1 /* 2 * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 3 * 4 * Author: Scott Wood <scottwood@freescale.com> 5 * 6 * (C) Copyright 2010 7 * Heiko Schocher, DENX Software Engineering, hs@denx.de. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #include <common.h> 13 #include <libfdt.h> 14 #include <pci.h> 15 #include <mpc83xx.h> 16 #include <ns16550.h> 17 #include <nand.h> 18 19 #include <asm/bitops.h> 20 #include <asm/io.h> 21 22 DECLARE_GLOBAL_DATA_PTR; 23 24 extern void disable_addr_trans (void); 25 extern void enable_addr_trans (void); 26 27 int checkboard(void) 28 { 29 puts("Board: ve8313\n"); 30 return 0; 31 } 32 33 static long fixed_sdram(void) 34 { 35 u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024; 36 37 #ifndef CONFIG_SYS_RAMBOOT 38 volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; 39 u32 msize_log2 = __ilog2(msize); 40 41 out_be32(&im->sysconf.ddrlaw[0].bar, 42 (CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000)); 43 out_be32(&im->sysconf.ddrlaw[0].ar, (LBLAWAR_EN | (msize_log2 - 1))); 44 out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE); 45 46 /* 47 * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg], 48 * or the DDR2 controller may fail to initialize correctly. 49 */ 50 __udelay(50000); 51 52 #if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0) 53 #warning Chip select bounds is only configurable in 16MB increments 54 #endif 55 out_be32(&im->ddr.csbnds[0].csbnds, 56 ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | 57 (((CONFIG_SYS_DDR_SDRAM_BASE + msize - 1) >> CSBNDS_EA_SHIFT) & 58 CSBNDS_EA)); 59 out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CS0_CONFIG); 60 61 /* Currently we use only one CS, so disable the other bank. */ 62 out_be32(&im->ddr.cs_config[1], 0); 63 64 out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CNTL); 65 out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3); 66 out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1); 67 out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2); 68 out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0); 69 70 out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_SDRAM_CFG); 71 72 out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_SDRAM_CFG2); 73 out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE); 74 out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE_2); 75 76 out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL); 77 sync(); 78 79 /* enable DDR controller */ 80 setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN); 81 82 /* now check the real size */ 83 disable_addr_trans (); 84 msize = get_ram_size (CONFIG_SYS_DDR_BASE, msize); 85 enable_addr_trans (); 86 #endif 87 88 return msize; 89 } 90 91 phys_size_t initdram(int board_type) 92 { 93 volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; 94 volatile fsl_lbc_t *lbc = &im->im_lbc; 95 u32 msize; 96 97 if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) 98 return -1; 99 100 /* DDR SDRAM - Main SODIMM */ 101 msize = fixed_sdram(); 102 103 /* Local Bus setup lbcr and mrtpr */ 104 out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR); 105 out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR); 106 sync(); 107 108 /* return total bus SDRAM size(bytes) -- DDR */ 109 return msize; 110 } 111 112 #define VE8313_WDT_EN 0x00020000 113 #define VE8313_WDT_TRIG 0x00040000 114 115 int board_early_init_f (void) 116 { 117 volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; 118 volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)im->gpio; 119 120 #if defined(CONFIG_HW_WATCHDOG) 121 /* enable WDT */ 122 clrbits_be32(&gpio->dat, VE8313_WDT_EN | VE8313_WDT_TRIG); 123 #else 124 /* disable WDT */ 125 setbits_be32(&gpio->dat, VE8313_WDT_EN | VE8313_WDT_TRIG); 126 #endif 127 /* set WDT pins as output */ 128 setbits_be32(&gpio->dir, VE8313_WDT_EN | VE8313_WDT_TRIG); 129 130 return 0; 131 } 132 133 #if defined(CONFIG_HW_WATCHDOG) 134 void hw_watchdog_reset(void) 135 { 136 volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; 137 volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)im->gpio; 138 unsigned long reg; 139 140 reg = in_be32(&gpio->dat); 141 if (reg & VE8313_WDT_TRIG) 142 clrbits_be32(&gpio->dat, VE8313_WDT_TRIG); 143 else 144 setbits_be32(&gpio->dat, VE8313_WDT_TRIG); 145 } 146 #endif 147 148 149 #if defined(CONFIG_PCI) 150 static struct pci_region pci_regions[] = { 151 { 152 bus_start: CONFIG_SYS_PCI1_MEM_BASE, 153 phys_start: CONFIG_SYS_PCI1_MEM_PHYS, 154 size: CONFIG_SYS_PCI1_MEM_SIZE, 155 flags: PCI_REGION_MEM | PCI_REGION_PREFETCH 156 }, 157 { 158 bus_start: CONFIG_SYS_PCI1_MMIO_BASE, 159 phys_start: CONFIG_SYS_PCI1_MMIO_PHYS, 160 size: CONFIG_SYS_PCI1_MMIO_SIZE, 161 flags: PCI_REGION_MEM 162 }, 163 { 164 bus_start: CONFIG_SYS_PCI1_IO_BASE, 165 phys_start: CONFIG_SYS_PCI1_IO_PHYS, 166 size: CONFIG_SYS_PCI1_IO_SIZE, 167 flags: PCI_REGION_IO 168 } 169 }; 170 171 void pci_init_board(void) 172 { 173 volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; 174 volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; 175 volatile law83xx_t *pci_law = immr->sysconf.pcilaw; 176 struct pci_region *reg[] = { pci_regions }; 177 178 /* Enable all 3 PCI_CLK_OUTPUTs. */ 179 setbits_be32(&clk->occr, 0xe0000000); 180 181 /* 182 * Configure PCI Local Access Windows 183 */ 184 out_be32(&pci_law[0].bar, CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR); 185 out_be32(&pci_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB); 186 187 out_be32(&pci_law[1].bar, CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR); 188 out_be32(&pci_law[1].ar, LBLAWAR_EN | LBLAWAR_1MB); 189 190 mpc83xx_pci_init(1, reg); 191 } 192 #endif 193 194 #if defined(CONFIG_OF_BOARD_SETUP) 195 int ft_board_setup(void *blob, bd_t *bd) 196 { 197 ft_cpu_setup(blob, bd); 198 #ifdef CONFIG_PCI 199 ft_pci_setup(blob, bd); 200 #endif 201 202 return 0; 203 } 204 #endif 205