1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (C) 2013 Freescale Semiconductor, Inc. 4 * Copyright (C) 2014 O.S. Systems Software LTDA. 5 * 6 * Author: Fabio Estevam <fabio.estevam@freescale.com> 7 */ 8 9 #include <asm/arch/clock.h> 10 #include <asm/arch/crm_regs.h> 11 #include <asm/arch/iomux.h> 12 #include <asm/arch/imx-regs.h> 13 #include <asm/arch/mx6-pins.h> 14 #include <asm/arch/mxc_hdmi.h> 15 #include <asm/arch/sys_proto.h> 16 #include <asm/gpio.h> 17 #include <asm/mach-imx/iomux-v3.h> 18 #include <asm/mach-imx/mxc_i2c.h> 19 #include <asm/mach-imx/boot_mode.h> 20 #include <asm/mach-imx/video.h> 21 #include <asm/mach-imx/sata.h> 22 #include <asm/io.h> 23 #include <linux/sizes.h> 24 #include <common.h> 25 #include <fsl_esdhc.h> 26 #include <mmc.h> 27 #include <miiphy.h> 28 #include <netdev.h> 29 #include <phy.h> 30 #include <i2c.h> 31 #include <power/pmic.h> 32 #include <power/pfuze100_pmic.h> 33 34 DECLARE_GLOBAL_DATA_PTR; 35 36 #define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ 37 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ 38 PAD_CTL_SRE_FAST | PAD_CTL_HYS) 39 40 #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ 41 PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ 42 PAD_CTL_SRE_FAST | PAD_CTL_HYS) 43 44 #define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ 45 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) 46 47 #define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ 48 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ 49 PAD_CTL_ODE | PAD_CTL_SRE_FAST) 50 51 #define USDHC1_CD_GPIO IMX_GPIO_NR(1, 2) 52 #define USDHC3_CD_GPIO IMX_GPIO_NR(3, 9) 53 #define ETH_PHY_RESET IMX_GPIO_NR(3, 29) 54 #define ETH_PHY_AR8035_POWER IMX_GPIO_NR(7, 13) 55 #define REV_DETECTION IMX_GPIO_NR(2, 28) 56 57 static bool with_pmic; 58 59 int dram_init(void) 60 { 61 gd->ram_size = imx_ddr_size(); 62 63 return 0; 64 } 65 66 static iomux_v3_cfg_t const uart1_pads[] = { 67 IOMUX_PADS(PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), 68 IOMUX_PADS(PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), 69 }; 70 71 static iomux_v3_cfg_t const usdhc1_pads[] = { 72 IOMUX_PADS(PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 73 IOMUX_PADS(PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 74 IOMUX_PADS(PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 75 IOMUX_PADS(PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 76 IOMUX_PADS(PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 77 IOMUX_PADS(PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 78 /* Carrier MicroSD Card Detect */ 79 IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL)), 80 }; 81 82 static iomux_v3_cfg_t const usdhc3_pads[] = { 83 IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 84 IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 85 IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 86 IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 87 IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 88 IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 89 /* SOM MicroSD Card Detect */ 90 IOMUX_PADS(PAD_EIM_DA9__GPIO3_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)), 91 }; 92 93 static iomux_v3_cfg_t const enet_pads[] = { 94 IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)), 95 IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)), 96 IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)), 97 IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)), 98 IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)), 99 IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)), 100 IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)), 101 IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)), 102 IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL)), 103 IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)), 104 IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)), 105 IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)), 106 IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)), 107 IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)), 108 IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)), 109 /* AR8031 PHY Reset */ 110 IOMUX_PADS(PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)), 111 }; 112 113 static iomux_v3_cfg_t const enet_ar8035_power_pads[] = { 114 /* AR8035 POWER */ 115 IOMUX_PADS(PAD_GPIO_18__GPIO7_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL)), 116 }; 117 118 static iomux_v3_cfg_t const rev_detection_pad[] = { 119 IOMUX_PADS(PAD_EIM_EB0__GPIO2_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL)), 120 }; 121 122 static void setup_iomux_uart(void) 123 { 124 SETUP_IOMUX_PADS(uart1_pads); 125 } 126 127 static void setup_iomux_enet(void) 128 { 129 SETUP_IOMUX_PADS(enet_pads); 130 131 if (with_pmic) { 132 SETUP_IOMUX_PADS(enet_ar8035_power_pads); 133 /* enable AR8035 POWER */ 134 gpio_direction_output(ETH_PHY_AR8035_POWER, 0); 135 } 136 /* wait until 3.3V of PHY and clock become stable */ 137 mdelay(10); 138 139 /* Reset AR8031 PHY */ 140 gpio_direction_output(ETH_PHY_RESET, 0); 141 mdelay(10); 142 gpio_set_value(ETH_PHY_RESET, 1); 143 udelay(100); 144 } 145 146 static struct fsl_esdhc_cfg usdhc_cfg[2] = { 147 {USDHC3_BASE_ADDR}, 148 {USDHC1_BASE_ADDR}, 149 }; 150 151 int board_mmc_getcd(struct mmc *mmc) 152 { 153 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 154 int ret = 0; 155 156 switch (cfg->esdhc_base) { 157 case USDHC1_BASE_ADDR: 158 ret = !gpio_get_value(USDHC1_CD_GPIO); 159 break; 160 case USDHC3_BASE_ADDR: 161 ret = !gpio_get_value(USDHC3_CD_GPIO); 162 break; 163 } 164 165 return ret; 166 } 167 168 int board_mmc_init(bd_t *bis) 169 { 170 int ret; 171 u32 index = 0; 172 173 /* 174 * Following map is done: 175 * (U-Boot device node) (Physical Port) 176 * mmc0 SOM MicroSD 177 * mmc1 Carrier board MicroSD 178 */ 179 for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { 180 switch (index) { 181 case 0: 182 SETUP_IOMUX_PADS(usdhc3_pads); 183 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); 184 usdhc_cfg[0].max_bus_width = 4; 185 gpio_direction_input(USDHC3_CD_GPIO); 186 break; 187 case 1: 188 SETUP_IOMUX_PADS(usdhc1_pads); 189 usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); 190 usdhc_cfg[1].max_bus_width = 4; 191 gpio_direction_input(USDHC1_CD_GPIO); 192 break; 193 default: 194 printf("Warning: you configured more USDHC controllers" 195 "(%d) then supported by the board (%d)\n", 196 index + 1, CONFIG_SYS_FSL_USDHC_NUM); 197 return -EINVAL; 198 } 199 200 ret = fsl_esdhc_initialize(bis, &usdhc_cfg[index]); 201 if (ret) 202 return ret; 203 } 204 205 return 0; 206 } 207 208 static int ar8031_phy_fixup(struct phy_device *phydev) 209 { 210 unsigned short val; 211 int mask; 212 213 /* To enable AR8031 ouput a 125MHz clk from CLK_25M */ 214 phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7); 215 phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016); 216 phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007); 217 218 val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe); 219 if (with_pmic) 220 mask = 0xffe7; /* AR8035 */ 221 else 222 mask = 0xffe3; /* AR8031 */ 223 224 val &= mask; 225 val |= 0x18; 226 phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val); 227 228 /* introduce tx clock delay */ 229 phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5); 230 val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e); 231 val |= 0x0100; 232 phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val); 233 234 return 0; 235 } 236 237 int board_phy_config(struct phy_device *phydev) 238 { 239 ar8031_phy_fixup(phydev); 240 241 if (phydev->drv->config) 242 phydev->drv->config(phydev); 243 244 return 0; 245 } 246 247 #if defined(CONFIG_VIDEO_IPUV3) 248 struct i2c_pads_info mx6q_i2c2_pad_info = { 249 .scl = { 250 .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL 251 | MUX_PAD_CTRL(I2C_PAD_CTRL), 252 .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 253 | MUX_PAD_CTRL(I2C_PAD_CTRL), 254 .gp = IMX_GPIO_NR(4, 12) 255 }, 256 .sda = { 257 .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA 258 | MUX_PAD_CTRL(I2C_PAD_CTRL), 259 .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 260 | MUX_PAD_CTRL(I2C_PAD_CTRL), 261 .gp = IMX_GPIO_NR(4, 13) 262 } 263 }; 264 265 struct i2c_pads_info mx6dl_i2c2_pad_info = { 266 .scl = { 267 .i2c_mode = MX6DL_PAD_KEY_COL3__I2C2_SCL 268 | MUX_PAD_CTRL(I2C_PAD_CTRL), 269 .gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 270 | MUX_PAD_CTRL(I2C_PAD_CTRL), 271 .gp = IMX_GPIO_NR(4, 12) 272 }, 273 .sda = { 274 .i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA 275 | MUX_PAD_CTRL(I2C_PAD_CTRL), 276 .gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 277 | MUX_PAD_CTRL(I2C_PAD_CTRL), 278 .gp = IMX_GPIO_NR(4, 13) 279 } 280 }; 281 282 struct i2c_pads_info mx6q_i2c3_pad_info = { 283 .scl = { 284 .i2c_mode = MX6Q_PAD_GPIO_5__I2C3_SCL 285 | MUX_PAD_CTRL(I2C_PAD_CTRL), 286 .gpio_mode = MX6Q_PAD_GPIO_5__GPIO1_IO05 287 | MUX_PAD_CTRL(I2C_PAD_CTRL), 288 .gp = IMX_GPIO_NR(1, 5) 289 }, 290 .sda = { 291 .i2c_mode = MX6Q_PAD_GPIO_16__I2C3_SDA 292 | MUX_PAD_CTRL(I2C_PAD_CTRL), 293 .gpio_mode = MX6Q_PAD_GPIO_16__GPIO7_IO11 294 | MUX_PAD_CTRL(I2C_PAD_CTRL), 295 .gp = IMX_GPIO_NR(7, 11) 296 } 297 }; 298 299 struct i2c_pads_info mx6dl_i2c3_pad_info = { 300 .scl = { 301 .i2c_mode = MX6DL_PAD_GPIO_5__I2C3_SCL 302 | MUX_PAD_CTRL(I2C_PAD_CTRL), 303 .gpio_mode = MX6DL_PAD_GPIO_5__GPIO1_IO05 304 | MUX_PAD_CTRL(I2C_PAD_CTRL), 305 .gp = IMX_GPIO_NR(1, 5) 306 }, 307 .sda = { 308 .i2c_mode = MX6DL_PAD_GPIO_16__I2C3_SDA 309 | MUX_PAD_CTRL(I2C_PAD_CTRL), 310 .gpio_mode = MX6DL_PAD_GPIO_16__GPIO7_IO11 311 | MUX_PAD_CTRL(I2C_PAD_CTRL), 312 .gp = IMX_GPIO_NR(7, 11) 313 } 314 }; 315 316 static iomux_v3_cfg_t const fwadapt_7wvga_pads[] = { 317 IOMUX_PADS(PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK), 318 IOMUX_PADS(PAD_DI0_PIN2__IPU1_DI0_PIN02), /* HSync */ 319 IOMUX_PADS(PAD_DI0_PIN3__IPU1_DI0_PIN03), /* VSync */ 320 IOMUX_PADS(PAD_DI0_PIN4__IPU1_DI0_PIN04 | MUX_PAD_CTRL(PAD_CTL_DSE_120ohm)), /* Contrast */ 321 IOMUX_PADS(PAD_DI0_PIN15__IPU1_DI0_PIN15), /* DISP0_DRDY */ 322 IOMUX_PADS(PAD_DISP0_DAT0__IPU1_DISP0_DATA00), 323 IOMUX_PADS(PAD_DISP0_DAT1__IPU1_DISP0_DATA01), 324 IOMUX_PADS(PAD_DISP0_DAT2__IPU1_DISP0_DATA02), 325 IOMUX_PADS(PAD_DISP0_DAT3__IPU1_DISP0_DATA03), 326 IOMUX_PADS(PAD_DISP0_DAT4__IPU1_DISP0_DATA04), 327 IOMUX_PADS(PAD_DISP0_DAT5__IPU1_DISP0_DATA05), 328 IOMUX_PADS(PAD_DISP0_DAT6__IPU1_DISP0_DATA06), 329 IOMUX_PADS(PAD_DISP0_DAT7__IPU1_DISP0_DATA07), 330 IOMUX_PADS(PAD_DISP0_DAT8__IPU1_DISP0_DATA08), 331 IOMUX_PADS(PAD_DISP0_DAT9__IPU1_DISP0_DATA09), 332 IOMUX_PADS(PAD_DISP0_DAT10__IPU1_DISP0_DATA10), 333 IOMUX_PADS(PAD_DISP0_DAT11__IPU1_DISP0_DATA11), 334 IOMUX_PADS(PAD_DISP0_DAT12__IPU1_DISP0_DATA12), 335 IOMUX_PADS(PAD_DISP0_DAT13__IPU1_DISP0_DATA13), 336 IOMUX_PADS(PAD_DISP0_DAT14__IPU1_DISP0_DATA14), 337 IOMUX_PADS(PAD_DISP0_DAT15__IPU1_DISP0_DATA15), 338 IOMUX_PADS(PAD_DISP0_DAT16__IPU1_DISP0_DATA16), 339 IOMUX_PADS(PAD_DISP0_DAT17__IPU1_DISP0_DATA17), 340 IOMUX_PADS(PAD_SD4_DAT2__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* DISP0_BKLEN */ 341 IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* DISP0_VDDEN */ 342 }; 343 344 static void do_enable_hdmi(struct display_info_t const *dev) 345 { 346 imx_enable_hdmi_phy(); 347 } 348 349 static int detect_i2c(struct display_info_t const *dev) 350 { 351 return (0 == i2c_set_bus_num(dev->bus)) && 352 (0 == i2c_probe(dev->addr)); 353 } 354 355 static void enable_fwadapt_7wvga(struct display_info_t const *dev) 356 { 357 SETUP_IOMUX_PADS(fwadapt_7wvga_pads); 358 359 gpio_direction_output(IMX_GPIO_NR(2, 10), 1); 360 gpio_direction_output(IMX_GPIO_NR(2, 11), 1); 361 } 362 363 struct display_info_t const displays[] = {{ 364 .bus = -1, 365 .addr = 0, 366 .pixfmt = IPU_PIX_FMT_RGB24, 367 .detect = detect_hdmi, 368 .enable = do_enable_hdmi, 369 .mode = { 370 .name = "HDMI", 371 .refresh = 60, 372 .xres = 1024, 373 .yres = 768, 374 .pixclock = 15385, 375 .left_margin = 220, 376 .right_margin = 40, 377 .upper_margin = 21, 378 .lower_margin = 7, 379 .hsync_len = 60, 380 .vsync_len = 10, 381 .sync = FB_SYNC_EXT, 382 .vmode = FB_VMODE_NONINTERLACED 383 } }, { 384 .bus = 1, 385 .addr = 0x10, 386 .pixfmt = IPU_PIX_FMT_RGB666, 387 .detect = detect_i2c, 388 .enable = enable_fwadapt_7wvga, 389 .mode = { 390 .name = "FWBADAPT-LCD-F07A-0102", 391 .refresh = 60, 392 .xres = 800, 393 .yres = 480, 394 .pixclock = 33260, 395 .left_margin = 128, 396 .right_margin = 128, 397 .upper_margin = 22, 398 .lower_margin = 22, 399 .hsync_len = 1, 400 .vsync_len = 1, 401 .sync = 0, 402 .vmode = FB_VMODE_NONINTERLACED 403 } } }; 404 size_t display_count = ARRAY_SIZE(displays); 405 406 static void setup_display(void) 407 { 408 struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; 409 int reg; 410 411 enable_ipu_clock(); 412 imx_setup_hdmi(); 413 414 reg = readl(&mxc_ccm->chsccdr); 415 reg |= (CHSCCDR_CLK_SEL_LDB_DI0 416 << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET); 417 writel(reg, &mxc_ccm->chsccdr); 418 419 /* Disable LCD backlight */ 420 SETUP_IOMUX_PAD(PAD_DI0_PIN4__GPIO4_IO20); 421 gpio_direction_input(IMX_GPIO_NR(4, 20)); 422 } 423 #endif /* CONFIG_VIDEO_IPUV3 */ 424 425 int board_eth_init(bd_t *bis) 426 { 427 setup_iomux_enet(); 428 429 return cpu_eth_init(bis); 430 } 431 432 int board_early_init_f(void) 433 { 434 setup_iomux_uart(); 435 #ifdef CONFIG_SATA 436 setup_sata(); 437 #endif 438 439 return 0; 440 } 441 442 #define PMIC_I2C_BUS 2 443 444 int power_init_board(void) 445 { 446 struct pmic *p; 447 u32 reg; 448 449 /* configure PFUZE100 PMIC */ 450 power_pfuze100_init(PMIC_I2C_BUS); 451 p = pmic_get("PFUZE100"); 452 if (p && !pmic_probe(p)) { 453 pmic_reg_read(p, PFUZE100_DEVICEID, ®); 454 printf("PMIC: PFUZE100 ID=0x%02x\n", reg); 455 with_pmic = true; 456 457 /* Set VGEN2 to 1.5V and enable */ 458 pmic_reg_read(p, PFUZE100_VGEN2VOL, ®); 459 reg &= ~(LDO_VOL_MASK); 460 reg |= (LDOA_1_50V | (1 << (LDO_EN))); 461 pmic_reg_write(p, PFUZE100_VGEN2VOL, reg); 462 } 463 464 return 0; 465 } 466 467 /* 468 * Do not overwrite the console 469 * Use always serial for U-Boot console 470 */ 471 int overwrite_console(void) 472 { 473 return 1; 474 } 475 476 #ifdef CONFIG_CMD_BMODE 477 static const struct boot_mode board_boot_modes[] = { 478 /* 4 bit bus width */ 479 {"mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, 480 {"mmc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)}, 481 {NULL, 0}, 482 }; 483 #endif 484 485 static bool is_revc1(void) 486 { 487 SETUP_IOMUX_PADS(rev_detection_pad); 488 gpio_direction_input(REV_DETECTION); 489 490 if (gpio_get_value(REV_DETECTION)) 491 return true; 492 else 493 return false; 494 } 495 496 static bool is_revd1(void) 497 { 498 if (with_pmic) 499 return true; 500 else 501 return false; 502 } 503 504 int board_late_init(void) 505 { 506 #ifdef CONFIG_CMD_BMODE 507 add_board_boot_modes(board_boot_modes); 508 #endif 509 510 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 511 if (is_mx6dqp()) 512 env_set("board_rev", "MX6QP"); 513 else if (is_mx6dq()) 514 env_set("board_rev", "MX6Q"); 515 else 516 env_set("board_rev", "MX6DL"); 517 518 if (is_revd1()) 519 env_set("board_name", "D1"); 520 else if (is_revc1()) 521 env_set("board_name", "C1"); 522 else 523 env_set("board_name", "B1"); 524 #endif 525 return 0; 526 } 527 528 int board_init(void) 529 { 530 /* address of boot parameters */ 531 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 532 533 #if defined(CONFIG_VIDEO_IPUV3) 534 setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c2_pad_info); 535 if (is_mx6dq() || is_mx6dqp()) { 536 setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c2_pad_info); 537 setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c3_pad_info); 538 } else { 539 setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c2_pad_info); 540 setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c3_pad_info); 541 } 542 543 setup_display(); 544 #endif 545 546 return 0; 547 } 548 549 int checkboard(void) 550 { 551 if (is_revd1()) 552 puts("Board: Wandboard rev D1\n"); 553 else if (is_revc1()) 554 puts("Board: Wandboard rev C1\n"); 555 else 556 puts("Board: Wandboard rev B1\n"); 557 558 return 0; 559 } 560