1 /* 2 * Copyright (C) 2012, Stefano Babic <sbabic@denx.de> 3 * 4 * Based on flea3.c and mx35pdk.c 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 #include <common.h> 26 #include <asm/io.h> 27 #include <asm/errno.h> 28 #include <asm/arch/imx-regs.h> 29 #include <asm/arch/crm_regs.h> 30 #include <asm/arch/clock.h> 31 #include <asm/arch/mx35_pins.h> 32 #include <asm/arch/iomux.h> 33 #include <i2c.h> 34 #include <power/pmic.h> 35 #include <fsl_pmic.h> 36 #include <mc13892.h> 37 #include <mmc.h> 38 #include <fsl_esdhc.h> 39 #include <linux/types.h> 40 #include <asm/gpio.h> 41 #include <asm/arch/sys_proto.h> 42 #include <netdev.h> 43 #include <spl.h> 44 45 #define CCM_CCMR_CONFIG 0x003F4208 46 47 #define ESDCTL_DDR2_CONFIG 0x007FFC3F 48 49 /* For MMC */ 50 #define GPIO_MMC_CD 7 51 #define GPIO_MMC_WP 8 52 53 DECLARE_GLOBAL_DATA_PTR; 54 55 int dram_init(void) 56 { 57 gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, 58 PHYS_SDRAM_1_SIZE); 59 60 return 0; 61 } 62 63 static void board_setup_sdram(void) 64 { 65 struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR; 66 67 /* Initialize with default values both CSD0/1 */ 68 writel(0x2000, &esdc->esdctl0); 69 writel(0x2000, &esdc->esdctl1); 70 71 mx3_setup_sdram_bank(CSD0_BASE_ADDR, ESDCTL_DDR2_CONFIG, 72 13, 10, 2, 0x8080); 73 } 74 75 static void setup_iomux_fec(void) 76 { 77 /* setup pins for FEC */ 78 mxc_request_iomux(MX35_PIN_FEC_TX_CLK, MUX_CONFIG_FUNC); 79 mxc_request_iomux(MX35_PIN_FEC_RX_CLK, MUX_CONFIG_FUNC); 80 mxc_request_iomux(MX35_PIN_FEC_RX_DV, MUX_CONFIG_FUNC); 81 mxc_request_iomux(MX35_PIN_FEC_COL, MUX_CONFIG_FUNC); 82 mxc_request_iomux(MX35_PIN_FEC_RDATA0, MUX_CONFIG_FUNC); 83 mxc_request_iomux(MX35_PIN_FEC_TDATA0, MUX_CONFIG_FUNC); 84 mxc_request_iomux(MX35_PIN_FEC_TX_EN, MUX_CONFIG_FUNC); 85 mxc_request_iomux(MX35_PIN_FEC_MDC, MUX_CONFIG_FUNC); 86 mxc_request_iomux(MX35_PIN_FEC_MDIO, MUX_CONFIG_FUNC); 87 mxc_request_iomux(MX35_PIN_FEC_TX_ERR, MUX_CONFIG_FUNC); 88 mxc_request_iomux(MX35_PIN_FEC_RX_ERR, MUX_CONFIG_FUNC); 89 mxc_request_iomux(MX35_PIN_FEC_CRS, MUX_CONFIG_FUNC); 90 mxc_request_iomux(MX35_PIN_FEC_RDATA1, MUX_CONFIG_FUNC); 91 mxc_request_iomux(MX35_PIN_FEC_TDATA1, MUX_CONFIG_FUNC); 92 mxc_request_iomux(MX35_PIN_FEC_RDATA2, MUX_CONFIG_FUNC); 93 mxc_request_iomux(MX35_PIN_FEC_TDATA2, MUX_CONFIG_FUNC); 94 mxc_request_iomux(MX35_PIN_FEC_RDATA3, MUX_CONFIG_FUNC); 95 mxc_request_iomux(MX35_PIN_FEC_TDATA3, MUX_CONFIG_FUNC); 96 } 97 98 int woodburn_init(void) 99 { 100 struct ccm_regs *ccm = 101 (struct ccm_regs *)IMX_CCM_BASE; 102 103 /* initialize PLL and clock configuration */ 104 writel(CCM_CCMR_CONFIG, &ccm->ccmr); 105 106 /* Set-up RAM */ 107 board_setup_sdram(); 108 109 /* enable clocks */ 110 writel(readl(&ccm->cgr0) | 111 MXC_CCM_CGR0_EMI_MASK | 112 MXC_CCM_CGR0_EDIO_MASK | 113 MXC_CCM_CGR0_EPIT1_MASK, 114 &ccm->cgr0); 115 116 writel(readl(&ccm->cgr1) | 117 MXC_CCM_CGR1_FEC_MASK | 118 MXC_CCM_CGR1_GPIO1_MASK | 119 MXC_CCM_CGR1_GPIO2_MASK | 120 MXC_CCM_CGR1_GPIO3_MASK | 121 MXC_CCM_CGR1_I2C1_MASK | 122 MXC_CCM_CGR1_I2C2_MASK | 123 MXC_CCM_CGR1_I2C3_MASK, 124 &ccm->cgr1); 125 126 /* Set-up NAND */ 127 __raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr); 128 129 /* Set pinmux for the required peripherals */ 130 setup_iomux_fec(); 131 132 /* setup GPIO1_4 FEC_ENABLE signal */ 133 mxc_request_iomux(MX35_PIN_SCKR, MUX_CONFIG_ALT5); 134 gpio_direction_output(4, 1); 135 mxc_request_iomux(MX35_PIN_HCKT, MUX_CONFIG_ALT5); 136 gpio_direction_output(9, 1); 137 138 return 0; 139 } 140 141 #if defined(CONFIG_SPL_BUILD) 142 void board_init_f(ulong dummy) 143 { 144 /* Set the stack pointer. */ 145 asm volatile("mov sp, %0\n" : : "r"(CONFIG_SPL_STACK)); 146 147 /* Initialize MUX and SDRAM */ 148 woodburn_init(); 149 150 /* Clear the BSS. */ 151 memset(__bss_start, 0, __bss_end__ - __bss_start); 152 153 /* Set global data pointer. */ 154 gd = &gdata; 155 156 preloader_console_init(); 157 timer_init(); 158 159 board_init_r(NULL, 0); 160 } 161 162 void spl_board_init(void) 163 { 164 } 165 166 #endif 167 168 169 /* Booting from NOR in external mode */ 170 int board_early_init_f(void) 171 { 172 return woodburn_init(); 173 } 174 175 176 int board_init(void) 177 { 178 struct pmic *p; 179 u32 val; 180 int ret; 181 182 /* address of boot parameters */ 183 gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; 184 185 ret = pmic_init(I2C_PMIC); 186 if (ret) 187 return ret; 188 189 p = pmic_get("FSL_PMIC"); 190 191 /* 192 * Set switchers in Auto in NORMAL mode & STANDBY mode 193 * Setup the switcher mode for SW1 & SW2 194 */ 195 pmic_reg_read(p, REG_SW_4, &val); 196 val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) | 197 (SWMODE_MASK << SWMODE2_SHIFT))); 198 val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) | 199 (SWMODE_AUTO_AUTO << SWMODE2_SHIFT); 200 /* Set SWILIMB */ 201 val |= (1 << 22); 202 pmic_reg_write(p, REG_SW_4, val); 203 204 /* Setup the switcher mode for SW3 & SW4 */ 205 pmic_reg_read(p, REG_SW_5, &val); 206 val &= ~((SWMODE_MASK << SWMODE4_SHIFT) | 207 (SWMODE_MASK << SWMODE3_SHIFT)); 208 val |= (SWMODE_AUTO_AUTO << SWMODE4_SHIFT) | 209 (SWMODE_AUTO_AUTO << SWMODE3_SHIFT); 210 pmic_reg_write(p, REG_SW_5, val); 211 212 /* Set VGEN1 to 3.15V */ 213 pmic_reg_read(p, REG_SETTING_0, &val); 214 val &= ~(VGEN1_MASK); 215 val |= VGEN1_3_15; 216 pmic_reg_write(p, REG_SETTING_0, val); 217 218 pmic_reg_read(p, REG_MODE_0, &val); 219 val |= VGEN1EN; 220 pmic_reg_write(p, REG_MODE_0, val); 221 udelay(2000); 222 223 return 0; 224 } 225 226 #if defined(CONFIG_FSL_ESDHC) 227 struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR}; 228 229 int board_mmc_init(bd_t *bis) 230 { 231 /* configure pins for SDHC1 only */ 232 mxc_request_iomux(MX35_PIN_SD1_CMD, MUX_CONFIG_FUNC); 233 mxc_request_iomux(MX35_PIN_SD1_CLK, MUX_CONFIG_FUNC); 234 mxc_request_iomux(MX35_PIN_SD1_DATA0, MUX_CONFIG_FUNC); 235 mxc_request_iomux(MX35_PIN_SD1_DATA1, MUX_CONFIG_FUNC); 236 mxc_request_iomux(MX35_PIN_SD1_DATA2, MUX_CONFIG_FUNC); 237 mxc_request_iomux(MX35_PIN_SD1_DATA3, MUX_CONFIG_FUNC); 238 239 /* MMC Card Detect on GPIO1_7 */ 240 mxc_request_iomux(MX35_PIN_SCKT, MUX_CONFIG_ALT5); 241 mxc_iomux_set_input(MUX_IN_GPIO1_IN_7, 0x1); 242 gpio_direction_input(GPIO_MMC_CD); 243 244 mxc_request_iomux(MX35_PIN_FST, MUX_CONFIG_ALT5); 245 mxc_iomux_set_input(MUX_IN_GPIO1_IN_8, 0x1); 246 gpio_direction_output(GPIO_MMC_WP, 0); 247 248 esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK); 249 250 return fsl_esdhc_initialize(bis, &esdhc_cfg); 251 } 252 253 int board_mmc_getcd(struct mmc *mmc) 254 { 255 return !gpio_get_value(GPIO_MMC_CD); 256 } 257 #endif 258 259 u32 get_board_rev(void) 260 { 261 int rev = 0; 262 263 return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8; 264 } 265