xref: /openbmc/u-boot/board/xilinx/zynqmp/zynqmp.c (revision 09d84117)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2014 - 2015 Xilinx, Inc.
4  * Michal Simek <michal.simek@xilinx.com>
5  */
6 
7 #include <common.h>
8 #include <sata.h>
9 #include <ahci.h>
10 #include <scsi.h>
11 #include <malloc.h>
12 #include <wdt.h>
13 #include <asm/arch/clk.h>
14 #include <asm/arch/hardware.h>
15 #include <asm/arch/sys_proto.h>
16 #include <asm/arch/psu_init_gpl.h>
17 #include <asm/io.h>
18 #include <dm/device.h>
19 #include <dm/uclass.h>
20 #include <usb.h>
21 #include <dwc3-uboot.h>
22 #include <zynqmppl.h>
23 #include <i2c.h>
24 #include <g_dnl.h>
25 
26 DECLARE_GLOBAL_DATA_PTR;
27 
28 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT)
29 static struct udevice *watchdog_dev;
30 #endif
31 
32 #if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
33     !defined(CONFIG_SPL_BUILD)
34 static xilinx_desc zynqmppl = XILINX_ZYNQMP_DESC;
35 
36 static const struct {
37 	u32 id;
38 	u32 ver;
39 	char *name;
40 	bool evexists;
41 } zynqmp_devices[] = {
42 	{
43 		.id = 0x10,
44 		.name = "3eg",
45 	},
46 	{
47 		.id = 0x10,
48 		.ver = 0x2c,
49 		.name = "3cg",
50 	},
51 	{
52 		.id = 0x11,
53 		.name = "2eg",
54 	},
55 	{
56 		.id = 0x11,
57 		.ver = 0x2c,
58 		.name = "2cg",
59 	},
60 	{
61 		.id = 0x20,
62 		.name = "5ev",
63 		.evexists = 1,
64 	},
65 	{
66 		.id = 0x20,
67 		.ver = 0x100,
68 		.name = "5eg",
69 		.evexists = 1,
70 	},
71 	{
72 		.id = 0x20,
73 		.ver = 0x12c,
74 		.name = "5cg",
75 	},
76 	{
77 		.id = 0x21,
78 		.name = "4ev",
79 		.evexists = 1,
80 	},
81 	{
82 		.id = 0x21,
83 		.ver = 0x100,
84 		.name = "4eg",
85 		.evexists = 1,
86 	},
87 	{
88 		.id = 0x21,
89 		.ver = 0x12c,
90 		.name = "4cg",
91 	},
92 	{
93 		.id = 0x30,
94 		.name = "7ev",
95 		.evexists = 1,
96 	},
97 	{
98 		.id = 0x30,
99 		.ver = 0x100,
100 		.name = "7eg",
101 		.evexists = 1,
102 	},
103 	{
104 		.id = 0x30,
105 		.ver = 0x12c,
106 		.name = "7cg",
107 	},
108 	{
109 		.id = 0x38,
110 		.name = "9eg",
111 	},
112 	{
113 		.id = 0x38,
114 		.ver = 0x2c,
115 		.name = "9cg",
116 	},
117 	{
118 		.id = 0x39,
119 		.name = "6eg",
120 	},
121 	{
122 		.id = 0x39,
123 		.ver = 0x2c,
124 		.name = "6cg",
125 	},
126 	{
127 		.id = 0x40,
128 		.name = "11eg",
129 	},
130 	{ /* For testing purpose only */
131 		.id = 0x50,
132 		.ver = 0x2c,
133 		.name = "15cg",
134 	},
135 	{
136 		.id = 0x50,
137 		.name = "15eg",
138 	},
139 	{
140 		.id = 0x58,
141 		.name = "19eg",
142 	},
143 	{
144 		.id = 0x59,
145 		.name = "17eg",
146 	},
147 	{
148 		.id = 0x61,
149 		.name = "21dr",
150 	},
151 	{
152 		.id = 0x63,
153 		.name = "23dr",
154 	},
155 	{
156 		.id = 0x65,
157 		.name = "25dr",
158 	},
159 	{
160 		.id = 0x64,
161 		.name = "27dr",
162 	},
163 	{
164 		.id = 0x60,
165 		.name = "28dr",
166 	},
167 	{
168 		.id = 0x62,
169 		.name = "29dr",
170 	},
171 };
172 #endif
173 
174 int chip_id(unsigned char id)
175 {
176 	struct pt_regs regs;
177 	int val = -EINVAL;
178 
179 	if (current_el() != 3) {
180 		regs.regs[0] = ZYNQMP_SIP_SVC_CSU_DMA_CHIPID;
181 		regs.regs[1] = 0;
182 		regs.regs[2] = 0;
183 		regs.regs[3] = 0;
184 
185 		smc_call(&regs);
186 
187 		/*
188 		 * SMC returns:
189 		 * regs[0][31:0]  = status of the operation
190 		 * regs[0][63:32] = CSU.IDCODE register
191 		 * regs[1][31:0]  = CSU.version register
192 		 * regs[1][63:32] = CSU.IDCODE2 register
193 		 */
194 		switch (id) {
195 		case IDCODE:
196 			regs.regs[0] = upper_32_bits(regs.regs[0]);
197 			regs.regs[0] &= ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK |
198 					ZYNQMP_CSU_IDCODE_SVD_MASK;
199 			regs.regs[0] >>= ZYNQMP_CSU_IDCODE_SVD_SHIFT;
200 			val = regs.regs[0];
201 			break;
202 		case VERSION:
203 			regs.regs[1] = lower_32_bits(regs.regs[1]);
204 			regs.regs[1] &= ZYNQMP_CSU_SILICON_VER_MASK;
205 			val = regs.regs[1];
206 			break;
207 		case IDCODE2:
208 			regs.regs[1] = lower_32_bits(regs.regs[1]);
209 			regs.regs[1] >>= ZYNQMP_CSU_VERSION_EMPTY_SHIFT;
210 			val = regs.regs[1];
211 			break;
212 		default:
213 			printf("%s, Invalid Req:0x%x\n", __func__, id);
214 		}
215 	} else {
216 		switch (id) {
217 		case IDCODE:
218 			val = readl(ZYNQMP_CSU_IDCODE_ADDR);
219 			val &= ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK |
220 			       ZYNQMP_CSU_IDCODE_SVD_MASK;
221 			val >>= ZYNQMP_CSU_IDCODE_SVD_SHIFT;
222 			break;
223 		case VERSION:
224 			val = readl(ZYNQMP_CSU_VER_ADDR);
225 			val &= ZYNQMP_CSU_SILICON_VER_MASK;
226 			break;
227 		default:
228 			printf("%s, Invalid Req:0x%x\n", __func__, id);
229 		}
230 	}
231 
232 	return val;
233 }
234 
235 #define ZYNQMP_VERSION_SIZE		9
236 #define ZYNQMP_PL_STATUS_BIT		9
237 #define ZYNQMP_PL_STATUS_MASK		BIT(ZYNQMP_PL_STATUS_BIT)
238 #define ZYNQMP_CSU_VERSION_MASK		~(ZYNQMP_PL_STATUS_MASK)
239 
240 #if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
241 	!defined(CONFIG_SPL_BUILD)
242 static char *zynqmp_get_silicon_idcode_name(void)
243 {
244 	u32 i, id, ver;
245 	char *buf;
246 	static char name[ZYNQMP_VERSION_SIZE];
247 
248 	id = chip_id(IDCODE);
249 	ver = chip_id(IDCODE2);
250 
251 	for (i = 0; i < ARRAY_SIZE(zynqmp_devices); i++) {
252 		if ((zynqmp_devices[i].id == id) &&
253 		    (zynqmp_devices[i].ver == (ver &
254 		    ZYNQMP_CSU_VERSION_MASK))) {
255 			strncat(name, "zu", 2);
256 			strncat(name, zynqmp_devices[i].name,
257 				ZYNQMP_VERSION_SIZE - 3);
258 			break;
259 		}
260 	}
261 
262 	if (i >= ARRAY_SIZE(zynqmp_devices))
263 		return "unknown";
264 
265 	if (!zynqmp_devices[i].evexists)
266 		return name;
267 
268 	if (ver & ZYNQMP_PL_STATUS_MASK)
269 		return name;
270 
271 	if (strstr(name, "eg") || strstr(name, "ev")) {
272 		buf = strstr(name, "e");
273 		*buf = '\0';
274 	}
275 
276 	return name;
277 }
278 #endif
279 
280 int board_early_init_f(void)
281 {
282 	int ret = 0;
283 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_CLK_ZYNQMP)
284 	zynqmp_pmufw_version();
285 #endif
286 
287 #if defined(CONFIG_ZYNQMP_PSU_INIT_ENABLED)
288 	ret = psu_init();
289 #endif
290 
291 #if defined(CONFIG_WDT) && !defined(CONFIG_SPL_BUILD)
292 	/* bss is not cleared at time when watchdog_reset() is called */
293 	watchdog_dev = NULL;
294 #endif
295 
296 	return ret;
297 }
298 
299 int board_init(void)
300 {
301 	printf("EL Level:\tEL%d\n", current_el());
302 
303 #if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
304     !defined(CONFIG_SPL_BUILD) || (defined(CONFIG_SPL_FPGA_SUPPORT) && \
305     defined(CONFIG_SPL_BUILD))
306 	if (current_el() != 3) {
307 		zynqmppl.name = zynqmp_get_silicon_idcode_name();
308 		printf("Chip ID:\t%s\n", zynqmppl.name);
309 		fpga_init();
310 		fpga_add(fpga_xilinx, &zynqmppl);
311 	}
312 #endif
313 
314 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT)
315 	if (uclass_get_device_by_seq(UCLASS_WDT, 0, &watchdog_dev)) {
316 		debug("Watchdog: Not found by seq!\n");
317 		if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
318 			puts("Watchdog: Not found!\n");
319 			return 0;
320 		}
321 	}
322 
323 	wdt_start(watchdog_dev, 0, 0);
324 	puts("Watchdog: Started\n");
325 #endif
326 
327 	return 0;
328 }
329 
330 #ifdef CONFIG_WATCHDOG
331 /* Called by macro WATCHDOG_RESET */
332 void watchdog_reset(void)
333 {
334 # if !defined(CONFIG_SPL_BUILD)
335 	static ulong next_reset;
336 	ulong now;
337 
338 	if (!watchdog_dev)
339 		return;
340 
341 	now = timer_get_us();
342 
343 	/* Do not reset the watchdog too often */
344 	if (now > next_reset) {
345 		wdt_reset(watchdog_dev);
346 		next_reset = now + 1000;
347 	}
348 # endif
349 }
350 #endif
351 
352 int board_early_init_r(void)
353 {
354 	u32 val;
355 
356 	if (current_el() != 3)
357 		return 0;
358 
359 	val = readl(&crlapb_base->timestamp_ref_ctrl);
360 	val &= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT;
361 
362 	if (!val) {
363 		val = readl(&crlapb_base->timestamp_ref_ctrl);
364 		val |= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT;
365 		writel(val, &crlapb_base->timestamp_ref_ctrl);
366 
367 		/* Program freq register in System counter */
368 		writel(zynqmp_get_system_timer_freq(),
369 		       &iou_scntr_secure->base_frequency_id_register);
370 		/* And enable system counter */
371 		writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN,
372 		       &iou_scntr_secure->counter_control_register);
373 	}
374 	return 0;
375 }
376 
377 int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
378 {
379 #if defined(CONFIG_ZYNQ_GEM_EEPROM_ADDR) && \
380     defined(CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET) && \
381     defined(CONFIG_ZYNQ_EEPROM_BUS)
382 	i2c_set_bus_num(CONFIG_ZYNQ_EEPROM_BUS);
383 
384 	if (eeprom_read(CONFIG_ZYNQ_GEM_EEPROM_ADDR,
385 			CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET,
386 			ethaddr, 6))
387 		printf("I2C EEPROM MAC address read failed\n");
388 #endif
389 
390 	return 0;
391 }
392 
393 unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc,
394 			 char * const argv[])
395 {
396 	int ret = 0;
397 
398 	if (current_el() > 1) {
399 		smp_kick_all_cpus();
400 		dcache_disable();
401 		armv8_switch_to_el1(0x0, 0, 0, 0, (unsigned long)entry,
402 				    ES_TO_AARCH64);
403 	} else {
404 		printf("FAIL: current EL is not above EL1\n");
405 		ret = EINVAL;
406 	}
407 	return ret;
408 }
409 
410 #if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
411 int dram_init_banksize(void)
412 {
413 	int ret;
414 
415 	ret = fdtdec_setup_memory_banksize();
416 	if (ret)
417 		return ret;
418 
419 	mem_map_fill();
420 
421 	return 0;
422 }
423 
424 int dram_init(void)
425 {
426 	if (fdtdec_setup_mem_size_base() != 0)
427 		return -EINVAL;
428 
429 	return 0;
430 }
431 #else
432 int dram_init_banksize(void)
433 {
434 #if defined(CONFIG_NR_DRAM_BANKS)
435 	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
436 	gd->bd->bi_dram[0].size = get_effective_memsize();
437 #endif
438 
439 	mem_map_fill();
440 
441 	return 0;
442 }
443 
444 int dram_init(void)
445 {
446 	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
447 				    CONFIG_SYS_SDRAM_SIZE);
448 
449 	return 0;
450 }
451 #endif
452 
453 void reset_cpu(ulong addr)
454 {
455 }
456 
457 static const struct {
458 	u32 bit;
459 	const char *name;
460 } reset_reasons[] = {
461 	{ RESET_REASON_DEBUG_SYS, "DEBUG" },
462 	{ RESET_REASON_SOFT, "SOFT" },
463 	{ RESET_REASON_SRST, "SRST" },
464 	{ RESET_REASON_PSONLY, "PS-ONLY" },
465 	{ RESET_REASON_PMU, "PMU" },
466 	{ RESET_REASON_INTERNAL, "INTERNAL" },
467 	{ RESET_REASON_EXTERNAL, "EXTERNAL" },
468 	{}
469 };
470 
471 static u32 reset_reason(void)
472 {
473 	u32 ret;
474 	int i;
475 	const char *reason = NULL;
476 
477 	ret = readl(&crlapb_base->reset_reason);
478 
479 	puts("Reset reason:\t");
480 
481 	for (i = 0; i < ARRAY_SIZE(reset_reasons); i++) {
482 		if (ret & reset_reasons[i].bit) {
483 			reason = reset_reasons[i].name;
484 			printf("%s ", reset_reasons[i].name);
485 			break;
486 		}
487 	}
488 
489 	puts("\n");
490 
491 	env_set("reset_reason", reason);
492 
493 	writel(~0, &crlapb_base->reset_reason);
494 
495 	return ret;
496 }
497 
498 int board_late_init(void)
499 {
500 	u32 reg = 0;
501 	u8 bootmode;
502 	struct udevice *dev;
503 	int bootseq = -1;
504 	int bootseq_len = 0;
505 	int env_targets_len = 0;
506 	const char *mode;
507 	char *new_targets;
508 	char *env_targets;
509 	int ret;
510 
511 	if (!(gd->flags & GD_FLG_ENV_DEFAULT)) {
512 		debug("Saved variables - Skipping\n");
513 		return 0;
514 	}
515 
516 	ret = zynqmp_mmio_read((ulong)&crlapb_base->boot_mode, &reg);
517 	if (ret)
518 		return -EINVAL;
519 
520 	if (reg >> BOOT_MODE_ALT_SHIFT)
521 		reg >>= BOOT_MODE_ALT_SHIFT;
522 
523 	bootmode = reg & BOOT_MODES_MASK;
524 
525 	puts("Bootmode: ");
526 	switch (bootmode) {
527 	case USB_MODE:
528 		puts("USB_MODE\n");
529 		mode = "usb";
530 		env_set("modeboot", "usb_dfu_spl");
531 		break;
532 	case JTAG_MODE:
533 		puts("JTAG_MODE\n");
534 		mode = "pxe dhcp";
535 		env_set("modeboot", "jtagboot");
536 		break;
537 	case QSPI_MODE_24BIT:
538 	case QSPI_MODE_32BIT:
539 		mode = "qspi0";
540 		puts("QSPI_MODE\n");
541 		env_set("modeboot", "qspiboot");
542 		break;
543 	case EMMC_MODE:
544 		puts("EMMC_MODE\n");
545 		mode = "mmc0";
546 		env_set("modeboot", "emmcboot");
547 		break;
548 	case SD_MODE:
549 		puts("SD_MODE\n");
550 		if (uclass_get_device_by_name(UCLASS_MMC,
551 					      "sdhci@ff160000", &dev)) {
552 			puts("Boot from SD0 but without SD0 enabled!\n");
553 			return -1;
554 		}
555 		debug("mmc0 device found at %p, seq %d\n", dev, dev->seq);
556 
557 		mode = "mmc";
558 		bootseq = dev->seq;
559 		env_set("modeboot", "sdboot");
560 		break;
561 	case SD1_LSHFT_MODE:
562 		puts("LVL_SHFT_");
563 		/* fall through */
564 	case SD_MODE1:
565 		puts("SD_MODE1\n");
566 		if (uclass_get_device_by_name(UCLASS_MMC,
567 					      "sdhci@ff170000", &dev)) {
568 			puts("Boot from SD1 but without SD1 enabled!\n");
569 			return -1;
570 		}
571 		debug("mmc1 device found at %p, seq %d\n", dev, dev->seq);
572 
573 		mode = "mmc";
574 		bootseq = dev->seq;
575 		env_set("modeboot", "sdboot");
576 		break;
577 	case NAND_MODE:
578 		puts("NAND_MODE\n");
579 		mode = "nand0";
580 		env_set("modeboot", "nandboot");
581 		break;
582 	default:
583 		mode = "";
584 		printf("Invalid Boot Mode:0x%x\n", bootmode);
585 		break;
586 	}
587 
588 	if (bootseq >= 0) {
589 		bootseq_len = snprintf(NULL, 0, "%i", bootseq);
590 		debug("Bootseq len: %x\n", bootseq_len);
591 	}
592 
593 	/*
594 	 * One terminating char + one byte for space between mode
595 	 * and default boot_targets
596 	 */
597 	env_targets = env_get("boot_targets");
598 	if (env_targets)
599 		env_targets_len = strlen(env_targets);
600 
601 	new_targets = calloc(1, strlen(mode) + env_targets_len + 2 +
602 			     bootseq_len);
603 	if (!new_targets)
604 		return -ENOMEM;
605 
606 	if (bootseq >= 0)
607 		sprintf(new_targets, "%s%x %s", mode, bootseq,
608 			env_targets ? env_targets : "");
609 	else
610 		sprintf(new_targets, "%s %s", mode,
611 			env_targets ? env_targets : "");
612 
613 	env_set("boot_targets", new_targets);
614 
615 	reset_reason();
616 
617 	return 0;
618 }
619 
620 int checkboard(void)
621 {
622 	puts("Board: Xilinx ZynqMP\n");
623 	return 0;
624 }
625