xref: /openbmc/u-boot/board/xilinx/zynqmp/cmds.c (revision dbb0696b)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * (C) Copyright 2018 Xilinx, Inc.
4  * Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
5  */
6 
7 #include <common.h>
8 #include <malloc.h>
9 #include <asm/arch/hardware.h>
10 #include <asm/arch/sys_proto.h>
11 #include <asm/io.h>
12 
13 static int do_zynqmp_verify_secure(cmd_tbl_t *cmdtp, int flag, int argc,
14 				   char * const argv[])
15 {
16 	u64 src_addr, addr;
17 	u32 len, src_lo, src_hi;
18 	u8 *key_ptr = NULL;
19 	int ret;
20 	u32 key_lo = 0;
21 	u32 key_hi = 0;
22 	u32 ret_payload[PAYLOAD_ARG_CNT];
23 
24 	if (argc < 4)
25 		return CMD_RET_USAGE;
26 
27 	src_addr = simple_strtoull(argv[2], NULL, 16);
28 	len = simple_strtoul(argv[3], NULL, 16);
29 
30 	if (argc == 5)
31 		key_ptr = (uint8_t *)(uintptr_t)simple_strtoull(argv[4],
32 								NULL, 16);
33 
34 	if ((ulong)src_addr != ALIGN((ulong)src_addr,
35 				     CONFIG_SYS_CACHELINE_SIZE)) {
36 		printf("Failed: source address not aligned:%lx\n",
37 		       (ulong)src_addr);
38 		return -EINVAL;
39 	}
40 
41 	src_lo = lower_32_bits((ulong)src_addr);
42 	src_hi = upper_32_bits((ulong)src_addr);
43 	flush_dcache_range((ulong)src_addr, (ulong)(src_addr + len));
44 
45 	if (key_ptr) {
46 		key_lo = lower_32_bits((ulong)key_ptr);
47 		key_hi = upper_32_bits((ulong)key_ptr);
48 		flush_dcache_range((ulong)key_ptr,
49 				   (ulong)(key_ptr + KEY_PTR_LEN));
50 	}
51 
52 	ret = invoke_smc(ZYNQMP_SIP_SVC_PM_SECURE_IMG_LOAD, src_lo, src_hi,
53 			 key_lo, key_hi, ret_payload);
54 	if (ret) {
55 		printf("Failed: secure op status:0x%x\n", ret);
56 	} else {
57 		addr = (u64)ret_payload[1] << 32 | ret_payload[2];
58 		printf("Verified image at 0x%llx\n", addr);
59 		env_set_hex("zynqmp_verified_img_addr", addr);
60 	}
61 
62 	return ret;
63 }
64 
65 static int do_zynqmp_mmio_read(cmd_tbl_t *cmdtp, int flag, int argc,
66 			       char * const argv[])
67 {
68 	u32 read_val, addr;
69 	int ret;
70 
71 	if (argc != cmdtp->maxargs)
72 		return CMD_RET_USAGE;
73 
74 	addr = simple_strtoul(argv[2], NULL, 16);
75 
76 	ret = zynqmp_mmio_read(addr, &read_val);
77 	if (!ret)
78 		printf("mmio read value at 0x%x = 0x%x\n",
79 		       addr, read_val);
80 	else
81 		printf("Failed: mmio read\n");
82 
83 	return ret;
84 }
85 
86 static int do_zynqmp_mmio_write(cmd_tbl_t *cmdtp, int flag, int argc,
87 				char * const argv[])
88 {
89 	u32 addr, mask, val;
90 	int ret;
91 
92 	if (argc != cmdtp->maxargs)
93 		return CMD_RET_USAGE;
94 
95 	addr = simple_strtoul(argv[2], NULL, 16);
96 	mask = simple_strtoul(argv[3], NULL, 16);
97 	val = simple_strtoul(argv[4], NULL, 16);
98 
99 	ret = zynqmp_mmio_write(addr, mask, val);
100 	if (ret != 0)
101 		printf("Failed: mmio write\n");
102 
103 	return ret;
104 }
105 
106 #ifdef CONFIG_DEFINE_TCM_OCM_MMAP
107 static int do_zynqmp_tcm_init(cmd_tbl_t *cmdtp, int flag, int argc,
108 			      char * const argv[])
109 {
110 	u8 mode;
111 
112 	if (argc != cmdtp->maxargs)
113 		return CMD_RET_USAGE;
114 
115 	mode = simple_strtoul(argv[2], NULL, 16);
116 	if (mode != TCM_LOCK && mode != TCM_SPLIT) {
117 		printf("Mode should be either 0(lock)/1(split)\n");
118 		return CMD_RET_FAILURE;
119 	}
120 
121 	dcache_disable();
122 	tcm_init(mode);
123 	dcache_enable();
124 
125 	return CMD_RET_SUCCESS;
126 }
127 #endif
128 
129 static cmd_tbl_t cmd_zynqmp_sub[] = {
130 	U_BOOT_CMD_MKENT(secure, 5, 0, do_zynqmp_verify_secure, "", ""),
131 	U_BOOT_CMD_MKENT(mmio_read, 3, 0, do_zynqmp_mmio_read, "", ""),
132 	U_BOOT_CMD_MKENT(mmio_write, 5, 0, do_zynqmp_mmio_write, "", ""),
133 #ifdef CONFIG_DEFINE_TCM_OCM_MMAP
134 	U_BOOT_CMD_MKENT(tcminit, 3, 0, do_zynqmp_tcm_init, "", ""),
135 #endif
136 };
137 
138 /**
139  * do_zynqmp - Handle the "zynqmp" command-line command
140  * @cmdtp:	Command data struct pointer
141  * @flag:	Command flag
142  * @argc:	Command-line argument count
143  * @argv:	Array of command-line arguments
144  *
145  * Processes the zynqmp specific commands
146  *
147  * Return: return 0 on success and CMD_RET_USAGE incase of misuse and error
148  */
149 static int do_zynqmp(cmd_tbl_t *cmdtp, int flag, int argc,
150 		     char *const argv[])
151 {
152 	cmd_tbl_t *c;
153 
154 	if (argc < 2)
155 		return CMD_RET_USAGE;
156 
157 	c = find_cmd_tbl(argv[1], &cmd_zynqmp_sub[0],
158 			 ARRAY_SIZE(cmd_zynqmp_sub));
159 
160 	if (c)
161 		return c->cmd(c, flag, argc, argv);
162 	else
163 		return CMD_RET_USAGE;
164 }
165 
166 /***************************************************/
167 #ifdef CONFIG_SYS_LONGHELP
168 static char zynqmp_help_text[] =
169 	"secure src len [key_addr] - verifies secure images of $len bytes\n"
170 	"                            long at address $src. Optional key_addr\n"
171 	"                            can be specified if user key needs to\n"
172 	"                            be used for decryption\n"
173 	"zynqmp mmio_read address - read from address\n"
174 	"zynqmp mmio_write address mask value - write value after masking to\n"
175 	"					address\n"
176 #ifdef CONFIG_DEFINE_TCM_OCM_MMAP
177 	"zynqmp tcminit mode - Initialize the TCM with zeros. TCM needs to be\n"
178 	"		       initialized before accessing to avoid ECC\n"
179 	"		       errors. mode specifies in which mode TCM has\n"
180 	"		       to be initialized. Supported modes will be\n"
181 	"		       lock(0)/split(1)\n"
182 #endif
183 	;
184 #endif
185 
186 U_BOOT_CMD(
187 	zynqmp, 5, 1, do_zynqmp,
188 	"ZynqMP sub-system",
189 	zynqmp_help_text
190 )
191