xref: /openbmc/u-boot/board/tplink/wdr4300/wdr4300.c (revision 0d159d68)
1 /*
2  * Copyright (C) 2016 Marek Vasut <marex@denx.de>
3  *
4  * SPDX-License-Identifier: GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <asm/io.h>
9 #include <asm/addrspace.h>
10 #include <asm/types.h>
11 #include <mach/ath79.h>
12 #include <mach/ar71xx_regs.h>
13 #include <mach/ddr.h>
14 #include <debug_uart.h>
15 
16 DECLARE_GLOBAL_DATA_PTR;
17 
18 #ifdef CONFIG_USB
19 static void wdr4300_usb_start(void)
20 {
21 	void __iomem *gpio_regs = map_physmem(AR71XX_GPIO_BASE,
22 					      AR71XX_GPIO_SIZE, MAP_NOCACHE);
23 	if (!gpio_regs)
24 		return;
25 
26 	/* Power up the USB HUB. */
27 	clrbits_be32(gpio_regs + AR71XX_GPIO_REG_OE, BIT(21) | BIT(22));
28 	writel(BIT(21) | BIT(22), gpio_regs + AR71XX_GPIO_REG_SET);
29 	mdelay(1);
30 
31 	ath79_usb_reset();
32 }
33 #else
34 static inline void wdr4300_usb_start(void) {}
35 #endif
36 
37 void wdr4300_pinmux_config(void)
38 {
39 	void __iomem *regs;
40 
41 	regs = map_physmem(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE,
42 			   MAP_NOCACHE);
43 
44 	/* Assure JTAG is not disconnected. */
45 	writel(0x40, regs + AR934X_GPIO_REG_FUNC);
46 
47 	/* Configure default GPIO input/output regs. */
48 	writel(0x3031b, regs + AR71XX_GPIO_REG_OE);
49 	writel(0x0f804, regs + AR71XX_GPIO_REG_OUT);
50 
51 	/* Configure pin multiplexing. */
52 	writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC0);
53 	writel(0x0b0a0980, regs + AR934X_GPIO_REG_OUT_FUNC1);
54 	writel(0x00180000, regs + AR934X_GPIO_REG_OUT_FUNC2);
55 	writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC3);
56 	writel(0x0000004d, regs + AR934X_GPIO_REG_OUT_FUNC4);
57 	writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC5);
58 }
59 
60 #ifdef CONFIG_DEBUG_UART_BOARD_INIT
61 void board_debug_uart_init(void)
62 {
63 	wdr4300_pinmux_config();
64 }
65 #endif
66 
67 #ifdef CONFIG_BOARD_EARLY_INIT_F
68 int board_early_init_f(void)
69 {
70 #ifndef CONFIG_DEBUG_UART_BOARD_INIT
71 	wdr4300_pinmux_config();
72 #endif
73 
74 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
75 	ar934x_pll_init(560, 480, 240);
76 	ar934x_ddr_init(560, 480, 240);
77 #endif
78 
79 	wdr4300_usb_start();
80 	ath79_eth_reset();
81 
82 	return 0;
83 }
84 #endif
85