1 /*
2  * Copyright (c) 2016 Toradex, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <asm/arch-tegra/ap.h>
9 #include <asm/gpio.h>
10 #include <asm/io.h>
11 #include <asm/arch/gpio.h>
12 #include <asm/arch/pinmux.h>
13 #include <power/as3722.h>
14 
15 #include "../common/tdx-common.h"
16 #include "pinmux-config-apalis-tk1.h"
17 
18 #define LAN_RESET_N TEGRA_GPIO(S, 2)
19 
20 int arch_misc_init(void)
21 {
22 	if (readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BOOTTYPE) ==
23 	    NVBOOTTYPE_RECOVERY)
24 		printf("USB recovery mode\n");
25 
26 	return 0;
27 }
28 
29 int checkboard(void)
30 {
31 	puts("Model: Toradex Apalis TK1 2GB\n");
32 
33 	return 0;
34 }
35 
36 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
37 int ft_board_setup(void *blob, bd_t *bd)
38 {
39 	return ft_common_board_setup(blob, bd);
40 }
41 #endif
42 
43 /*
44  * Routine: pinmux_init
45  * Description: Do individual peripheral pinmux configs
46  */
47 void pinmux_init(void)
48 {
49 	pinmux_clear_tristate_input_clamping();
50 
51 	gpio_config_table(apalis_tk1_gpio_inits,
52 			  ARRAY_SIZE(apalis_tk1_gpio_inits));
53 
54 	pinmux_config_pingrp_table(apalis_tk1_pingrps,
55 				   ARRAY_SIZE(apalis_tk1_pingrps));
56 
57 	pinmux_config_drvgrp_table(apalis_tk1_drvgrps,
58 				   ARRAY_SIZE(apalis_tk1_drvgrps));
59 }
60 
61 #ifdef CONFIG_PCI_TEGRA
62 int tegra_pcie_board_init(void)
63 {
64 	struct udevice *pmic;
65 	int err;
66 
67 	err = as3722_init(&pmic);
68 	if (err) {
69 		error("failed to initialize AS3722 PMIC: %d\n", err);
70 		return err;
71 	}
72 
73 	err = as3722_sd_enable(pmic, 4);
74 	if (err < 0) {
75 		error("failed to enable SD4: %d\n", err);
76 		return err;
77 	}
78 
79 	err = as3722_sd_set_voltage(pmic, 4, 0x24);
80 	if (err < 0) {
81 		error("failed to set SD4 voltage: %d\n", err);
82 		return err;
83 	}
84 
85 	err = as3722_gpio_configure(pmic, 1, AS3722_GPIO_OUTPUT_VDDH |
86 					     AS3722_GPIO_INVERT);
87 	if (err < 0) {
88 		error("failed to configure GPIO#1 as output: %d\n", err);
89 		return err;
90 	}
91 
92 	err = as3722_gpio_direction_output(pmic, 2, 1);
93 	if (err < 0) {
94 		error("failed to set GPIO#2 high: %d\n", err);
95 		return err;
96 	}
97 
98 	/* Reset I210 Gigabit Ethernet Controller */
99 	gpio_request(LAN_RESET_N, "LAN_RESET_N");
100 	gpio_direction_output(LAN_RESET_N, 0);
101 
102 	/*
103 	 * Make sure we don't get any back feeding from LAN_WAKE_N resp.
104 	 * DEV_OFF_N
105 	 */
106 	gpio_request(TEGRA_GPIO(O, 5), "LAN_WAKE_N");
107 	gpio_direction_output(TEGRA_GPIO(O, 5), 0);
108 
109 	gpio_request(TEGRA_GPIO(O, 6), "LAN_DEV_OFF_N");
110 	gpio_direction_output(TEGRA_GPIO(O, 6), 0);
111 
112 	/* Make sure LDO9 and LDO10 are initially enabled @ 0V */
113 	err = as3722_ldo_enable(pmic, 9);
114 	if (err < 0) {
115 		error("failed to enable LDO9: %d\n", err);
116 		return err;
117 	}
118 	err = as3722_ldo_enable(pmic, 10);
119 	if (err < 0) {
120 		error("failed to enable LDO10: %d\n", err);
121 		return err;
122 	}
123 	err = as3722_ldo_set_voltage(pmic, 9, 0x80);
124 	if (err < 0) {
125 		error("failed to set LDO9 voltage: %d\n", err);
126 		return err;
127 	}
128 	err = as3722_ldo_set_voltage(pmic, 10, 0x80);
129 	if (err < 0) {
130 		error("failed to set LDO10 voltage: %d\n", err);
131 		return err;
132 	}
133 
134 	mdelay(100);
135 
136 	/* Make sure controller gets enabled by disabling DEV_OFF_N */
137 	gpio_set_value(TEGRA_GPIO(O, 6), 1);
138 
139 	/* Enable LDO9 and LDO10 for +V3.3_ETH on patched prototypes */
140 	err = as3722_ldo_set_voltage(pmic, 9, 0xff);
141 	if (err < 0) {
142 		error("failed to set LDO9 voltage: %d\n", err);
143 		return err;
144 	}
145 	err = as3722_ldo_set_voltage(pmic, 10, 0xff);
146 	if (err < 0) {
147 		error("failed to set LDO10 voltage: %d\n", err);
148 		return err;
149 	}
150 
151 	mdelay(100);
152 	gpio_set_value(LAN_RESET_N, 1);
153 
154 #ifdef APALIS_TK1_PCIE_EVALBOARD_INIT
155 #define PEX_PERST_N	TEGRA_GPIO(DD, 1) /* Apalis GPIO7 */
156 #define RESET_MOCI_CTRL	TEGRA_GPIO(U, 4)
157 
158 	/* Reset PLX PEX 8605 PCIe Switch plus PCIe devices on Apalis Evaluation
159 	   Board */
160 	gpio_request(PEX_PERST_N, "PEX_PERST_N");
161 	gpio_request(RESET_MOCI_CTRL, "RESET_MOCI_CTRL");
162 	gpio_direction_output(PEX_PERST_N, 0);
163 	gpio_direction_output(RESET_MOCI_CTRL, 0);
164 	/* Must be asserted for 100 ms after power and clocks are stable */
165 	mdelay(100);
166 	gpio_set_value(PEX_PERST_N, 1);
167 	/* Err_5: PEX_REFCLK_OUTpx/nx Clock Outputs is not Guaranteed Until
168 	   900 us After PEX_PERST# De-assertion */
169 	mdelay(1);
170 	gpio_set_value(RESET_MOCI_CTRL, 1);
171 #endif /* APALIS_T30_PCIE_EVALBOARD_INIT */
172 
173 	return 0;
174 }
175 #endif /* CONFIG_PCI_TEGRA */
176