1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * (C) Copyright 2003 4 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 5 */ 6 7 /* 8 * Boot support 9 */ 10 #include <common.h> 11 #include <command.h> 12 #include <linux/compiler.h> 13 14 DECLARE_GLOBAL_DATA_PTR; 15 16 __maybe_unused 17 static void print_num(const char *name, ulong value) 18 { 19 printf("%-12s= 0x%08lX\n", name, value); 20 } 21 22 __maybe_unused 23 static void print_eth(int idx) 24 { 25 char name[10], *val; 26 if (idx) 27 sprintf(name, "eth%iaddr", idx); 28 else 29 strcpy(name, "ethaddr"); 30 val = env_get(name); 31 if (!val) 32 val = "(not set)"; 33 printf("%-12s= %s\n", name, val); 34 } 35 36 #ifndef CONFIG_DM_ETH 37 __maybe_unused 38 static void print_eths(void) 39 { 40 struct eth_device *dev; 41 int i = 0; 42 43 do { 44 dev = eth_get_dev_by_index(i); 45 if (dev) { 46 printf("eth%dname = %s\n", i, dev->name); 47 print_eth(i); 48 i++; 49 } 50 } while (dev); 51 52 printf("current eth = %s\n", eth_get_name()); 53 printf("ip_addr = %s\n", env_get("ipaddr")); 54 } 55 #endif 56 57 __maybe_unused 58 static void print_lnum(const char *name, unsigned long long value) 59 { 60 printf("%-12s= 0x%.8llX\n", name, value); 61 } 62 63 __maybe_unused 64 static void print_mhz(const char *name, unsigned long hz) 65 { 66 char buf[32]; 67 68 printf("%-12s= %6s MHz\n", name, strmhz(buf, hz)); 69 } 70 71 72 static inline void print_bi_boot_params(const bd_t *bd) 73 { 74 print_num("boot_params", (ulong)bd->bi_boot_params); 75 } 76 77 static inline void print_bi_mem(const bd_t *bd) 78 { 79 #if defined(CONFIG_SH) 80 print_num("mem start ", (ulong)bd->bi_memstart); 81 print_lnum("mem size ", (u64)bd->bi_memsize); 82 #elif defined(CONFIG_ARC) 83 print_num("mem start", (ulong)bd->bi_memstart); 84 print_lnum("mem size", (u64)bd->bi_memsize); 85 #else 86 print_num("memstart", (ulong)bd->bi_memstart); 87 print_lnum("memsize", (u64)bd->bi_memsize); 88 #endif 89 } 90 91 static inline void print_bi_dram(const bd_t *bd) 92 { 93 #ifdef CONFIG_NR_DRAM_BANKS 94 int i; 95 96 for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) { 97 if (bd->bi_dram[i].size) { 98 print_num("DRAM bank", i); 99 print_num("-> start", bd->bi_dram[i].start); 100 print_num("-> size", bd->bi_dram[i].size); 101 } 102 } 103 #endif 104 } 105 106 static inline void print_bi_flash(const bd_t *bd) 107 { 108 #if defined(CONFIG_MICROBLAZE) || defined(CONFIG_SH) 109 print_num("flash start ", (ulong)bd->bi_flashstart); 110 print_num("flash size ", (ulong)bd->bi_flashsize); 111 print_num("flash offset ", (ulong)bd->bi_flashoffset); 112 113 #elif defined(CONFIG_NIOS2) 114 print_num("flash start", (ulong)bd->bi_flashstart); 115 print_num("flash size", (ulong)bd->bi_flashsize); 116 print_num("flash offset", (ulong)bd->bi_flashoffset); 117 #else 118 print_num("flashstart", (ulong)bd->bi_flashstart); 119 print_num("flashsize", (ulong)bd->bi_flashsize); 120 print_num("flashoffset", (ulong)bd->bi_flashoffset); 121 #endif 122 } 123 124 static inline void print_eth_ip_addr(void) 125 { 126 #if defined(CONFIG_CMD_NET) 127 print_eth(0); 128 #if defined(CONFIG_HAS_ETH1) 129 print_eth(1); 130 #endif 131 #if defined(CONFIG_HAS_ETH2) 132 print_eth(2); 133 #endif 134 #if defined(CONFIG_HAS_ETH3) 135 print_eth(3); 136 #endif 137 #if defined(CONFIG_HAS_ETH4) 138 print_eth(4); 139 #endif 140 #if defined(CONFIG_HAS_ETH5) 141 print_eth(5); 142 #endif 143 printf("IP addr = %s\n", env_get("ipaddr")); 144 #endif 145 } 146 147 static inline void print_baudrate(void) 148 { 149 #if defined(CONFIG_PPC) 150 printf("baudrate = %6u bps\n", gd->baudrate); 151 #else 152 printf("baudrate = %u bps\n", gd->baudrate); 153 #endif 154 } 155 156 static inline void __maybe_unused print_std_bdinfo(const bd_t *bd) 157 { 158 print_bi_boot_params(bd); 159 print_bi_mem(bd); 160 print_bi_flash(bd); 161 print_eth_ip_addr(); 162 print_baudrate(); 163 } 164 165 #if defined(CONFIG_PPC) 166 void __weak board_detail(void) 167 { 168 /* Please define board_detail() for your platform */ 169 } 170 171 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 172 { 173 bd_t *bd = gd->bd; 174 175 #ifdef DEBUG 176 print_num("bd address", (ulong)bd); 177 #endif 178 print_bi_mem(bd); 179 print_bi_flash(bd); 180 print_num("sramstart", bd->bi_sramstart); 181 print_num("sramsize", bd->bi_sramsize); 182 #if defined(CONFIG_MPC8xx) || defined(CONFIG_E500) 183 print_num("immr_base", bd->bi_immr_base); 184 #endif 185 print_num("bootflags", bd->bi_bootflags); 186 #if defined(CONFIG_CPM2) 187 print_mhz("vco", bd->bi_vco); 188 print_mhz("sccfreq", bd->bi_sccfreq); 189 print_mhz("brgfreq", bd->bi_brgfreq); 190 #endif 191 print_mhz("intfreq", bd->bi_intfreq); 192 #if defined(CONFIG_CPM2) 193 print_mhz("cpmfreq", bd->bi_cpmfreq); 194 #endif 195 print_mhz("busfreq", bd->bi_busfreq); 196 197 #ifdef CONFIG_ENABLE_36BIT_PHYS 198 #ifdef CONFIG_PHYS_64BIT 199 puts("addressing = 36-bit\n"); 200 #else 201 puts("addressing = 32-bit\n"); 202 #endif 203 #endif 204 205 print_eth_ip_addr(); 206 print_baudrate(); 207 print_num("relocaddr", gd->relocaddr); 208 board_detail(); 209 return 0; 210 } 211 212 #elif defined(CONFIG_NIOS2) 213 214 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 215 { 216 bd_t *bd = gd->bd; 217 218 print_bi_dram(bd); 219 print_bi_flash(bd); 220 221 #if defined(CONFIG_SYS_SRAM_BASE) 222 print_num ("sram start", (ulong)bd->bi_sramstart); 223 print_num ("sram size", (ulong)bd->bi_sramsize); 224 #endif 225 226 print_eth_ip_addr(); 227 print_baudrate(); 228 229 return 0; 230 } 231 232 #elif defined(CONFIG_MICROBLAZE) 233 234 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 235 { 236 bd_t *bd = gd->bd; 237 238 print_bi_dram(bd); 239 print_bi_flash(bd); 240 #if defined(CONFIG_SYS_SRAM_BASE) 241 print_num("sram start ", (ulong)bd->bi_sramstart); 242 print_num("sram size ", (ulong)bd->bi_sramsize); 243 #endif 244 #if defined(CONFIG_CMD_NET) && !defined(CONFIG_DM_ETH) 245 print_eths(); 246 #endif 247 print_baudrate(); 248 print_num("relocaddr", gd->relocaddr); 249 print_num("reloc off", gd->reloc_off); 250 print_num("fdt_blob", (ulong)gd->fdt_blob); 251 print_num("new_fdt", (ulong)gd->new_fdt); 252 print_num("fdt_size", (ulong)gd->fdt_size); 253 254 return 0; 255 } 256 257 #elif defined(CONFIG_M68K) 258 259 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 260 { 261 bd_t *bd = gd->bd; 262 263 print_bi_mem(bd); 264 print_bi_flash(bd); 265 #if defined(CONFIG_SYS_INIT_RAM_ADDR) 266 print_num("sramstart", (ulong)bd->bi_sramstart); 267 print_num("sramsize", (ulong)bd->bi_sramsize); 268 #endif 269 #if defined(CONFIG_SYS_MBAR) 270 print_num("mbar", bd->bi_mbar_base); 271 #endif 272 print_mhz("cpufreq", bd->bi_intfreq); 273 print_mhz("busfreq", bd->bi_busfreq); 274 #ifdef CONFIG_PCI 275 print_mhz("pcifreq", bd->bi_pcifreq); 276 #endif 277 #ifdef CONFIG_EXTRA_CLOCK 278 print_mhz("flbfreq", bd->bi_flbfreq); 279 print_mhz("inpfreq", bd->bi_inpfreq); 280 print_mhz("vcofreq", bd->bi_vcofreq); 281 #endif 282 print_eth_ip_addr(); 283 print_baudrate(); 284 285 return 0; 286 } 287 288 #elif defined(CONFIG_MIPS) 289 290 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 291 { 292 print_std_bdinfo(gd->bd); 293 print_num("relocaddr", gd->relocaddr); 294 print_num("reloc off", gd->reloc_off); 295 296 return 0; 297 } 298 299 #elif defined(CONFIG_ARM) 300 301 static int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, 302 char * const argv[]) 303 { 304 bd_t *bd = gd->bd; 305 306 print_num("arch_number", bd->bi_arch_number); 307 print_bi_boot_params(bd); 308 print_bi_dram(bd); 309 310 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE 311 if (gd->arch.secure_ram & MEM_RESERVE_SECURE_SECURED) { 312 print_num("Secure ram", 313 gd->arch.secure_ram & MEM_RESERVE_SECURE_ADDR_MASK); 314 } 315 #endif 316 #ifdef CONFIG_RESV_RAM 317 if (gd->arch.resv_ram) 318 print_num("Reserved ram", gd->arch.resv_ram); 319 #endif 320 #if defined(CONFIG_CMD_NET) && !defined(CONFIG_DM_ETH) 321 print_eths(); 322 #endif 323 print_baudrate(); 324 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) 325 print_num("TLB addr", gd->arch.tlb_addr); 326 #endif 327 print_num("relocaddr", gd->relocaddr); 328 print_num("reloc off", gd->reloc_off); 329 print_num("irq_sp", gd->irq_sp); /* irq stack pointer */ 330 print_num("sp start ", gd->start_addr_sp); 331 #if defined(CONFIG_LCD) || defined(CONFIG_VIDEO) 332 print_num("FB base ", gd->fb_base); 333 #endif 334 /* 335 * TODO: Currently only support for davinci SOC's is added. 336 * Remove this check once all the board implement this. 337 */ 338 #ifdef CONFIG_CLOCKS 339 printf("ARM frequency = %ld MHz\n", gd->bd->bi_arm_freq); 340 printf("DSP frequency = %ld MHz\n", gd->bd->bi_dsp_freq); 341 printf("DDR frequency = %ld MHz\n", gd->bd->bi_ddr_freq); 342 #endif 343 #ifdef CONFIG_BOARD_TYPES 344 printf("Board Type = %ld\n", gd->board_type); 345 #endif 346 #if CONFIG_VAL(SYS_MALLOC_F_LEN) 347 printf("Early malloc usage: %lx / %x\n", gd->malloc_ptr, 348 CONFIG_VAL(SYS_MALLOC_F_LEN)); 349 #endif 350 if (gd->fdt_blob) 351 printf("fdt_blob = %p\n", gd->fdt_blob); 352 353 return 0; 354 } 355 356 #elif defined(CONFIG_SH) 357 358 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 359 { 360 bd_t *bd = gd->bd; 361 362 print_bi_mem(bd); 363 print_bi_flash(bd); 364 print_eth_ip_addr(); 365 print_baudrate(); 366 return 0; 367 } 368 369 #elif defined(CONFIG_X86) 370 371 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 372 { 373 bd_t *bd = gd->bd; 374 375 print_bi_boot_params(bd); 376 377 print_bi_dram(bd); 378 379 print_num("relocaddr", gd->relocaddr); 380 print_num("reloc off", gd->reloc_off); 381 #if defined(CONFIG_CMD_NET) 382 print_eth_ip_addr(); 383 print_mhz("ethspeed", bd->bi_ethspeed); 384 #endif 385 print_baudrate(); 386 387 return 0; 388 } 389 390 #elif defined(CONFIG_SANDBOX) 391 392 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 393 { 394 bd_t *bd = gd->bd; 395 396 print_bi_boot_params(bd); 397 print_bi_dram(bd); 398 print_eth_ip_addr(); 399 400 #if defined(CONFIG_LCD) || defined(CONFIG_VIDEO) 401 print_num("FB base ", gd->fb_base); 402 #endif 403 return 0; 404 } 405 406 #elif defined(CONFIG_NDS32) 407 408 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 409 { 410 bd_t *bd = gd->bd; 411 412 print_num("arch_number", bd->bi_arch_number); 413 print_bi_boot_params(bd); 414 print_bi_dram(bd); 415 print_eth_ip_addr(); 416 print_baudrate(); 417 418 return 0; 419 } 420 421 #elif defined(CONFIG_RISCV) 422 423 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 424 { 425 bd_t *bd = gd->bd; 426 427 print_num("arch_number", bd->bi_arch_number); 428 print_bi_boot_params(bd); 429 print_bi_dram(bd); 430 print_eth_ip_addr(); 431 print_baudrate(); 432 433 return 0; 434 } 435 436 #elif defined(CONFIG_ARC) 437 438 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 439 { 440 bd_t *bd = gd->bd; 441 442 print_bi_mem(bd); 443 print_eth_ip_addr(); 444 print_baudrate(); 445 446 return 0; 447 } 448 449 #elif defined(CONFIG_XTENSA) 450 451 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 452 { 453 print_std_bdinfo(gd->bd); 454 return 0; 455 } 456 457 #else 458 #error "a case for this architecture does not exist!" 459 #endif 460 461 /* -------------------------------------------------------------------- */ 462 463 U_BOOT_CMD( 464 bdinfo, 1, 1, do_bdinfo, 465 "print Board Info structure", 466 "" 467 ); 468