1 /* 2 * Copyright 2015 Toradex, Inc. 3 * 4 * Based on vf610twr.c: 5 * Copyright 2013 Freescale Semiconductor, Inc. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include <common.h> 11 #include <asm/io.h> 12 #include <asm/arch/imx-regs.h> 13 #include <asm/arch/iomux-vf610.h> 14 #include <asm/arch/ddrmc-vf610.h> 15 #include <asm/arch/crm_regs.h> 16 #include <asm/arch/clock.h> 17 #include <mmc.h> 18 #include <fdt_support.h> 19 #include <fsl_esdhc.h> 20 #include <fsl_dcu_fb.h> 21 #include <jffs2/load_kernel.h> 22 #include <miiphy.h> 23 #include <mtd_node.h> 24 #include <netdev.h> 25 #include <i2c.h> 26 #include <g_dnl.h> 27 #include <asm/gpio.h> 28 #include <usb.h> 29 #include "../common/tdx-common.h" 30 31 DECLARE_GLOBAL_DATA_PTR; 32 33 #define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ 34 PAD_CTL_DSE_25ohm | PAD_CTL_OBE_IBE_ENABLE) 35 36 #define ESDHC_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH | \ 37 PAD_CTL_DSE_20ohm | PAD_CTL_OBE_IBE_ENABLE) 38 39 #define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \ 40 PAD_CTL_DSE_50ohm | PAD_CTL_OBE_IBE_ENABLE) 41 42 #define USB_PEN_GPIO 83 43 #define USB_CDET_GPIO 102 44 45 static struct ddrmc_cr_setting colibri_vf_cr_settings[] = { 46 /* levelling */ 47 { DDRMC_CR97_WRLVL_EN, 97 }, 48 { DDRMC_CR98_WRLVL_DL_0(0), 98 }, 49 { DDRMC_CR99_WRLVL_DL_1(0), 99 }, 50 { DDRMC_CR102_RDLVL_REG_EN | DDRMC_CR102_RDLVL_GT_REGEN, 102 }, 51 { DDRMC_CR105_RDLVL_DL_0(0), 105 }, 52 { DDRMC_CR106_RDLVL_GTDL_0(4), 106 }, 53 { DDRMC_CR110_RDLVL_DL_1(0) | DDRMC_CR110_RDLVL_GTDL_1(4), 110 }, 54 /* AXI */ 55 { DDRMC_CR117_AXI0_W_PRI(0) | DDRMC_CR117_AXI0_R_PRI(0), 117 }, 56 { DDRMC_CR118_AXI1_W_PRI(1) | DDRMC_CR118_AXI1_R_PRI(1), 118 }, 57 { DDRMC_CR120_AXI0_PRI1_RPRI(2) | 58 DDRMC_CR120_AXI0_PRI0_RPRI(2), 120 }, 59 { DDRMC_CR121_AXI0_PRI3_RPRI(2) | 60 DDRMC_CR121_AXI0_PRI2_RPRI(2), 121 }, 61 { DDRMC_CR122_AXI1_PRI1_RPRI(1) | DDRMC_CR122_AXI1_PRI0_RPRI(1) | 62 DDRMC_CR122_AXI0_PRIRLX(100), 122 }, 63 { DDRMC_CR123_AXI1_P_ODR_EN | DDRMC_CR123_AXI1_PRI3_RPRI(1) | 64 DDRMC_CR123_AXI1_PRI2_RPRI(1), 123 }, 65 { DDRMC_CR124_AXI1_PRIRLX(100), 124 }, 66 { DDRMC_CR126_PHY_RDLAT(8), 126 }, 67 { DDRMC_CR132_WRLAT_ADJ(5) | 68 DDRMC_CR132_RDLAT_ADJ(6), 132 }, 69 { DDRMC_CR137_PHYCTL_DL(2), 137 }, 70 { DDRMC_CR138_PHY_WRLV_MXDL(256) | 71 DDRMC_CR138_PHYDRAM_CK_EN(1), 138 }, 72 { DDRMC_CR139_PHY_WRLV_RESPLAT(4) | DDRMC_CR139_PHY_WRLV_LOAD(7) | 73 DDRMC_CR139_PHY_WRLV_DLL(3) | 74 DDRMC_CR139_PHY_WRLV_EN(3), 139 }, 75 { DDRMC_CR140_PHY_WRLV_WW(64), 140 }, 76 { DDRMC_CR143_RDLV_GAT_MXDL(1536) | 77 DDRMC_CR143_RDLV_MXDL(128), 143 }, 78 { DDRMC_CR144_PHY_RDLVL_RES(4) | DDRMC_CR144_PHY_RDLV_LOAD(7) | 79 DDRMC_CR144_PHY_RDLV_DLL(3) | 80 DDRMC_CR144_PHY_RDLV_EN(3), 144 }, 81 { DDRMC_CR145_PHY_RDLV_RR(64), 145 }, 82 { DDRMC_CR146_PHY_RDLVL_RESP(64), 146 }, 83 { DDRMC_CR147_RDLV_RESP_MASK(983040), 147 }, 84 { DDRMC_CR148_RDLV_GATE_RESP_MASK(983040), 148 }, 85 { DDRMC_CR151_RDLV_GAT_DQ_ZERO_CNT(1) | 86 DDRMC_CR151_RDLVL_DQ_ZERO_CNT(1), 151 }, 87 88 { DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(13) | 89 DDRMC_CR154_PAD_ZQ_MODE(1) | 90 DDRMC_CR154_DDR_SEL_PAD_CONTR(3) | 91 DDRMC_CR154_PAD_ZQ_HW_FOR(1), 154 }, 92 { DDRMC_CR155_PAD_ODT_BYTE1(1) | DDRMC_CR155_PAD_ODT_BYTE0(1), 155 }, 93 { DDRMC_CR158_TWR(6), 158 }, 94 { DDRMC_CR161_ODT_EN(1) | DDRMC_CR161_TODTH_RD(2) | 95 DDRMC_CR161_TODTH_WR(2), 161 }, 96 /* end marker */ 97 { 0, -1 } 98 }; 99 100 static const iomux_v3_cfg_t usb_pads[] = { 101 VF610_PAD_PTD4__GPIO_83, 102 VF610_PAD_PTC29__GPIO_102, 103 }; 104 105 int dram_init(void) 106 { 107 static const struct ddr3_jedec_timings timings = { 108 .tinit = 5, 109 .trst_pwron = 80000, 110 .cke_inactive = 200000, 111 .wrlat = 5, 112 .caslat_lin = 12, 113 .trc = 21, 114 .trrd = 4, 115 .tccd = 4, 116 .tbst_int_interval = 0, 117 .tfaw = 20, 118 .trp = 6, 119 .twtr = 4, 120 .tras_min = 15, 121 .tmrd = 4, 122 .trtp = 4, 123 .tras_max = 28080, 124 .tmod = 12, 125 .tckesr = 4, 126 .tcke = 3, 127 .trcd_int = 6, 128 .tras_lockout = 0, 129 .tdal = 12, 130 .bstlen = 3, 131 .tdll = 512, 132 .trp_ab = 6, 133 .tref = 3120, 134 .trfc = 64, 135 .tref_int = 0, 136 .tpdex = 3, 137 .txpdll = 10, 138 .txsnr = 48, 139 .txsr = 468, 140 .cksrx = 5, 141 .cksre = 5, 142 .freq_chg_en = 0, 143 .zqcl = 256, 144 .zqinit = 512, 145 .zqcs = 64, 146 .ref_per_zq = 64, 147 .zqcs_rotate = 0, 148 .aprebit = 10, 149 .cmd_age_cnt = 64, 150 .age_cnt = 64, 151 .q_fullness = 7, 152 .odt_rd_mapcs0 = 0, 153 .odt_wr_mapcs0 = 1, 154 .wlmrd = 40, 155 .wldqsen = 25, 156 }; 157 158 ddrmc_setup_iomux(NULL, 0); 159 160 ddrmc_ctrl_init_ddr3(&timings, colibri_vf_cr_settings, NULL, 1, 2); 161 gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); 162 163 return 0; 164 } 165 166 static void setup_iomux_uart(void) 167 { 168 static const iomux_v3_cfg_t uart_pads[] = { 169 NEW_PAD_CTRL(VF610_PAD_PTB4__UART1_TX, UART_PAD_CTRL), 170 NEW_PAD_CTRL(VF610_PAD_PTB5__UART1_RX, UART_PAD_CTRL), 171 NEW_PAD_CTRL(VF610_PAD_PTB10__UART0_TX, UART_PAD_CTRL), 172 NEW_PAD_CTRL(VF610_PAD_PTB11__UART0_RX, UART_PAD_CTRL), 173 }; 174 175 imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); 176 } 177 178 static void setup_iomux_enet(void) 179 { 180 static const iomux_v3_cfg_t enet0_pads[] = { 181 NEW_PAD_CTRL(VF610_PAD_PTA6__RMII0_CLKOUT, ENET_PAD_CTRL), 182 NEW_PAD_CTRL(VF610_PAD_PTC10__RMII1_MDIO, ENET_PAD_CTRL), 183 NEW_PAD_CTRL(VF610_PAD_PTC9__RMII1_MDC, ENET_PAD_CTRL), 184 NEW_PAD_CTRL(VF610_PAD_PTC11__RMII1_CRS_DV, ENET_PAD_CTRL), 185 NEW_PAD_CTRL(VF610_PAD_PTC12__RMII1_RD1, ENET_PAD_CTRL), 186 NEW_PAD_CTRL(VF610_PAD_PTC13__RMII1_RD0, ENET_PAD_CTRL), 187 NEW_PAD_CTRL(VF610_PAD_PTC14__RMII1_RXER, ENET_PAD_CTRL), 188 NEW_PAD_CTRL(VF610_PAD_PTC15__RMII1_TD1, ENET_PAD_CTRL), 189 NEW_PAD_CTRL(VF610_PAD_PTC16__RMII1_TD0, ENET_PAD_CTRL), 190 NEW_PAD_CTRL(VF610_PAD_PTC17__RMII1_TXEN, ENET_PAD_CTRL), 191 }; 192 193 imx_iomux_v3_setup_multiple_pads(enet0_pads, ARRAY_SIZE(enet0_pads)); 194 } 195 196 static void setup_iomux_i2c(void) 197 { 198 static const iomux_v3_cfg_t i2c0_pads[] = { 199 VF610_PAD_PTB14__I2C0_SCL, 200 VF610_PAD_PTB15__I2C0_SDA, 201 }; 202 203 imx_iomux_v3_setup_multiple_pads(i2c0_pads, ARRAY_SIZE(i2c0_pads)); 204 } 205 206 #ifdef CONFIG_NAND_VF610_NFC 207 static void setup_iomux_nfc(void) 208 { 209 static const iomux_v3_cfg_t nfc_pads[] = { 210 VF610_PAD_PTD23__NF_IO7, 211 VF610_PAD_PTD22__NF_IO6, 212 VF610_PAD_PTD21__NF_IO5, 213 VF610_PAD_PTD20__NF_IO4, 214 VF610_PAD_PTD19__NF_IO3, 215 VF610_PAD_PTD18__NF_IO2, 216 VF610_PAD_PTD17__NF_IO1, 217 VF610_PAD_PTD16__NF_IO0, 218 VF610_PAD_PTB24__NF_WE_B, 219 VF610_PAD_PTB25__NF_CE0_B, 220 VF610_PAD_PTB27__NF_RE_B, 221 VF610_PAD_PTC26__NF_RB_B, 222 VF610_PAD_PTC27__NF_ALE, 223 VF610_PAD_PTC28__NF_CLE 224 }; 225 226 imx_iomux_v3_setup_multiple_pads(nfc_pads, ARRAY_SIZE(nfc_pads)); 227 } 228 #endif 229 230 #ifdef CONFIG_FSL_DSPI 231 static void setup_iomux_dspi(void) 232 { 233 static const iomux_v3_cfg_t dspi1_pads[] = { 234 VF610_PAD_PTD5__DSPI1_CS0, 235 VF610_PAD_PTD6__DSPI1_SIN, 236 VF610_PAD_PTD7__DSPI1_SOUT, 237 VF610_PAD_PTD8__DSPI1_SCK, 238 }; 239 240 imx_iomux_v3_setup_multiple_pads(dspi1_pads, ARRAY_SIZE(dspi1_pads)); 241 } 242 #endif 243 244 #ifdef CONFIG_VYBRID_GPIO 245 static void setup_iomux_gpio(void) 246 { 247 static const iomux_v3_cfg_t gpio_pads[] = { 248 VF610_PAD_PTA17__GPIO_7, 249 VF610_PAD_PTA20__GPIO_10, 250 VF610_PAD_PTA21__GPIO_11, 251 VF610_PAD_PTA30__GPIO_20, 252 VF610_PAD_PTA31__GPIO_21, 253 VF610_PAD_PTB0__GPIO_22, 254 VF610_PAD_PTB1__GPIO_23, 255 VF610_PAD_PTB6__GPIO_28, 256 VF610_PAD_PTB7__GPIO_29, 257 VF610_PAD_PTB8__GPIO_30, 258 VF610_PAD_PTB9__GPIO_31, 259 VF610_PAD_PTB12__GPIO_34, 260 VF610_PAD_PTB13__GPIO_35, 261 VF610_PAD_PTB16__GPIO_38, 262 VF610_PAD_PTB17__GPIO_39, 263 VF610_PAD_PTB18__GPIO_40, 264 VF610_PAD_PTB21__GPIO_43, 265 VF610_PAD_PTB22__GPIO_44, 266 VF610_PAD_PTC0__GPIO_45, 267 VF610_PAD_PTC1__GPIO_46, 268 VF610_PAD_PTC2__GPIO_47, 269 VF610_PAD_PTC3__GPIO_48, 270 VF610_PAD_PTC4__GPIO_49, 271 VF610_PAD_PTC5__GPIO_50, 272 VF610_PAD_PTC6__GPIO_51, 273 VF610_PAD_PTC7__GPIO_52, 274 VF610_PAD_PTC8__GPIO_53, 275 VF610_PAD_PTD31__GPIO_63, 276 VF610_PAD_PTD30__GPIO_64, 277 VF610_PAD_PTD29__GPIO_65, 278 VF610_PAD_PTD28__GPIO_66, 279 VF610_PAD_PTD27__GPIO_67, 280 VF610_PAD_PTD26__GPIO_68, 281 VF610_PAD_PTD25__GPIO_69, 282 VF610_PAD_PTD24__GPIO_70, 283 VF610_PAD_PTD9__GPIO_88, 284 VF610_PAD_PTD10__GPIO_89, 285 VF610_PAD_PTD11__GPIO_90, 286 VF610_PAD_PTD12__GPIO_91, 287 VF610_PAD_PTD13__GPIO_92, 288 VF610_PAD_PTB23__GPIO_93, 289 VF610_PAD_PTB26__GPIO_96, 290 VF610_PAD_PTB28__GPIO_98, 291 VF610_PAD_PTC30__GPIO_103, 292 VF610_PAD_PTA7__GPIO_134, 293 }; 294 295 imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads)); 296 } 297 #endif 298 299 #ifdef CONFIG_VIDEO_FSL_DCU_FB 300 static void setup_iomux_fsl_dcu(void) 301 { 302 static const iomux_v3_cfg_t dcu0_pads[] = { 303 VF610_PAD_PTE0__DCU0_HSYNC, 304 VF610_PAD_PTE1__DCU0_VSYNC, 305 VF610_PAD_PTE2__DCU0_PCLK, 306 VF610_PAD_PTE4__DCU0_DE, 307 VF610_PAD_PTE5__DCU0_R0, 308 VF610_PAD_PTE6__DCU0_R1, 309 VF610_PAD_PTE7__DCU0_R2, 310 VF610_PAD_PTE8__DCU0_R3, 311 VF610_PAD_PTE9__DCU0_R4, 312 VF610_PAD_PTE10__DCU0_R5, 313 VF610_PAD_PTE11__DCU0_R6, 314 VF610_PAD_PTE12__DCU0_R7, 315 VF610_PAD_PTE13__DCU0_G0, 316 VF610_PAD_PTE14__DCU0_G1, 317 VF610_PAD_PTE15__DCU0_G2, 318 VF610_PAD_PTE16__DCU0_G3, 319 VF610_PAD_PTE17__DCU0_G4, 320 VF610_PAD_PTE18__DCU0_G5, 321 VF610_PAD_PTE19__DCU0_G6, 322 VF610_PAD_PTE20__DCU0_G7, 323 VF610_PAD_PTE21__DCU0_B0, 324 VF610_PAD_PTE22__DCU0_B1, 325 VF610_PAD_PTE23__DCU0_B2, 326 VF610_PAD_PTE24__DCU0_B3, 327 VF610_PAD_PTE25__DCU0_B4, 328 VF610_PAD_PTE26__DCU0_B5, 329 VF610_PAD_PTE27__DCU0_B6, 330 VF610_PAD_PTE28__DCU0_B7, 331 }; 332 333 imx_iomux_v3_setup_multiple_pads(dcu0_pads, ARRAY_SIZE(dcu0_pads)); 334 } 335 336 static void setup_tcon(void) 337 { 338 setbits_le32(TCON0_BASE_ADDR, (1 << 29)); 339 } 340 #endif 341 342 #ifdef CONFIG_FSL_ESDHC 343 struct fsl_esdhc_cfg esdhc_cfg[1] = { 344 {ESDHC1_BASE_ADDR}, 345 }; 346 347 int board_mmc_getcd(struct mmc *mmc) 348 { 349 /* eSDHC1 is always present */ 350 return 1; 351 } 352 353 int board_mmc_init(bd_t *bis) 354 { 355 static const iomux_v3_cfg_t esdhc1_pads[] = { 356 NEW_PAD_CTRL(VF610_PAD_PTA24__ESDHC1_CLK, ESDHC_PAD_CTRL), 357 NEW_PAD_CTRL(VF610_PAD_PTA25__ESDHC1_CMD, ESDHC_PAD_CTRL), 358 NEW_PAD_CTRL(VF610_PAD_PTA26__ESDHC1_DAT0, ESDHC_PAD_CTRL), 359 NEW_PAD_CTRL(VF610_PAD_PTA27__ESDHC1_DAT1, ESDHC_PAD_CTRL), 360 NEW_PAD_CTRL(VF610_PAD_PTA28__ESDHC1_DAT2, ESDHC_PAD_CTRL), 361 NEW_PAD_CTRL(VF610_PAD_PTA29__ESDHC1_DAT3, ESDHC_PAD_CTRL), 362 }; 363 364 esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); 365 366 imx_iomux_v3_setup_multiple_pads( 367 esdhc1_pads, ARRAY_SIZE(esdhc1_pads)); 368 369 return fsl_esdhc_initialize(bis, &esdhc_cfg[0]); 370 } 371 #endif 372 373 static inline int is_colibri_vf61(void) 374 { 375 struct mscm *mscm = (struct mscm *)MSCM_BASE_ADDR; 376 377 /* 378 * Detect board type by Level 2 Cache: VF50 don't have any 379 * Level 2 Cache. 380 */ 381 return !!mscm->cpxcfg1; 382 } 383 384 static void clock_init(void) 385 { 386 struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; 387 struct anadig_reg *anadig = (struct anadig_reg *)ANADIG_BASE_ADDR; 388 u32 pfd_clk_sel, ddr_clk_sel; 389 390 clrsetbits_le32(&ccm->ccgr0, CCM_REG_CTRL_MASK, 391 CCM_CCGR0_UART0_CTRL_MASK); 392 #ifdef CONFIG_FSL_DSPI 393 setbits_le32(&ccm->ccgr0, CCM_CCGR0_DSPI1_CTRL_MASK); 394 #endif 395 clrsetbits_le32(&ccm->ccgr1, CCM_REG_CTRL_MASK, 396 CCM_CCGR1_PIT_CTRL_MASK | CCM_CCGR1_WDOGA5_CTRL_MASK); 397 clrsetbits_le32(&ccm->ccgr2, CCM_REG_CTRL_MASK, 398 CCM_CCGR2_IOMUXC_CTRL_MASK | CCM_CCGR2_PORTA_CTRL_MASK | 399 CCM_CCGR2_PORTB_CTRL_MASK | CCM_CCGR2_PORTC_CTRL_MASK | 400 CCM_CCGR2_PORTD_CTRL_MASK | CCM_CCGR2_PORTE_CTRL_MASK); 401 clrsetbits_le32(&ccm->ccgr3, CCM_REG_CTRL_MASK, 402 CCM_CCGR3_ANADIG_CTRL_MASK | CCM_CCGR3_SCSC_CTRL_MASK); 403 clrsetbits_le32(&ccm->ccgr4, CCM_REG_CTRL_MASK, 404 CCM_CCGR4_WKUP_CTRL_MASK | CCM_CCGR4_CCM_CTRL_MASK | 405 CCM_CCGR4_GPC_CTRL_MASK | CCM_CCGR4_I2C0_CTRL_MASK); 406 clrsetbits_le32(&ccm->ccgr6, CCM_REG_CTRL_MASK, 407 CCM_CCGR6_OCOTP_CTRL_MASK | CCM_CCGR6_DDRMC_CTRL_MASK); 408 clrsetbits_le32(&ccm->ccgr7, CCM_REG_CTRL_MASK, 409 CCM_CCGR7_SDHC1_CTRL_MASK); 410 clrsetbits_le32(&ccm->ccgr9, CCM_REG_CTRL_MASK, 411 CCM_CCGR9_FEC0_CTRL_MASK | CCM_CCGR9_FEC1_CTRL_MASK); 412 clrsetbits_le32(&ccm->ccgr10, CCM_REG_CTRL_MASK, 413 CCM_CCGR10_NFC_CTRL_MASK); 414 415 #ifdef CONFIG_USB_EHCI_VF 416 setbits_le32(&ccm->ccgr1, CCM_CCGR1_USBC0_CTRL_MASK); 417 setbits_le32(&ccm->ccgr7, CCM_CCGR7_USBC1_CTRL_MASK); 418 419 clrsetbits_le32(&anadig->pll3_ctrl, ANADIG_PLL3_CTRL_BYPASS | 420 ANADIG_PLL3_CTRL_POWERDOWN | 421 ANADIG_PLL3_CTRL_DIV_SELECT, 422 ANADIG_PLL3_CTRL_ENABLE); 423 clrsetbits_le32(&anadig->pll7_ctrl, ANADIG_PLL7_CTRL_BYPASS | 424 ANADIG_PLL7_CTRL_POWERDOWN | 425 ANADIG_PLL7_CTRL_DIV_SELECT, 426 ANADIG_PLL7_CTRL_ENABLE); 427 #endif 428 429 clrsetbits_le32(&anadig->pll5_ctrl, ANADIG_PLL5_CTRL_BYPASS | 430 ANADIG_PLL5_CTRL_POWERDOWN, ANADIG_PLL5_CTRL_ENABLE | 431 ANADIG_PLL5_CTRL_DIV_SELECT); 432 433 if (is_colibri_vf61()) { 434 clrsetbits_le32(&anadig->pll2_ctrl, ANADIG_PLL5_CTRL_BYPASS | 435 ANADIG_PLL2_CTRL_POWERDOWN, 436 ANADIG_PLL2_CTRL_ENABLE | 437 ANADIG_PLL2_CTRL_DIV_SELECT); 438 } 439 440 clrsetbits_le32(&anadig->pll1_ctrl, ANADIG_PLL1_CTRL_POWERDOWN, 441 ANADIG_PLL1_CTRL_ENABLE | ANADIG_PLL1_CTRL_DIV_SELECT); 442 443 clrsetbits_le32(&ccm->ccr, CCM_CCR_OSCNT_MASK, 444 CCM_CCR_FIRC_EN | CCM_CCR_OSCNT(5)); 445 446 /* See "Typical PLL Configuration" */ 447 if (is_colibri_vf61()) { 448 pfd_clk_sel = CCM_CCSR_PLL1_PFD_CLK_SEL(1); 449 ddr_clk_sel = CCM_CCSR_DDRC_CLK_SEL(0); 450 } else { 451 pfd_clk_sel = CCM_CCSR_PLL1_PFD_CLK_SEL(3); 452 ddr_clk_sel = CCM_CCSR_DDRC_CLK_SEL(1); 453 } 454 455 clrsetbits_le32(&ccm->ccsr, CCM_REG_CTRL_MASK, pfd_clk_sel | 456 CCM_CCSR_PLL2_PFD4_EN | CCM_CCSR_PLL2_PFD3_EN | 457 CCM_CCSR_PLL2_PFD2_EN | CCM_CCSR_PLL2_PFD1_EN | 458 CCM_CCSR_PLL1_PFD4_EN | CCM_CCSR_PLL1_PFD3_EN | 459 CCM_CCSR_PLL1_PFD2_EN | CCM_CCSR_PLL1_PFD1_EN | 460 ddr_clk_sel | CCM_CCSR_FAST_CLK_SEL(1) | 461 CCM_CCSR_SYS_CLK_SEL(4)); 462 463 clrsetbits_le32(&ccm->cacrr, CCM_REG_CTRL_MASK, 464 CCM_CACRR_IPG_CLK_DIV(1) | CCM_CACRR_BUS_CLK_DIV(2) | 465 CCM_CACRR_ARM_CLK_DIV(0)); 466 clrsetbits_le32(&ccm->cscmr1, CCM_REG_CTRL_MASK, 467 CCM_CSCMR1_ESDHC1_CLK_SEL(3) | 468 CCM_CSCMR1_NFC_CLK_SEL(0)); 469 clrsetbits_le32(&ccm->cscdr1, CCM_REG_CTRL_MASK, 470 CCM_CSCDR1_RMII_CLK_EN); 471 clrsetbits_le32(&ccm->cscdr2, CCM_REG_CTRL_MASK, 472 CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0) | 473 CCM_CSCDR2_NFC_EN); 474 clrsetbits_le32(&ccm->cscdr3, CCM_REG_CTRL_MASK, 475 CCM_CSCDR3_NFC_PRE_DIV(3)); 476 clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK, 477 CCM_CSCMR2_RMII_CLK_SEL(2)); 478 479 #ifdef CONFIG_VIDEO_FSL_DCU_FB 480 setbits_le32(&ccm->ccgr1, CCM_CCGR1_TCON0_CTRL_MASK); 481 setbits_le32(&ccm->ccgr3, CCM_CCGR3_DCU0_CTRL_MASK); 482 #endif 483 } 484 485 static void mscm_init(void) 486 { 487 struct mscm_ir *mscmir = (struct mscm_ir *)MSCM_IR_BASE_ADDR; 488 int i; 489 490 for (i = 0; i < MSCM_IRSPRC_NUM; i++) 491 writew(MSCM_IRSPRC_CP0_EN, &mscmir->irsprc[i]); 492 } 493 494 int board_phy_config(struct phy_device *phydev) 495 { 496 if (phydev->drv->config) 497 phydev->drv->config(phydev); 498 499 return 0; 500 } 501 502 int board_early_init_f(void) 503 { 504 clock_init(); 505 mscm_init(); 506 507 setup_iomux_uart(); 508 setup_iomux_enet(); 509 setup_iomux_i2c(); 510 #ifdef CONFIG_NAND_VF610_NFC 511 setup_iomux_nfc(); 512 #endif 513 514 #ifdef CONFIG_VYBRID_GPIO 515 setup_iomux_gpio(); 516 #endif 517 518 #ifdef CONFIG_FSL_DSPI 519 setup_iomux_dspi(); 520 #endif 521 522 #ifdef CONFIG_VIDEO_FSL_DCU_FB 523 setup_tcon(); 524 setup_iomux_fsl_dcu(); 525 #endif 526 527 return 0; 528 } 529 530 #ifdef CONFIG_BOARD_LATE_INIT 531 int board_late_init(void) 532 { 533 struct src *src = (struct src *)SRC_BASE_ADDR; 534 535 if (((src->sbmr2 & SRC_SBMR2_BMOD_MASK) >> SRC_SBMR2_BMOD_SHIFT) 536 == SRC_SBMR2_BMOD_SERIAL) { 537 printf("Serial Downloader recovery mode, disable autoboot\n"); 538 env_set("bootdelay", "-1"); 539 } 540 541 return 0; 542 } 543 #endif /* CONFIG_BOARD_LATE_INIT */ 544 545 int board_init(void) 546 { 547 struct scsc_reg *scsc = (struct scsc_reg *)SCSC_BASE_ADDR; 548 549 /* address of boot parameters */ 550 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 551 552 /* 553 * Enable external 32K Oscillator 554 * 555 * The internal clock experiences significant drift 556 * so we must use the external oscillator in order 557 * to maintain correct time in the hwclock 558 */ 559 560 setbits_le32(&scsc->sosc_ctr, SCSC_SOSC_CTR_SOSC_EN); 561 562 #ifdef CONFIG_USB_EHCI_VF 563 gpio_request(USB_CDET_GPIO, "usb-cdet-gpio"); 564 #endif 565 566 return 0; 567 } 568 569 int checkboard(void) 570 { 571 if (is_colibri_vf61()) 572 puts("Board: Colibri VF61\n"); 573 else 574 puts("Board: Colibri VF50\n"); 575 576 return 0; 577 } 578 579 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) 580 int ft_board_setup(void *blob, bd_t *bd) 581 { 582 int ret = 0; 583 #ifdef CONFIG_FDT_FIXUP_PARTITIONS 584 static struct node_info nodes[] = { 585 { "fsl,vf610-nfc", MTD_DEV_TYPE_NAND, }, /* NAND flash */ 586 }; 587 588 /* Update partition nodes using info from mtdparts env var */ 589 puts(" Updating MTD partitions...\n"); 590 fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); 591 #endif 592 #ifdef CONFIG_VIDEO_FSL_DCU_FB 593 ret = fsl_dcu_fixedfb_setup(blob); 594 if (ret) 595 return ret; 596 #endif 597 598 return ft_common_board_setup(blob, bd); 599 } 600 #endif 601 602 #ifdef CONFIG_USB_EHCI_VF 603 int board_ehci_hcd_init(int port) 604 { 605 imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads)); 606 607 switch (port) { 608 case 0: 609 /* USBC does not have PEN, also configured as USB client only */ 610 break; 611 case 1: 612 gpio_request(USB_PEN_GPIO, "usb-pen-gpio"); 613 gpio_direction_output(USB_PEN_GPIO, 0); 614 break; 615 } 616 return 0; 617 } 618 619 int board_usb_phy_mode(int port) 620 { 621 switch (port) { 622 case 0: 623 /* 624 * Port 0 is used only in client mode on Colibri Vybrid modules 625 * Check for state of USB client gpio pin and accordingly return 626 * USB_INIT_DEVICE or USB_INIT_HOST. 627 */ 628 if (gpio_get_value(USB_CDET_GPIO)) 629 return USB_INIT_DEVICE; 630 else 631 return USB_INIT_HOST; 632 case 1: 633 /* Port 1 is used only in host mode on Colibri Vybrid modules */ 634 return USB_INIT_HOST; 635 default: 636 /* 637 * There are only two USB controllers on Vybrid. Ideally we will 638 * not reach here. However return USB_INIT_HOST if we do. 639 */ 640 return USB_INIT_HOST; 641 } 642 } 643 #endif 644