1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (C) 2016 Toradex AG 4 */ 5 6 #include <asm/arch/clock.h> 7 #include <asm/arch/crm_regs.h> 8 #include <asm/arch/imx-regs.h> 9 #include <asm/arch/mx7-pins.h> 10 #include <asm/arch/sys_proto.h> 11 #include <asm/gpio.h> 12 #include <asm/mach-imx/boot_mode.h> 13 #include <asm/mach-imx/iomux-v3.h> 14 #include <asm/io.h> 15 #include <common.h> 16 #include <dm.h> 17 #include <dm/platform_data/serial_mxc.h> 18 #include <fdt_support.h> 19 #include <fsl_esdhc.h> 20 #include <jffs2/load_kernel.h> 21 #include <linux/sizes.h> 22 #include <mmc.h> 23 #include <miiphy.h> 24 #include <mtd_node.h> 25 #include <netdev.h> 26 #include <power/pmic.h> 27 #include <power/rn5t567_pmic.h> 28 #include <usb.h> 29 #include <usb/ehci-ci.h> 30 #include "../common/tdx-common.h" 31 32 DECLARE_GLOBAL_DATA_PTR; 33 34 #define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \ 35 PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS) 36 37 #define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ 38 PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM) 39 40 #define ENET_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) 41 #define ENET_PAD_CTRL_MII (PAD_CTL_DSE_3P3V_32OHM) 42 43 #define ENET_RX_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) 44 45 #define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \ 46 PAD_CTL_DSE_3P3V_49OHM) 47 48 #define NAND_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_SRE_SLOW | PAD_CTL_HYS) 49 50 #define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU5KOHM) 51 52 #define USB_CDET_GPIO IMX_GPIO_NR(7, 14) 53 54 int dram_init(void) 55 { 56 gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); 57 58 return 0; 59 } 60 61 static iomux_v3_cfg_t const uart1_pads[] = { 62 MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), 63 MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), 64 MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL), 65 MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL), 66 }; 67 68 static iomux_v3_cfg_t const usdhc1_pads[] = { 69 MX7D_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), 70 MX7D_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 71 MX7D_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 72 MX7D_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 73 MX7D_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 74 MX7D_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 75 76 MX7D_PAD_GPIO1_IO00__GPIO1_IO0 | MUX_PAD_CTRL(NO_PAD_CTRL), 77 }; 78 79 #ifdef CONFIG_USB_EHCI_MX7 80 static iomux_v3_cfg_t const usb_cdet_pads[] = { 81 MX7D_PAD_ENET1_CRS__GPIO7_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL), 82 }; 83 #endif 84 85 #ifdef CONFIG_NAND_MXS 86 static iomux_v3_cfg_t const gpmi_pads[] = { 87 MX7D_PAD_SD3_DATA0__NAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL), 88 MX7D_PAD_SD3_DATA1__NAND_DATA01 | MUX_PAD_CTRL(NAND_PAD_CTRL), 89 MX7D_PAD_SD3_DATA2__NAND_DATA02 | MUX_PAD_CTRL(NAND_PAD_CTRL), 90 MX7D_PAD_SD3_DATA3__NAND_DATA03 | MUX_PAD_CTRL(NAND_PAD_CTRL), 91 MX7D_PAD_SD3_DATA4__NAND_DATA04 | MUX_PAD_CTRL(NAND_PAD_CTRL), 92 MX7D_PAD_SD3_DATA5__NAND_DATA05 | MUX_PAD_CTRL(NAND_PAD_CTRL), 93 MX7D_PAD_SD3_DATA6__NAND_DATA06 | MUX_PAD_CTRL(NAND_PAD_CTRL), 94 MX7D_PAD_SD3_DATA7__NAND_DATA07 | MUX_PAD_CTRL(NAND_PAD_CTRL), 95 MX7D_PAD_SD3_CLK__NAND_CLE | MUX_PAD_CTRL(NAND_PAD_CTRL), 96 MX7D_PAD_SD3_CMD__NAND_ALE | MUX_PAD_CTRL(NAND_PAD_CTRL), 97 MX7D_PAD_SD3_STROBE__NAND_RE_B | MUX_PAD_CTRL(NAND_PAD_CTRL), 98 MX7D_PAD_SD3_RESET_B__NAND_WE_B | MUX_PAD_CTRL(NAND_PAD_CTRL), 99 MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B | MUX_PAD_CTRL(NAND_PAD_CTRL), 100 MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B | MUX_PAD_CTRL(NAND_PAD_CTRL), 101 MX7D_PAD_SAI1_TX_DATA__NAND_READY_B | MUX_PAD_CTRL(NAND_PAD_READY0_CTRL), 102 }; 103 104 static void setup_gpmi_nand(void) 105 { 106 imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads)); 107 108 /* NAND_USDHC_BUS_CLK is set in rom */ 109 set_clk_nand(); 110 } 111 #endif 112 113 #ifdef CONFIG_VIDEO_MXS 114 static iomux_v3_cfg_t const lcd_pads[] = { 115 MX7D_PAD_LCD_CLK__LCD_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL), 116 MX7D_PAD_LCD_ENABLE__LCD_ENABLE | MUX_PAD_CTRL(LCD_PAD_CTRL), 117 MX7D_PAD_LCD_HSYNC__LCD_HSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL), 118 MX7D_PAD_LCD_VSYNC__LCD_VSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL), 119 MX7D_PAD_LCD_DATA00__LCD_DATA0 | MUX_PAD_CTRL(LCD_PAD_CTRL), 120 MX7D_PAD_LCD_DATA01__LCD_DATA1 | MUX_PAD_CTRL(LCD_PAD_CTRL), 121 MX7D_PAD_LCD_DATA02__LCD_DATA2 | MUX_PAD_CTRL(LCD_PAD_CTRL), 122 MX7D_PAD_LCD_DATA03__LCD_DATA3 | MUX_PAD_CTRL(LCD_PAD_CTRL), 123 MX7D_PAD_LCD_DATA04__LCD_DATA4 | MUX_PAD_CTRL(LCD_PAD_CTRL), 124 MX7D_PAD_LCD_DATA05__LCD_DATA5 | MUX_PAD_CTRL(LCD_PAD_CTRL), 125 MX7D_PAD_LCD_DATA06__LCD_DATA6 | MUX_PAD_CTRL(LCD_PAD_CTRL), 126 MX7D_PAD_LCD_DATA07__LCD_DATA7 | MUX_PAD_CTRL(LCD_PAD_CTRL), 127 MX7D_PAD_LCD_DATA08__LCD_DATA8 | MUX_PAD_CTRL(LCD_PAD_CTRL), 128 MX7D_PAD_LCD_DATA09__LCD_DATA9 | MUX_PAD_CTRL(LCD_PAD_CTRL), 129 MX7D_PAD_LCD_DATA10__LCD_DATA10 | MUX_PAD_CTRL(LCD_PAD_CTRL), 130 MX7D_PAD_LCD_DATA11__LCD_DATA11 | MUX_PAD_CTRL(LCD_PAD_CTRL), 131 MX7D_PAD_LCD_DATA12__LCD_DATA12 | MUX_PAD_CTRL(LCD_PAD_CTRL), 132 MX7D_PAD_LCD_DATA13__LCD_DATA13 | MUX_PAD_CTRL(LCD_PAD_CTRL), 133 MX7D_PAD_LCD_DATA14__LCD_DATA14 | MUX_PAD_CTRL(LCD_PAD_CTRL), 134 MX7D_PAD_LCD_DATA15__LCD_DATA15 | MUX_PAD_CTRL(LCD_PAD_CTRL), 135 MX7D_PAD_LCD_DATA16__LCD_DATA16 | MUX_PAD_CTRL(LCD_PAD_CTRL), 136 MX7D_PAD_LCD_DATA17__LCD_DATA17 | MUX_PAD_CTRL(LCD_PAD_CTRL), 137 }; 138 139 static iomux_v3_cfg_t const backlight_pads[] = { 140 /* Backlight On */ 141 MX7D_PAD_SD1_WP__GPIO5_IO1 | MUX_PAD_CTRL(NO_PAD_CTRL), 142 /* Backlight PWM<A> (multiplexed pin) */ 143 MX7D_PAD_GPIO1_IO08__GPIO1_IO8 | MUX_PAD_CTRL(NO_PAD_CTRL), 144 MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 | MUX_PAD_CTRL(NO_PAD_CTRL), 145 }; 146 147 #define GPIO_BL_ON IMX_GPIO_NR(5, 1) 148 #define GPIO_PWM_A IMX_GPIO_NR(1, 8) 149 150 static int setup_lcd(void) 151 { 152 imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads)); 153 154 imx_iomux_v3_setup_multiple_pads(backlight_pads, ARRAY_SIZE(backlight_pads)); 155 156 /* Set BL_ON */ 157 gpio_request(GPIO_BL_ON, "BL_ON"); 158 gpio_direction_output(GPIO_BL_ON, 1); 159 160 /* Set PWM<A> to full brightness (assuming inversed polarity) */ 161 gpio_request(GPIO_PWM_A, "PWM<A>"); 162 gpio_direction_output(GPIO_PWM_A, 0); 163 164 return 0; 165 } 166 #endif 167 168 #ifdef CONFIG_FEC_MXC 169 static iomux_v3_cfg_t const fec1_pads[] = { 170 #ifndef CONFIG_COLIBRI_IMX7_EXT_PHYCLK 171 MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 | MUX_PAD_CTRL(ENET_PAD_CTRL) | MUX_MODE_SION, 172 #else 173 MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 | MUX_PAD_CTRL(ENET_PAD_CTRL), 174 #endif 175 MX7D_PAD_SD2_CD_B__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), 176 MX7D_PAD_SD2_WP__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), 177 MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 178 MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 179 MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 180 MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 181 MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), 182 MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), 183 MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), 184 }; 185 186 static void setup_iomux_fec(void) 187 { 188 imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads)); 189 } 190 #endif 191 192 static void setup_iomux_uart(void) 193 { 194 imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); 195 } 196 197 #ifdef CONFIG_FSL_ESDHC 198 199 #define USDHC1_CD_GPIO IMX_GPIO_NR(1, 0) 200 201 static struct fsl_esdhc_cfg usdhc_cfg[] = { 202 {USDHC1_BASE_ADDR, 0, 4}, 203 }; 204 205 int board_mmc_getcd(struct mmc *mmc) 206 { 207 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 208 int ret = 0; 209 210 switch (cfg->esdhc_base) { 211 case USDHC1_BASE_ADDR: 212 ret = !gpio_get_value(USDHC1_CD_GPIO); 213 break; 214 } 215 216 return ret; 217 } 218 219 int board_mmc_init(bd_t *bis) 220 { 221 int i, ret; 222 /* USDHC1 is mmc0 */ 223 for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { 224 switch (i) { 225 case 0: 226 imx_iomux_v3_setup_multiple_pads( 227 usdhc1_pads, ARRAY_SIZE(usdhc1_pads)); 228 gpio_request(USDHC1_CD_GPIO, "usdhc1_cd"); 229 gpio_direction_input(USDHC1_CD_GPIO); 230 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); 231 break; 232 default: 233 printf("Warning: you configured more USDHC controllers" 234 "(%d) than supported by the board\n", i + 1); 235 return -EINVAL; 236 } 237 238 ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); 239 if (ret) 240 return ret; 241 } 242 243 return 0; 244 } 245 #endif 246 247 #ifdef CONFIG_FEC_MXC 248 int board_eth_init(bd_t *bis) 249 { 250 int ret; 251 252 setup_iomux_fec(); 253 254 ret = fecmxc_initialize_multi(bis, 0, 255 CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE); 256 if (ret) 257 printf("FEC1 MXC: %s:failed\n", __func__); 258 259 return ret; 260 } 261 262 static int setup_fec(void) 263 { 264 struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs 265 = (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; 266 267 #ifndef CONFIG_COLIBRI_IMX7_EXT_PHYCLK 268 /* 269 * Use 50M anatop REF_CLK1 for ENET1, clear gpr1[13], set gpr1[17] 270 * and output it on the pin 271 */ 272 clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], 273 IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK, 274 IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK); 275 #else 276 /* Use 50M external CLK for ENET1, set gpr1[13], clear gpr1[17] */ 277 clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], 278 IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK, 279 IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK); 280 #endif 281 282 return set_clk_enet(ENET_50MHZ); 283 } 284 285 int board_phy_config(struct phy_device *phydev) 286 { 287 if (phydev->drv->config) 288 phydev->drv->config(phydev); 289 return 0; 290 } 291 #endif 292 293 int board_early_init_f(void) 294 { 295 setup_iomux_uart(); 296 297 return 0; 298 } 299 300 int board_init(void) 301 { 302 /* address of boot parameters */ 303 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 304 305 #ifdef CONFIG_FEC_MXC 306 setup_fec(); 307 #endif 308 309 #ifdef CONFIG_NAND_MXS 310 setup_gpmi_nand(); 311 #endif 312 313 #ifdef CONFIG_VIDEO_MXS 314 setup_lcd(); 315 #endif 316 317 #ifdef CONFIG_USB_EHCI_MX7 318 imx_iomux_v3_setup_multiple_pads(usb_cdet_pads, ARRAY_SIZE(usb_cdet_pads)); 319 gpio_request(USB_CDET_GPIO, "usb-cdet-gpio"); 320 #endif 321 322 return 0; 323 } 324 325 #ifdef CONFIG_CMD_BMODE 326 static const struct boot_mode board_boot_modes[] = { 327 /* 4 bit bus width */ 328 {"nand", MAKE_CFGVAL(0x40, 0x34, 0x00, 0x00)}, 329 {"sd1", MAKE_CFGVAL(0x10, 0x10, 0x00, 0x00)}, 330 {NULL, 0}, 331 }; 332 #endif 333 334 int board_late_init(void) 335 { 336 #ifdef CONFIG_CMD_BMODE 337 add_board_boot_modes(board_boot_modes); 338 #endif 339 340 return 0; 341 } 342 343 #ifdef CONFIG_DM_PMIC 344 int power_init_board(void) 345 { 346 struct udevice *dev; 347 int reg, ver; 348 int ret; 349 350 351 ret = pmic_get("rn5t567", &dev); 352 if (ret) 353 return ret; 354 ver = pmic_reg_read(dev, RN5T567_LSIVER); 355 reg = pmic_reg_read(dev, RN5T567_OTPVER); 356 357 printf("PMIC: RN5T567 LSIVER=0x%02x OTPVER=0x%02x\n", ver, reg); 358 359 /* set judge and press timer of N_OE to minimal values */ 360 pmic_clrsetbits(dev, RN5T567_NOETIMSETCNT, 0x7, 0); 361 362 /* configure sleep slot for 3.3V Ethernet */ 363 reg = pmic_reg_read(dev, RN5T567_LDO1_SLOT); 364 reg = (reg & 0xf0) | reg >> 4; 365 pmic_reg_write(dev, RN5T567_LDO1_SLOT, reg); 366 367 /* disable DCDC2 discharge to avoid backfeeding through VFB2 */ 368 pmic_clrsetbits(dev, RN5T567_DC2CTL, 0x2, 0); 369 370 /* configure sleep slot for ARM rail */ 371 reg = pmic_reg_read(dev, RN5T567_DC2_SLOT); 372 reg = (reg & 0xf0) | reg >> 4; 373 pmic_reg_write(dev, RN5T567_DC2_SLOT, reg); 374 375 /* disable LDO2 discharge to avoid backfeeding from +V3.3_SD */ 376 pmic_clrsetbits(dev, RN5T567_LDODIS1, 0x2, 0); 377 378 return 0; 379 } 380 381 void reset_cpu(ulong addr) 382 { 383 struct udevice *dev; 384 385 pmic_get("rn5t567", &dev); 386 387 /* Use PMIC to reset, set REPWRTIM to 0 and REPWRON to 1 */ 388 pmic_reg_write(dev, RN5T567_REPCNT, 0x1); 389 pmic_reg_write(dev, RN5T567_SLPCNT, 0x1); 390 391 /* 392 * Re-power factor detection on PMIC side is not instant. 1ms 393 * proved to be enough time until reset takes effect. 394 */ 395 mdelay(1); 396 } 397 #endif 398 399 int checkboard(void) 400 { 401 printf("Model: Toradex Colibri iMX7%c\n", 402 is_cpu_type(MXC_CPU_MX7D) ? 'D' : 'S'); 403 404 return 0; 405 } 406 407 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) 408 int ft_board_setup(void *blob, bd_t *bd) 409 { 410 #if defined(CONFIG_FDT_FIXUP_PARTITIONS) 411 static struct node_info nodes[] = { 412 { "fsl,imx7d-gpmi-nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */ 413 }; 414 415 /* Update partition nodes using info from mtdparts env var */ 416 puts(" Updating MTD partitions...\n"); 417 fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); 418 #endif 419 420 return ft_common_board_setup(blob, bd); 421 } 422 #endif 423 424 #ifdef CONFIG_USB_EHCI_MX7 425 static iomux_v3_cfg_t const usb_otg2_pads[] = { 426 MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), 427 }; 428 429 int board_ehci_hcd_init(int port) 430 { 431 switch (port) { 432 case 0: 433 break; 434 case 1: 435 if (is_cpu_type(MXC_CPU_MX7S)) 436 return -ENODEV; 437 438 imx_iomux_v3_setup_multiple_pads(usb_otg2_pads, 439 ARRAY_SIZE(usb_otg2_pads)); 440 break; 441 default: 442 return -EINVAL; 443 } 444 return 0; 445 } 446 447 int board_usb_phy_mode(int port) 448 { 449 switch (port) { 450 case 0: 451 if (gpio_get_value(USB_CDET_GPIO)) 452 return USB_INIT_DEVICE; 453 else 454 return USB_INIT_HOST; 455 case 1: 456 default: 457 return USB_INIT_HOST; 458 } 459 } 460 #endif 461