1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (C) 2016-2018 Toradex AG 4 */ 5 6 #include <asm/arch/clock.h> 7 #include <asm/arch/crm_regs.h> 8 #include <asm/arch/imx-regs.h> 9 #include <asm/arch/mx7-pins.h> 10 #include <asm/arch/sys_proto.h> 11 #include <asm/gpio.h> 12 #include <asm/mach-imx/iomux-v3.h> 13 #include <asm/io.h> 14 #include <common.h> 15 #include <dm.h> 16 #include <dm/platform_data/serial_mxc.h> 17 #include <fdt_support.h> 18 #include <fsl_esdhc.h> 19 #include <jffs2/load_kernel.h> 20 #include <linux/sizes.h> 21 #include <mmc.h> 22 #include <miiphy.h> 23 #include <mtd_node.h> 24 #include <netdev.h> 25 #include <power/pmic.h> 26 #include <power/rn5t567_pmic.h> 27 #include <usb.h> 28 #include <usb/ehci-ci.h> 29 #include "../common/tdx-common.h" 30 31 DECLARE_GLOBAL_DATA_PTR; 32 33 #define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \ 34 PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS) 35 36 #define ENET_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) 37 #define ENET_PAD_CTRL_MII (PAD_CTL_DSE_3P3V_32OHM) 38 39 #define ENET_RX_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) 40 41 #define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \ 42 PAD_CTL_DSE_3P3V_49OHM) 43 44 #define NAND_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_SRE_SLOW | PAD_CTL_HYS) 45 46 #define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU5KOHM) 47 48 #define USB_CDET_GPIO IMX_GPIO_NR(7, 14) 49 50 int dram_init(void) 51 { 52 gd->ram_size = get_ram_size((void *)PHYS_SDRAM, imx_ddr_size()); 53 54 return 0; 55 } 56 57 static iomux_v3_cfg_t const uart1_pads[] = { 58 MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), 59 MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), 60 MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL), 61 MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL), 62 }; 63 64 #ifdef CONFIG_USB_EHCI_MX7 65 static iomux_v3_cfg_t const usb_cdet_pads[] = { 66 MX7D_PAD_ENET1_CRS__GPIO7_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL), 67 }; 68 #endif 69 70 #ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND 71 static iomux_v3_cfg_t const gpmi_pads[] = { 72 MX7D_PAD_SD3_DATA0__NAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL), 73 MX7D_PAD_SD3_DATA1__NAND_DATA01 | MUX_PAD_CTRL(NAND_PAD_CTRL), 74 MX7D_PAD_SD3_DATA2__NAND_DATA02 | MUX_PAD_CTRL(NAND_PAD_CTRL), 75 MX7D_PAD_SD3_DATA3__NAND_DATA03 | MUX_PAD_CTRL(NAND_PAD_CTRL), 76 MX7D_PAD_SD3_DATA4__NAND_DATA04 | MUX_PAD_CTRL(NAND_PAD_CTRL), 77 MX7D_PAD_SD3_DATA5__NAND_DATA05 | MUX_PAD_CTRL(NAND_PAD_CTRL), 78 MX7D_PAD_SD3_DATA6__NAND_DATA06 | MUX_PAD_CTRL(NAND_PAD_CTRL), 79 MX7D_PAD_SD3_DATA7__NAND_DATA07 | MUX_PAD_CTRL(NAND_PAD_CTRL), 80 MX7D_PAD_SD3_CLK__NAND_CLE | MUX_PAD_CTRL(NAND_PAD_CTRL), 81 MX7D_PAD_SD3_CMD__NAND_ALE | MUX_PAD_CTRL(NAND_PAD_CTRL), 82 MX7D_PAD_SD3_STROBE__NAND_RE_B | MUX_PAD_CTRL(NAND_PAD_CTRL), 83 MX7D_PAD_SD3_RESET_B__NAND_WE_B | MUX_PAD_CTRL(NAND_PAD_CTRL), 84 MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B | MUX_PAD_CTRL(NAND_PAD_CTRL), 85 MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B | MUX_PAD_CTRL(NAND_PAD_CTRL), 86 MX7D_PAD_SAI1_TX_DATA__NAND_READY_B | MUX_PAD_CTRL(NAND_PAD_READY0_CTRL), 87 }; 88 89 static void setup_gpmi_nand(void) 90 { 91 imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads)); 92 93 /* NAND_USDHC_BUS_CLK is set in rom */ 94 set_clk_nand(); 95 } 96 #endif 97 98 #ifdef CONFIG_VIDEO_MXS 99 static iomux_v3_cfg_t const lcd_pads[] = { 100 MX7D_PAD_LCD_CLK__LCD_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL), 101 MX7D_PAD_LCD_ENABLE__LCD_ENABLE | MUX_PAD_CTRL(LCD_PAD_CTRL), 102 MX7D_PAD_LCD_HSYNC__LCD_HSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL), 103 MX7D_PAD_LCD_VSYNC__LCD_VSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL), 104 MX7D_PAD_LCD_DATA00__LCD_DATA0 | MUX_PAD_CTRL(LCD_PAD_CTRL), 105 MX7D_PAD_LCD_DATA01__LCD_DATA1 | MUX_PAD_CTRL(LCD_PAD_CTRL), 106 MX7D_PAD_LCD_DATA02__LCD_DATA2 | MUX_PAD_CTRL(LCD_PAD_CTRL), 107 MX7D_PAD_LCD_DATA03__LCD_DATA3 | MUX_PAD_CTRL(LCD_PAD_CTRL), 108 MX7D_PAD_LCD_DATA04__LCD_DATA4 | MUX_PAD_CTRL(LCD_PAD_CTRL), 109 MX7D_PAD_LCD_DATA05__LCD_DATA5 | MUX_PAD_CTRL(LCD_PAD_CTRL), 110 MX7D_PAD_LCD_DATA06__LCD_DATA6 | MUX_PAD_CTRL(LCD_PAD_CTRL), 111 MX7D_PAD_LCD_DATA07__LCD_DATA7 | MUX_PAD_CTRL(LCD_PAD_CTRL), 112 MX7D_PAD_LCD_DATA08__LCD_DATA8 | MUX_PAD_CTRL(LCD_PAD_CTRL), 113 MX7D_PAD_LCD_DATA09__LCD_DATA9 | MUX_PAD_CTRL(LCD_PAD_CTRL), 114 MX7D_PAD_LCD_DATA10__LCD_DATA10 | MUX_PAD_CTRL(LCD_PAD_CTRL), 115 MX7D_PAD_LCD_DATA11__LCD_DATA11 | MUX_PAD_CTRL(LCD_PAD_CTRL), 116 MX7D_PAD_LCD_DATA12__LCD_DATA12 | MUX_PAD_CTRL(LCD_PAD_CTRL), 117 MX7D_PAD_LCD_DATA13__LCD_DATA13 | MUX_PAD_CTRL(LCD_PAD_CTRL), 118 MX7D_PAD_LCD_DATA14__LCD_DATA14 | MUX_PAD_CTRL(LCD_PAD_CTRL), 119 MX7D_PAD_LCD_DATA15__LCD_DATA15 | MUX_PAD_CTRL(LCD_PAD_CTRL), 120 MX7D_PAD_LCD_DATA16__LCD_DATA16 | MUX_PAD_CTRL(LCD_PAD_CTRL), 121 MX7D_PAD_LCD_DATA17__LCD_DATA17 | MUX_PAD_CTRL(LCD_PAD_CTRL), 122 }; 123 124 static iomux_v3_cfg_t const backlight_pads[] = { 125 /* Backlight On */ 126 MX7D_PAD_SD1_WP__GPIO5_IO1 | MUX_PAD_CTRL(NO_PAD_CTRL), 127 /* Backlight PWM<A> (multiplexed pin) */ 128 MX7D_PAD_GPIO1_IO08__GPIO1_IO8 | MUX_PAD_CTRL(NO_PAD_CTRL), 129 MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 | MUX_PAD_CTRL(NO_PAD_CTRL), 130 }; 131 132 #define GPIO_BL_ON IMX_GPIO_NR(5, 1) 133 #define GPIO_PWM_A IMX_GPIO_NR(1, 8) 134 135 static int setup_lcd(void) 136 { 137 imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads)); 138 139 imx_iomux_v3_setup_multiple_pads(backlight_pads, ARRAY_SIZE(backlight_pads)); 140 141 /* Set BL_ON */ 142 gpio_request(GPIO_BL_ON, "BL_ON"); 143 gpio_direction_output(GPIO_BL_ON, 1); 144 145 /* Set PWM<A> to full brightness (assuming inversed polarity) */ 146 gpio_request(GPIO_PWM_A, "PWM<A>"); 147 gpio_direction_output(GPIO_PWM_A, 0); 148 149 return 0; 150 } 151 #endif 152 153 #ifdef CONFIG_FEC_MXC 154 static iomux_v3_cfg_t const fec1_pads[] = { 155 #ifndef CONFIG_COLIBRI_IMX7_EXT_PHYCLK 156 MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 | MUX_PAD_CTRL(ENET_PAD_CTRL) | MUX_MODE_SION, 157 #else 158 MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 | MUX_PAD_CTRL(ENET_PAD_CTRL), 159 #endif 160 MX7D_PAD_SD2_CD_B__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), 161 MX7D_PAD_SD2_WP__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), 162 MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 163 MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 164 MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 165 MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 166 MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), 167 MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), 168 MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), 169 }; 170 171 static void setup_iomux_fec(void) 172 { 173 imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads)); 174 } 175 #endif 176 177 static void setup_iomux_uart(void) 178 { 179 imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); 180 } 181 182 #ifdef CONFIG_FEC_MXC 183 int board_eth_init(bd_t *bis) 184 { 185 int ret; 186 187 setup_iomux_fec(); 188 189 ret = fecmxc_initialize_multi(bis, 0, 190 CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE); 191 if (ret) 192 printf("FEC1 MXC: %s:failed\n", __func__); 193 194 return ret; 195 } 196 197 static int setup_fec(void) 198 { 199 struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs 200 = (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; 201 202 #ifndef CONFIG_COLIBRI_IMX7_EXT_PHYCLK 203 /* 204 * Use 50M anatop REF_CLK1 for ENET1, clear gpr1[13], set gpr1[17] 205 * and output it on the pin 206 */ 207 clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], 208 IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK, 209 IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK); 210 #else 211 /* Use 50M external CLK for ENET1, set gpr1[13], clear gpr1[17] */ 212 clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], 213 IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK, 214 IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK); 215 #endif 216 217 return set_clk_enet(ENET_50MHZ); 218 } 219 220 int board_phy_config(struct phy_device *phydev) 221 { 222 if (phydev->drv->config) 223 phydev->drv->config(phydev); 224 return 0; 225 } 226 #endif 227 228 int board_early_init_f(void) 229 { 230 setup_iomux_uart(); 231 232 return 0; 233 } 234 235 int board_init(void) 236 { 237 /* address of boot parameters */ 238 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 239 240 #ifdef CONFIG_FEC_MXC 241 setup_fec(); 242 #endif 243 244 #ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND 245 setup_gpmi_nand(); 246 #endif 247 248 #ifdef CONFIG_VIDEO_MXS 249 setup_lcd(); 250 #endif 251 252 #ifdef CONFIG_USB_EHCI_MX7 253 imx_iomux_v3_setup_multiple_pads(usb_cdet_pads, ARRAY_SIZE(usb_cdet_pads)); 254 gpio_request(USB_CDET_GPIO, "usb-cdet-gpio"); 255 #endif 256 257 return 0; 258 } 259 260 #ifdef CONFIG_DM_PMIC 261 int power_init_board(void) 262 { 263 struct udevice *dev; 264 int reg, ver; 265 int ret; 266 267 268 ret = pmic_get("rn5t567", &dev); 269 if (ret) 270 return ret; 271 ver = pmic_reg_read(dev, RN5T567_LSIVER); 272 reg = pmic_reg_read(dev, RN5T567_OTPVER); 273 274 printf("PMIC: RN5T567 LSIVER=0x%02x OTPVER=0x%02x\n", ver, reg); 275 276 /* set judge and press timer of N_OE to minimal values */ 277 pmic_clrsetbits(dev, RN5T567_NOETIMSETCNT, 0x7, 0); 278 279 /* configure sleep slot for 3.3V Ethernet */ 280 reg = pmic_reg_read(dev, RN5T567_LDO1_SLOT); 281 reg = (reg & 0xf0) | reg >> 4; 282 pmic_reg_write(dev, RN5T567_LDO1_SLOT, reg); 283 284 /* disable DCDC2 discharge to avoid backfeeding through VFB2 */ 285 pmic_clrsetbits(dev, RN5T567_DC2CTL, 0x2, 0); 286 287 /* configure sleep slot for ARM rail */ 288 reg = pmic_reg_read(dev, RN5T567_DC2_SLOT); 289 reg = (reg & 0xf0) | reg >> 4; 290 pmic_reg_write(dev, RN5T567_DC2_SLOT, reg); 291 292 /* disable LDO2 discharge to avoid backfeeding from +V3.3_SD */ 293 pmic_clrsetbits(dev, RN5T567_LDODIS1, 0x2, 0); 294 295 return 0; 296 } 297 298 void reset_cpu(ulong addr) 299 { 300 struct udevice *dev; 301 302 pmic_get("rn5t567", &dev); 303 304 /* Use PMIC to reset, set REPWRTIM to 0 and REPWRON to 1 */ 305 pmic_reg_write(dev, RN5T567_REPCNT, 0x1); 306 pmic_reg_write(dev, RN5T567_SLPCNT, 0x1); 307 308 /* 309 * Re-power factor detection on PMIC side is not instant. 1ms 310 * proved to be enough time until reset takes effect. 311 */ 312 mdelay(1); 313 } 314 #endif 315 316 int checkboard(void) 317 { 318 printf("Model: Toradex Colibri iMX7%c\n", 319 is_cpu_type(MXC_CPU_MX7D) ? 'D' : 'S'); 320 321 return 0; 322 } 323 324 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) 325 int ft_board_setup(void *blob, bd_t *bd) 326 { 327 #if defined(CONFIG_FDT_FIXUP_PARTITIONS) 328 static const struct node_info nodes[] = { 329 { "fsl,imx7d-gpmi-nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */ 330 { "fsl,imx6q-gpmi-nand", MTD_DEV_TYPE_NAND, }, 331 }; 332 333 /* Update partition nodes using info from mtdparts env var */ 334 puts(" Updating MTD partitions...\n"); 335 fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); 336 #endif 337 338 return ft_common_board_setup(blob, bd); 339 } 340 #endif 341 342 #ifdef CONFIG_USB_EHCI_MX7 343 static iomux_v3_cfg_t const usb_otg2_pads[] = { 344 MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), 345 }; 346 347 int board_ehci_hcd_init(int port) 348 { 349 switch (port) { 350 case 0: 351 break; 352 case 1: 353 if (is_cpu_type(MXC_CPU_MX7S)) 354 return -ENODEV; 355 356 imx_iomux_v3_setup_multiple_pads(usb_otg2_pads, 357 ARRAY_SIZE(usb_otg2_pads)); 358 break; 359 default: 360 return -EINVAL; 361 } 362 return 0; 363 } 364 365 int board_usb_phy_mode(int port) 366 { 367 switch (port) { 368 case 0: 369 if (gpio_get_value(USB_CDET_GPIO)) 370 return USB_INIT_DEVICE; 371 else 372 return USB_INIT_HOST; 373 case 1: 374 default: 375 return USB_INIT_HOST; 376 } 377 } 378 #endif 379