xref: /openbmc/u-boot/board/xilinx/zynq/board.c (revision f739fcd8)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
4  * (C) Copyright 2013 - 2018 Xilinx, Inc.
5  */
6 
7 #include <common.h>
8 #include <dm/uclass.h>
9 #include <fdtdec.h>
10 #include <fpga.h>
11 #include <mmc.h>
12 #include <wdt.h>
13 #include <zynqpl.h>
14 #include <asm/arch/hardware.h>
15 #include <asm/arch/sys_proto.h>
16 #include <asm/arch/ps7_init_gpl.h>
17 
18 DECLARE_GLOBAL_DATA_PTR;
19 
20 #if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
21     (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
22 static xilinx_desc fpga;
23 
24 /* It can be done differently */
25 static xilinx_desc fpga007s = XILINX_XC7Z007S_DESC(0x7);
26 static xilinx_desc fpga010 = XILINX_XC7Z010_DESC(0x10);
27 static xilinx_desc fpga012s = XILINX_XC7Z012S_DESC(0x12);
28 static xilinx_desc fpga014s = XILINX_XC7Z014S_DESC(0x14);
29 static xilinx_desc fpga015 = XILINX_XC7Z015_DESC(0x15);
30 static xilinx_desc fpga020 = XILINX_XC7Z020_DESC(0x20);
31 static xilinx_desc fpga030 = XILINX_XC7Z030_DESC(0x30);
32 static xilinx_desc fpga035 = XILINX_XC7Z035_DESC(0x35);
33 static xilinx_desc fpga045 = XILINX_XC7Z045_DESC(0x45);
34 static xilinx_desc fpga100 = XILINX_XC7Z100_DESC(0x100);
35 #endif
36 
37 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT)
38 static struct udevice *watchdog_dev;
39 #endif
40 
41 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_BOARD_EARLY_INIT_F)
42 int board_early_init_f(void)
43 {
44 # if defined(CONFIG_WDT)
45 	/* bss is not cleared at time when watchdog_reset() is called */
46 	watchdog_dev = NULL;
47 # endif
48 
49 	return 0;
50 }
51 #endif
52 
53 int board_init(void)
54 {
55 #if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
56     (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
57 	u32 idcode;
58 
59 	idcode = zynq_slcr_get_idcode();
60 
61 	switch (idcode) {
62 	case XILINX_ZYNQ_7007S:
63 		fpga = fpga007s;
64 		break;
65 	case XILINX_ZYNQ_7010:
66 		fpga = fpga010;
67 		break;
68 	case XILINX_ZYNQ_7012S:
69 		fpga = fpga012s;
70 		break;
71 	case XILINX_ZYNQ_7014S:
72 		fpga = fpga014s;
73 		break;
74 	case XILINX_ZYNQ_7015:
75 		fpga = fpga015;
76 		break;
77 	case XILINX_ZYNQ_7020:
78 		fpga = fpga020;
79 		break;
80 	case XILINX_ZYNQ_7030:
81 		fpga = fpga030;
82 		break;
83 	case XILINX_ZYNQ_7035:
84 		fpga = fpga035;
85 		break;
86 	case XILINX_ZYNQ_7045:
87 		fpga = fpga045;
88 		break;
89 	case XILINX_ZYNQ_7100:
90 		fpga = fpga100;
91 		break;
92 	}
93 #endif
94 
95 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT)
96 	if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
97 		puts("Watchdog: Not found!\n");
98 	} else {
99 		wdt_start(watchdog_dev, 0, 0);
100 		puts("Watchdog: Started\n");
101 	}
102 # endif
103 
104 #if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
105     (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
106 	fpga_init();
107 	fpga_add(fpga_xilinx, &fpga);
108 #endif
109 
110 	return 0;
111 }
112 
113 int board_late_init(void)
114 {
115 	switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
116 	case ZYNQ_BM_QSPI:
117 		env_set("modeboot", "qspiboot");
118 		break;
119 	case ZYNQ_BM_NAND:
120 		env_set("modeboot", "nandboot");
121 		break;
122 	case ZYNQ_BM_NOR:
123 		env_set("modeboot", "norboot");
124 		break;
125 	case ZYNQ_BM_SD:
126 		env_set("modeboot", "sdboot");
127 		break;
128 	case ZYNQ_BM_JTAG:
129 		env_set("modeboot", "jtagboot");
130 		break;
131 	default:
132 		env_set("modeboot", "");
133 		break;
134 	}
135 
136 	return 0;
137 }
138 
139 #ifdef CONFIG_DISPLAY_BOARDINFO
140 int checkboard(void)
141 {
142 	u32 version = zynq_get_silicon_version();
143 
144 	version <<= 1;
145 	if (version > (PCW_SILICON_VERSION_3 << 1))
146 		version += 1;
147 
148 	puts("Board: Xilinx Zynq\n");
149 	printf("Silicon: v%d.%d\n", version >> 1, version & 1);
150 
151 	return 0;
152 }
153 #endif
154 
155 int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
156 {
157 #if defined(CONFIG_ZYNQ_GEM_EEPROM_ADDR) && \
158     defined(CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET)
159 	if (eeprom_read(CONFIG_ZYNQ_GEM_EEPROM_ADDR,
160 			CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET,
161 			ethaddr, 6))
162 		printf("I2C EEPROM MAC address read failed\n");
163 #endif
164 
165 	return 0;
166 }
167 
168 #if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
169 int dram_init_banksize(void)
170 {
171 	return fdtdec_setup_memory_banksize();
172 }
173 
174 int dram_init(void)
175 {
176 	if (fdtdec_setup_memory_size() != 0)
177 		return -EINVAL;
178 
179 	zynq_ddrc_init();
180 
181 	return 0;
182 }
183 #else
184 int dram_init(void)
185 {
186 	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
187 				    CONFIG_SYS_SDRAM_SIZE);
188 
189 	zynq_ddrc_init();
190 
191 	return 0;
192 }
193 #endif
194 
195 #if defined(CONFIG_WATCHDOG)
196 /* Called by macro WATCHDOG_RESET */
197 void watchdog_reset(void)
198 {
199 # if !defined(CONFIG_SPL_BUILD)
200 	static ulong next_reset;
201 	ulong now;
202 
203 	if (!watchdog_dev)
204 		return;
205 
206 	now = timer_get_us();
207 
208 	/* Do not reset the watchdog too often */
209 	if (now > next_reset) {
210 		wdt_reset(watchdog_dev);
211 		next_reset = now + 1000;
212 	}
213 # endif
214 }
215 #endif
216