xref: /openbmc/u-boot/board/xilinx/zynqmp/cmds.c (revision 09d84117)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * (C) Copyright 2018 Xilinx, Inc.
4  * Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
5  */
6 
7 #include <common.h>
8 #include <malloc.h>
9 #include <asm/arch/sys_proto.h>
10 #include <asm/io.h>
11 
12 static int do_zynqmp_verify_secure(cmd_tbl_t *cmdtp, int flag, int argc,
13 				   char * const argv[])
14 {
15 	u64 src_addr, addr;
16 	u32 len, src_lo, src_hi;
17 	u8 *key_ptr = NULL;
18 	int ret;
19 	u32 key_lo = 0;
20 	u32 key_hi = 0;
21 	u32 ret_payload[PAYLOAD_ARG_CNT];
22 
23 	if (argc < 4)
24 		return CMD_RET_USAGE;
25 
26 	src_addr = simple_strtoull(argv[2], NULL, 16);
27 	len = simple_strtoul(argv[3], NULL, 16);
28 
29 	if (argc == 5)
30 		key_ptr = (uint8_t *)(uintptr_t)simple_strtoull(argv[4],
31 								NULL, 16);
32 
33 	if ((ulong)src_addr != ALIGN((ulong)src_addr,
34 				     CONFIG_SYS_CACHELINE_SIZE)) {
35 		printf("Failed: source address not aligned:%lx\n",
36 		       (ulong)src_addr);
37 		return -EINVAL;
38 	}
39 
40 	src_lo = lower_32_bits((ulong)src_addr);
41 	src_hi = upper_32_bits((ulong)src_addr);
42 	flush_dcache_range((ulong)src_addr, (ulong)(src_addr + len));
43 
44 	if (key_ptr) {
45 		key_lo = lower_32_bits((ulong)key_ptr);
46 		key_hi = upper_32_bits((ulong)key_ptr);
47 		flush_dcache_range((ulong)key_ptr,
48 				   (ulong)(key_ptr + KEY_PTR_LEN));
49 	}
50 
51 	ret = invoke_smc(ZYNQMP_SIP_SVC_PM_SECURE_IMG_LOAD, src_lo, src_hi,
52 			 key_lo, key_hi, ret_payload);
53 	if (ret) {
54 		printf("Failed: secure op status:0x%x\n", ret);
55 	} else {
56 		addr = (u64)ret_payload[1] << 32 | ret_payload[2];
57 		printf("Verified image at 0x%llx\n", addr);
58 		env_set_hex("zynqmp_verified_img_addr", addr);
59 	}
60 
61 	return ret;
62 }
63 
64 static int do_zynqmp_mmio_read(cmd_tbl_t *cmdtp, int flag, int argc,
65 			       char * const argv[])
66 {
67 	u32 read_val, addr;
68 	int ret;
69 
70 	if (argc != cmdtp->maxargs)
71 		return CMD_RET_USAGE;
72 
73 	addr = simple_strtoul(argv[2], NULL, 16);
74 
75 	ret = zynqmp_mmio_read(addr, &read_val);
76 	if (!ret)
77 		printf("mmio read value at 0x%x = 0x%x\n",
78 		       addr, read_val);
79 	else
80 		printf("Failed: mmio read\n");
81 
82 	return ret;
83 }
84 
85 static int do_zynqmp_mmio_write(cmd_tbl_t *cmdtp, int flag, int argc,
86 				char * const argv[])
87 {
88 	u32 addr, mask, val;
89 	int ret;
90 
91 	if (argc != cmdtp->maxargs)
92 		return CMD_RET_USAGE;
93 
94 	addr = simple_strtoul(argv[2], NULL, 16);
95 	mask = simple_strtoul(argv[3], NULL, 16);
96 	val = simple_strtoul(argv[4], NULL, 16);
97 
98 	ret = zynqmp_mmio_write(addr, mask, val);
99 	if (ret != 0)
100 		printf("Failed: mmio write\n");
101 
102 	return ret;
103 }
104 
105 static cmd_tbl_t cmd_zynqmp_sub[] = {
106 	U_BOOT_CMD_MKENT(secure, 5, 0, do_zynqmp_verify_secure, "", ""),
107 	U_BOOT_CMD_MKENT(mmio_read, 3, 0, do_zynqmp_mmio_read, "", ""),
108 	U_BOOT_CMD_MKENT(mmio_write, 5, 0, do_zynqmp_mmio_write, "", ""),
109 };
110 
111 /**
112  * do_zynqmp - Handle the "zynqmp" command-line command
113  * @cmdtp:	Command data struct pointer
114  * @flag:	Command flag
115  * @argc:	Command-line argument count
116  * @argv:	Array of command-line arguments
117  *
118  * Processes the zynqmp specific commands
119  *
120  * Return: return 0 on success and CMD_RET_USAGE incase of misuse and error
121  */
122 static int do_zynqmp(cmd_tbl_t *cmdtp, int flag, int argc,
123 		     char *const argv[])
124 {
125 	cmd_tbl_t *c;
126 
127 	if (argc < 2)
128 		return CMD_RET_USAGE;
129 
130 	c = find_cmd_tbl(argv[1], &cmd_zynqmp_sub[0],
131 			 ARRAY_SIZE(cmd_zynqmp_sub));
132 
133 	if (c)
134 		return c->cmd(c, flag, argc, argv);
135 	else
136 		return CMD_RET_USAGE;
137 }
138 
139 /***************************************************/
140 #ifdef CONFIG_SYS_LONGHELP
141 static char zynqmp_help_text[] =
142 	"secure src len [key_addr] - verifies secure images of $len bytes\n"
143 	"                            long at address $src. Optional key_addr\n"
144 	"                            can be specified if user key needs to\n"
145 	"                            be used for decryption\n"
146 	"zynqmp mmio_read address - read from address\n"
147 	"zynqmp mmio_write address mask value - write value after masking to\n"
148 	"					address\n";
149 #endif
150 
151 U_BOOT_CMD(
152 	zynqmp, 5, 1, do_zynqmp,
153 	"ZynqMP sub-system",
154 	zynqmp_help_text
155 )
156