xref: /openbmc/u-boot/board/xes/common/fsl_8xxx_pci.c (revision 87a62bce)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright 2008 Extreme Engineering Solutions, Inc.
4  * Copyright 2007-2008 Freescale Semiconductor, Inc.
5  */
6 
7 #include <common.h>
8 #include <pci.h>
9 #include <asm/fsl_pci.h>
10 #include <asm/fsl_serdes.h>
11 #include <asm/io.h>
12 #include <linux/compiler.h>
13 #include <linux/libfdt.h>
14 #include <fdt_support.h>
15 
16 
17 #ifdef CONFIG_PCI1
18 static struct pci_controller pci1_hose;
19 #endif
20 
21 void pci_init_board(void)
22 {
23 	int first_free_busno = 0;
24 
25 #ifdef CONFIG_PCI1
26 	int pcie_ep;
27 	struct fsl_pci_info pci_info;
28 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
29 	u32 devdisr = in_be32(&gur->devdisr);
30 	uint pci_spd_norm = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_SPD;
31 	uint pci_32 = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_PCI32;
32 	uint pci_arb = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_ARB;
33 	uint pcix = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1;
34 	uint freq = CONFIG_SYS_CLK_FREQ / 1000 / 1000;
35 
36 	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
37 		SET_STD_PCI_INFO(pci_info, 1);
38 		set_next_law(pci_info.mem_phys,
39 			law_size_bits(pci_info.mem_size), pci_info.law);
40 		set_next_law(pci_info.io_phys,
41 			law_size_bits(pci_info.io_size), pci_info.law);
42 
43 		pcie_ep = fsl_setup_hose(&pci1_hose, pci_info.regs);
44 		printf("PCI1: %d bit %s, %s %d MHz, %s, %s\n",
45 			pci_32 ? 32 : 64,
46 			pcix ? "PCIX" : "PCI",
47 			pci_spd_norm ? ">=" : "<=",
48 			pcix ? freq * 2 : freq,
49 			pcie_ep ? "agent" : "host",
50 			pci_arb ? "arbiter" : "external-arbiter");
51 
52 		first_free_busno = fsl_pci_init_port(&pci_info,
53 					&pci1_hose, first_free_busno);
54 	} else {
55 		printf("PCI1: disabled\n");
56 	}
57 #elif defined CONFIG_ARCH_MPC8548
58 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
59 	/* PCI1 not present on MPC8572 */
60 	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1);
61 #endif
62 
63 	fsl_pcie_init_board(first_free_busno);
64 }
65 
66 #if defined(CONFIG_OF_BOARD_SETUP)
67 void ft_board_pci_setup(void *blob, bd_t *bd)
68 {
69 	FT_FSL_PCI_SETUP;
70 }
71 #endif /* CONFIG_OF_BOARD_SETUP */
72