables */
309 	ret = efi_install_configuration_table(&efi_guid_fdt, fdt);
310 	if (ret != EFI_SUCCESS)
311 		return EFI_OUT_OF_RESOURCES;
312 
313 	/* And reserve the space in the memory map */
314 	fdt_start = fdt_addr;
315 	fdt_pages = fdt_size >> EFI_PAGE_SHIFT;
316 
317 	ret = efi_add_memory_map(fdt_start, fdt_pages,
318 				 EFI_BOOT_SERVICES_DATA, true);
319 
320 	return ret;
321 }
322 
323 /**
324  * do_bootefi_exec() - execute EFI binary
325  *
326  * @efi:		address of the binary
327  * @device_path:	path of the device from which the binary was loaded
328  * @image_path:		device path of the binary
329  * Return:		status code
330  *
331  * Load the EFI binary into a newly assigned memory unwinding the relocation
332  * information, install the loaded image protocol, and call the binary.
333  */
334 static efi_status_t do_bootefi_exec(void *efi,
335 				    struct efi_device_path *device_path,
336 				    struct efi_device_path *image_path)
337 {
338 	efi_handle_t mem_handle = NULL;
339 	struct efi_device_path *memdp = NULL;
340 	efi_status_t ret;
341 	struct efi_loaded_image_obj *image_handle = NULL;
342 	struct efi_loaded_image *loaded_image_info = NULL;
343 
344 	EFIAPI efi_status_t (*entry)(efi_handle_t image_handle,
345 				     struct efi_system_table *st);
346 
347 	/*
348 	 * Special case for efi payload not loaded from disk, such as
349 	 * 'bootefi hello' or for example payload loaded directly into
350 	 * memory via jtag, etc:
351 	 */
352 	if (!device_path && !image_path) {
353 		printf("WARNING: using memory device/image path, this may confuse some payloads!\n");
354 		/* actual addresses filled in after efi_load_pe() */
355 		memdp = efi_dp_from_mem(0, 0, 0);
356 		device_path = image_path = memdp;
357 		/*
358 		 * Grub expects that the device path of the loaded image is
359 		 * installed on a handle.
360 		 */
361 		ret = efi_create_handle(&mem_handle);
362 		if (ret != EFI_SUCCESS)
363 			goto exit;
364 		ret = efi_add_protocol(mem_handle, &efi_guid_device_path,
365 				       device_path);
366 		if (ret != EFI_SUCCESS)
367 			goto exit;
368 	} else {
369 		assert(device_path && image_path);
370 	}
371 
372 	ret = efi_setup_loaded_image(device_path, image_path, &image_handle,
373 				     &loaded_image_info);
374 	if (ret != EFI_SUCCESS)
375 		goto exit;
376 
377 	/*
378 	 * gd lives in a fixed register which may get clobbered while we execute
379 	 * the payload. So save it here and restore it on every callback entry
380 	 */
381 	efi_save_gd();
382 
383 	/* Transfer environment variable bootargs as load options */
384 	set_load_options(loaded_image_info, "bootargs");
385 	/* Load the EFI payload */
386 	entry = efi_load_pe(image_handle, efi, loaded_image_info);
387 	if (!entry) {
388 		ret = EFI_LOAD_ERROR;
389 		goto exit;
390 	}
391 
392 	if (memdp) {
393 		struct efi_device_path_memory *mdp = (void *)memdp;
394 		mdp->memory_type = loaded_image_info->image_code_type;
395 		mdp->start_address = (uintptr_t)loaded_image_info->image_base;
396 		mdp->end_address = mdp->start_address +
397 				loaded_image_info->image_size;
398 	}
399 
400 	/* we don't support much: */
401 	env_set("efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported",
402 		"{ro,boot}(blob)0000000000000000");
403 
404 	/* Call our payload! */
405 	debug("%s:%d Jumping to 0x%lx\n", __func__, __LINE__, (long)entry);
406 
407 	if (setjmp(&image_handle->exit_jmp)) {
408 		ret = image_handle->exit_status;
409 		goto exit;
410 	}
411 
412 #ifdef CONFIG_ARM64
413 	/* On AArch64 we need to make sure we call our payload in < EL3 */
414 	if (current_el() == 3) {
415 		smp_kick_all_cpus();
416 		dcache_disable();	/* flush cache before switch to EL2 */
417 
418 		/* Move into EL2 and keep running there */
419 		armv8_switch_to_el2((ulong)entry,
420 				    (ulong)image_handle,
421 				    (ulong)&systab, 0, (ulong)efi_run_in_el2,
422 				    ES_TO_AARCH64);
423 
424 		/* Should never reach here, efi exits with longjmp */
425 		while (1) { }
426 	}
427 #endif
428 
429 #ifdef CONFIG_ARMV7_NONSEC
430 	if (armv7_boot_nonsec() && !is_nonsec) {
431 		dcache_disable();	/* flush cache before switch to HYP */
432 
433 		armv7_init_nonsec();
434 		secure_ram_addr(_do_nonsec_entry)(
435 					efi_run_in_hyp,
436 					(uintptr_t)entry,
437 					(uintptr_t)image_handle,
438 					(uintptr_t)&systab);
439 
440 		/* Should never reach here, efi exits with longjmp */
441 		while (1) { }
442 	}
443 #endif
444 
445 	ret = efi_do_enter(image_handle, &systab, entry);
446 
447 exit:
448 	/* image has returned, loaded-image obj goes *poof*: */
449 	if (image_handle)
450 		efi_delete_handle(&image_handle->parent);
451 	if (mem_handle)
452 		efi_delete_handle(mem_handle);
453 
454 	return ret;
455 }
456 
457 static int do_bootefi_bootmgr_exec(void)
458 {
459 	struct efi_device_path *device_path, *file_path;
460 	void *addr;
461 	efi_status_t r;
462 
463 	/*
464 	 * gd lives in a fixed register which may get clobbered while we execute
465 	 * the payload. So save it here and restore it on every callback entry
466 	 */
467 	efi_save_gd();
468 
469 	addr = efi_bootmgr_load(&device_path, &file_path);
470 	if (!addr)
471 		return 1;
472 
473 	printf("## Starting EFI application at %p ...\n", addr);
474 	r = do_bootefi_exec(addr, device_path, file_path);
475 	printf("## Application terminated, r = %lu\n",
476 	       r & ~EFI_ERROR_MASK);
477 
478 	if (r != EFI_SUCCESS)
479 		return 1;
480 
481 	return 0;
482 }
483 
484 /* Interpreter command to boot an arbitrary EFI image from memory */
485 static int do_bootefi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
486 {
487 	unsigned long addr;
488 	char *saddr;
489 	efi_status_t r;
490 	unsigned long fdt_addr;
491 
492 	/* Allow unaligned memory access */
493 	allow_unaligned();
494 
495 	/* Initialize EFI drivers */
496 	r = efi_init_obj_list();
497 	if (r != EFI_SUCCESS) {
498 		printf("Error: Cannot set up EFI drivers, r = %lu\n",
499 		       r & ~EFI_ERROR_MASK);
500 		return CMD_RET_FAILURE;
501 	}
502 
503 	if (argc < 2)
504 		return CMD_RET_USAGE;
505 
506 	if (argc > 2) {
507 		fdt_addr = simple_strtoul(argv[2], NULL, 16);
508 		if (!fdt_addr && *argv[2] != '0')
509 			return CMD_RET_USAGE;
510 		/* Install device tree */
511 		r = efi_install_fdt(fdt_addr);
512 		if (r != EFI_SUCCESS) {
513 			printf("ERROR: failed to install device tree\n");
514 			return CMD_RET_FAILURE;
515 		}
516 	} else {
517 		/* Remove device tree. EFI_NOT_FOUND can be ignored here */
518 		efi_install_configuration_table(&efi_guid_fdt, NULL);
519 		printf("WARNING: booting without device tree\n");
520 	}
521 #ifdef CONFIG_CMD_BOOTEFI_HELLO
522 	if (!strcmp(argv[1], "hello")) {
523 		ulong size = __efi_helloworld_end - __efi_helloworld_begin;
524 
525 		saddr = env_get("loadaddr");
526 		if (saddr)
527 			addr = simple_strtoul(saddr, NULL, 16);
528 		else
529 			addr = CONFIG_SYS_LOAD_ADDR;
530 		memcpy(map_sysmem(addr, size), __efi_helloworld_begin, size);
531 	} else
532 #endif
533 #ifdef CONFIG_CMD_BOOTEFI_SELFTEST
534 	if (!strcmp(argv[1], "selftest")) {
535 		struct efi_loaded_image_obj *image_handle;
536 		struct efi_loaded_image *loaded_image_info;
537 
538 		/* Construct a dummy device path. */
539 		bootefi_device_path = efi_dp_from_mem(EFI_RESERVED_MEMORY_TYPE,
540 						      (uintptr_t)&efi_selftest,
541 						      (uintptr_t)&efi_selftest);
542 		bootefi_image_path = efi_dp_from_file(NULL, 0, "\\selftest");
543 
544 		r = efi_setup_loaded_image(bootefi_device_path,
545 					   bootefi_image_path, &image_handle,
546 					   &loaded_image_info);
547 		if (r != EFI_SUCCESS)
548 			return CMD_RET_FAILURE;
549 
550 		/*
551 		 * gd lives in a fixed register which may get clobbered while we
552 		 * execute the payload. So save it here and restore it on every
553 		 * callback entry
554 		 */
555 		efi_save_gd();
556 		/* Transfer environment variable efi_selftest as load options */
557 		set_load_options(loaded_image_info, "efi_selftest");
558 		/* Execute the test */
559 		r = efi_selftest(image_handle, &systab);
560 		efi_restore_gd();
561 		free(loaded_image_info->load_options);
562 		efi_delete_handle(&image_handle->parent);
563 		return r != EFI_SUCCESS;
564 	} else
565 #endif
566 	if (!strcmp(argv[1], "bootmgr")) {
567 		return do_bootefi_bootmgr_exec();
568 	} else {
569 		saddr = argv[1];
570 
571 		addr = simple_strtoul(saddr, NULL, 16);
572 		/* Check that a numeric value was passed */
573 		if (!addr && *saddr != '0')
574 			return CMD_RET_USAGE;
575 
576 	}
577 
578 	printf("## Starting EFI application at %08lx ...\n", addr);
579 	r = do_bootefi_exec(map_sysmem(addr, 0), bootefi_device_path,
580 			    bootefi_image_path);
581 	printf("## Application terminated, r = %lu\n",
582 	       r & ~EFI_ERROR_MASK);
583 
584 	if (r != EFI_SUCCESS)
585 		return 1;
586 	else
587 		return 0;
588 }
589 
590 #ifdef CONFIG_SYS_LONGHELP
591 static char bootefi_help_text[] =
592 	"<image address> [fdt address]\n"
593 	"  - boot EFI payload stored at address <image address>.\n"
594 	"    If specified, the device tree located at <fdt address> gets\n"
595 	"    exposed as EFI configuration table.\n"
596 #ifdef CONFIG_CMD_BOOTEFI_HELLO
597 	"bootefi hello\n"
598 	"  - boot a sample Hello World application stored within U-Boot\n"
599 #endif
600 #ifdef CONFIG_CMD_BOOTEFI_SELFTEST
601 	"bootefi selftest [fdt address]\n"
602 	"  - boot an EFI selftest application stored within U-Boot\n"
603 	"    Use environment variable efi_selftest to select a single test.\n"
604 	"    Use 'setenv efi_selftest list' to enumerate all tests.\n"
605 #endif
606 	"bootefi bootmgr [fdt addr]\n"
607 	"  - load and boot EFI payload based on BootOrder/BootXXXX variables.\n"
608 	"\n"
609 	"    If specified, the device tree located at <fdt address> gets\n"
610 	"    exposed as EFI configuration table.\n";
611 #endif
612 
613 U_BOOT_CMD(
614 	bootefi, 3, 0, do_bootefi,
615 	"Boots an EFI payload from memory",
616 	bootefi_help_text
617 );
618 
619 void efi_set_bootdev(const char *dev, const char *devnr, const char *path)
620 {
621 	char filename[32] = { 0 }; /* dp->str is u16[32] long */
622 	char *s;
623 
624 	/* efi_set_bootdev is typically called repeatedly, recover memory */
625 	efi_free_pool(bootefi_device_path);
626 	efi_free_pool(bootefi_image_path);
627 	/* If blk_get_device_part_str fails, avoid duplicate free. */
628 	bootefi_device_path = NULL;
629 	bootefi_image_path = NULL;
630 
631 	if (strcmp(dev, "Net")) {
632 		struct blk_desc *desc;
633 		disk_partition_t fs_partition;
634 		int part;
635 
636 		part = blk_get_device_part_str(dev, devnr, &desc, &fs_partition,
637 					       1);
638 		if (part < 0)
639 			return;
640 
641 		bootefi_device_path = efi_dp_from_part(desc, part);
642 	} else {
643 #ifdef CONFIG_NET
644 		bootefi_device_path = efi_dp_from_eth();
645 #endif
646 	}
647 
648 	if (!path)
649 		return;
650 
651 	if (strcmp(dev, "Net")) {
652 		/* Add leading / to fs paths, because they're absolute */
653 		snprintf(filename, sizeof(filename), "/%s", path);
654 	} else {
655 		snprintf(filename, sizeof(filename), "%s", path);
656 	}
657 	/* DOS style file path: */
658 	s = filename;
659 	while ((s = strchr(s, '/')))
660 		*s++ = '\\';
661 	bootefi_image_path = efi_dp_from_file(NULL, 0, filename);
662 }
663