1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright 2015 Toradex, Inc.
4  *
5  * Based on vf610twr.c:
6  * Copyright 2013 Freescale Semiconductor, Inc.
7  */
8 
9 #include <common.h>
10 #include <asm/io.h>
11 #include <asm/arch/imx-regs.h>
12 #include <asm/arch/iomux-vf610.h>
13 #include <asm/arch/ddrmc-vf610.h>
14 #include <asm/arch/crm_regs.h>
15 #include <asm/arch/clock.h>
16 #include <mmc.h>
17 #include <fdt_support.h>
18 #include <fsl_esdhc.h>
19 #include <fsl_dcu_fb.h>
20 #include <jffs2/load_kernel.h>
21 #include <miiphy.h>
22 #include <mtd_node.h>
23 #include <netdev.h>
24 #include <i2c.h>
25 #include <g_dnl.h>
26 #include <asm/gpio.h>
27 #include <usb.h>
28 #include "../common/tdx-common.h"
29 
30 DECLARE_GLOBAL_DATA_PTR;
31 
32 #define UART_PAD_CTRL	(PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
33 			PAD_CTL_DSE_25ohm | PAD_CTL_OBE_IBE_ENABLE)
34 
35 #define ESDHC_PAD_CTRL	(PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH | \
36 			PAD_CTL_DSE_20ohm | PAD_CTL_OBE_IBE_ENABLE)
37 
38 #define ENET_PAD_CTRL	(PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \
39 			PAD_CTL_DSE_50ohm | PAD_CTL_OBE_IBE_ENABLE)
40 
41 #define USB_PEN_GPIO           83
42 #define USB_CDET_GPIO		102
43 
44 static struct ddrmc_cr_setting colibri_vf_cr_settings[] = {
45 	/* levelling */
46 	{ DDRMC_CR97_WRLVL_EN, 97 },
47 	{ DDRMC_CR98_WRLVL_DL_0(0), 98 },
48 	{ DDRMC_CR99_WRLVL_DL_1(0), 99 },
49 	{ DDRMC_CR102_RDLVL_REG_EN | DDRMC_CR102_RDLVL_GT_REGEN, 102 },
50 	{ DDRMC_CR105_RDLVL_DL_0(0), 105 },
51 	{ DDRMC_CR106_RDLVL_GTDL_0(4), 106 },
52 	{ DDRMC_CR110_RDLVL_DL_1(0) | DDRMC_CR110_RDLVL_GTDL_1(4), 110 },
53 	/* AXI */
54 	{ DDRMC_CR117_AXI0_W_PRI(0) | DDRMC_CR117_AXI0_R_PRI(0), 117 },
55 	{ DDRMC_CR118_AXI1_W_PRI(1) | DDRMC_CR118_AXI1_R_PRI(1), 118 },
56 	{ DDRMC_CR120_AXI0_PRI1_RPRI(2) |
57 		   DDRMC_CR120_AXI0_PRI0_RPRI(2), 120 },
58 	{ DDRMC_CR121_AXI0_PRI3_RPRI(2) |
59 		   DDRMC_CR121_AXI0_PRI2_RPRI(2), 121 },
60 	{ DDRMC_CR122_AXI1_PRI1_RPRI(1) | DDRMC_CR122_AXI1_PRI0_RPRI(1) |
61 		   DDRMC_CR122_AXI0_PRIRLX(100), 122 },
62 	{ DDRMC_CR123_AXI1_P_ODR_EN | DDRMC_CR123_AXI1_PRI3_RPRI(1) |
63 		   DDRMC_CR123_AXI1_PRI2_RPRI(1), 123 },
64 	{ DDRMC_CR124_AXI1_PRIRLX(100), 124 },
65 	{ DDRMC_CR126_PHY_RDLAT(8), 126 },
66 	{ DDRMC_CR132_WRLAT_ADJ(5) |
67 		   DDRMC_CR132_RDLAT_ADJ(6), 132 },
68 	{ DDRMC_CR137_PHYCTL_DL(2), 137 },
69 	{ DDRMC_CR138_PHY_WRLV_MXDL(256) |
70 		   DDRMC_CR138_PHYDRAM_CK_EN(1), 138 },
71 	{ DDRMC_CR139_PHY_WRLV_RESPLAT(4) | DDRMC_CR139_PHY_WRLV_LOAD(7) |
72 		   DDRMC_CR139_PHY_WRLV_DLL(3) |
73 		   DDRMC_CR139_PHY_WRLV_EN(3), 139 },
74 	{ DDRMC_CR140_PHY_WRLV_WW(64), 140 },
75 	{ DDRMC_CR143_RDLV_GAT_MXDL(1536) |
76 		   DDRMC_CR143_RDLV_MXDL(128), 143 },
77 	{ DDRMC_CR144_PHY_RDLVL_RES(4) | DDRMC_CR144_PHY_RDLV_LOAD(7) |
78 		   DDRMC_CR144_PHY_RDLV_DLL(3) |
79 		   DDRMC_CR144_PHY_RDLV_EN(3), 144 },
80 	{ DDRMC_CR145_PHY_RDLV_RR(64), 145 },
81 	{ DDRMC_CR146_PHY_RDLVL_RESP(64), 146 },
82 	{ DDRMC_CR147_RDLV_RESP_MASK(983040), 147 },
83 	{ DDRMC_CR148_RDLV_GATE_RESP_MASK(983040), 148 },
84 	{ DDRMC_CR151_RDLV_GAT_DQ_ZERO_CNT(1) |
85 		   DDRMC_CR151_RDLVL_DQ_ZERO_CNT(1), 151 },
86 
87 	{ DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(13) |
88 		   DDRMC_CR154_PAD_ZQ_MODE(1) |
89 		   DDRMC_CR154_DDR_SEL_PAD_CONTR(3) |
90 		   DDRMC_CR154_PAD_ZQ_HW_FOR(1), 154 },
91 	{ DDRMC_CR155_PAD_ODT_BYTE1(1) | DDRMC_CR155_PAD_ODT_BYTE0(1), 155 },
92 	{ DDRMC_CR158_TWR(6), 158 },
93 	{ DDRMC_CR161_ODT_EN(1) | DDRMC_CR161_TODTH_RD(2) |
94 		   DDRMC_CR161_TODTH_WR(2), 161 },
95 	/* end marker */
96 	{ 0, -1 }
97 };
98 
99 static const iomux_v3_cfg_t usb_pads[] = {
100 	VF610_PAD_PTD4__GPIO_83,
101 	VF610_PAD_PTC29__GPIO_102,
102 };
103 
104 int dram_init(void)
105 {
106 	static const struct ddr3_jedec_timings timings = {
107 		.tinit             = 5,
108 		.trst_pwron        = 80000,
109 		.cke_inactive      = 200000,
110 		.wrlat             = 5,
111 		.caslat_lin        = 12,
112 		.trc               = 21,
113 		.trrd              = 4,
114 		.tccd              = 4,
115 		.tbst_int_interval = 0,
116 		.tfaw              = 20,
117 		.trp               = 6,
118 		.twtr              = 4,
119 		.tras_min          = 15,
120 		.tmrd              = 4,
121 		.trtp              = 4,
122 		.tras_max          = 28080,
123 		.tmod              = 12,
124 		.tckesr            = 4,
125 		.tcke              = 3,
126 		.trcd_int          = 6,
127 		.tras_lockout      = 0,
128 		.tdal              = 12,
129 		.bstlen            = 3,
130 		.tdll              = 512,
131 		.trp_ab            = 6,
132 		.tref              = 3120,
133 		.trfc              = 64,
134 		.tref_int          = 0,
135 		.tpdex             = 3,
136 		.txpdll            = 10,
137 		.txsnr             = 48,
138 		.txsr              = 468,
139 		.cksrx             = 5,
140 		.cksre             = 5,
141 		.freq_chg_en       = 0,
142 		.zqcl              = 256,
143 		.zqinit            = 512,
144 		.zqcs              = 64,
145 		.ref_per_zq        = 64,
146 		.zqcs_rotate       = 0,
147 		.aprebit           = 10,
148 		.cmd_age_cnt       = 64,
149 		.age_cnt           = 64,
150 		.q_fullness        = 7,
151 		.odt_rd_mapcs0     = 0,
152 		.odt_wr_mapcs0     = 1,
153 		.wlmrd             = 40,
154 		.wldqsen           = 25,
155 	};
156 
157 	ddrmc_setup_iomux(NULL, 0);
158 
159 	ddrmc_ctrl_init_ddr3(&timings, colibri_vf_cr_settings, NULL, 1, 2);
160 	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
161 
162 	return 0;
163 }
164 
165 static void setup_iomux_uart(void)
166 {
167 	static const iomux_v3_cfg_t uart_pads[] = {
168 		NEW_PAD_CTRL(VF610_PAD_PTB4__UART1_TX, UART_PAD_CTRL),
169 		NEW_PAD_CTRL(VF610_PAD_PTB5__UART1_RX, UART_PAD_CTRL),
170 		NEW_PAD_CTRL(VF610_PAD_PTB10__UART0_TX, UART_PAD_CTRL),
171 		NEW_PAD_CTRL(VF610_PAD_PTB11__UART0_RX, UART_PAD_CTRL),
172 	};
173 
174 	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
175 }
176 
177 static void setup_iomux_enet(void)
178 {
179 	static const iomux_v3_cfg_t enet0_pads[] = {
180 		NEW_PAD_CTRL(VF610_PAD_PTA6__RMII0_CLKOUT, ENET_PAD_CTRL),
181 		NEW_PAD_CTRL(VF610_PAD_PTC10__RMII1_MDIO, ENET_PAD_CTRL),
182 		NEW_PAD_CTRL(VF610_PAD_PTC9__RMII1_MDC, ENET_PAD_CTRL),
183 		NEW_PAD_CTRL(VF610_PAD_PTC11__RMII1_CRS_DV, ENET_PAD_CTRL),
184 		NEW_PAD_CTRL(VF610_PAD_PTC12__RMII1_RD1, ENET_PAD_CTRL),
185 		NEW_PAD_CTRL(VF610_PAD_PTC13__RMII1_RD0, ENET_PAD_CTRL),
186 		NEW_PAD_CTRL(VF610_PAD_PTC14__RMII1_RXER, ENET_PAD_CTRL),
187 		NEW_PAD_CTRL(VF610_PAD_PTC15__RMII1_TD1, ENET_PAD_CTRL),
188 		NEW_PAD_CTRL(VF610_PAD_PTC16__RMII1_TD0, ENET_PAD_CTRL),
189 		NEW_PAD_CTRL(VF610_PAD_PTC17__RMII1_TXEN, ENET_PAD_CTRL),
190 	};
191 
192 	imx_iomux_v3_setup_multiple_pads(enet0_pads, ARRAY_SIZE(enet0_pads));
193 }
194 
195 static void setup_iomux_i2c(void)
196 {
197 	static const iomux_v3_cfg_t i2c0_pads[] = {
198 		VF610_PAD_PTB14__I2C0_SCL,
199 		VF610_PAD_PTB15__I2C0_SDA,
200 	};
201 
202 	imx_iomux_v3_setup_multiple_pads(i2c0_pads, ARRAY_SIZE(i2c0_pads));
203 }
204 
205 #ifdef CONFIG_NAND_VF610_NFC
206 static void setup_iomux_nfc(void)
207 {
208 	static const iomux_v3_cfg_t nfc_pads[] = {
209 		VF610_PAD_PTD23__NF_IO7,
210 		VF610_PAD_PTD22__NF_IO6,
211 		VF610_PAD_PTD21__NF_IO5,
212 		VF610_PAD_PTD20__NF_IO4,
213 		VF610_PAD_PTD19__NF_IO3,
214 		VF610_PAD_PTD18__NF_IO2,
215 		VF610_PAD_PTD17__NF_IO1,
216 		VF610_PAD_PTD16__NF_IO0,
217 		VF610_PAD_PTB24__NF_WE_B,
218 		VF610_PAD_PTB25__NF_CE0_B,
219 		VF610_PAD_PTB27__NF_RE_B,
220 		VF610_PAD_PTC26__NF_RB_B,
221 		VF610_PAD_PTC27__NF_ALE,
222 		VF610_PAD_PTC28__NF_CLE
223 	};
224 
225 	imx_iomux_v3_setup_multiple_pads(nfc_pads, ARRAY_SIZE(nfc_pads));
226 }
227 #endif
228 
229 #ifdef CONFIG_FSL_DSPI
230 static void setup_iomux_dspi(void)
231 {
232 	static const iomux_v3_cfg_t dspi1_pads[] = {
233 		VF610_PAD_PTD5__DSPI1_CS0,
234 		VF610_PAD_PTD6__DSPI1_SIN,
235 		VF610_PAD_PTD7__DSPI1_SOUT,
236 		VF610_PAD_PTD8__DSPI1_SCK,
237 	};
238 
239 	imx_iomux_v3_setup_multiple_pads(dspi1_pads, ARRAY_SIZE(dspi1_pads));
240 }
241 #endif
242 
243 #ifdef CONFIG_VYBRID_GPIO
244 static void setup_iomux_gpio(void)
245 {
246 	static const iomux_v3_cfg_t gpio_pads[] = {
247 		VF610_PAD_PTA17__GPIO_7,
248 		VF610_PAD_PTA20__GPIO_10,
249 		VF610_PAD_PTA21__GPIO_11,
250 		VF610_PAD_PTA30__GPIO_20,
251 		VF610_PAD_PTA31__GPIO_21,
252 		VF610_PAD_PTB0__GPIO_22,
253 		VF610_PAD_PTB1__GPIO_23,
254 		VF610_PAD_PTB6__GPIO_28,
255 		VF610_PAD_PTB7__GPIO_29,
256 		VF610_PAD_PTB8__GPIO_30,
257 		VF610_PAD_PTB9__GPIO_31,
258 		VF610_PAD_PTB12__GPIO_34,
259 		VF610_PAD_PTB13__GPIO_35,
260 		VF610_PAD_PTB16__GPIO_38,
261 		VF610_PAD_PTB17__GPIO_39,
262 		VF610_PAD_PTB18__GPIO_40,
263 		VF610_PAD_PTB21__GPIO_43,
264 		VF610_PAD_PTB22__GPIO_44,
265 		VF610_PAD_PTC0__GPIO_45,
266 		VF610_PAD_PTC1__GPIO_46,
267 		VF610_PAD_PTC2__GPIO_47,
268 		VF610_PAD_PTC3__GPIO_48,
269 		VF610_PAD_PTC4__GPIO_49,
270 		VF610_PAD_PTC5__GPIO_50,
271 		VF610_PAD_PTC6__GPIO_51,
272 		VF610_PAD_PTC7__GPIO_52,
273 		VF610_PAD_PTC8__GPIO_53,
274 		VF610_PAD_PTD31__GPIO_63,
275 		VF610_PAD_PTD30__GPIO_64,
276 		VF610_PAD_PTD29__GPIO_65,
277 		VF610_PAD_PTD28__GPIO_66,
278 		VF610_PAD_PTD27__GPIO_67,
279 		VF610_PAD_PTD26__GPIO_68,
280 		VF610_PAD_PTD25__GPIO_69,
281 		VF610_PAD_PTD24__GPIO_70,
282 		VF610_PAD_PTD9__GPIO_88,
283 		VF610_PAD_PTD10__GPIO_89,
284 		VF610_PAD_PTD11__GPIO_90,
285 		VF610_PAD_PTD12__GPIO_91,
286 		VF610_PAD_PTD13__GPIO_92,
287 		VF610_PAD_PTB23__GPIO_93,
288 		VF610_PAD_PTB26__GPIO_96,
289 		VF610_PAD_PTB28__GPIO_98,
290 		VF610_PAD_PTC30__GPIO_103,
291 		VF610_PAD_PTA7__GPIO_134,
292 	};
293 
294 	imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
295 }
296 #endif
297 
298 #ifdef CONFIG_VIDEO_FSL_DCU_FB
299 static void setup_iomux_fsl_dcu(void)
300 {
301 	static const iomux_v3_cfg_t dcu0_pads[] = {
302 		VF610_PAD_PTE0__DCU0_HSYNC,
303 		VF610_PAD_PTE1__DCU0_VSYNC,
304 		VF610_PAD_PTE2__DCU0_PCLK,
305 		VF610_PAD_PTE4__DCU0_DE,
306 		VF610_PAD_PTE5__DCU0_R0,
307 		VF610_PAD_PTE6__DCU0_R1,
308 		VF610_PAD_PTE7__DCU0_R2,
309 		VF610_PAD_PTE8__DCU0_R3,
310 		VF610_PAD_PTE9__DCU0_R4,
311 		VF610_PAD_PTE10__DCU0_R5,
312 		VF610_PAD_PTE11__DCU0_R6,
313 		VF610_PAD_PTE12__DCU0_R7,
314 		VF610_PAD_PTE13__DCU0_G0,
315 		VF610_PAD_PTE14__DCU0_G1,
316 		VF610_PAD_PTE15__DCU0_G2,
317 		VF610_PAD_PTE16__DCU0_G3,
318 		VF610_PAD_PTE17__DCU0_G4,
319 		VF610_PAD_PTE18__DCU0_G5,
320 		VF610_PAD_PTE19__DCU0_G6,
321 		VF610_PAD_PTE20__DCU0_G7,
322 		VF610_PAD_PTE21__DCU0_B0,
323 		VF610_PAD_PTE22__DCU0_B1,
324 		VF610_PAD_PTE23__DCU0_B2,
325 		VF610_PAD_PTE24__DCU0_B3,
326 		VF610_PAD_PTE25__DCU0_B4,
327 		VF610_PAD_PTE26__DCU0_B5,
328 		VF610_PAD_PTE27__DCU0_B6,
329 		VF610_PAD_PTE28__DCU0_B7,
330 	};
331 
332 	imx_iomux_v3_setup_multiple_pads(dcu0_pads, ARRAY_SIZE(dcu0_pads));
333 }
334 
335 static void setup_tcon(void)
336 {
337 	setbits_le32(TCON0_BASE_ADDR, (1 << 29));
338 }
339 #endif
340 
341 #ifdef CONFIG_FSL_ESDHC
342 struct fsl_esdhc_cfg esdhc_cfg[1] = {
343 	{ESDHC1_BASE_ADDR},
344 };
345 
346 int board_mmc_getcd(struct mmc *mmc)
347 {
348 	/* eSDHC1 is always present */
349 	return 1;
350 }
351 
352 int board_mmc_init(bd_t *bis)
353 {
354 	static const iomux_v3_cfg_t esdhc1_pads[] = {
355 		NEW_PAD_CTRL(VF610_PAD_PTA24__ESDHC1_CLK, ESDHC_PAD_CTRL),
356 		NEW_PAD_CTRL(VF610_PAD_PTA25__ESDHC1_CMD, ESDHC_PAD_CTRL),
357 		NEW_PAD_CTRL(VF610_PAD_PTA26__ESDHC1_DAT0, ESDHC_PAD_CTRL),
358 		NEW_PAD_CTRL(VF610_PAD_PTA27__ESDHC1_DAT1, ESDHC_PAD_CTRL),
359 		NEW_PAD_CTRL(VF610_PAD_PTA28__ESDHC1_DAT2, ESDHC_PAD_CTRL),
360 		NEW_PAD_CTRL(VF610_PAD_PTA29__ESDHC1_DAT3, ESDHC_PAD_CTRL),
361 	};
362 
363 	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
364 
365 	imx_iomux_v3_setup_multiple_pads(
366 		esdhc1_pads, ARRAY_SIZE(esdhc1_pads));
367 
368 	return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
369 }
370 #endif
371 
372 static inline int is_colibri_vf61(void)
373 {
374 	struct mscm *mscm = (struct mscm *)MSCM_BASE_ADDR;
375 
376 	/*
377 	 * Detect board type by Level 2 Cache: VF50 don't have any
378 	 * Level 2 Cache.
379 	 */
380 	return !!mscm->cpxcfg1;
381 }
382 
383 static void clock_init(void)
384 {
385 	struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
386 	struct anadig_reg *anadig = (struct anadig_reg *)ANADIG_BASE_ADDR;
387 	u32 pfd_clk_sel, ddr_clk_sel;
388 
389 	clrsetbits_le32(&ccm->ccgr0, CCM_REG_CTRL_MASK,
390 			CCM_CCGR0_UART0_CTRL_MASK);
391 #ifdef CONFIG_FSL_DSPI
392 	setbits_le32(&ccm->ccgr0, CCM_CCGR0_DSPI1_CTRL_MASK);
393 #endif
394 	clrsetbits_le32(&ccm->ccgr1, CCM_REG_CTRL_MASK,
395 			CCM_CCGR1_PIT_CTRL_MASK | CCM_CCGR1_WDOGA5_CTRL_MASK);
396 	clrsetbits_le32(&ccm->ccgr2, CCM_REG_CTRL_MASK,
397 			CCM_CCGR2_IOMUXC_CTRL_MASK | CCM_CCGR2_PORTA_CTRL_MASK |
398 			CCM_CCGR2_PORTB_CTRL_MASK | CCM_CCGR2_PORTC_CTRL_MASK |
399 			CCM_CCGR2_PORTD_CTRL_MASK | CCM_CCGR2_PORTE_CTRL_MASK);
400 	clrsetbits_le32(&ccm->ccgr3, CCM_REG_CTRL_MASK,
401 			CCM_CCGR3_ANADIG_CTRL_MASK | CCM_CCGR3_SCSC_CTRL_MASK);
402 	clrsetbits_le32(&ccm->ccgr4, CCM_REG_CTRL_MASK,
403 			CCM_CCGR4_WKUP_CTRL_MASK | CCM_CCGR4_CCM_CTRL_MASK |
404 			CCM_CCGR4_GPC_CTRL_MASK | CCM_CCGR4_I2C0_CTRL_MASK);
405 	clrsetbits_le32(&ccm->ccgr6, CCM_REG_CTRL_MASK,
406 			CCM_CCGR6_OCOTP_CTRL_MASK | CCM_CCGR6_DDRMC_CTRL_MASK);
407 	clrsetbits_le32(&ccm->ccgr7, CCM_REG_CTRL_MASK,
408 			CCM_CCGR7_SDHC1_CTRL_MASK);
409 	clrsetbits_le32(&ccm->ccgr9, CCM_REG_CTRL_MASK,
410 			CCM_CCGR9_FEC0_CTRL_MASK | CCM_CCGR9_FEC1_CTRL_MASK);
411 	clrsetbits_le32(&ccm->ccgr10, CCM_REG_CTRL_MASK,
412 			CCM_CCGR10_NFC_CTRL_MASK);
413 
414 #ifdef CONFIG_USB_EHCI_VF
415 	setbits_le32(&ccm->ccgr1, CCM_CCGR1_USBC0_CTRL_MASK);
416 	setbits_le32(&ccm->ccgr7, CCM_CCGR7_USBC1_CTRL_MASK);
417 
418 	clrsetbits_le32(&anadig->pll3_ctrl, ANADIG_PLL3_CTRL_BYPASS |
419 			ANADIG_PLL3_CTRL_POWERDOWN |
420 			ANADIG_PLL3_CTRL_DIV_SELECT,
421 			ANADIG_PLL3_CTRL_ENABLE);
422 	clrsetbits_le32(&anadig->pll7_ctrl, ANADIG_PLL7_CTRL_BYPASS |
423 			ANADIG_PLL7_CTRL_POWERDOWN |
424 			ANADIG_PLL7_CTRL_DIV_SELECT,
425 			ANADIG_PLL7_CTRL_ENABLE);
426 #endif
427 
428 	clrsetbits_le32(&anadig->pll5_ctrl, ANADIG_PLL5_CTRL_BYPASS |
429 			ANADIG_PLL5_CTRL_POWERDOWN, ANADIG_PLL5_CTRL_ENABLE |
430 			ANADIG_PLL5_CTRL_DIV_SELECT);
431 
432 	if (is_colibri_vf61()) {
433 		clrsetbits_le32(&anadig->pll2_ctrl, ANADIG_PLL5_CTRL_BYPASS |
434 				ANADIG_PLL2_CTRL_POWERDOWN,
435 				ANADIG_PLL2_CTRL_ENABLE |
436 				ANADIG_PLL2_CTRL_DIV_SELECT);
437 	}
438 
439 	clrsetbits_le32(&anadig->pll1_ctrl, ANADIG_PLL1_CTRL_POWERDOWN,
440 			ANADIG_PLL1_CTRL_ENABLE | ANADIG_PLL1_CTRL_DIV_SELECT);
441 
442 	clrsetbits_le32(&ccm->ccr, CCM_CCR_OSCNT_MASK,
443 			CCM_CCR_FIRC_EN | CCM_CCR_OSCNT(5));
444 
445 	/* See "Typical PLL Configuration" */
446 	if (is_colibri_vf61()) {
447 		pfd_clk_sel = CCM_CCSR_PLL1_PFD_CLK_SEL(1);
448 		ddr_clk_sel = CCM_CCSR_DDRC_CLK_SEL(0);
449 	} else {
450 		pfd_clk_sel = CCM_CCSR_PLL1_PFD_CLK_SEL(3);
451 		ddr_clk_sel = CCM_CCSR_DDRC_CLK_SEL(1);
452 	}
453 
454 	clrsetbits_le32(&ccm->ccsr, CCM_REG_CTRL_MASK, pfd_clk_sel |
455 			CCM_CCSR_PLL2_PFD4_EN | CCM_CCSR_PLL2_PFD3_EN |
456 			CCM_CCSR_PLL2_PFD2_EN | CCM_CCSR_PLL2_PFD1_EN |
457 			CCM_CCSR_PLL1_PFD4_EN | CCM_CCSR_PLL1_PFD3_EN |
458 			CCM_CCSR_PLL1_PFD2_EN | CCM_CCSR_PLL1_PFD1_EN |
459 			ddr_clk_sel | CCM_CCSR_FAST_CLK_SEL(1) |
460 			CCM_CCSR_SYS_CLK_SEL(4));
461 
462 	clrsetbits_le32(&ccm->cacrr, CCM_REG_CTRL_MASK,
463 			CCM_CACRR_IPG_CLK_DIV(1) | CCM_CACRR_BUS_CLK_DIV(2) |
464 			CCM_CACRR_ARM_CLK_DIV(0));
465 	clrsetbits_le32(&ccm->cscmr1, CCM_REG_CTRL_MASK,
466 			CCM_CSCMR1_ESDHC1_CLK_SEL(3) |
467 			CCM_CSCMR1_NFC_CLK_SEL(0));
468 	clrsetbits_le32(&ccm->cscdr1, CCM_REG_CTRL_MASK,
469 			CCM_CSCDR1_RMII_CLK_EN);
470 	clrsetbits_le32(&ccm->cscdr2, CCM_REG_CTRL_MASK,
471 			CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0) |
472 			CCM_CSCDR2_NFC_EN);
473 	clrsetbits_le32(&ccm->cscdr3, CCM_REG_CTRL_MASK,
474 			CCM_CSCDR3_NFC_PRE_DIV(3));
475 	clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK,
476 			CCM_CSCMR2_RMII_CLK_SEL(2));
477 
478 #ifdef CONFIG_VIDEO_FSL_DCU_FB
479 		setbits_le32(&ccm->ccgr1, CCM_CCGR1_TCON0_CTRL_MASK);
480 		setbits_le32(&ccm->ccgr3, CCM_CCGR3_DCU0_CTRL_MASK);
481 #endif
482 }
483 
484 static void mscm_init(void)
485 {
486 	struct mscm_ir *mscmir = (struct mscm_ir *)MSCM_IR_BASE_ADDR;
487 	int i;
488 
489 	for (i = 0; i < MSCM_IRSPRC_NUM; i++)
490 		writew(MSCM_IRSPRC_CP0_EN, &mscmir->irsprc[i]);
491 }
492 
493 int board_phy_config(struct phy_device *phydev)
494 {
495 	if (phydev->drv->config)
496 		phydev->drv->config(phydev);
497 
498 	return 0;
499 }
500 
501 int board_early_init_f(void)
502 {
503 	clock_init();
504 	mscm_init();
505 
506 	setup_iomux_uart();
507 	setup_iomux_enet();
508 	setup_iomux_i2c();
509 #ifdef CONFIG_NAND_VF610_NFC
510 	setup_iomux_nfc();
511 #endif
512 
513 #ifdef CONFIG_VYBRID_GPIO
514 	setup_iomux_gpio();
515 #endif
516 
517 #ifdef CONFIG_FSL_DSPI
518 	setup_iomux_dspi();
519 #endif
520 
521 #ifdef CONFIG_VIDEO_FSL_DCU_FB
522 	setup_tcon();
523 	setup_iomux_fsl_dcu();
524 #endif
525 
526 	return 0;
527 }
528 
529 #ifdef CONFIG_BOARD_LATE_INIT
530 int board_late_init(void)
531 {
532 	struct src *src = (struct src *)SRC_BASE_ADDR;
533 
534 	if (((src->sbmr2 & SRC_SBMR2_BMOD_MASK) >> SRC_SBMR2_BMOD_SHIFT)
535 			== SRC_SBMR2_BMOD_SERIAL) {
536 		printf("Serial Downloader recovery mode, disable autoboot\n");
537 		env_set("bootdelay", "-1");
538 	}
539 
540 	return 0;
541 }
542 #endif /* CONFIG_BOARD_LATE_INIT */
543 
544 int board_init(void)
545 {
546 	struct scsc_reg *scsc = (struct scsc_reg *)SCSC_BASE_ADDR;
547 
548 	/* address of boot parameters */
549 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
550 
551 	/*
552 	 * Enable external 32K Oscillator
553 	 *
554 	 * The internal clock experiences significant drift
555 	 * so we must use the external oscillator in order
556 	 * to maintain correct time in the hwclock
557 	 */
558 
559 	setbits_le32(&scsc->sosc_ctr, SCSC_SOSC_CTR_SOSC_EN);
560 
561 #ifdef CONFIG_USB_EHCI_VF
562 	gpio_request(USB_CDET_GPIO, "usb-cdet-gpio");
563 #endif
564 
565 	return 0;
566 }
567 
568 int checkboard(void)
569 {
570 	if (is_colibri_vf61())
571 		puts("Board: Colibri VF61\n");
572 	else
573 		puts("Board: Colibri VF50\n");
574 
575 	return 0;
576 }
577 
578 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
579 int ft_board_setup(void *blob, bd_t *bd)
580 {
581 	int ret = 0;
582 #ifdef CONFIG_FDT_FIXUP_PARTITIONS
583 	static struct node_info nodes[] = {
584 		{ "fsl,vf610-nfc", MTD_DEV_TYPE_NAND, }, /* NAND flash */
585 	};
586 
587 	/* Update partition nodes using info from mtdparts env var */
588 	puts("   Updating MTD partitions...\n");
589 	fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
590 #endif
591 #ifdef CONFIG_VIDEO_FSL_DCU_FB
592 	ret = fsl_dcu_fixedfb_setup(blob);
593 	if (ret)
594 		return ret;
595 #endif
596 
597 	return ft_common_board_setup(blob, bd);
598 }
599 #endif
600 
601 #ifdef CONFIG_USB_EHCI_VF
602 int board_ehci_hcd_init(int port)
603 {
604 	imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
605 
606 	switch (port) {
607 	case 0:
608 		/* USBC does not have PEN, also configured as USB client only */
609 		break;
610 	case 1:
611 		gpio_request(USB_PEN_GPIO, "usb-pen-gpio");
612 		gpio_direction_output(USB_PEN_GPIO, 0);
613 		break;
614 	}
615 	return 0;
616 }
617 
618 int board_usb_phy_mode(int port)
619 {
620 	switch (port) {
621 	case 0:
622 		/*
623 		 * Port 0 is used only in client mode on Colibri Vybrid modules
624 		 * Check for state of USB client gpio pin and accordingly return
625 		 * USB_INIT_DEVICE or USB_INIT_HOST.
626 		 */
627 		if (gpio_get_value(USB_CDET_GPIO))
628 			return USB_INIT_DEVICE;
629 		else
630 			return USB_INIT_HOST;
631 	case 1:
632 		/* Port 1 is used only in host mode on Colibri Vybrid modules */
633 		return USB_INIT_HOST;
634 	default:
635 		/*
636 		 * There are only two USB controllers on Vybrid. Ideally we will
637 		 * not reach here. However return USB_INIT_HOST if we do.
638 		 */
639 		return USB_INIT_HOST;
640 	}
641 }
642 #endif
643